| Mark Jackson | 5b50c16 | 2008-10-13 13:14:50 +0000 | [diff] [blame] | 1 | /* | 
 | 2 |  * MIMC200 board-specific flash initialization | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2008 Mercury IMC Ltd | 
 | 5 |  * | 
 | 6 |  * This program is free software; you can redistribute it and/or modify | 
 | 7 |  * it under the terms of the GNU General Public License version 2 as | 
 | 8 |  * published by the Free Software Foundation. | 
 | 9 |  */ | 
 | 10 | #include <linux/init.h> | 
 | 11 | #include <linux/platform_device.h> | 
 | 12 | #include <linux/mtd/mtd.h> | 
 | 13 | #include <linux/mtd/partitions.h> | 
 | 14 | #include <linux/mtd/physmap.h> | 
 | 15 |  | 
 | 16 | #include <mach/smc.h> | 
 | 17 |  | 
 | 18 | static struct smc_timing flash_timing __initdata = { | 
 | 19 | 	.ncs_read_setup		= 0, | 
 | 20 | 	.nrd_setup		= 15, | 
 | 21 | 	.ncs_write_setup	= 0, | 
 | 22 | 	.nwe_setup		= 0, | 
 | 23 |  | 
 | 24 | 	.ncs_read_pulse		= 115, | 
 | 25 | 	.nrd_pulse		= 110, | 
 | 26 | 	.ncs_write_pulse	= 60, | 
 | 27 | 	.nwe_pulse		= 60, | 
 | 28 |  | 
 | 29 | 	.read_cycle		= 115, | 
 | 30 | 	.write_cycle		= 100, | 
 | 31 | }; | 
 | 32 |  | 
 | 33 | static struct smc_config flash_config __initdata = { | 
 | 34 | 	.bus_width		= 2, | 
 | 35 | 	.nrd_controlled		= 1, | 
 | 36 | 	.nwe_controlled		= 1, | 
 | 37 | 	.byte_write		= 1, | 
 | 38 | }; | 
 | 39 |  | 
 | 40 | /* system flash definition */ | 
 | 41 |  | 
 | 42 | static struct mtd_partition flash_parts_system[] = { | 
 | 43 | 	{ | 
 | 44 | 		.name           = "u-boot", | 
 | 45 | 		.offset         = 0x00000000, | 
 | 46 | 		.size           = 0x00020000,           /* 128 KiB */ | 
 | 47 | 		.mask_flags     = MTD_WRITEABLE, | 
 | 48 | 	}, | 
 | 49 | 	{ | 
 | 50 | 		.name           = "root", | 
 | 51 | 		.offset         = 0x00020000, | 
 | 52 | 		.size           = 0x007c0000, | 
 | 53 | 	}, | 
 | 54 | 	{ | 
 | 55 | 		.name		= "splash", | 
 | 56 | 		.offset		= 0x007e0000, | 
 | 57 | 		.size		= 0x00010000,		/* 64KiB */ | 
 | 58 | 	}, | 
 | 59 | 	{ | 
 | 60 | 		.name           = "env", | 
 | 61 | 		.offset         = 0x007f0000, | 
 | 62 | 		.size           = 0x00010000, | 
 | 63 | 		.mask_flags     = MTD_WRITEABLE, | 
 | 64 | 	}, | 
 | 65 | }; | 
 | 66 |  | 
 | 67 | static struct physmap_flash_data flash_system = { | 
 | 68 | 	.width		= 2, | 
 | 69 | 	.nr_parts	= ARRAY_SIZE(flash_parts_system), | 
 | 70 | 	.parts		= flash_parts_system, | 
 | 71 | }; | 
 | 72 |  | 
 | 73 | static struct resource flash_resource_system = { | 
 | 74 | 	.start		= 0x00000000, | 
 | 75 | 	.end		= 0x007fffff, | 
 | 76 | 	.flags		= IORESOURCE_MEM, | 
 | 77 | }; | 
 | 78 |  | 
 | 79 | static struct platform_device flash_device_system = { | 
 | 80 | 	.name		= "physmap-flash", | 
 | 81 | 	.id		= 0, | 
 | 82 | 	.resource	= &flash_resource_system, | 
 | 83 | 	.num_resources	= 1, | 
 | 84 | 	.dev		= { | 
 | 85 | 		.platform_data = &flash_system, | 
 | 86 | 	}, | 
 | 87 | }; | 
 | 88 |  | 
 | 89 | /* data flash definition */ | 
 | 90 |  | 
 | 91 | static struct mtd_partition flash_parts_data[] = { | 
 | 92 | 	{ | 
 | 93 | 		.name		= "data", | 
 | 94 | 		.offset		= 0x00000000, | 
 | 95 | 		.size		= 0x00800000, | 
 | 96 | 	}, | 
 | 97 | }; | 
 | 98 |  | 
 | 99 | static struct physmap_flash_data flash_data = { | 
 | 100 | 	.width		= 2, | 
 | 101 | 	.nr_parts	= ARRAY_SIZE(flash_parts_data), | 
 | 102 | 	.parts		= flash_parts_data, | 
 | 103 | }; | 
 | 104 |  | 
 | 105 | static struct resource flash_resource_data = { | 
 | 106 | 	.start		= 0x08000000, | 
 | 107 | 	.end		= 0x087fffff, | 
 | 108 | 	.flags		= IORESOURCE_MEM, | 
 | 109 | }; | 
 | 110 |  | 
 | 111 | static struct platform_device flash_device_data = { | 
 | 112 | 	.name		= "physmap-flash", | 
 | 113 | 	.id		= 1, | 
 | 114 | 	.resource	= &flash_resource_data, | 
 | 115 | 	.num_resources	= 1, | 
 | 116 | 	.dev		= { | 
 | 117 | 		.platform_data = &flash_data, | 
 | 118 | 	}, | 
 | 119 | }; | 
 | 120 |  | 
 | 121 | /* This needs to be called after the SMC has been initialized */ | 
 | 122 | static int __init mimc200_flash_init(void) | 
 | 123 | { | 
 | 124 | 	int ret; | 
 | 125 |  | 
 | 126 | 	smc_set_timing(&flash_config, &flash_timing); | 
 | 127 | 	ret = smc_set_configuration(0, &flash_config); | 
 | 128 | 	if (ret < 0) { | 
 | 129 | 		printk(KERN_ERR "mimc200: failed to set 'System' NOR flash timing\n"); | 
 | 130 | 		return ret; | 
 | 131 | 	} | 
 | 132 | 	ret = smc_set_configuration(1, &flash_config); | 
 | 133 | 	if (ret < 0) { | 
 | 134 | 		printk(KERN_ERR "mimc200: failed to set 'Data' NOR flash timing\n"); | 
 | 135 | 		return ret; | 
 | 136 | 	} | 
 | 137 |  | 
 | 138 | 	platform_device_register(&flash_device_system); | 
 | 139 | 	platform_device_register(&flash_device_data); | 
 | 140 |  | 
 | 141 | 	return 0; | 
 | 142 | } | 
 | 143 | device_initcall(mimc200_flash_init); |