| Hema HK | c33fad0 | 2010-12-10 17:58:20 +0530 | [diff] [blame] | 1 | /* | 
|  | 2 | * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. | 
|  | 3 | * | 
|  | 4 | * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com | 
|  | 5 | * This program is free software; you can redistribute it and/or modify | 
|  | 6 | * it under the terms of the GNU General Public License as published by | 
|  | 7 | * the Free Software Foundation; either version 2 of the License, or | 
|  | 8 | * (at your option) any later version. | 
|  | 9 | * | 
|  | 10 | * Author: Hema HK <hemahk@ti.com> | 
|  | 11 | * | 
|  | 12 | * This program is distributed in the hope that it will be useful, | 
|  | 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | 15 | * GNU General Public License for more details. | 
|  | 16 | * | 
|  | 17 | * You should have received a copy of the GNU General Public License | 
|  | 18 | * along with this program; if not, write to the Free Software | 
|  | 19 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | 20 | * | 
|  | 21 | */ | 
|  | 22 |  | 
|  | 23 | #include <linux/module.h> | 
|  | 24 | #include <linux/init.h> | 
|  | 25 | #include <linux/interrupt.h> | 
|  | 26 | #include <linux/platform_device.h> | 
|  | 27 | #include <linux/io.h> | 
|  | 28 | #include <linux/usb/otg.h> | 
|  | 29 | #include <linux/i2c/twl.h> | 
|  | 30 | #include <linux/regulator/consumer.h> | 
|  | 31 | #include <linux/err.h> | 
|  | 32 | #include <linux/notifier.h> | 
|  | 33 | #include <linux/slab.h> | 
|  | 34 |  | 
|  | 35 | /* usb register definitions */ | 
|  | 36 | #define USB_VENDOR_ID_LSB		0x00 | 
|  | 37 | #define USB_VENDOR_ID_MSB		0x01 | 
|  | 38 | #define USB_PRODUCT_ID_LSB		0x02 | 
|  | 39 | #define USB_PRODUCT_ID_MSB		0x03 | 
|  | 40 | #define USB_VBUS_CTRL_SET		0x04 | 
|  | 41 | #define USB_VBUS_CTRL_CLR		0x05 | 
|  | 42 | #define USB_ID_CTRL_SET			0x06 | 
|  | 43 | #define USB_ID_CTRL_CLR			0x07 | 
|  | 44 | #define USB_VBUS_INT_SRC		0x08 | 
|  | 45 | #define USB_VBUS_INT_LATCH_SET		0x09 | 
|  | 46 | #define USB_VBUS_INT_LATCH_CLR		0x0A | 
|  | 47 | #define USB_VBUS_INT_EN_LO_SET		0x0B | 
|  | 48 | #define USB_VBUS_INT_EN_LO_CLR		0x0C | 
|  | 49 | #define USB_VBUS_INT_EN_HI_SET		0x0D | 
|  | 50 | #define USB_VBUS_INT_EN_HI_CLR		0x0E | 
|  | 51 | #define USB_ID_INT_SRC			0x0F | 
|  | 52 | #define USB_ID_INT_LATCH_SET		0x10 | 
|  | 53 | #define USB_ID_INT_LATCH_CLR		0x11 | 
|  | 54 |  | 
|  | 55 | #define USB_ID_INT_EN_LO_SET		0x12 | 
|  | 56 | #define USB_ID_INT_EN_LO_CLR		0x13 | 
|  | 57 | #define USB_ID_INT_EN_HI_SET		0x14 | 
|  | 58 | #define USB_ID_INT_EN_HI_CLR		0x15 | 
|  | 59 | #define USB_OTG_ADP_CTRL		0x16 | 
|  | 60 | #define USB_OTG_ADP_HIGH		0x17 | 
|  | 61 | #define USB_OTG_ADP_LOW			0x18 | 
|  | 62 | #define USB_OTG_ADP_RISE		0x19 | 
|  | 63 | #define USB_OTG_REVISION		0x1A | 
|  | 64 |  | 
|  | 65 | /* to be moved to LDO */ | 
|  | 66 | #define TWL6030_MISC2			0xE5 | 
|  | 67 | #define TWL6030_CFG_LDO_PD2		0xF5 | 
|  | 68 | #define TWL6030_BACKUP_REG		0xFA | 
|  | 69 |  | 
|  | 70 | #define STS_HW_CONDITIONS		0x21 | 
|  | 71 |  | 
