| Mian Yousaf Kaukab | 9691523 | 2010-12-07 15:00:09 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * drivers/usb/otg/ab8500_usb.c | 
|  | 3 | * | 
|  | 4 | * USB transceiver driver for AB8500 chip | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 2010 ST-Ericsson AB | 
|  | 7 | * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> | 
|  | 8 | * | 
|  | 9 | * This program is free software; you can redistribute it and/or modify | 
|  | 10 | * it under the terms of the GNU General Public License as published by | 
|  | 11 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 12 | * (at your option) any later version. | 
|  | 13 | * | 
|  | 14 | * This program is distributed in the hope that it will be useful, | 
|  | 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 17 | * GNU General Public License for more details. | 
|  | 18 | * | 
|  | 19 | * You should have received a copy of the GNU General Public License | 
|  | 20 | * along with this program; if not, write to the Free Software | 
|  | 21 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | 22 | * | 
|  | 23 | */ | 
|  | 24 |  | 
|  | 25 | #include <linux/module.h> | 
|  | 26 | #include <linux/platform_device.h> | 
|  | 27 | #include <linux/usb/otg.h> | 
|  | 28 | #include <linux/slab.h> | 
|  | 29 | #include <linux/notifier.h> | 
|  | 30 | #include <linux/interrupt.h> | 
|  | 31 | #include <linux/delay.h> | 
|  | 32 | #include <linux/mfd/abx500.h> | 
|  | 33 | #include <linux/mfd/ab8500.h> | 
|  | 34 |  | 
|  | 35 | #define AB8500_MAIN_WD_CTRL_REG 0x01 | 
|  | 36 | #define AB8500_USB_LINE_STAT_REG 0x80 | 
|  | 37 | #define AB8500_USB_PHY_CTRL_REG 0x8A | 
|  | 38 |  | 
|  | 39 | #define AB8500_BIT_OTG_STAT_ID (1 << 0) | 
|  | 40 | #define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) | 
|  | 41 | #define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) | 
|  | 42 | #define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) | 
|  | 43 | #define AB8500_BIT_WD_CTRL_KICK (1 << 1) | 
|  | 44 |  | 
|  | 45 | #define AB8500_V1x_LINK_STAT_WAIT (HZ/10) | 
|  | 46 | #define AB8500_WD_KICK_DELAY_US 100 /* usec */ | 
|  | 47 | #define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ | 
|  | 48 | #define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ | 
|  | 49 |  | 
|  | 50 | /* Usb line status register */ | 
|  | 51 | enum ab8500_usb_link_status { | 
|  | 52 | USB_LINK_NOT_CONFIGURED = 0, | 
|  | 53 | USB_LINK_STD_HOST_NC, | 
|  | 54 | USB_LINK_STD_HOST_C_NS, | 
|  | 55 | USB_LINK_STD_HOST_C_S, | 
|  | 56 | USB_LINK_HOST_CHG_NM, | 
|  | 57 | USB_LINK_HOST_CHG_HS, | 
|  | 58 | USB_LINK_HOST_CHG_HS_CHIRP, | 
|  | 59 | USB_LINK_DEDICATED_CHG, | 
|  | 60 | USB_LINK_ACA_RID_A, | 
|  | 61 | USB_LINK_ACA_RID_B, | 
|  | 62 | USB_LINK_ACA_RID_C_NM, | 
|  | 63 | USB_LINK_ACA_RID_C_HS, | 
|  | 64 | USB_LINK_ACA_RID_C_HS_CHIRP, | 
|  | 65 | USB_LINK_HM_IDGND, | 
|  | 66 | USB_LINK_RESERVED, | 
|  | 67 | USB_LINK_NOT_VALID_LINK | 
|  | 68 | }; | 
|  | 69 |  | 
|  | 70 | struct ab8500_usb { | 
|  | 71 | struct otg_transceiver otg; | 
|  | 72 | struct device *dev; | 
