| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 1 | /* | 
 | 2 |  * An I2C driver for the Philips PCF8563 RTC | 
 | 3 |  * Copyright 2005-06 Tower Technologies | 
 | 4 |  * | 
 | 5 |  * Author: Alessandro Zummo <a.zummo@towertech.it> | 
 | 6 |  * Maintainers: http://www.nslu2-linux.org/ | 
 | 7 |  * | 
 | 8 |  * based on the other drivers in this same directory. | 
 | 9 |  * | 
 | 10 |  * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf | 
 | 11 |  * | 
 | 12 |  * This program is free software; you can redistribute it and/or modify | 
 | 13 |  * it under the terms of the GNU General Public License version 2 as | 
 | 14 |  * published by the Free Software Foundation. | 
 | 15 |  */ | 
 | 16 |  | 
 | 17 | #include <linux/i2c.h> | 
 | 18 | #include <linux/bcd.h> | 
 | 19 | #include <linux/rtc.h> | 
 | 20 |  | 
 | 21 | #define DRV_VERSION "0.4.2" | 
 | 22 |  | 
 | 23 | /* Addresses to scan: none | 
 | 24 |  * This chip cannot be reliably autodetected. An empty eeprom | 
 | 25 |  * located at 0x51 will pass the validation routine due to | 
 | 26 |  * the way the registers are implemented. | 
 | 27 |  */ | 
 | 28 | static unsigned short normal_i2c[] = { I2C_CLIENT_END }; | 
 | 29 |  | 
 | 30 | /* Module parameters */ | 
 | 31 | I2C_CLIENT_INSMOD; | 
 | 32 |  | 
 | 33 | #define PCF8563_REG_ST1		0x00 /* status */ | 
 | 34 | #define PCF8563_REG_ST2		0x01 | 
 | 35 |  | 
 | 36 | #define PCF8563_REG_SC		0x02 /* datetime */ | 
 | 37 | #define PCF8563_REG_MN		0x03 | 
 | 38 | #define PCF8563_REG_HR		0x04 | 
 | 39 | #define PCF8563_REG_DM		0x05 | 
 | 40 | #define PCF8563_REG_DW		0x06 | 
 | 41 | #define PCF8563_REG_MO		0x07 | 
 | 42 | #define PCF8563_REG_YR		0x08 | 
 | 43 |  | 
 | 44 | #define PCF8563_REG_AMN		0x09 /* alarm */ | 
 | 45 | #define PCF8563_REG_AHR		0x0A | 
 | 46 | #define PCF8563_REG_ADM		0x0B | 
 | 47 | #define PCF8563_REG_ADW		0x0C | 
 | 48 |  | 
 | 49 | #define PCF8563_REG_CLKO	0x0D /* clock out */ | 
 | 50 | #define PCF8563_REG_TMRC	0x0E /* timer control */ | 
 | 51 | #define PCF8563_REG_TMR		0x0F /* timer */ | 
 | 52 |  | 
 | 53 | #define PCF8563_SC_LV		0x80 /* low voltage */ | 
 | 54 | #define PCF8563_MO_C		0x80 /* century */ | 
 | 55 |  | 
 | 56 | static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind); | 
 | 57 | static int pcf8563_detach(struct i2c_client *client); | 
 | 58 |  | 
 | 59 | /* | 
 | 60 |  * In the routines that deal directly with the pcf8563 hardware, we use | 
 | 61 |  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. | 
 | 62 |  */ | 
 | 63 | static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) | 
 | 64 | { | 
 | 65 | 	unsigned char buf[13] = { PCF8563_REG_ST1 }; | 
 | 66 |  | 
 | 67 | 	struct i2c_msg msgs[] = { | 
 | 68 | 		{ client->addr, 0, 1, buf },	/* setup read ptr */ | 
 | 69 | 		{ client->addr, I2C_M_RD, 13, buf },	/* read status + date */ | 
 | 70 | 	}; | 
 | 71 |  | 
 | 72 | 	/* read registers */ | 
 | 73 | 	if ((i2c_transfer(client->adapter, msgs, 2)) != 2) { | 
 | 74 | 		dev_err(&client->dev, "%s: read error\n", __FUNCTION__); | 
 | 75 | 		return -EIO; | 
 | 76 | 	} | 
 | 77 |  | 
 | 78 | 	if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) | 
 | 79 | 		dev_info(&client->dev, | 
 | 80 | 			"low voltage detected, date/time is not reliable.\n"); | 
 | 81 |  | 
 | 82 | 	dev_dbg(&client->dev, | 