|  | 72 | /* In module TWL6030_MODULE_PM_MASTER */ | 
|  | 73 | #define STS_HW_CONDITIONS		0x21 | 
|  | 74 | #define STS_USB_ID			BIT(2) | 
|  | 75 |  | 
|  | 76 | /* In module TWL6030_MODULE_PM_RECEIVER */ | 
|  | 77 | #define VUSB_CFG_TRANS			0x71 | 
|  | 78 | #define VUSB_CFG_STATE			0x72 | 
|  | 79 | #define VUSB_CFG_VOLTAGE		0x73 | 
|  | 80 |  | 
|  | 81 | /* in module TWL6030_MODULE_MAIN_CHARGE */ | 
|  | 82 |  | 
|  | 83 | #define CHARGERUSB_CTRL1		0x8 | 
|  | 84 |  | 
|  | 85 | #define CONTROLLER_STAT1		0x03 | 
|  | 86 | #define	VBUS_DET			BIT(2) | 
|  | 87 |  | 
|  | 88 | struct twl6030_usb { | 
|  | 89 | struct otg_transceiver	otg; | 
|  | 90 | struct device		*dev; | 
|  | 91 |  | 
|  | 92 | /* for vbus reporting with irqs disabled */ | 
|  | 93 | spinlock_t		lock; | 
|  | 94 |  | 
|  | 95 | struct regulator		*usb3v3; | 
|  | 96 |  | 
|  | 97 | int			irq1; | 
|  | 98 | int			irq2; | 
|  | 99 | u8			linkstat; | 
|  | 100 | u8			asleep; | 
|  | 101 | bool			irq_enabled; | 
|  | 102 | }; | 
|  | 103 |  | 
|  | 104 | #define xceiv_to_twl(x)		container_of((x), struct twl6030_usb, otg); | 
|  | 105 |  | 
|  | 106 | /*-------------------------------------------------------------------------*/ | 
|  | 107 |  | 
|  | 108 | static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, | 
|  | 109 | u8 data, u8 address) | 
|  | 110 | { | 
|  | 111 | int ret = 0; | 
|  | 112 |  | 
|  | 113 | ret = twl_i2c_write_u8(module, data, address); | 
|  | 114 | if (ret < 0) | 
|  | 115 | dev_err(twl->dev, | 
|  | 116 | "Write[0x%x] Error %d\n", address, ret); | 
|  | 117 | return ret; | 
|  | 118 | } | 
|  | 119 |  | 
|  | 120 | static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) | 
|  | 121 | { | 
|  | 122 | u8 data, ret = 0; | 
|  | 123 |  | 
|  | 124 | ret = twl_i2c_read_u8(module, &data, address); | 
|  | 125 | if (ret >= 0) | 
|  | 126 | ret = data; | 
|  | 127 | else | 
|  | 128 | dev_err(twl->dev, | 
|  | 129 | "readb[0x%x,0x%x] Error %d\n", | 
|  | 130 | module, address, ret); | 
|  | 131 | return ret; | 
|  | 132 | } | 
|  | 133 |  | 
|  | 134 | /*-------------------------------------------------------------------------*/ | 
|  | 135 | static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) | 
|  | 136 | { | 
|  | 137 | struct twl6030_usb *twl; | 
|  | 138 | struct device *dev; | 
|  | 139 | struct twl4030_usb_data *pdata; | 
|  | 140 |  | 
|  | 141 | twl = xceiv_to_twl(x); | 
|  | 142 | dev  = twl->dev; | 
|  | 143 | pdata = dev->platform_data; | 
|  | 144 |  | 
|  | 145 | pdata->phy_set_clock(twl->dev, on); | 
|  | 146 |  | 
|  | 147 | return 0; | 
|  | 148 | } | 
|  | 149 |  | 
|  | 150 | static int twl6030_phy_init(struct otg_transceiver *x) | 
|  | 151 | { | 
|  | 152 | u8 hw_state; | 
|  | 153 | struct twl6030_usb *twl; | 
|  | 154 | struct device *dev; | 
|  | 155 | struct twl4030_usb_data *pdata; | 
|  | 156 |  | 
|  | 157 | twl = xceiv_to_twl(x); | 
|  | 158 | dev  = twl->dev; | 
|  | 159 | pdata = dev->platform_data; | 
|  | 160 |  | 
|  | 161 | regulator_enable(twl->usb3v3); | 
|  | 162 |  | 
|  | 163 | hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); | 