|  | 73 | int irq_num_id_rise; | 
|  | 74 | int irq_num_id_fall; | 
|  | 75 | int irq_num_vbus_rise; | 
|  | 76 | int irq_num_vbus_fall; | 
|  | 77 | int irq_num_link_status; | 
|  | 78 | unsigned vbus_draw; | 
|  | 79 | struct delayed_work dwork; | 
|  | 80 | struct work_struct phy_dis_work; | 
|  | 81 | unsigned long link_status_wait; | 
|  | 82 | int rev; | 
|  | 83 | }; | 
|  | 84 |  | 
|  | 85 | static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x) | 
|  | 86 | { | 
|  | 87 | return container_of(x, struct ab8500_usb, otg); | 
|  | 88 | } | 
|  | 89 |  | 
|  | 90 | static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) | 
|  | 91 | { | 
|  | 92 | abx500_set_register_interruptible(ab->dev, | 
|  | 93 | AB8500_SYS_CTRL2_BLOCK, | 
|  | 94 | AB8500_MAIN_WD_CTRL_REG, | 
|  | 95 | AB8500_BIT_WD_CTRL_ENABLE); | 
|  | 96 |  | 
|  | 97 | udelay(AB8500_WD_KICK_DELAY_US); | 
|  | 98 |  | 
|  | 99 | abx500_set_register_interruptible(ab->dev, | 
|  | 100 | AB8500_SYS_CTRL2_BLOCK, | 
|  | 101 | AB8500_MAIN_WD_CTRL_REG, | 
|  | 102 | (AB8500_BIT_WD_CTRL_ENABLE | 
|  | 103 | | AB8500_BIT_WD_CTRL_KICK)); | 
|  | 104 |  | 
|  | 105 | if (ab->rev > 0x10) /* v1.1 v2.0 */ | 
|  | 106 | udelay(AB8500_WD_V11_DISABLE_DELAY_US); | 
|  | 107 | else /* v1.0 */ | 
|  | 108 | msleep(AB8500_WD_V10_DISABLE_DELAY_MS); | 
|  | 109 |  | 
|  | 110 | abx500_set_register_interruptible(ab->dev, | 
|  | 111 | AB8500_SYS_CTRL2_BLOCK, | 
|  | 112 | AB8500_MAIN_WD_CTRL_REG, | 
|  | 113 | 0); | 
|  | 114 | } | 
|  | 115 |  | 
|  | 116 | static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, | 
|  | 117 | bool enable) | 
|  | 118 | { | 
|  | 119 | u8 ctrl_reg; | 
|  | 120 | abx500_get_register_interruptible(ab->dev, | 
|  | 121 | AB8500_USB, | 
|  | 122 | AB8500_USB_PHY_CTRL_REG, | 
|  | 123 | &ctrl_reg); | 
|  | 124 | if (sel_host) { | 
|  | 125 | if (enable) | 
|  | 126 | ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; | 
|  | 127 | else | 
|  | 128 | ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; | 
|  | 129 | } else { | 
|  | 130 | if (enable) | 
|  | 131 | ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; | 
|  | 132 | else | 
|  | 133 | ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; | 
|  | 134 | } | 
|  | 135 |  | 
|  | 136 | abx500_set_register_interruptible(ab->dev, | 
|  | 137 | AB8500_USB, | 
|  | 138 | AB8500_USB_PHY_CTRL_REG, | 
|  | 139 | ctrl_reg); | 
|  | 140 |  | 
|  | 141 | /* Needed to enable the phy.*/ | 
|  | 142 | if (enable) | 
|  | 143 | ab8500_usb_wd_workaround(ab); | 
|  | 144 | } | 
|  | 145 |  | 
|  | 146 | #define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_ctrl(ab, true, true) | 
|  | 147 | #define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, true, false) | 
|  | 148 | #define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_ctrl(ab, false, true) | 
|  | 149 | #define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, false, false) | 
|  | 150 |  | 
|  | 151 | static int ab8500_usb_link_status_update(struct ab8500_usb *ab) | 
|  | 152 | { | 
|  | 153 | u8 reg; | 
