| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | |
| 2 | Fax with isdn4linux |
| 3 | =================== |
| 4 | |
| 5 | When enabled during kernel configuration, the tty emulator |
| 6 | of the ISDN subsystem is capable of the Fax Class 2 commands. |
| 7 | |
| 8 | This only makes sense under the following conditions : |
| 9 | |
| 10 | - You need the commands as dummy, because you are using |
| 11 | hylafax (with patch) for AVM capi. |
| 12 | - You want to use the fax capabilities of your isdn-card. |
| 13 | (supported cards are listed below) |
| 14 | |
| 15 | |
| 16 | NOTE: This implementation does *not* support fax with passive |
| 17 | ISDN-cards (known as softfax). The low-level driver of |
| 18 | the ISDN-card and/or the card itself must support this. |
| 19 | |
| 20 | |
| 21 | Supported ISDN-Cards |
| 22 | -------------------- |
| 23 | |
| 24 | Eicon DIVA Server BRI/PCI |
| 25 | - full support with both B-channels. |
| 26 | |
| 27 | Eicon DIVA Server 4BRI/PCI |
| 28 | - full support with all B-channels. |
| 29 | |
| 30 | Eicon DIVA Server PRI/PCI |
| 31 | - full support on amount of B-channels |
| 32 | depending on DSPs on board. |
| 33 | |
| 34 | |
| 35 | |
| 36 | The command set is known as Class 2 (not Class 2.0) and |
| 37 | can be activated by AT+FCLASS=2 |
| 38 | |
| 39 | |
| 40 | The interface between the link-level-module and the hardware-level driver |
| 41 | is described in the files INTERFACE.fax and INTERFACE. |
| 42 | |
| 43 | Armin |
| 44 | mac@melware.de |
| 45 | |