 | 83 | 		"%s: raw data is st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " | 
 | 84 | 		"mday=%02x, wday=%02x, mon=%02x, year=%02x\n", | 
 | 85 | 		__FUNCTION__, | 
 | 86 | 		buf[0], buf[1], buf[2], buf[3], | 
 | 87 | 		buf[4], buf[5], buf[6], buf[7], | 
 | 88 | 		buf[8]); | 
 | 89 |  | 
 | 90 |  | 
 | 91 | 	tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F); | 
 | 92 | 	tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F); | 
 | 93 | 	tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ | 
 | 94 | 	tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F); | 
 | 95 | 	tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; | 
 | 96 | 	tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ | 
 | 97 | 	tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR]) | 
| Jean-Baptiste Maneyrol | 1713e90 | 2006-09-30 23:28:12 -0700 | [diff] [blame] | 98 | 		+ (buf[PCF8563_REG_MO] & PCF8563_MO_C ? 0 : 100); | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 99 |  | 
 | 100 | 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " | 
 | 101 | 		"mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 102 | 		__FUNCTION__, | 
 | 103 | 		tm->tm_sec, tm->tm_min, tm->tm_hour, | 
 | 104 | 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | 
 | 105 |  | 
 | 106 | 	/* the clock can give out invalid datetime, but we cannot return | 
 | 107 | 	 * -EINVAL otherwise hwclock will refuse to set the time on bootup. | 
 | 108 | 	 */ | 
 | 109 | 	if (rtc_valid_tm(tm) < 0) | 
 | 110 | 		dev_err(&client->dev, "retrieved date/time is not valid.\n"); | 
 | 111 |  | 
 | 112 | 	return 0; | 
 | 113 | } | 
 | 114 |  | 
 | 115 | static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm) | 
 | 116 | { | 
 | 117 | 	int i, err; | 
 | 118 | 	unsigned char buf[9]; | 
 | 119 |  | 
 | 120 | 	dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " | 
 | 121 | 		"mday=%d, mon=%d, year=%d, wday=%d\n", | 
 | 122 | 		__FUNCTION__, | 
 | 123 | 		tm->tm_sec, tm->tm_min, tm->tm_hour, | 
 | 124 | 		tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); | 
 | 125 |  | 
 | 126 | 	/* hours, minutes and seconds */ | 
 | 127 | 	buf[PCF8563_REG_SC] = BIN2BCD(tm->tm_sec); | 
 | 128 | 	buf[PCF8563_REG_MN] = BIN2BCD(tm->tm_min); | 
 | 129 | 	buf[PCF8563_REG_HR] = BIN2BCD(tm->tm_hour); | 
 | 130 |  | 
 | 131 | 	buf[PCF8563_REG_DM] = BIN2BCD(tm->tm_mday); | 
 | 132 |  | 
 | 133 | 	/* month, 1 - 12 */ | 
 | 134 | 	buf[PCF8563_REG_MO] = BIN2BCD(tm->tm_mon + 1); | 
 | 135 |  | 
 | 136 | 	/* year and century */ | 
 | 137 | 	buf[PCF8563_REG_YR] = BIN2BCD(tm->tm_year % 100); | 
| Jean-Baptiste Maneyrol | 1713e90 | 2006-09-30 23:28:12 -0700 | [diff] [blame] | 138 | 	if (tm->tm_year < 100) | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 139 | 		buf[PCF8563_REG_MO] |= PCF8563_MO_C; | 
 | 140 |  | 
 | 141 | 	buf[PCF8563_REG_DW] = tm->tm_wday & 0x07; | 
 | 142 |  | 
 | 143 | 	/* write register's data */ | 
 | 144 | 	for (i = 0; i < 7; i++) { | 
 | 145 | 		unsigned char data[2] = { PCF8563_REG_SC + i, | 
 | 146 | 						buf[PCF8563_REG_SC + i] }; | 
 | 147 |  | 
 | 148 | 		err = i2c_master_send(client, data, sizeof(data)); | 
 | 149 | 		if (err != sizeof(data)) { | 
 | 150 | 			dev_err(&client->dev, | 
 | 151 | 				"%s: err=%d addr=%02x, data=%02x\n", | 
 | 152 | 				__FUNCTION__, err, data[0], data[1]); | 
 | 153 | 			return -EIO; | 
