| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 1 | /* | 
|  | 2 | * TI CDCE949 clock synthesizer driver | 
|  | 3 | * | 
|  | 4 | * Note: This implementation assumes an input of 27MHz to the CDCE. | 
|  | 5 | * This is by no means constrained by CDCE hardware although the datasheet | 
|  | 6 | * does use this as an example for all illustrations and more importantly: | 
|  | 7 | * that is the crystal input on boards it is currently used on. | 
|  | 8 | * | 
|  | 9 | * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ | 
|  | 10 | * | 
|  | 11 | * This program is free software; you can redistribute it and/or modify | 
|  | 12 | * it under the terms of the GNU General Public License version 2 as | 
|  | 13 | * published by the Free Software Foundation. | 
|  | 14 | * | 
|  | 15 | */ | 
|  | 16 | #include <linux/kernel.h> | 
|  | 17 | #include <linux/clk.h> | 
|  | 18 | #include <linux/platform_device.h> | 
|  | 19 | #include <linux/i2c.h> | 
| Paul Gortmaker | 73017a5 | 2011-07-31 16:14:14 -0400 | [diff] [blame] | 20 | #include <linux/module.h> | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 21 |  | 
|  | 22 | #include <mach/clock.h> | 
| Kevin Hilman | 28552c2 | 2010-02-25 15:36:38 -0800 | [diff] [blame] | 23 | #include <mach/cdce949.h> | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 24 |  | 
|  | 25 | #include "clock.h" | 
|  | 26 |  | 
|  | 27 | static struct i2c_client *cdce_i2c_client; | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 28 | static DEFINE_MUTEX(cdce_mutex); | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 29 |  | 
|  | 30 | /* CDCE register descriptor */ | 
|  | 31 | struct cdce_reg { | 
|  | 32 | u8	addr; | 
|  | 33 | u8	val; | 
|  | 34 | }; | 
|  | 35 |  | 
|  | 36 | /* Per-Output (Y1, Y2 etc.) frequency descriptor */ | 
|  | 37 | struct cdce_freq { | 
|  | 38 | /* Frequency in KHz */ | 
|  | 39 | unsigned long frequency; | 
|  | 40 | /* | 
|  | 41 | * List of registers to program to obtain a particular frequency. | 
|  | 42 | * 0x0 in register address and value is the end of list marker. | 
|  | 43 | */ | 
|  | 44 | struct cdce_reg *reglist; | 
|  | 45 | }; | 
|  | 46 |  | 
|  | 47 | #define CDCE_FREQ_TABLE_ENTRY(line, out)		\ | 
|  | 48 | {							\ | 
|  | 49 | .reglist	= cdce_y ##line## _ ##out,		\ | 
|  | 50 | .frequency	= out,				\ | 
|  | 51 | } | 
|  | 52 |  | 
|  | 53 | /* List of CDCE outputs  */ | 
|  | 54 | struct cdce_output { | 
|  | 55 | /* List of frequencies on this output */ | 
|  | 56 | struct cdce_freq *freq_table; | 
|  | 57 | /* Number of possible frequencies */ | 
|  | 58 | int size; | 
|  | 59 | }; | 
|  | 60 |  | 
|  | 61 | /* | 
|  | 62 | * Finding out the values to program into CDCE949 registers for a particular | 