|  | 164 |  | 
|  | 165 | if (hw_state & STS_USB_ID) | 
|  | 166 | pdata->phy_power(twl->dev, 1, 1); | 
|  | 167 | else | 
|  | 168 | pdata->phy_power(twl->dev, 0, 1); | 
|  | 169 |  | 
|  | 170 | return 0; | 
|  | 171 | } | 
|  | 172 |  | 
|  | 173 | static void twl6030_phy_shutdown(struct otg_transceiver *x) | 
|  | 174 | { | 
|  | 175 | struct twl6030_usb *twl; | 
|  | 176 | struct device *dev; | 
|  | 177 | struct twl4030_usb_data *pdata; | 
|  | 178 |  | 
|  | 179 | twl = xceiv_to_twl(x); | 
|  | 180 | dev  = twl->dev; | 
|  | 181 | pdata = dev->platform_data; | 
|  | 182 | pdata->phy_power(twl->dev, 0, 0); | 
|  | 183 | regulator_disable(twl->usb3v3); | 
|  | 184 | } | 
|  | 185 |  | 
|  | 186 | static int twl6030_usb_ldo_init(struct twl6030_usb *twl) | 
|  | 187 | { | 
|  | 188 |  | 
|  | 189 | /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ | 
|  | 190 | twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); | 
|  | 191 |  | 
|  | 192 | /* Program CFG_LDO_PD2 register and set VUSB bit */ | 
|  | 193 | twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); | 
|  | 194 |  | 
|  | 195 | /* Program MISC2 register and set bit VUSB_IN_VBAT */ | 
|  | 196 | twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); | 
|  | 197 |  | 
|  | 198 | twl->usb3v3 = regulator_get(twl->dev, "vusb"); | 
|  | 199 | if (IS_ERR(twl->usb3v3)) | 
|  | 200 | return -ENODEV; | 
|  | 201 |  | 
|  | 202 | regulator_enable(twl->usb3v3); | 
|  | 203 |  | 
|  | 204 | /* Program the VUSB_CFG_TRANS for ACTIVE state. */ | 
|  | 205 | twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F, | 
|  | 206 | VUSB_CFG_TRANS); | 
|  | 207 |  | 
|  | 208 | /* Program the VUSB_CFG_STATE register to ON on all groups. */ | 
|  | 209 | twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1, | 
|  | 210 | VUSB_CFG_STATE); | 
|  | 211 |  | 
|  | 212 | /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ | 
|  | 213 | twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); | 
|  | 214 |  | 
|  | 215 | /* | 
|  | 216 | * Program the USB_ID_CTRL_SET register to enable GND drive | 
|  | 217 | * and the ID comparators | 
|  | 218 | */ | 
|  | 219 | twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); | 
|  | 220 |  | 
|  | 221 | return 0; | 
|  | 222 | } | 
|  | 223 |  | 
|  | 224 | static ssize_t twl6030_usb_vbus_show(struct device *dev, | 
|  | 225 | struct device_attribute *attr, char *buf) | 
|  | 226 | { | 
|  | 227 | struct twl6030_usb *twl = dev_get_drvdata(dev); | 
|  | 228 | unsigned long flags; | 
|  | 229 | int ret = -EINVAL; | 
|  | 230 |  | 
|  | 231 | spin_lock_irqsave(&twl->lock, flags); | 
|  | 232 |  | 
|  | 233 | switch (twl->linkstat) { | 
|  | 234 | case USB_EVENT_VBUS: | 
|  | 235 | ret = snprintf(buf, PAGE_SIZE, "vbus\n"); | 
|  | 236 | break; | 
|  | 237 | case USB_EVENT_ID: | 
|  | 238 | ret = snprintf(buf, PAGE_SIZE, "id\n"); | 
|  | 239 | break; | 
|  | 240 | case USB_EVENT_NONE: | 
|  | 241 | ret = snprintf(buf, PAGE_SIZE, "none\n"); | 
|  | 242 | break; | 
|  | 243 | default: | 
|  | 244 | ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); | 