|  | 154 | enum ab8500_usb_link_status lsts; | 
|  | 155 | void *v = NULL; | 
|  | 156 | enum usb_xceiv_events event; | 
|  | 157 |  | 
|  | 158 | abx500_get_register_interruptible(ab->dev, | 
|  | 159 | AB8500_USB, | 
|  | 160 | AB8500_USB_LINE_STAT_REG, | 
|  | 161 | ®); | 
|  | 162 |  | 
|  | 163 | lsts = (reg >> 3) & 0x0F; | 
|  | 164 |  | 
|  | 165 | switch (lsts) { | 
|  | 166 | case USB_LINK_NOT_CONFIGURED: | 
|  | 167 | case USB_LINK_RESERVED: | 
|  | 168 | case USB_LINK_NOT_VALID_LINK: | 
|  | 169 | /* TODO: Disable regulators. */ | 
|  | 170 | ab8500_usb_host_phy_dis(ab); | 
|  | 171 | ab8500_usb_peri_phy_dis(ab); | 
|  | 172 | ab->otg.state = OTG_STATE_B_IDLE; | 
|  | 173 | ab->otg.default_a = false; | 
|  | 174 | ab->vbus_draw = 0; | 
|  | 175 | event = USB_EVENT_NONE; | 
|  | 176 | break; | 
|  | 177 |  | 
|  | 178 | case USB_LINK_STD_HOST_NC: | 
|  | 179 | case USB_LINK_STD_HOST_C_NS: | 
|  | 180 | case USB_LINK_STD_HOST_C_S: | 
|  | 181 | case USB_LINK_HOST_CHG_NM: | 
|  | 182 | case USB_LINK_HOST_CHG_HS: | 
|  | 183 | case USB_LINK_HOST_CHG_HS_CHIRP: | 
|  | 184 | if (ab->otg.gadget) { | 
|  | 185 | /* TODO: Enable regulators. */ | 
|  | 186 | ab8500_usb_peri_phy_en(ab); | 
|  | 187 | v = ab->otg.gadget; | 
|  | 188 | } | 
|  | 189 | event = USB_EVENT_VBUS; | 
|  | 190 | break; | 
|  | 191 |  | 
|  | 192 | case USB_LINK_HM_IDGND: | 
|  | 193 | if (ab->otg.host) { | 
|  | 194 | /* TODO: Enable regulators. */ | 
|  | 195 | ab8500_usb_host_phy_en(ab); | 
|  | 196 | v = ab->otg.host; | 
|  | 197 | } | 
|  | 198 | ab->otg.state = OTG_STATE_A_IDLE; | 
|  | 199 | ab->otg.default_a = true; | 
|  | 200 | event = USB_EVENT_ID; | 
|  | 201 | break; | 
|  | 202 |  | 
|  | 203 | case USB_LINK_ACA_RID_A: | 
|  | 204 | case USB_LINK_ACA_RID_B: | 
|  | 205 | /* TODO */ | 
|  | 206 | case USB_LINK_ACA_RID_C_NM: | 
|  | 207 | case USB_LINK_ACA_RID_C_HS: | 
|  | 208 | case USB_LINK_ACA_RID_C_HS_CHIRP: | 
|  | 209 | case USB_LINK_DEDICATED_CHG: | 
|  | 210 | /* TODO: vbus_draw */ | 
|  | 211 | event = USB_EVENT_CHARGER; | 
|  | 212 | break; | 
|  | 213 | } | 
|  | 214 |  | 
|  | 215 | blocking_notifier_call_chain(&ab->otg.notifier, event, v); | 
|  | 216 |  | 
|  | 217 | return 0; | 
|  | 218 | } | 
|  | 219 |  | 
|  | 220 | static void ab8500_usb_delayed_work(struct work_struct *work) | 
|  | 221 | { | 
|  | 222 | struct ab8500_usb *ab = container_of(work, struct ab8500_usb, | 
|  | 223 | dwork.work); | 
|  | 224 |  | 
|  | 225 | ab8500_usb_link_status_update(ab); | 
|  | 226 | } | 
|  | 227 |  | 
|  | 228 | static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) | 
|  | 229 | { | 
|  | 230 | struct ab8500_usb *ab = (struct ab8500_usb *) data; | 
|  | 231 |  | 
|  | 232 | /* Wait for link status to become stable. */ | 
|  | 233 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); | 
|  | 234 |  | 
|  | 235 | return IRQ_HANDLED; | 
|  | 236 | } | 
|  | 237 |  | 
|  | 238 | static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) | 
|  | 239 | { | 
|  | 240 | struct ab8500_usb *ab = (struct ab8500_usb *) data; | 
