| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | *  linux/zorro.h -- Amiga AutoConfig (Zorro) Bus Definitions | 
|  | 3 | * | 
|  | 4 | *  Copyright (C) 1995--2003 Geert Uytterhoeven | 
|  | 5 | * | 
|  | 6 | *  This file is subject to the terms and conditions of the GNU General Public | 
|  | 7 | *  License.  See the file COPYING in the main directory of this archive | 
|  | 8 | *  for more details. | 
|  | 9 | */ | 
|  | 10 |  | 
|  | 11 | #ifndef _LINUX_ZORRO_H | 
|  | 12 | #define _LINUX_ZORRO_H | 
|  | 13 |  | 
|  | 14 | #ifndef __ASSEMBLY__ | 
|  | 15 |  | 
|  | 16 | #include <linux/device.h> | 
|  | 17 |  | 
|  | 18 |  | 
|  | 19 | /* | 
|  | 20 | *  Each Zorro board has a 32-bit ID of the form | 
|  | 21 | * | 
|  | 22 | *      mmmmmmmmmmmmmmmmppppppppeeeeeeee | 
|  | 23 | * | 
|  | 24 | *  with | 
|  | 25 | * | 
|  | 26 | *      mmmmmmmmmmmmmmmm	16-bit Manufacturer ID (assigned by CBM (sigh)) | 
|  | 27 | *      pppppppp		8-bit Product ID (assigned by manufacturer) | 
|  | 28 | *      eeeeeeee		8-bit Extended Product ID (currently only used | 
|  | 29 | *				for some GVP boards) | 
|  | 30 | */ | 
|  | 31 |  | 
|  | 32 |  | 
|  | 33 | #define ZORRO_MANUF(id)		((id) >> 16) | 
|  | 34 | #define ZORRO_PROD(id)		(((id) >> 8) & 0xff) | 
|  | 35 | #define ZORRO_EPC(id)		((id) & 0xff) | 
|  | 36 |  | 
|  | 37 | #define ZORRO_ID(manuf, prod, epc) \ | 
|  | 38 | ((ZORRO_MANUF_##manuf << 16) | ((prod) << 8) | (epc)) | 
|  | 39 |  | 
|  | 40 | typedef __u32 zorro_id; | 
|  | 41 |  | 
|  | 42 |  | 
|  | 43 | #define ZORRO_WILDCARD		(0xffffffff)	/* not official */ | 
|  | 44 |  | 
|  | 45 | /* Include the ID list */ | 
|  | 46 | #include <linux/zorro_ids.h> | 
|  | 47 |  | 
|  | 48 |  | 
|  | 49 | /* | 
|  | 50 | *  GVP identifies most of its products through the 'extended product code' | 
|  | 51 | *  (epc). The epc has to be ANDed with the GVP_PRODMASK before the | 
|  | 52 | *  identification. | 
|  | 53 | */ | 
|  | 54 |  | 
|  | 55 | #define GVP_PRODMASK			(0xf8) | 
|  | 56 | #define GVP_SCSICLKMASK			(0x01) | 
|  | 57 |  | 
|  | 58 | enum GVP_flags { | 
|  | 59 | GVP_IO		= 0x01, | 
|  | 60 | GVP_ACCEL		= 0x02, | 
|  | 61 | GVP_SCSI		= 0x04, | 
|  | 62 | GVP_24BITDMA	= 0x08, | 
|  | 63 | GVP_25BITDMA	= 0x10, | 
|  | 64 | GVP_NOBANK		= 0x20, | 
|  | 65 | GVP_14MHZ		= 0x40, | 
|  | 66 | }; | 
|  | 67 |  | 
|  | 68 |  | 
|  | 69 | struct Node { | 
|  | 70 | struct  Node *ln_Succ;	/* Pointer to next (successor) */ | 
|  | 71 | struct  Node *ln_Pred;	/* Pointer to previous (predecessor) */ | 
|  | 72 | __u8    ln_Type; | 
|  | 73 | __s8    ln_Pri;		/* Priority, for sorting */ | 
|  | 74 | __s8    *ln_Name;		/* ID string, null terminated */ | 
|  | 75 | } __attribute__ ((packed)); | 
|  | 76 |  | 
|  | 77 | struct ExpansionRom { | 
|  | 78 | /* -First 16 bytes of the expansion ROM */ | 
|  | 79 | __u8  er_Type;		/* Board type, size and flags */ | 
|  | 80 | __u8  er_Product;		/* Product number, assigned by manufacturer */ | 
|  | 81 | __u8  er_Flags;		/* Flags */ | 
|  | 82 | __u8  er_Reserved03;	/* Must be zero ($ff inverted) */ | 
|  | 83 | __u16 er_Manufacturer;	/* Unique ID, ASSIGNED BY COMMODORE-AMIGA! */ | 
|  | 84 | __u32 er_SerialNumber;	/* Available for use by manufacturer */ | 