|  | 245 | } | 
|  | 246 | spin_unlock_irqrestore(&twl->lock, flags); | 
|  | 247 |  | 
|  | 248 | return ret; | 
|  | 249 | } | 
|  | 250 | static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); | 
|  | 251 |  | 
|  | 252 | static irqreturn_t twl6030_usb_irq(int irq, void *_twl) | 
|  | 253 | { | 
|  | 254 | struct twl6030_usb *twl = _twl; | 
|  | 255 | int status; | 
|  | 256 | u8 vbus_state, hw_state; | 
|  | 257 |  | 
|  | 258 | hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); | 
|  | 259 |  | 
|  | 260 | vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, | 
|  | 261 | CONTROLLER_STAT1); | 
|  | 262 | if (!(hw_state & STS_USB_ID)) { | 
|  | 263 | if (vbus_state & VBUS_DET) { | 
|  | 264 | status = USB_EVENT_VBUS; | 
|  | 265 | twl->otg.default_a = false; | 
|  | 266 | twl->otg.state = OTG_STATE_B_IDLE; | 
|  | 267 | } else { | 
|  | 268 | status = USB_EVENT_NONE; | 
|  | 269 | } | 
|  | 270 | if (status >= 0) { | 
|  | 271 | twl->linkstat = status; | 
|  | 272 | blocking_notifier_call_chain(&twl->otg.notifier, | 
|  | 273 | status, twl->otg.gadget); | 
|  | 274 | } | 
|  | 275 | } | 
|  | 276 | sysfs_notify(&twl->dev->kobj, NULL, "vbus"); | 
|  | 277 |  | 
|  | 278 | return IRQ_HANDLED; | 
|  | 279 | } | 
|  | 280 |  | 
|  | 281 | static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) | 
|  | 282 | { | 
|  | 283 | struct twl6030_usb *twl = _twl; | 
|  | 284 | int status = USB_EVENT_NONE; | 
|  | 285 | u8 hw_state; | 
|  | 286 |  | 
|  | 287 | hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); | 
|  | 288 |  | 
|  | 289 | if (hw_state & STS_USB_ID) { | 
|  | 290 |  | 
|  | 291 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); | 
|  | 292 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, | 
|  | 293 | 0x10); | 
|  | 294 | status = USB_EVENT_ID; | 
|  | 295 | twl->otg.default_a = true; | 
|  | 296 | twl->otg.state = OTG_STATE_A_IDLE; | 
|  | 297 | blocking_notifier_call_chain(&twl->otg.notifier, status, | 
|  | 298 | twl->otg.gadget); | 
|  | 299 | } else  { | 
|  | 300 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, | 
|  | 301 | 0x10); | 
|  | 302 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, | 
|  | 303 | 0x1); | 
|  | 304 | } | 
|  | 305 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); | 
|  | 306 | twl->linkstat = status; | 
|  | 307 |  | 
|  | 308 | return IRQ_HANDLED; | 
|  | 309 | } | 
|  | 310 |  | 
|  | 311 | static int twl6030_set_peripheral(struct otg_transceiver *x, | 
|  | 312 | struct usb_gadget *gadget) | 
|  | 313 | { | 
|  | 314 | struct twl6030_usb *twl; | 
|  | 315 |  | 
|  | 316 | if (!x) | 
|  | 317 | return -ENODEV; | 
|  | 318 |  | 
|  | 319 | twl = xceiv_to_twl(x); | 
|  | 320 | twl->otg.gadget = gadget; | 
|  | 321 | if (!gadget) | 
|  | 322 | twl->otg.state = OTG_STATE_UNDEFINED; | 
|  | 323 |  | 
|  | 324 | return 0; | 
|  | 325 | } | 
|  | 326 |  | 
|  | 327 | static int twl6030_enable_irq(struct otg_transceiver *x) | 
|  | 328 | { | 
|  | 329 | struct twl6030_usb *twl = xceiv_to_twl(x); | 
|  | 330 |  | 
|  | 331 | twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1); | 
