Sakari Ailus | 13abada | 2011-05-05 15:39:25 -0300 | [diff] [blame] | 1 | /* |
| 2 | * drivers/media/video/adp1653.c |
| 3 | * |
| 4 | * Copyright (C) 2008--2011 Nokia Corporation |
| 5 | * |
| 6 | * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> |
| 7 | * |
| 8 | * Contributors: |
| 9 | * Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> |
| 10 | * Tuukka Toivonen <tuukkat76@gmail.com> |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or |
| 13 | * modify it under the terms of the GNU General Public License |
| 14 | * version 2 as published by the Free Software Foundation. |
| 15 | * |
| 16 | * This program is distributed in the hope that it will be useful, but |
| 17 | * WITHOUT ANY WARRANTY; without even the implied warranty of |
| 18 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 19 | * General Public License for more details. |
| 20 | * |
| 21 | * You should have received a copy of the GNU General Public License |
| 22 | * along with this program; if not, write to the Free Software |
| 23 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| 24 | * 02110-1301 USA |
| 25 | * |
| 26 | * TODO: |
| 27 | * - fault interrupt handling |
| 28 | * - hardware strobe |
| 29 | * - power doesn't need to be ON if all lights are off |
| 30 | * |
| 31 | */ |
| 32 | |
| 33 | #include <linux/delay.h> |
Paul Gortmaker | 7a707b8 | 2011-07-03 14:03:12 -0400 | [diff] [blame^] | 34 | #include <linux/module.h> |
Sakari Ailus | 13abada | 2011-05-05 15:39:25 -0300 | [diff] [blame] | 35 | #include <linux/i2c.h> |
| 36 | #include <linux/slab.h> |
| 37 | #include <linux/version.h> |
| 38 | #include <media/adp1653.h> |
| 39 | #include <media/v4l2-device.h> |
| 40 | |
| 41 | #define TIMEOUT_MAX 820000 |
| 42 | #define TIMEOUT_STEP 54600 |
| 43 | #define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \ |
| 44 | * TIMEOUT_STEP) |
| 45 | #define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \ |
| 46 | / TIMEOUT_STEP) |
| 47 | #define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP) |
| 48 | |
| 49 | /* Write values into ADP1653 registers. */ |
| 50 | static int adp1653_update_hw(struct adp1653_flash *flash) |
| 51 | { |
| 52 | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); |
| 53 | u8 out_sel; |
| 54 | u8 config = 0; |
| 55 | int rval; |
| 56 | |
| 57 | out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( |
| 58 | flash->indicator_intensity->val) |
| 59 | << ADP1653_REG_OUT_SEL_ILED_SHIFT; |
| 60 | |
| 61 | switch (flash->led_mode->val) { |
| 62 | case V4L2_FLASH_LED_MODE_NONE: |
| 63 | break; |
| 64 | case V4L2_FLASH_LED_MODE_FLASH: |
| 65 | /* Flash mode, light on with strobe, duration from timer */ |
| 66 | config = ADP1653_REG_CONFIG_TMR_CFG; |
| 67 | config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val) |
| 68 | << ADP1653_REG_CONFIG_TMR_SET_SHIFT; |
| 69 | break; |
| 70 | case V4L2_FLASH_LED_MODE_TORCH: |
| 71 | /* Torch mode, light immediately on, duration indefinite */ |
| 72 | out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( |
| 73 | flash->torch_intensity->val) |
| 74 | << ADP1653_REG_OUT_SEL_HPLED_SHIFT; |
| 75 | break; |
| 76 | } |
| 77 | |
| 78 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); |
| 79 | if (rval < 0) |
| 80 | return rval; |
| 81 | |
| 82 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config); |
| 83 | if (rval < 0) |
| 84 | return rval; |
| 85 | |
| 86 | return 0; |