|  | 85 | __u16 er_InitDiagVec;	/* Offset to optional "DiagArea" structure */ | 
|  | 86 | __u8  er_Reserved0c; | 
|  | 87 | __u8  er_Reserved0d; | 
|  | 88 | __u8  er_Reserved0e; | 
|  | 89 | __u8  er_Reserved0f; | 
|  | 90 | } __attribute__ ((packed)); | 
|  | 91 |  | 
|  | 92 | /* er_Type board type bits */ | 
|  | 93 | #define ERT_TYPEMASK	0xc0 | 
|  | 94 | #define ERT_ZORROII	0xc0 | 
|  | 95 | #define ERT_ZORROIII	0x80 | 
|  | 96 |  | 
|  | 97 | /* other bits defined in er_Type */ | 
|  | 98 | #define ERTB_MEMLIST	5		/* Link RAM into free memory list */ | 
|  | 99 | #define ERTF_MEMLIST	(1<<5) | 
|  | 100 |  | 
|  | 101 | struct ConfigDev { | 
|  | 102 | struct Node		cd_Node; | 
|  | 103 | __u8		cd_Flags;	/* (read/write) */ | 
|  | 104 | __u8		cd_Pad;		/* reserved */ | 
|  | 105 | struct ExpansionRom cd_Rom;		/* copy of board's expansion ROM */ | 
|  | 106 | void		*cd_BoardAddr;	/* where in memory the board was placed */ | 
|  | 107 | __u32		cd_BoardSize;	/* size of board in bytes */ | 
|  | 108 | __u16		cd_SlotAddr;	/* which slot number (PRIVATE) */ | 
|  | 109 | __u16		cd_SlotSize;	/* number of slots (PRIVATE) */ | 
|  | 110 | void		*cd_Driver;	/* pointer to node of driver */ | 
|  | 111 | struct ConfigDev	*cd_NextCD;	/* linked list of drivers to config */ | 
|  | 112 | __u32		cd_Unused[4];	/* for whatever the driver wants */ | 
|  | 113 | } __attribute__ ((packed)); | 
|  | 114 |  | 
|  | 115 | #else /* __ASSEMBLY__ */ | 
|  | 116 |  | 
|  | 117 | LN_Succ		= 0 | 
|  | 118 | LN_Pred		= LN_Succ+4 | 
|  | 119 | LN_Type		= LN_Pred+4 | 
|  | 120 | LN_Pri		= LN_Type+1 | 
|  | 121 | LN_Name		= LN_Pri+1 | 
|  | 122 | LN_sizeof	= LN_Name+4 | 
|  | 123 |  | 
|  | 124 | ER_Type		= 0 | 
|  | 125 | ER_Product	= ER_Type+1 | 
|  | 126 | ER_Flags	= ER_Product+1 | 
|  | 127 | ER_Reserved03	= ER_Flags+1 | 
|  | 128 | ER_Manufacturer	= ER_Reserved03+1 | 
|  | 129 | ER_SerialNumber	= ER_Manufacturer+2 | 
|  | 130 | ER_InitDiagVec	= ER_SerialNumber+4 | 
|  | 131 | ER_Reserved0c	= ER_InitDiagVec+2 | 
|  | 132 | ER_Reserved0d	= ER_Reserved0c+1 | 
|  | 133 | ER_Reserved0e	= ER_Reserved0d+1 | 
|  | 134 | ER_Reserved0f	= ER_Reserved0e+1 | 
|  | 135 | ER_sizeof	= ER_Reserved0f+1 | 
|  | 136 |  | 
|  | 137 | CD_Node		= 0 | 
|  | 138 | CD_Flags	= CD_Node+LN_sizeof | 
|  | 139 | CD_Pad		= CD_Flags+1 | 
|  | 140 | CD_Rom		= CD_Pad+1 | 
|  | 141 | CD_BoardAddr	= CD_Rom+ER_sizeof | 
|  | 142 | CD_BoardSize	= CD_BoardAddr+4 | 
|  | 143 | CD_SlotAddr	= CD_BoardSize+4 | 
|  | 144 | CD_SlotSize	= CD_SlotAddr+2 | 
|  | 145 | CD_Driver	= CD_SlotSize+2 | 
|  | 146 | CD_NextCD	= CD_Driver+4 | 
|  | 147 | CD_Unused	= CD_NextCD+4 | 
|  | 148 | CD_sizeof	= CD_Unused+(4*4) | 
|  | 149 |  | 
|  | 150 | #endif /* __ASSEMBLY__ */ | 
|  | 151 |  | 
|  | 152 | #ifndef __ASSEMBLY__ | 
|  | 153 |  | 
|  | 154 | #define ZORRO_NUM_AUTO		16 | 
|  | 155 |  | 
|  | 156 | #ifdef __KERNEL__ | 
|  | 157 |  | 
|  | 158 | #include <linux/init.h> | 
|  | 159 | #include <linux/ioport.h> | 
|  | 160 |  | 
|  | 161 | #include <asm/zorro.h> | 
|  | 162 |  | 
|  | 163 |  | 
|  | 164 | /* | 
|  | 165 | *  Zorro devices | 
|  | 166 | */ | 
|  | 167 |  | 
|  | 168 | struct zorro_dev { | 
|  | 169 | struct ExpansionRom rom; | 
|  | 170 | zorro_id id; | 