|  | 332 | twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); | 
|  | 333 | twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); | 
|  | 334 |  | 
|  | 335 | twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, | 
|  | 336 | REG_INT_MSK_LINE_C); | 
|  | 337 | twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, | 
|  | 338 | REG_INT_MSK_STS_C); | 
|  | 339 | twl6030_usb_irq(twl->irq2, twl); | 
|  | 340 | twl6030_usbotg_irq(twl->irq1, twl); | 
|  | 341 |  | 
|  | 342 | return 0; | 
|  | 343 | } | 
|  | 344 |  | 
|  | 345 | static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled) | 
|  | 346 | { | 
|  | 347 | struct twl6030_usb *twl = xceiv_to_twl(x); | 
|  | 348 |  | 
|  | 349 | /* | 
|  | 350 | * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 | 
|  | 351 | * register. This enables boost mode. | 
|  | 352 | */ | 
|  | 353 | if (enabled) | 
|  | 354 | twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, | 
|  | 355 | CHARGERUSB_CTRL1); | 
|  | 356 | else | 
|  | 357 | twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, | 
|  | 358 | CHARGERUSB_CTRL1); | 
|  | 359 | return 0; | 
|  | 360 | } | 
|  | 361 |  | 
|  | 362 | static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host) | 
|  | 363 | { | 
|  | 364 | struct twl6030_usb *twl; | 
|  | 365 |  | 
|  | 366 | if (!x) | 
|  | 367 | return -ENODEV; | 
|  | 368 |  | 
|  | 369 | twl = xceiv_to_twl(x); | 
|  | 370 | twl->otg.host = host; | 
|  | 371 | if (!host) | 
|  | 372 | twl->otg.state = OTG_STATE_UNDEFINED; | 
|  | 373 | return 0; | 
|  | 374 | } | 
|  | 375 |  | 
|  | 376 | static int __devinit twl6030_usb_probe(struct platform_device *pdev) | 
|  | 377 | { | 
|  | 378 | struct twl6030_usb	*twl; | 
|  | 379 | int			status, err; | 
|  | 380 | struct twl4030_usb_data *pdata; | 
|  | 381 | struct device *dev = &pdev->dev; | 
|  | 382 | pdata = dev->platform_data; | 
|  | 383 |  | 
|  | 384 | twl = kzalloc(sizeof *twl, GFP_KERNEL); | 
|  | 385 | if (!twl) | 
|  | 386 | return -ENOMEM; | 
|  | 387 |  | 
|  | 388 | twl->dev		= &pdev->dev; | 
|  | 389 | twl->irq1		= platform_get_irq(pdev, 0); | 
|  | 390 | twl->irq2		= platform_get_irq(pdev, 1); | 
|  | 391 | twl->otg.dev		= twl->dev; | 
|  | 392 | twl->otg.label		= "twl6030"; | 
|  | 393 | twl->otg.set_host	= twl6030_set_host; | 
|  | 394 | twl->otg.set_peripheral	= twl6030_set_peripheral; | 
|  | 395 | twl->otg.set_vbus	= twl6030_set_vbus; | 
|  | 396 | twl->otg.init		= twl6030_phy_init; | 
|  | 397 | twl->otg.shutdown	= twl6030_phy_shutdown; | 
|  | 398 |  | 
|  | 399 | /* init spinlock for workqueue */ | 
|  | 400 | spin_lock_init(&twl->lock); | 
|  | 401 |  | 
|  | 402 | err = twl6030_usb_ldo_init(twl); | 
|  | 403 | if (err) { | 
|  | 404 | dev_err(&pdev->dev, "ldo init failed\n"); | 
|  | 405 | kfree(twl); | 
|  | 406 | return err; | 
|  | 407 | } | 
|  | 408 | otg_set_transceiver(&twl->otg); | 
|  | 409 |  | 
|  | 410 | platform_set_drvdata(pdev, twl); | 
|  | 411 | if (device_create_file(&pdev->dev, &dev_attr_vbus)) | 
|  | 412 | dev_warn(&pdev->dev, "could not create sysfs file\n"); | 
|  | 413 |  | 