|  | 63 | * frequency output is not a simple calculation. Have a look at the datasheet | 
|  | 64 | * for the details. There is desktop software available to help users with | 
|  | 65 | * the calculations. Here, we just depend on the output of that software | 
|  | 66 | * (or hand calculations) instead trying to runtime calculate the register | 
|  | 67 | * values and inflicting misery on ourselves. | 
|  | 68 | */ | 
|  | 69 | static struct cdce_reg cdce_y1_148500[] = { | 
|  | 70 | { 0x13, 0x00 }, | 
|  | 71 | /* program PLL1_0 multiplier */ | 
|  | 72 | { 0x18, 0xaf }, | 
|  | 73 | { 0x19, 0x50 }, | 
|  | 74 | { 0x1a, 0x02 }, | 
|  | 75 | { 0x1b, 0xc9 }, | 
|  | 76 | /* program PLL1_11 multiplier */ | 
|  | 77 | { 0x1c, 0x00 }, | 
|  | 78 | { 0x1d, 0x40 }, | 
|  | 79 | { 0x1e, 0x02 }, | 
|  | 80 | { 0x1f, 0xc9 }, | 
|  | 81 | /* output state selection */ | 
|  | 82 | { 0x15, 0x00 }, | 
|  | 83 | { 0x14, 0xef }, | 
|  | 84 | /* switch MUX to PLL1 output */ | 
|  | 85 | { 0x14, 0x6f }, | 
|  | 86 | { 0x16, 0x06 }, | 
|  | 87 | /* set P2DIV divider, P3DIV and input crystal */ | 
|  | 88 | { 0x17, 0x06 }, | 
|  | 89 | { 0x01, 0x00 }, | 
|  | 90 | { 0x05, 0x48 }, | 
|  | 91 | { 0x02, 0x80 }, | 
|  | 92 | /* enable and disable PLL */ | 
|  | 93 | { 0x02, 0xbc }, | 
|  | 94 | { 0x03, 0x01 }, | 
|  | 95 | { }, | 
|  | 96 | }; | 
|  | 97 |  | 
|  | 98 | static struct cdce_reg cdce_y1_74250[] = { | 
|  | 99 | { 0x13, 0x00 }, | 
|  | 100 | { 0x18, 0xaf }, | 
|  | 101 | { 0x19, 0x50 }, | 
|  | 102 | { 0x1a, 0x02 }, | 
|  | 103 | { 0x1b, 0xc9 }, | 
|  | 104 | { 0x1c, 0x00 }, | 
|  | 105 | { 0x1d, 0x40 }, | 
|  | 106 | { 0x1e, 0x02 }, | 
|  | 107 | { 0x1f, 0xc9 }, | 
|  | 108 | /* output state selection */ | 
|  | 109 | { 0x15, 0x00 }, | 
|  | 110 | { 0x14, 0xef }, | 
|  | 111 | /* switch MUX to PLL1 output */ | 
|  | 112 | { 0x14, 0x6f }, | 
|  | 113 | { 0x16, 0x06 }, | 
|  | 114 | /* set P2DIV divider, P3DIV and input crystal */ | 
|  | 115 | { 0x17, 0x06 }, | 
|  | 116 | { 0x01, 0x00 }, | 
|  | 117 | { 0x05, 0x48 }, | 
|  | 118 | { 0x02, 0x80 }, | 
|  | 119 | /* enable and disable PLL */ | 
|  | 120 | { 0x02, 0xbc }, | 
|  | 121 | { 0x03, 0x02 }, | 
|  | 122 | { }, | 
|  | 123 | }; | 
|  | 124 |  | 
|  | 125 | static struct cdce_reg cdce_y1_27000[] = { | 
|  | 126 | { 0x13, 0x00 }, | 
|  | 127 | { 0x18, 0x00 }, | 
|  | 128 | { 0x19, 0x40 }, | 
|  | 129 | { 0x1a, 0x02 }, | 
|  | 130 | { 0x1b, 0x08 }, | 
|  | 131 | { 0x1c, 0x00 }, | 
|  | 132 | { 0x1d, 0x40 }, | 
|  | 133 | { 0x1e, 0x02 }, | 
|  | 134 | { 0x1f, 0x08 }, | 
|  | 135 | { 0x15, 0x02 }, | 
|  | 136 | { 0x14, 0xed }, | 
|  | 137 | { 0x16, 0x01 }, | 
|  | 138 | { 0x17, 0x01 }, | 
|  | 139 | { 0x01, 0x00 }, | 
|  | 140 | { 0x05, 0x50 }, | 