| 87 | } |
| 88 | |
| 89 | static int adp1653_get_fault(struct adp1653_flash *flash) |
| 90 | { |
| 91 | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); |
| 92 | int fault; |
| 93 | int rval; |
| 94 | |
| 95 | fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT); |
| 96 | if (IS_ERR_VALUE(fault)) |
| 97 | return fault; |
| 98 | |
| 99 | flash->fault |= fault; |
| 100 | |
| 101 | if (!flash->fault) |
| 102 | return 0; |
| 103 | |
| 104 | /* Clear faults. */ |
| 105 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); |
| 106 | if (IS_ERR_VALUE(rval)) |
| 107 | return rval; |
| 108 | |
| 109 | flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE; |
| 110 | |
| 111 | rval = adp1653_update_hw(flash); |
| 112 | if (IS_ERR_VALUE(rval)) |
| 113 | return rval; |
| 114 | |
| 115 | return flash->fault; |
| 116 | } |
| 117 | |
| 118 | static int adp1653_strobe(struct adp1653_flash *flash, int enable) |
| 119 | { |
| 120 | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); |
| 121 | u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG( |
| 122 | flash->indicator_intensity->val) |
| 123 | << ADP1653_REG_OUT_SEL_ILED_SHIFT; |
| 124 | int rval; |
| 125 | |
| 126 | if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH) |
| 127 | return -EBUSY; |
| 128 | |
| 129 | if (!enable) |
| 130 | return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, |
| 131 | out_sel); |
| 132 | |
| 133 | out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG( |
| 134 | flash->flash_intensity->val) |
| 135 | << ADP1653_REG_OUT_SEL_HPLED_SHIFT; |
| 136 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel); |
| 137 | if (rval) |
| 138 | return rval; |
| 139 | |
| 140 | /* Software strobe using i2c */ |
| 141 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, |
| 142 | ADP1653_REG_SW_STROBE_SW_STROBE); |
| 143 | if (rval) |
| 144 | return rval; |
| 145 | return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0); |
| 146 | } |
| 147 | |
| 148 | /* -------------------------------------------------------------------------- |
| 149 | * V4L2 controls |
| 150 | */ |
| 151 | |
| 152 | static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl) |
| 153 | { |
| 154 | struct adp1653_flash *flash = |
| 155 | container_of(ctrl->handler, struct adp1653_flash, ctrls); |
| 156 | int rval; |
| 157 | |
| 158 | rval = adp1653_get_fault(flash); |
| 159 | if (IS_ERR_VALUE(rval)) |
| 160 | return rval; |
| 161 | |
| 162 | ctrl->cur.val = 0; |
| 163 | |
| 164 | if (flash->fault & ADP1653_REG_FAULT_FLT_SCP) |
| 165 | ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT; |
| 166 | if (flash->fault & ADP1653_REG_FAULT_FLT_OT) |
| 167 | ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE; |
| 168 | if (flash->fault & ADP1653_REG_FAULT_FLT_TMR) |
| 169 | ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT; |
| 170 | if (flash->fault & ADP1653_REG_FAULT_FLT_OV) |
| 171 | ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE; |
| 172 | |
| 173 | flash->fault = 0; |
| 174 | |
| 175 | return 0; |
| 176 | } |
| 177 | |
| 178 | static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl) |
| 179 | { |
| 180 | struct adp1653_flash *flash = |
| 181 | container_of(ctrl->handler, struct adp1653_flash, ctrls); |
| 182 | int rval; |
| 183 | |
| 184 | rval = adp1653_get_fault(flash); |
| 185 | if (IS_ERR_VALUE(rval)) |
| 186 | return rval; |
| 187 | if ((rval & (ADP1653_REG_FAULT_FLT_SCP | |