|  | 171 | struct zorro_driver *driver;	/* which driver has allocated this device */ | 
|  | 172 | struct device dev;			/* Generic device interface */ | 
|  | 173 | u16 slotaddr; | 
|  | 174 | u16 slotsize; | 
|  | 175 | char name[64]; | 
|  | 176 | struct resource resource; | 
|  | 177 | }; | 
|  | 178 |  | 
|  | 179 | #define	to_zorro_dev(n)	container_of(n, struct zorro_dev, dev) | 
|  | 180 |  | 
|  | 181 |  | 
|  | 182 | /* | 
|  | 183 | *  Zorro bus | 
|  | 184 | */ | 
|  | 185 |  | 
|  | 186 | struct zorro_bus { | 
|  | 187 | struct list_head devices;		/* list of devices on this bus */ | 
|  | 188 | unsigned int num_resources;		/* number of resources */ | 
|  | 189 | struct resource resources[4];	/* address space routed to this bus */ | 
|  | 190 | struct device dev; | 
|  | 191 | char name[10]; | 
|  | 192 | }; | 
|  | 193 |  | 
|  | 194 | extern struct zorro_bus zorro_bus;	/* single Zorro bus */ | 
|  | 195 | extern struct bus_type zorro_bus_type; | 
|  | 196 |  | 
|  | 197 |  | 
|  | 198 | /* | 
|  | 199 | *  Zorro device IDs | 
|  | 200 | */ | 
|  | 201 |  | 
|  | 202 | struct zorro_device_id { | 
|  | 203 | zorro_id id;			/* Device ID or ZORRO_WILDCARD */ | 
|  | 204 | unsigned long driver_data;	/* Data private to the driver */ | 
|  | 205 | }; | 
|  | 206 |  | 
|  | 207 |  | 
|  | 208 | /* | 
|  | 209 | *  Zorro device drivers | 
|  | 210 | */ | 
|  | 211 |  | 
|  | 212 | struct zorro_driver { | 
|  | 213 | struct list_head node; | 
|  | 214 | char *name; | 
|  | 215 | const struct zorro_device_id *id_table;	/* NULL if wants all devices */ | 
|  | 216 | int (*probe)(struct zorro_dev *z, const struct zorro_device_id *id);	/* New device inserted */ | 
|  | 217 | void (*remove)(struct zorro_dev *z);	/* Device removed (NULL if not a hot-plug capable driver) */ | 
|  | 218 | struct device_driver driver; | 
|  | 219 | }; | 
|  | 220 |  | 
|  | 221 | #define	to_zorro_driver(drv)	container_of(drv, struct zorro_driver, driver) | 
|  | 222 |  | 
|  | 223 |  | 
|  | 224 | #define zorro_for_each_dev(dev)	\ | 
|  | 225 | for (dev = &zorro_autocon[0]; dev < zorro_autocon+zorro_num_autocon; dev++) | 
|  | 226 |  | 
|  | 227 |  | 
|  | 228 | /* New-style probing */ | 
|  | 229 | extern int zorro_register_driver(struct zorro_driver *); | 
|  | 230 | extern void zorro_unregister_driver(struct zorro_driver *); | 
|  | 231 | extern const struct zorro_device_id *zorro_match_device(const struct zorro_device_id *ids, const struct zorro_dev *z); | 
|  | 232 | static inline struct zorro_driver *zorro_dev_driver(const struct zorro_dev *z) | 
|  | 233 | { | 
|  | 234 | return z->driver; | 
|  | 235 | } | 
|  | 236 |  | 
|  | 237 |  | 
|  | 238 | extern unsigned int zorro_num_autocon;	/* # of autoconfig devices found */ | 
|  | 239 | extern struct zorro_dev zorro_autocon[ZORRO_NUM_AUTO]; | 
|  | 240 |  | 
|  | 241 |  | 
|  | 242 | /* | 
|  | 243 | *  Zorro Functions | 
|  | 244 | */ | 
|  | 245 |  | 
|  | 246 | extern struct zorro_dev *zorro_find_device(zorro_id id, | 
|  | 247 | struct zorro_dev *from); | 
|  | 248 |  | 
|  | 249 | #define zorro_resource_start(z)	((z)->resource.start) | 
|  | 250 | #define zorro_resource_end(z)	((z)->resource.end) | 