 | 154 | 		} | 
 | 155 | 	}; | 
 | 156 |  | 
 | 157 | 	return 0; | 
 | 158 | } | 
 | 159 |  | 
 | 160 | struct pcf8563_limit | 
 | 161 | { | 
 | 162 | 	unsigned char reg; | 
 | 163 | 	unsigned char mask; | 
 | 164 | 	unsigned char min; | 
 | 165 | 	unsigned char max; | 
 | 166 | }; | 
 | 167 |  | 
 | 168 | static int pcf8563_validate_client(struct i2c_client *client) | 
 | 169 | { | 
 | 170 | 	int i; | 
 | 171 |  | 
 | 172 | 	static const struct pcf8563_limit pattern[] = { | 
 | 173 | 		/* register, mask, min, max */ | 
 | 174 | 		{ PCF8563_REG_SC,	0x7F,	0,	59	}, | 
 | 175 | 		{ PCF8563_REG_MN,	0x7F,	0,	59	}, | 
 | 176 | 		{ PCF8563_REG_HR,	0x3F,	0,	23	}, | 
 | 177 | 		{ PCF8563_REG_DM,	0x3F,	0,	31	}, | 
 | 178 | 		{ PCF8563_REG_MO,	0x1F,	0,	12	}, | 
 | 179 | 	}; | 
 | 180 |  | 
 | 181 | 	/* check limits (only registers with bcd values) */ | 
 | 182 | 	for (i = 0; i < ARRAY_SIZE(pattern); i++) { | 
 | 183 | 		int xfer; | 
 | 184 | 		unsigned char value; | 
 | 185 | 		unsigned char buf = pattern[i].reg; | 
 | 186 |  | 
 | 187 | 		struct i2c_msg msgs[] = { | 
 | 188 | 			{ client->addr, 0, 1, &buf }, | 
 | 189 | 			{ client->addr, I2C_M_RD, 1, &buf }, | 
 | 190 | 		}; | 
 | 191 |  | 
 | 192 | 		xfer = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); | 
 | 193 |  | 
 | 194 | 		if (xfer != ARRAY_SIZE(msgs)) { | 
| David Brownell | a14e189 | 2006-12-10 02:19:02 -0800 | [diff] [blame] | 195 | 			dev_err(&client->dev, | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 196 | 				"%s: could not read register 0x%02X\n", | 
 | 197 | 				__FUNCTION__, pattern[i].reg); | 
 | 198 |  | 
 | 199 | 			return -EIO; | 
 | 200 | 		} | 
 | 201 |  | 
 | 202 | 		value = BCD2BIN(buf & pattern[i].mask); | 
 | 203 |  | 
 | 204 | 		if (value > pattern[i].max || | 
 | 205 | 			value < pattern[i].min) { | 
| David Brownell | a14e189 | 2006-12-10 02:19:02 -0800 | [diff] [blame] | 206 | 			dev_dbg(&client->dev, | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 207 | 				"%s: pattern=%d, reg=%x, mask=0x%02x, min=%d, " | 
 | 208 | 				"max=%d, value=%d, raw=0x%02X\n", | 
 | 209 | 				__FUNCTION__, i, pattern[i].reg, pattern[i].mask, | 
 | 210 | 				pattern[i].min, pattern[i].max, | 
 | 211 | 				value, buf); | 
 | 212 |  | 
 | 213 | 			return -ENODEV; | 
 | 214 | 		} | 
 | 215 | 	} | 
 | 216 |  | 
 | 217 | 	return 0; | 
 | 218 | } | 
 | 219 |  | 
 | 220 | static int pcf8563_rtc_read_time(struct device *dev, struct rtc_time *tm) | 
 | 221 | { | 
 | 222 | 	return pcf8563_get_datetime(to_i2c_client(dev), tm); | 
 | 223 | } | 
 | 224 |  | 
 | 225 | static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm) | 
 | 226 | { | 
 | 227 | 	return pcf8563_set_datetime(to_i2c_client(dev), tm); | 
 | 228 | } | 
 | 229 |  | 
| David Brownell | ff8371a | 2006-09-30 23:28:17 -0700 | [diff] [blame] | 230 | static const struct rtc_class_ops pcf8563_rtc_ops = { | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 231 | 	.read_time	= pcf8563_rtc_read_time, | 
 | 232 | 	.set_time	= pcf8563_rtc_set_time, | 
 | 233 | }; | 
 | 234 |  | 
 | 235 | static int pcf8563_attach(struct i2c_adapter *adapter) | 
 | 236 | { | 
 | 237 | 	return i2c_probe(adapter, &addr_data, pcf8563_probe); | 
 | 238 | } | 
 | 239 |  | 
 | 240 | static struct i2c_driver pcf8563_driver = { | 
 | 241 | 	.driver		= { | 
 | 242 | 		.name	= "pcf8563", | 