| 188 | ADP1653_REG_FAULT_FLT_OT | |
| 189 | ADP1653_REG_FAULT_FLT_OV)) && |
| 190 | (ctrl->id == V4L2_CID_FLASH_STROBE || |
| 191 | ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY || |
| 192 | ctrl->id == V4L2_CID_FLASH_LED_MODE)) |
| 193 | return -EBUSY; |
| 194 | |
| 195 | switch (ctrl->id) { |
| 196 | case V4L2_CID_FLASH_STROBE: |
| 197 | return adp1653_strobe(flash, 1); |
| 198 | case V4L2_CID_FLASH_STROBE_STOP: |
| 199 | return adp1653_strobe(flash, 0); |
| 200 | } |
| 201 | |
| 202 | return adp1653_update_hw(flash); |
| 203 | } |
| 204 | |
| 205 | static const struct v4l2_ctrl_ops adp1653_ctrl_ops = { |
| 206 | .g_volatile_ctrl = adp1653_get_ctrl, |
| 207 | .s_ctrl = adp1653_set_ctrl, |
| 208 | }; |
| 209 | |
| 210 | static int adp1653_init_controls(struct adp1653_flash *flash) |
| 211 | { |
| 212 | struct v4l2_ctrl *fault; |
| 213 | |
| 214 | v4l2_ctrl_handler_init(&flash->ctrls, 9); |
| 215 | |
| 216 | flash->led_mode = |
| 217 | v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, |
| 218 | V4L2_CID_FLASH_LED_MODE, |
| 219 | V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0); |
| 220 | v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops, |
| 221 | V4L2_CID_FLASH_STROBE_SOURCE, |
| 222 | V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0); |
| 223 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 224 | V4L2_CID_FLASH_STROBE, 0, 0, 0, 0); |
| 225 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 226 | V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0); |
| 227 | flash->flash_timeout = |
| 228 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 229 | V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN, |
| 230 | flash->platform_data->max_flash_timeout, |
| 231 | TIMEOUT_STEP, |
| 232 | flash->platform_data->max_flash_timeout); |
| 233 | flash->flash_intensity = |
| 234 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 235 | V4L2_CID_FLASH_INTENSITY, |
| 236 | ADP1653_FLASH_INTENSITY_MIN, |
| 237 | flash->platform_data->max_flash_intensity, |
| 238 | 1, flash->platform_data->max_flash_intensity); |
| 239 | flash->torch_intensity = |
| 240 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 241 | V4L2_CID_FLASH_TORCH_INTENSITY, |
| 242 | ADP1653_TORCH_INTENSITY_MIN, |
| 243 | flash->platform_data->max_torch_intensity, |
| 244 | ADP1653_FLASH_INTENSITY_STEP, |
| 245 | flash->platform_data->max_torch_intensity); |
| 246 | flash->indicator_intensity = |
| 247 | v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 248 | V4L2_CID_FLASH_INDICATOR_INTENSITY, |
| 249 | ADP1653_INDICATOR_INTENSITY_MIN, |
| 250 | flash->platform_data->max_indicator_intensity, |
| 251 | ADP1653_INDICATOR_INTENSITY_STEP, |
| 252 | ADP1653_INDICATOR_INTENSITY_MIN); |
| 253 | fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops, |
| 254 | V4L2_CID_FLASH_FAULT, 0, |
| 255 | V4L2_FLASH_FAULT_OVER_VOLTAGE |
| 256 | | V4L2_FLASH_FAULT_OVER_TEMPERATURE |
| 257 | | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0); |
| 258 | |
| 259 | if (flash->ctrls.error) |
| 260 | return flash->ctrls.error; |
| 261 | |
| 262 | fault->is_volatile = 1; |
| 263 | |
| 264 | flash->subdev.ctrl_handler = &flash->ctrls; |
| 265 | return 0; |
| 266 | } |
| 267 | |
| 268 | /* -------------------------------------------------------------------------- |
| 269 | * V4L2 subdev operations |
| 270 | */ |
| 271 | |
| 272 | static int |