|  | 414 | BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier); | 
|  | 415 |  | 
|  | 416 | twl->irq_enabled = true; | 
|  | 417 | status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, | 
|  | 418 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | 
|  | 419 | "twl6030_usb", twl); | 
|  | 420 | if (status < 0) { | 
|  | 421 | dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", | 
|  | 422 | twl->irq1, status); | 
|  | 423 | device_remove_file(twl->dev, &dev_attr_vbus); | 
|  | 424 | kfree(twl); | 
|  | 425 | return status; | 
|  | 426 | } | 
|  | 427 |  | 
|  | 428 | status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, | 
|  | 429 | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, | 
|  | 430 | "twl6030_usb", twl); | 
|  | 431 | if (status < 0) { | 
|  | 432 | dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", | 
|  | 433 | twl->irq2, status); | 
|  | 434 | free_irq(twl->irq1, twl); | 
|  | 435 | device_remove_file(twl->dev, &dev_attr_vbus); | 
|  | 436 | kfree(twl); | 
|  | 437 | return status; | 
|  | 438 | } | 
|  | 439 |  | 
|  | 440 | pdata->phy_init(dev); | 
|  | 441 | twl6030_enable_irq(&twl->otg); | 
|  | 442 | dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); | 
|  | 443 |  | 
|  | 444 | return 0; | 
|  | 445 | } | 
|  | 446 |  | 
|  | 447 | static int __exit twl6030_usb_remove(struct platform_device *pdev) | 
|  | 448 | { | 
|  | 449 | struct twl6030_usb *twl = platform_get_drvdata(pdev); | 
|  | 450 |  | 
|  | 451 | struct twl4030_usb_data *pdata; | 
|  | 452 | struct device *dev = &pdev->dev; | 
|  | 453 | pdata = dev->platform_data; | 
|  | 454 |  | 
|  | 455 | twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, | 
|  | 456 | REG_INT_MSK_LINE_C); | 
|  | 457 | twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, | 
|  | 458 | REG_INT_MSK_STS_C); | 
|  | 459 | free_irq(twl->irq1, twl); | 
|  | 460 | free_irq(twl->irq2, twl); | 
|  | 461 | regulator_put(twl->usb3v3); | 
|  | 462 | pdata->phy_exit(twl->dev); | 
|  | 463 | device_remove_file(twl->dev, &dev_attr_vbus); | 
|  | 464 | kfree(twl); | 
|  | 465 |  | 
|  | 466 | return 0; | 
|  | 467 | } | 
|  | 468 |  | 
|  | 469 | static struct platform_driver twl6030_usb_driver = { | 
|  | 470 | .probe		= twl6030_usb_probe, | 
|  | 471 | .remove		= __exit_p(twl6030_usb_remove), | 
|  | 472 | .driver		= { | 
|  | 473 | .name	= "twl6030_usb", | 
|  | 474 | .owner	= THIS_MODULE, | 
|  | 475 | }, | 
|  | 476 | }; | 
|  | 477 |  | 
|  | 478 | static int __init twl6030_usb_init(void) | 
|  | 479 | { | 
|  | 480 | return platform_driver_register(&twl6030_usb_driver); | 
|  | 481 | } | 
|  | 482 | subsys_initcall(twl6030_usb_init); | 
|  | 483 |  | 
|  | 484 | static void __exit twl6030_usb_exit(void) | 
|  | 485 | { | 
|  | 486 | platform_driver_unregister(&twl6030_usb_driver); | 
|  | 487 | } | 
|  | 488 | module_exit(twl6030_usb_exit); | 
|  | 489 |  | 
|  | 490 | MODULE_ALIAS("platform:twl6030_usb"); | 
|  | 491 | MODULE_AUTHOR("Hema HK <hemahk@ti.com>"); | 
|  | 492 | MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); | 
|  | 493 | MODULE_LICENSE("GPL"); |