|  | 141 | { 0x02, 0xb4 }, | 
|  | 142 | { 0x03, 0x01 }, | 
|  | 143 | { }, | 
|  | 144 | }; | 
|  | 145 |  | 
|  | 146 | static struct cdce_freq cdce_y1_freqs[] = { | 
|  | 147 | CDCE_FREQ_TABLE_ENTRY(1, 148500), | 
|  | 148 | CDCE_FREQ_TABLE_ENTRY(1, 74250), | 
|  | 149 | CDCE_FREQ_TABLE_ENTRY(1, 27000), | 
|  | 150 | }; | 
|  | 151 |  | 
|  | 152 | static struct cdce_reg cdce_y5_13500[] = { | 
|  | 153 | { 0x27, 0x08 }, | 
|  | 154 | { 0x28, 0x00 }, | 
|  | 155 | { 0x29, 0x40 }, | 
|  | 156 | { 0x2a, 0x02 }, | 
|  | 157 | { 0x2b, 0x08 }, | 
|  | 158 | { 0x24, 0x6f }, | 
|  | 159 | { }, | 
|  | 160 | }; | 
|  | 161 |  | 
|  | 162 | static struct cdce_reg cdce_y5_16875[] = { | 
|  | 163 | { 0x27, 0x08 }, | 
|  | 164 | { 0x28, 0x9f }, | 
|  | 165 | { 0x29, 0xb0 }, | 
|  | 166 | { 0x2a, 0x02 }, | 
|  | 167 | { 0x2b, 0x89 }, | 
|  | 168 | { 0x24, 0x6f }, | 
|  | 169 | { }, | 
|  | 170 | }; | 
|  | 171 |  | 
|  | 172 | static struct cdce_reg cdce_y5_27000[] = { | 
|  | 173 | { 0x27, 0x04 }, | 
|  | 174 | { 0x28, 0x00 }, | 
|  | 175 | { 0x29, 0x40 }, | 
|  | 176 | { 0x2a, 0x02 }, | 
|  | 177 | { 0x2b, 0x08 }, | 
|  | 178 | { 0x24, 0x6f }, | 
|  | 179 | { }, | 
|  | 180 | }; | 
|  | 181 | static struct cdce_reg cdce_y5_54000[] = { | 
|  | 182 | { 0x27, 0x04 }, | 
|  | 183 | { 0x28, 0xff }, | 
|  | 184 | { 0x29, 0x80 }, | 
|  | 185 | { 0x2a, 0x02 }, | 
|  | 186 | { 0x2b, 0x07 }, | 
|  | 187 | { 0x24, 0x6f }, | 
|  | 188 | { }, | 
|  | 189 | }; | 
|  | 190 |  | 
|  | 191 | static struct cdce_reg cdce_y5_81000[] = { | 
|  | 192 | { 0x27, 0x02 }, | 
|  | 193 | { 0x28, 0xbf }, | 
|  | 194 | { 0x29, 0xa0 }, | 
|  | 195 | { 0x2a, 0x03 }, | 
|  | 196 | { 0x2b, 0x0a }, | 
|  | 197 | { 0x24, 0x6f }, | 
|  | 198 | { }, | 
|  | 199 | }; | 
|  | 200 |  | 
|  | 201 | static struct cdce_freq cdce_y5_freqs[] = { | 
|  | 202 | CDCE_FREQ_TABLE_ENTRY(5, 13500), | 
|  | 203 | CDCE_FREQ_TABLE_ENTRY(5, 16875), | 
|  | 204 | CDCE_FREQ_TABLE_ENTRY(5, 27000), | 
|  | 205 | CDCE_FREQ_TABLE_ENTRY(5, 54000), | 
|  | 206 | CDCE_FREQ_TABLE_ENTRY(5, 81000), | 
|  | 207 | }; | 
|  | 208 |  | 
|  | 209 |  | 
|  | 210 | static struct cdce_output output_list[] = { | 
|  | 211 | [1]	= { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, | 
|  | 212 | [5]	= { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, | 
|  | 213 | }; | 
|  | 214 |  | 
|  | 215 | int cdce_set_rate(struct clk *clk, unsigned long rate) | 
|  | 216 | { | 
|  | 217 | int i, ret = 0; | 
|  | 218 | struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; | 
|  | 219 | struct cdce_reg  *regs = NULL; | 
|  | 220 |  | 
|  | 221 | if (!cdce_i2c_client) | 
|  | 222 | return -ENODEV; | 
|  | 223 |  | 
|  | 224 | if (!freq_table) | 
|  | 225 | return -EINVAL; | 