|  | 251 | #define zorro_resource_len(z)	((z)->resource.end-(z)->resource.start+1) | 
|  | 252 | #define zorro_resource_flags(z)	((z)->resource.flags) | 
|  | 253 |  | 
|  | 254 | #define zorro_request_device(z, name) \ | 
|  | 255 | request_mem_region(zorro_resource_start(z), zorro_resource_len(z), name) | 
|  | 256 | #define zorro_release_device(z) \ | 
|  | 257 | release_mem_region(zorro_resource_start(z), zorro_resource_len(z)) | 
|  | 258 |  | 
|  | 259 | /* Similar to the helpers above, these manipulate per-zorro_dev | 
|  | 260 | * driver-specific data.  They are really just a wrapper around | 
|  | 261 | * the generic device structure functions of these calls. | 
|  | 262 | */ | 
|  | 263 | static inline void *zorro_get_drvdata (struct zorro_dev *z) | 
|  | 264 | { | 
|  | 265 | return dev_get_drvdata(&z->dev); | 
|  | 266 | } | 
|  | 267 |  | 
|  | 268 | static inline void zorro_set_drvdata (struct zorro_dev *z, void *data) | 
|  | 269 | { | 
|  | 270 | dev_set_drvdata(&z->dev, data); | 
|  | 271 | } | 
|  | 272 |  | 
|  | 273 |  | 
|  | 274 | /* | 
|  | 275 | * A helper function which helps ensure correct zorro_driver | 
|  | 276 | * setup and cleanup for commonly-encountered hotplug/modular cases | 
|  | 277 | * | 
|  | 278 | * This MUST stay in a header, as it checks for -DMODULE | 
|  | 279 | */ | 
|  | 280 | static inline int zorro_module_init(struct zorro_driver *drv) | 
|  | 281 | { | 
|  | 282 | int rc = zorro_register_driver(drv); | 
|  | 283 |  | 
|  | 284 | if (rc > 0) | 
|  | 285 | return 0; | 
|  | 286 |  | 
|  | 287 | /* iff CONFIG_HOTPLUG and built into kernel, we should | 
|  | 288 | * leave the driver around for future hotplug events. | 
|  | 289 | * For the module case, a hotplug daemon of some sort | 
|  | 290 | * should load a module in response to an insert event. */ | 
|  | 291 | #if defined(CONFIG_HOTPLUG) && !defined(MODULE) | 
|  | 292 | if (rc == 0) | 
|  | 293 | return 0; | 
|  | 294 | #else | 
|  | 295 | if (rc == 0) | 
|  | 296 | rc = -ENODEV; | 
|  | 297 | #endif | 
|  | 298 |  | 
|  | 299 | /* if we get here, we need to clean up Zorro driver instance | 
|  | 300 | * and return some sort of error */ | 
|  | 301 | zorro_unregister_driver(drv); | 
|  | 302 |  | 
|  | 303 | return rc; | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 |  | 
|  | 307 | /* | 
|  | 308 | *  Bitmask indicating portions of available Zorro II RAM that are unused | 
|  | 309 | *  by the system. Every bit represents a 64K chunk, for a maximum of 8MB | 
|  | 310 | *  (128 chunks, physical 0x00200000-0x009fffff). | 
|  | 311 | * | 
|  | 312 | *  If you want to use (= allocate) portions of this RAM, you should clear | 
|  | 313 | *  the corresponding bits. | 
|  | 314 | */ | 
|  | 315 |  | 
|  | 316 | extern DECLARE_BITMAP(zorro_unused_z2ram, 128); | 
|  | 317 |  | 
|  | 318 | #define Z2RAM_START		(0x00200000) | 
|  | 319 | #define Z2RAM_END		(0x00a00000) | 
|  | 320 | #define Z2RAM_SIZE		(0x00800000) | 
|  | 321 | #define Z2RAM_CHUNKSIZE		(0x00010000) | 
|  | 322 | #define Z2RAM_CHUNKMASK		(0x0000ffff) | 
|  | 323 | #define Z2RAM_CHUNKSHIFT	(16) | 
|  | 324 |  | 
|  | 325 |  | 
|  | 326 | #endif /* !__ASSEMBLY__ */ | 
|  | 327 | #endif /* __KERNEL__ */ | 
|  | 328 |  | 
|  | 329 | #endif /* _LINUX_ZORRO_H */ |