|  | 241 |  | 
|  | 242 | /* Link status will not be updated till phy is disabled. */ | 
|  | 243 | ab8500_usb_peri_phy_dis(ab); | 
|  | 244 |  | 
|  | 245 | /* Wait for link status to become stable. */ | 
|  | 246 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); | 
|  | 247 |  | 
|  | 248 | return IRQ_HANDLED; | 
|  | 249 | } | 
|  | 250 |  | 
|  | 251 | static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) | 
|  | 252 | { | 
|  | 253 | struct ab8500_usb *ab = (struct ab8500_usb *) data; | 
|  | 254 |  | 
|  | 255 | ab8500_usb_link_status_update(ab); | 
|  | 256 |  | 
|  | 257 | return IRQ_HANDLED; | 
|  | 258 | } | 
|  | 259 |  | 
|  | 260 | static void ab8500_usb_phy_disable_work(struct work_struct *work) | 
|  | 261 | { | 
|  | 262 | struct ab8500_usb *ab = container_of(work, struct ab8500_usb, | 
|  | 263 | phy_dis_work); | 
|  | 264 |  | 
|  | 265 | if (!ab->otg.host) | 
|  | 266 | ab8500_usb_host_phy_dis(ab); | 
|  | 267 |  | 
|  | 268 | if (!ab->otg.gadget) | 
|  | 269 | ab8500_usb_peri_phy_dis(ab); | 
|  | 270 | } | 
|  | 271 |  | 
|  | 272 | static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA) | 
|  | 273 | { | 
|  | 274 | struct ab8500_usb *ab; | 
|  | 275 |  | 
|  | 276 | if (!otg) | 
|  | 277 | return -ENODEV; | 
|  | 278 |  | 
|  | 279 | ab = xceiv_to_ab(otg); | 
|  | 280 |  | 
|  | 281 | ab->vbus_draw = mA; | 
|  | 282 |  | 
|  | 283 | if (mA) | 
|  | 284 | blocking_notifier_call_chain(&ab->otg.notifier, | 
|  | 285 | USB_EVENT_ENUMERATED, ab->otg.gadget); | 
|  | 286 | return 0; | 
|  | 287 | } | 
|  | 288 |  | 
|  | 289 | /* TODO: Implement some way for charging or other drivers to read | 
|  | 290 | * ab->vbus_draw. | 
|  | 291 | */ | 
|  | 292 |  | 
|  | 293 | static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend) | 
|  | 294 | { | 
|  | 295 | /* TODO */ | 
|  | 296 | return 0; | 
|  | 297 | } | 
|  | 298 |  | 
|  | 299 | static int ab8500_usb_set_peripheral(struct otg_transceiver *otg, | 
|  | 300 | struct usb_gadget *gadget) | 
|  | 301 | { | 
|  | 302 | struct ab8500_usb *ab; | 
|  | 303 |  | 
|  | 304 | if (!otg) | 
|  | 305 | return -ENODEV; | 
|  | 306 |  | 
|  | 307 | ab = xceiv_to_ab(otg); | 
|  | 308 |  | 
|  | 309 | /* Some drivers call this function in atomic context. | 
|  | 310 | * Do not update ab8500 registers directly till this | 
|  | 311 | * is fixed. | 
|  | 312 | */ | 
|  | 313 |  | 
|  | 314 | if (!gadget) { | 
|  | 315 | /* TODO: Disable regulators. */ | 
|  | 316 | ab->otg.gadget = NULL; | 
|  | 317 | schedule_work(&ab->phy_dis_work); | 
|  | 318 | } else { | 
|  | 319 | ab->otg.gadget = gadget; | 
|  | 320 | ab->otg.state = OTG_STATE_B_IDLE; | 
|  | 321 |  | 
|  | 322 | /* Phy will not be enabled if cable is already | 
|  | 323 | * plugged-in. Schedule to enable phy. | 
|  | 324 | * Use same delay to avoid any race condition. | 
|  | 325 | */ | 
|  | 326 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); | 
|  | 327 | } | 
|  | 328 |  | 
|  | 329 | return 0; | 
|  | 330 | } | 
|  | 331 |  | 
|  | 332 | static int ab8500_usb_set_host(struct otg_transceiver *otg, | 