| 273 | adp1653_init_device(struct adp1653_flash *flash) |
| 274 | { |
| 275 | struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev); |
| 276 | int rval; |
| 277 | |
| 278 | /* Clear FAULT register by writing zero to OUT_SEL */ |
| 279 | rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0); |
| 280 | if (rval < 0) { |
| 281 | dev_err(&client->dev, "failed writing fault register\n"); |
| 282 | return -EIO; |
| 283 | } |
| 284 | |
| 285 | mutex_lock(&flash->ctrls.lock); |
| 286 | /* Reset faults before reading new ones. */ |
| 287 | flash->fault = 0; |
| 288 | rval = adp1653_get_fault(flash); |
| 289 | mutex_unlock(&flash->ctrls.lock); |
| 290 | if (rval > 0) { |
| 291 | dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval); |
| 292 | return -EIO; |
| 293 | } |
| 294 | |
| 295 | mutex_lock(&flash->ctrls.lock); |
| 296 | rval = adp1653_update_hw(flash); |
| 297 | mutex_unlock(&flash->ctrls.lock); |
| 298 | if (rval) { |
| 299 | dev_err(&client->dev, |
| 300 | "adp1653_update_hw failed at %s\n", __func__); |
| 301 | return -EIO; |
| 302 | } |
| 303 | |
| 304 | return 0; |
| 305 | } |
| 306 | |
| 307 | static int |
| 308 | __adp1653_set_power(struct adp1653_flash *flash, int on) |
| 309 | { |
| 310 | int ret; |
| 311 | |
| 312 | ret = flash->platform_data->power(&flash->subdev, on); |
| 313 | if (ret < 0) |
| 314 | return ret; |
| 315 | |
| 316 | if (!on) |
| 317 | return 0; |
| 318 | |
| 319 | ret = adp1653_init_device(flash); |
| 320 | if (ret < 0) |
| 321 | flash->platform_data->power(&flash->subdev, 0); |
| 322 | |
| 323 | return ret; |
| 324 | } |
| 325 | |
| 326 | static int |
| 327 | adp1653_set_power(struct v4l2_subdev *subdev, int on) |
| 328 | { |
| 329 | struct adp1653_flash *flash = to_adp1653_flash(subdev); |
| 330 | int ret = 0; |
| 331 | |
| 332 | mutex_lock(&flash->power_lock); |
| 333 | |
| 334 | /* If the power count is modified from 0 to != 0 or from != 0 to 0, |
| 335 | * update the power state. |
| 336 | */ |
| 337 | if (flash->power_count == !on) { |
| 338 | ret = __adp1653_set_power(flash, !!on); |
| 339 | if (ret < 0) |
| 340 | goto done; |
| 341 | } |
| 342 | |
| 343 | /* Update the power count. */ |
| 344 | flash->power_count += on ? 1 : -1; |
| 345 | WARN_ON(flash->power_count < 0); |
| 346 | |
| 347 | done: |
| 348 | mutex_unlock(&flash->power_lock); |
| 349 | return ret; |
| 350 | } |
| 351 | |
| 352 | static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| 353 | { |
| 354 | return adp1653_set_power(sd, 1); |
| 355 | } |
| 356 | |
| 357 | static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| 358 | { |
| 359 | return adp1653_set_power(sd, 0); |
| 360 | } |
| 361 | |
| 362 | static const struct v4l2_subdev_core_ops adp1653_core_ops = { |
| 363 | .s_power = adp1653_set_power, |
| 364 | }; |
| 365 | |
| 366 | static const struct v4l2_subdev_ops adp1653_ops = { |
| 367 | .core = &adp1653_core_ops, |
| 368 | }; |
| 369 | |
| 370 | static const struct v4l2_subdev_internal_ops adp1653_internal_ops = { |
| 371 | .open = adp1653_open, |
| 372 | .close = adp1653_close, |
| 373 | }; |
| 374 | |
| 375 | /* -------------------------------------------------------------------------- |
| 376 | * I2C driver |
| 377 | */ |
| 378 | #ifdef CONFIG_PM |
| 379 | |
| 380 | static int adp1653_suspend(struct device *dev) |
| 381 | { |
| 382 | struct i2c_client *client = to_i2c_client(dev); |
| 383 | struct v4l2_subdev *subdev = i2c_get_clientdata(client); |