|  | 226 |  | 
|  | 227 | for (i = 0; i < output_list[clk->lpsc].size; i++) { | 
|  | 228 | if (freq_table[i].frequency == rate / 1000) { | 
|  | 229 | regs = freq_table[i].reglist; | 
|  | 230 | break; | 
|  | 231 | } | 
|  | 232 | } | 
|  | 233 |  | 
|  | 234 | if (!regs) | 
|  | 235 | return -EINVAL; | 
|  | 236 |  | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 237 | mutex_lock(&cdce_mutex); | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 238 | for (i = 0; regs[i].addr; i++) { | 
|  | 239 | ret = i2c_smbus_write_byte_data(cdce_i2c_client, | 
|  | 240 | regs[i].addr | 0x80, regs[i].val); | 
|  | 241 | if (ret) | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 242 | break; | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 243 | } | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 244 | mutex_unlock(&cdce_mutex); | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 245 |  | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 246 | if (!ret) | 
|  | 247 | clk->rate = rate; | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 248 |  | 
| Sekhar Nori | 3b43cd6 | 2010-01-12 18:55:35 +0530 | [diff] [blame] | 249 | return ret; | 
| Nageswari Srinivasan | 5b8972d | 2010-01-06 17:19:48 +0530 | [diff] [blame] | 250 | } | 
|  | 251 |  | 
|  | 252 | static int cdce_probe(struct i2c_client *client, | 
|  | 253 | const struct i2c_device_id *id) | 
|  | 254 | { | 
|  | 255 | cdce_i2c_client = client; | 
|  | 256 | return 0; | 
|  | 257 | } | 
|  | 258 |  | 
|  | 259 | static int __devexit cdce_remove(struct i2c_client *client) | 
|  | 260 | { | 
|  | 261 | cdce_i2c_client = NULL; | 
|  | 262 | return 0; | 
|  | 263 | } | 
|  | 264 |  | 
|  | 265 | static const struct i2c_device_id cdce_id[] = { | 
|  | 266 | {"cdce949", 0}, | 
|  | 267 | {}, | 
|  | 268 | }; | 
|  | 269 | MODULE_DEVICE_TABLE(i2c, cdce_id); | 
|  | 270 |  | 
|  | 271 | static struct i2c_driver cdce_driver = { | 
|  | 272 | .driver = { | 
|  | 273 | .owner	= THIS_MODULE, | 
|  | 274 | .name	= "cdce949", | 
|  | 275 | }, | 
|  | 276 | .probe		= cdce_probe, | 
|  | 277 | .remove		= __devexit_p(cdce_remove), | 
|  | 278 | .id_table	= cdce_id, | 
|  | 279 | }; | 
|  | 280 |  | 
|  | 281 | static int __init cdce_init(void) | 
|  | 282 | { | 
|  | 283 | return i2c_add_driver(&cdce_driver); | 
|  | 284 | } | 
|  | 285 | subsys_initcall(cdce_init); | 
|  | 286 |  | 
|  | 287 | static void __exit cdce_exit(void) | 
|  | 288 | { | 
|  | 289 | i2c_del_driver(&cdce_driver); | 
|  | 290 | } | 
|  | 291 | module_exit(cdce_exit); | 
|  | 292 |  | 
|  | 293 | MODULE_AUTHOR("Texas Instruments"); | 
|  | 294 | MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); | 
|  | 295 | MODULE_LICENSE("GPL v2"); |