|  | 333 | struct usb_bus *host) | 
|  | 334 | { | 
|  | 335 | struct ab8500_usb *ab; | 
|  | 336 |  | 
|  | 337 | if (!otg) | 
|  | 338 | return -ENODEV; | 
|  | 339 |  | 
|  | 340 | ab = xceiv_to_ab(otg); | 
|  | 341 |  | 
|  | 342 | /* Some drivers call this function in atomic context. | 
|  | 343 | * Do not update ab8500 registers directly till this | 
|  | 344 | * is fixed. | 
|  | 345 | */ | 
|  | 346 |  | 
|  | 347 | if (!host) { | 
|  | 348 | /* TODO: Disable regulators. */ | 
|  | 349 | ab->otg.host = NULL; | 
|  | 350 | schedule_work(&ab->phy_dis_work); | 
|  | 351 | } else { | 
|  | 352 | ab->otg.host = host; | 
|  | 353 | /* Phy will not be enabled if cable is already | 
|  | 354 | * plugged-in. Schedule to enable phy. | 
|  | 355 | * Use same delay to avoid any race condition. | 
|  | 356 | */ | 
|  | 357 | schedule_delayed_work(&ab->dwork, ab->link_status_wait); | 
|  | 358 | } | 
|  | 359 |  | 
|  | 360 | return 0; | 
|  | 361 | } | 
|  | 362 |  | 
|  | 363 | static void ab8500_usb_irq_free(struct ab8500_usb *ab) | 
|  | 364 | { | 
|  | 365 | if (ab->rev < 0x20) { | 
|  | 366 | free_irq(ab->irq_num_id_rise, ab); | 
|  | 367 | free_irq(ab->irq_num_id_fall, ab); | 
|  | 368 | free_irq(ab->irq_num_vbus_rise, ab); | 
|  | 369 | free_irq(ab->irq_num_vbus_fall, ab); | 
|  | 370 | } else { | 
|  | 371 | free_irq(ab->irq_num_link_status, ab); | 
|  | 372 | } | 
|  | 373 | } | 
|  | 374 |  | 
|  | 375 | static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, | 
|  | 376 | struct ab8500_usb *ab) | 
|  | 377 | { | 
|  | 378 | int err; | 
|  | 379 |  | 
|  | 380 | ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); | 
|  | 381 | if (ab->irq_num_id_rise < 0) { | 
|  | 382 | dev_err(&pdev->dev, "ID rise irq not found\n"); | 
|  | 383 | return ab->irq_num_id_rise; | 
|  | 384 | } | 
|  | 385 | err = request_threaded_irq(ab->irq_num_id_rise, NULL, | 
|  | 386 | ab8500_usb_v1x_common_irq, | 
|  | 387 | IRQF_NO_SUSPEND | IRQF_SHARED, | 
|  | 388 | "usb-id-rise", ab); | 
|  | 389 | if (err < 0) { | 
|  | 390 | dev_err(ab->dev, "request_irq failed for ID rise irq\n"); | 
|  | 391 | goto fail0; | 
|  | 392 | } | 
|  | 393 |  | 
|  | 394 | ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); | 
|  | 395 | if (ab->irq_num_id_fall < 0) { | 
|  | 396 | dev_err(&pdev->dev, "ID fall irq not found\n"); | 
|  | 397 | return ab->irq_num_id_fall; | 
|  | 398 | } | 
|  | 399 | err = request_threaded_irq(ab->irq_num_id_fall, NULL, | 
|  | 400 | ab8500_usb_v1x_common_irq, | 
|  | 401 | IRQF_NO_SUSPEND | IRQF_SHARED, | 
|  | 402 | "usb-id-fall", ab); | 
|  | 403 | if (err < 0) { | 
|  | 404 | dev_err(ab->dev, "request_irq failed for ID fall irq\n"); | 
|  | 405 | goto fail1; | 
|  | 406 | } | 
|  | 407 |  | 
|  | 408 | ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); | 
|  | 409 | if (ab->irq_num_vbus_rise < 0) { | 
|  | 410 | dev_err(&pdev->dev, "VBUS rise irq not found\n"); | 
|  | 411 | return ab->irq_num_vbus_rise; | 
|  | 412 | } | 
|  | 413 | err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, | 