| 384 | struct adp1653_flash *flash = to_adp1653_flash(subdev); |
| 385 | |
| 386 | if (!flash->power_count) |
| 387 | return 0; |
| 388 | |
| 389 | return __adp1653_set_power(flash, 0); |
| 390 | } |
| 391 | |
| 392 | static int adp1653_resume(struct device *dev) |
| 393 | { |
| 394 | struct i2c_client *client = to_i2c_client(dev); |
| 395 | struct v4l2_subdev *subdev = i2c_get_clientdata(client); |
| 396 | struct adp1653_flash *flash = to_adp1653_flash(subdev); |
| 397 | |
| 398 | if (!flash->power_count) |
| 399 | return 0; |
| 400 | |
| 401 | return __adp1653_set_power(flash, 1); |
| 402 | } |
| 403 | |
| 404 | #else |
| 405 | |
| 406 | #define adp1653_suspend NULL |
| 407 | #define adp1653_resume NULL |
| 408 | |
| 409 | #endif /* CONFIG_PM */ |
| 410 | |
| 411 | static int adp1653_probe(struct i2c_client *client, |
| 412 | const struct i2c_device_id *devid) |
| 413 | { |
| 414 | struct adp1653_flash *flash; |
| 415 | int ret; |
| 416 | |
| 417 | flash = kzalloc(sizeof(*flash), GFP_KERNEL); |
| 418 | if (flash == NULL) |
| 419 | return -ENOMEM; |
| 420 | |
| 421 | flash->platform_data = client->dev.platform_data; |
| 422 | |
| 423 | mutex_init(&flash->power_lock); |
| 424 | |
| 425 | v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops); |
| 426 | flash->subdev.internal_ops = &adp1653_internal_ops; |
| 427 | flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| 428 | |
| 429 | adp1653_init_controls(flash); |
| 430 | |
| 431 | ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0); |
| 432 | if (ret < 0) |
| 433 | kfree(flash); |
| 434 | |
| 435 | return ret; |
| 436 | } |
| 437 | |
| 438 | static int __exit adp1653_remove(struct i2c_client *client) |
| 439 | { |
| 440 | struct v4l2_subdev *subdev = i2c_get_clientdata(client); |
| 441 | struct adp1653_flash *flash = to_adp1653_flash(subdev); |
| 442 | |
| 443 | v4l2_device_unregister_subdev(&flash->subdev); |
| 444 | v4l2_ctrl_handler_free(&flash->ctrls); |
| 445 | media_entity_cleanup(&flash->subdev.entity); |
| 446 | kfree(flash); |
| 447 | return 0; |
| 448 | } |
| 449 | |
| 450 | static const struct i2c_device_id adp1653_id_table[] = { |
| 451 | { ADP1653_NAME, 0 }, |
| 452 | { } |
| 453 | }; |
| 454 | MODULE_DEVICE_TABLE(i2c, adp1653_id_table); |
| 455 | |
| 456 | static struct dev_pm_ops adp1653_pm_ops = { |
| 457 | .suspend = adp1653_suspend, |
| 458 | .resume = adp1653_resume, |
| 459 | }; |
| 460 | |
| 461 | static struct i2c_driver adp1653_i2c_driver = { |
| 462 | .driver = { |
| 463 | .name = ADP1653_NAME, |
| 464 | .pm = &adp1653_pm_ops, |
| 465 | }, |
| 466 | .probe = adp1653_probe, |
| 467 | .remove = __exit_p(adp1653_remove), |
| 468 | .id_table = adp1653_id_table, |
| 469 | }; |
| 470 | |
| 471 | static int __init adp1653_init(void) |
| 472 | { |
| 473 | int rval; |
| 474 | |
| 475 | rval = i2c_add_driver(&adp1653_i2c_driver); |
| 476 | if (rval) |
| 477 | printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__); |
| 478 | |
| 479 | return rval; |
| 480 | } |
| 481 | |
| 482 | static void __exit adp1653_exit(void) |
| 483 | { |
| 484 | i2c_del_driver(&adp1653_i2c_driver); |
| 485 | } |
| 486 | |
| 487 | module_init(adp1653_init); |
| 488 | module_exit(adp1653_exit); |
| 489 | |
| 490 | MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>"); |
| 491 | MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver"); |
| 492 | MODULE_LICENSE("GPL"); |