| Heiko Schocher | 5c3d8a4 | 2012-07-30 07:21:12 +0000 | [diff] [blame] | 1 | * Texas Instruments Davinci I2C |
| 2 | |
| 3 | This file provides information, what the device node for the |
| 4 | davinci i2c interface contain. |
| 5 | |
| 6 | Required properties: |
| 7 | - compatible: "ti,davinci-i2c"; |
| 8 | - reg : Offset and length of the register set for the device |
| 9 | |
| 10 | Recommended properties : |
| 11 | - interrupts : standard interrupt property. |
| 12 | - clock-frequency : desired I2C bus clock frequency in Hz. |
| 13 | |
| 14 | Example (enbw_cmc board): |
| 15 | i2c@1c22000 { |
| 16 | compatible = "ti,davinci-i2c"; |
| 17 | reg = <0x22000 0x1000>; |
| 18 | clock-frequency = <100000>; |
| 19 | interrupts = <15>; |
| 20 | interrupt-parent = <&intc>; |
| 21 | #address-cells = <1>; |
| 22 | #size-cells = <0>; |
| 23 | |
| 24 | dtt@48 { |
| 25 | compatible = "national,lm75"; |
| 26 | reg = <0x48>; |
| 27 | }; |
| 28 | }; |