| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 1 | What: /sys/class/hidraw/hidraw*/device/speed |
| 2 | Date: April 2010 |
| 3 | Kernel Version: 2.6.35 |
| 4 | Contact: linux-bluetooth@vger.kernel.org |
| 5 | Description: |
| 6 | The /sys/class/hidraw/hidraw*/device/speed file controls |
| 7 | reporting speed of Wacom bluetooth tablet. Reading from |
| 8 | this file returns 1 if tablet reports in high speed mode |
| 9 | or 0 otherwise. Writing to this file one of these values |
| 10 | switches reporting speed. |
| 11 | |
| 12 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led |
| 13 | Date: August 2011 |
| 14 | Contact: linux-input@vger.kernel.org |
| 15 | Description: |
| Ping Cheng | 09e7d94 | 2011-10-04 23:51:14 -0700 | [diff] [blame] | 16 | Attribute group for control of the status LEDs and the OLEDs. |
| 17 | This attribute group is only available for Intuos 4 M, L, |
| Jason Gerecke | 9b5b95d | 2012-04-03 15:50:37 -0700 | [diff] [blame^] | 18 | and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq |
| 19 | 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence |
| 20 | implicitly signifies the presence of said LEDs and OLEDs on the |
| 21 | tablet device. |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 22 | |
| 23 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance |
| 24 | Date: August 2011 |
| 25 | Contact: linux-input@vger.kernel.org |
| 26 | Description: |
| Ping Cheng | 77e8251 | 2011-10-04 23:50:42 -0700 | [diff] [blame] | 27 | Writing to this file sets the status LED luminance (1..127) |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 28 | when the stylus does not touch the tablet surface, and no |
| Ping Cheng | f4fa9a6 | 2011-10-04 23:49:42 -0700 | [diff] [blame] | 29 | button is pressed on the stylus. This luminance level is |
| 30 | normally lower than the level when a button is pressed. |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 31 | |
| 32 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance |
| 33 | Date: August 2011 |
| 34 | Contact: linux-input@vger.kernel.org |
| 35 | Description: |
| Ping Cheng | 77e8251 | 2011-10-04 23:50:42 -0700 | [diff] [blame] | 36 | Writing to this file sets the status LED luminance (1..127) |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 37 | when the stylus touches the tablet surface, or any button is |
| 38 | pressed on the stylus. |
| 39 | |
| Ping Cheng | 09e7d94 | 2011-10-04 23:51:14 -0700 | [diff] [blame] | 40 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 41 | Date: August 2011 |
| 42 | Contact: linux-input@vger.kernel.org |
| 43 | Description: |
| Jason Gerecke | 9b5b95d | 2012-04-03 15:50:37 -0700 | [diff] [blame^] | 44 | Writing to this file sets which one of the four (for Intuos 4 |
| 45 | and Intuos 5) or of the right four (for Cintiq 21UX2 and Cintiq |
| 46 | 24HD) status LEDs is active (0..3). The other three LEDs on the |
| 47 | same side are always inactive. |
| Ping Cheng | 09e7d94 | 2011-10-04 23:51:14 -0700 | [diff] [blame] | 48 | |
| 49 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select |
| 50 | Date: September 2011 |
| 51 | Contact: linux-input@vger.kernel.org |
| 52 | Description: |
| Jason Gerecke | 246835f | 2011-12-12 00:12:04 -0800 | [diff] [blame] | 53 | Writing to this file sets which one of the left four (for Cintiq 21UX2 |
| 54 | and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on |
| 55 | the left are always inactive. |
| Eduard Hasenleithner | 5d7e7d4 | 2011-09-07 14:08:54 -0700 | [diff] [blame] | 56 | |
| 57 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance |
| 58 | Date: August 2011 |
| 59 | Contact: linux-input@vger.kernel.org |
| 60 | Description: |
| 61 | Writing to this file sets the overall luminance level (0..15) |
| 62 | of all eight button OLED displays. |
| 63 | |
| 64 | What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg |
| 65 | Date: August 2011 |
| 66 | Contact: linux-input@vger.kernel.org |
| 67 | Description: |
| 68 | When writing a 1024 byte raw image in Wacom Intuos 4 |
| 69 | interleaving format to the file, the image shows up on Button N |
| 70 | of the device. The image is a 64x32 pixel 4-bit gray image. The |
| 71 | 1024 byte binary is split up into 16x 64 byte chunks. Each 64 |
| 72 | byte chunk encodes the image data for two consecutive lines on |
| 73 | the display. The low nibble of each byte contains the first |
| 74 | line, and the high nibble contains the second line. |