|  | 414 | ab8500_usb_v1x_common_irq, | 
|  | 415 | IRQF_NO_SUSPEND | IRQF_SHARED, | 
|  | 416 | "usb-vbus-rise", ab); | 
|  | 417 | if (err < 0) { | 
|  | 418 | dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); | 
|  | 419 | goto fail2; | 
|  | 420 | } | 
|  | 421 |  | 
|  | 422 | ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); | 
|  | 423 | if (ab->irq_num_vbus_fall < 0) { | 
|  | 424 | dev_err(&pdev->dev, "VBUS fall irq not found\n"); | 
|  | 425 | return ab->irq_num_vbus_fall; | 
|  | 426 | } | 
|  | 427 | err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, | 
|  | 428 | ab8500_usb_v1x_vbus_fall_irq, | 
|  | 429 | IRQF_NO_SUSPEND | IRQF_SHARED, | 
|  | 430 | "usb-vbus-fall", ab); | 
|  | 431 | if (err < 0) { | 
|  | 432 | dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); | 
|  | 433 | goto fail3; | 
|  | 434 | } | 
|  | 435 |  | 
|  | 436 | return 0; | 
|  | 437 | fail3: | 
|  | 438 | free_irq(ab->irq_num_vbus_rise, ab); | 
|  | 439 | fail2: | 
|  | 440 | free_irq(ab->irq_num_id_fall, ab); | 
|  | 441 | fail1: | 
|  | 442 | free_irq(ab->irq_num_id_rise, ab); | 
|  | 443 | fail0: | 
|  | 444 | return err; | 
|  | 445 | } | 
|  | 446 |  | 
|  | 447 | static int ab8500_usb_v2_res_setup(struct platform_device *pdev, | 
|  | 448 | struct ab8500_usb *ab) | 
|  | 449 | { | 
|  | 450 | int err; | 
|  | 451 |  | 
|  | 452 | ab->irq_num_link_status = platform_get_irq_byname(pdev, | 
|  | 453 | "USB_LINK_STATUS"); | 
|  | 454 | if (ab->irq_num_link_status < 0) { | 
|  | 455 | dev_err(&pdev->dev, "Link status irq not found\n"); | 
|  | 456 | return ab->irq_num_link_status; | 
|  | 457 | } | 
|  | 458 |  | 
|  | 459 | err = request_threaded_irq(ab->irq_num_link_status, NULL, | 
|  | 460 | ab8500_usb_v20_irq, | 
|  | 461 | IRQF_NO_SUSPEND | IRQF_SHARED, | 
|  | 462 | "usb-link-status", ab); | 
|  | 463 | if (err < 0) { | 
|  | 464 | dev_err(ab->dev, | 
|  | 465 | "request_irq failed for link status irq\n"); | 
|  | 466 | return err; | 
|  | 467 | } | 
|  | 468 |  | 
|  | 469 | return 0; | 
|  | 470 | } | 
|  | 471 |  | 
|  | 472 | static int __devinit ab8500_usb_probe(struct platform_device *pdev) | 
|  | 473 | { | 
|  | 474 | struct ab8500_usb	*ab; | 
|  | 475 | int err; | 
|  | 476 | int rev; | 
|  | 477 |  | 
|  | 478 | rev = abx500_get_chip_id(&pdev->dev); | 
|  | 479 | if (rev < 0) { | 
|  | 480 | dev_err(&pdev->dev, "Chip id read failed\n"); | 
|  | 481 | return rev; | 
|  | 482 | } else if (rev < 0x10) { | 
|  | 483 | dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); | 
|  | 484 | return -ENODEV; | 
|  | 485 | } | 
|  | 486 |  | 
|  | 487 | ab = kzalloc(sizeof *ab, GFP_KERNEL); | 
|  | 488 | if (!ab) | 
|  | 489 | return -ENOMEM; | 
|  | 490 |  | 
|  | 491 | ab->dev			= &pdev->dev; | 
|  | 492 | ab->rev			= rev; | 
|  | 493 | ab->otg.dev		= ab->dev; | 
|  | 494 | ab->otg.label		= "ab8500"; | 
|  | 495 | ab->otg.state		= OTG_STATE_UNDEFINED; | 
|  | 496 | ab->otg.set_host	= ab8500_usb_set_host; | 
|  | 497 | ab->otg.set_peripheral	= ab8500_usb_set_peripheral; | 
|  | 498 | ab->otg.set_suspend	= ab8500_usb_set_suspend; | 