 | 243 | 	}, | 
 | 244 | 	.id		= I2C_DRIVERID_PCF8563, | 
 | 245 | 	.attach_adapter = &pcf8563_attach, | 
 | 246 | 	.detach_client	= &pcf8563_detach, | 
 | 247 | }; | 
 | 248 |  | 
 | 249 | static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) | 
 | 250 | { | 
 | 251 | 	struct i2c_client *client; | 
 | 252 | 	struct rtc_device *rtc; | 
 | 253 |  | 
 | 254 | 	int err = 0; | 
 | 255 |  | 
| David Brownell | a14e189 | 2006-12-10 02:19:02 -0800 | [diff] [blame] | 256 | 	dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__); | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 257 |  | 
 | 258 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { | 
 | 259 | 		err = -ENODEV; | 
 | 260 | 		goto exit; | 
 | 261 | 	} | 
 | 262 |  | 
 | 263 | 	if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { | 
 | 264 | 		err = -ENOMEM; | 
 | 265 | 		goto exit; | 
 | 266 | 	} | 
 | 267 |  | 
 | 268 | 	client->addr = address; | 
 | 269 | 	client->driver = &pcf8563_driver; | 
 | 270 | 	client->adapter	= adapter; | 
 | 271 |  | 
 | 272 | 	strlcpy(client->name, pcf8563_driver.driver.name, I2C_NAME_SIZE); | 
 | 273 |  | 
 | 274 | 	/* Verify the chip is really an PCF8563 */ | 
 | 275 | 	if (kind < 0) { | 
 | 276 | 		if (pcf8563_validate_client(client) < 0) { | 
 | 277 | 			err = -ENODEV; | 
 | 278 | 			goto exit_kfree; | 
 | 279 | 		} | 
 | 280 | 	} | 
 | 281 |  | 
 | 282 | 	/* Inform the i2c layer */ | 
 | 283 | 	if ((err = i2c_attach_client(client))) | 
 | 284 | 		goto exit_kfree; | 
 | 285 |  | 
 | 286 | 	dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); | 
 | 287 |  | 
 | 288 | 	rtc = rtc_device_register(pcf8563_driver.driver.name, &client->dev, | 
 | 289 | 				&pcf8563_rtc_ops, THIS_MODULE); | 
 | 290 |  | 
 | 291 | 	if (IS_ERR(rtc)) { | 
 | 292 | 		err = PTR_ERR(rtc); | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 293 | 		goto exit_detach; | 
 | 294 | 	} | 
 | 295 |  | 
 | 296 | 	i2c_set_clientdata(client, rtc); | 
 | 297 |  | 
 | 298 | 	return 0; | 
 | 299 |  | 
 | 300 | exit_detach: | 
 | 301 | 	i2c_detach_client(client); | 
 | 302 |  | 
 | 303 | exit_kfree: | 
 | 304 | 	kfree(client); | 
 | 305 |  | 
 | 306 | exit: | 
 | 307 | 	return err; | 
 | 308 | } | 
 | 309 |  | 
 | 310 | static int pcf8563_detach(struct i2c_client *client) | 
 | 311 | { | 
 | 312 | 	int err; | 
 | 313 | 	struct rtc_device *rtc = i2c_get_clientdata(client); | 
 | 314 |  | 
| Alessandro Zummo | b5a82d6 | 2006-03-27 01:16:44 -0800 | [diff] [blame] | 315 | 	if (rtc) | 
 | 316 | 		rtc_device_unregister(rtc); | 
 | 317 |  | 
 | 318 | 	if ((err = i2c_detach_client(client))) | 
 | 319 | 		return err; | 
 | 320 |  | 
 | 321 | 	kfree(client); | 
 | 322 |  | 
 | 323 | 	return 0; | 
 | 324 | } | 
 | 325 |  | 
 | 326 | static int __init pcf8563_init(void) | 
 | 327 | { | 
 | 328 | 	return i2c_add_driver(&pcf8563_driver); | 
 | 329 | } | 
 | 330 |  | 
 | 331 | static void __exit pcf8563_exit(void) | 
 | 332 | { | 
 | 333 | 	i2c_del_driver(&pcf8563_driver); | 
 | 334 | } | 
 | 335 |  | 
 | 336 | MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); | 
 | 337 | MODULE_DESCRIPTION("Philips PCF8563/Epson RTC8564 RTC driver"); | 
 | 338 | MODULE_LICENSE("GPL"); | 
 | 339 | MODULE_VERSION(DRV_VERSION); | 
 | 340 |  | 
 | 341 | module_init(pcf8563_init); | 
 | 342 | module_exit(pcf8563_exit); |