|  | 499 | ab->otg.set_power	= ab8500_usb_set_power; | 
|  | 500 |  | 
|  | 501 | platform_set_drvdata(pdev, ab); | 
|  | 502 |  | 
|  | 503 | BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier); | 
|  | 504 |  | 
|  | 505 | /* v1: Wait for link status to become stable. | 
|  | 506 | * all: Updates form set_host and set_peripheral as they are atomic. | 
|  | 507 | */ | 
|  | 508 | INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); | 
|  | 509 |  | 
|  | 510 | /* all: Disable phy when called from set_host and set_peripheral */ | 
|  | 511 | INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); | 
|  | 512 |  | 
|  | 513 | if (ab->rev < 0x20) { | 
|  | 514 | err = ab8500_usb_v1x_res_setup(pdev, ab); | 
|  | 515 | ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; | 
|  | 516 | } else { | 
|  | 517 | err = ab8500_usb_v2_res_setup(pdev, ab); | 
|  | 518 | } | 
|  | 519 |  | 
|  | 520 | if (err < 0) | 
|  | 521 | goto fail0; | 
|  | 522 |  | 
|  | 523 | err = otg_set_transceiver(&ab->otg); | 
|  | 524 | if (err) { | 
|  | 525 | dev_err(&pdev->dev, "Can't register transceiver\n"); | 
|  | 526 | goto fail1; | 
|  | 527 | } | 
|  | 528 |  | 
|  | 529 | dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); | 
|  | 530 |  | 
|  | 531 | return 0; | 
|  | 532 | fail1: | 
|  | 533 | ab8500_usb_irq_free(ab); | 
|  | 534 | fail0: | 
|  | 535 | kfree(ab); | 
|  | 536 | return err; | 
|  | 537 | } | 
|  | 538 |  | 
|  | 539 | static int __devexit ab8500_usb_remove(struct platform_device *pdev) | 
|  | 540 | { | 
|  | 541 | struct ab8500_usb *ab = platform_get_drvdata(pdev); | 
|  | 542 |  | 
|  | 543 | ab8500_usb_irq_free(ab); | 
|  | 544 |  | 
|  | 545 | cancel_delayed_work_sync(&ab->dwork); | 
|  | 546 |  | 
|  | 547 | cancel_work_sync(&ab->phy_dis_work); | 
|  | 548 |  | 
|  | 549 | otg_set_transceiver(NULL); | 
|  | 550 |  | 
|  | 551 | ab8500_usb_host_phy_dis(ab); | 
|  | 552 | ab8500_usb_peri_phy_dis(ab); | 
|  | 553 |  | 
|  | 554 | platform_set_drvdata(pdev, NULL); | 
|  | 555 |  | 
|  | 556 | kfree(ab); | 
|  | 557 |  | 
|  | 558 | return 0; | 
|  | 559 | } | 
|  | 560 |  | 
|  | 561 | static struct platform_driver ab8500_usb_driver = { | 
|  | 562 | .probe		= ab8500_usb_probe, | 
|  | 563 | .remove		= __devexit_p(ab8500_usb_remove), | 
|  | 564 | .driver		= { | 
|  | 565 | .name	= "ab8500-usb", | 
|  | 566 | .owner	= THIS_MODULE, | 
|  | 567 | }, | 
|  | 568 | }; | 
|  | 569 |  | 
|  | 570 | static int __init ab8500_usb_init(void) | 
|  | 571 | { | 
|  | 572 | return platform_driver_register(&ab8500_usb_driver); | 
|  | 573 | } | 
|  | 574 | subsys_initcall(ab8500_usb_init); | 
|  | 575 |  | 
|  | 576 | static void __exit ab8500_usb_exit(void) | 
|  | 577 | { | 
|  | 578 | platform_driver_unregister(&ab8500_usb_driver); | 
|  | 579 | } | 
|  | 580 | module_exit(ab8500_usb_exit); | 
|  | 581 |  | 
|  | 582 | MODULE_ALIAS("platform:ab8500_usb"); | 
|  | 583 | MODULE_AUTHOR("ST-Ericsson AB"); | 
|  | 584 | MODULE_DESCRIPTION("AB8500 usb transceiver driver"); | 
|  | 585 | MODULE_LICENSE("GPL"); |