| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 1 | /* | 
|  | 2 | * Copyright (c) 2008 open80211s Ltd. | 
|  | 3 | * Authors:    Luis Carlos Cobo <luisca@cozybit.com> | 
|  | 4 | * 	       Javier Cardona <javier@cozybit.com> | 
|  | 5 | * | 
|  | 6 | * This program is free software; you can redistribute it and/or modify | 
|  | 7 | * it under the terms of the GNU General Public License version 2 as | 
|  | 8 | * published by the Free Software Foundation. | 
|  | 9 | */ | 
|  | 10 |  | 
|  | 11 | #include "ieee80211_i.h" | 
|  | 12 | #include "mesh.h" | 
|  | 13 |  | 
| John W. Linville | 2473670 | 2008-04-08 14:15:46 -0400 | [diff] [blame] | 14 | #define PP_OFFSET 	1		/* Path Selection Protocol */ | 
|  | 15 | #define PM_OFFSET	5		/* Path Selection Metric   */ | 
|  | 16 | #define CC_OFFSET	9		/* Congestion Control Mode */ | 
|  | 17 | #define CAPAB_OFFSET 17 | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 18 | #define ACCEPT_PLINKS 0x80 | 
|  | 19 |  | 
|  | 20 | int mesh_allocated; | 
|  | 21 | static struct kmem_cache *rm_cache; | 
|  | 22 |  | 
|  | 23 | void ieee80211s_init(void) | 
|  | 24 | { | 
|  | 25 | mesh_pathtbl_init(); | 
|  | 26 | mesh_allocated = 1; | 
|  | 27 | rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry), | 
|  | 28 | 0, 0, NULL); | 
|  | 29 | } | 
|  | 30 |  | 
|  | 31 | void ieee80211s_stop(void) | 
|  | 32 | { | 
|  | 33 | mesh_pathtbl_unregister(); | 
|  | 34 | kmem_cache_destroy(rm_cache); | 
|  | 35 | } | 
|  | 36 |  | 
|  | 37 | /** | 
|  | 38 | * mesh_matches_local - check if the config of a mesh point matches ours | 
|  | 39 | * | 
|  | 40 | * @ie: information elements of a management frame from the mesh peer | 
|  | 41 | * @dev: local mesh interface | 
|  | 42 | * | 
|  | 43 | * This function checks if the mesh configuration of a mesh point matches the | 
|  | 44 | * local mesh configuration, i.e. if both nodes belong to the same mesh network. | 
|  | 45 | */ | 
|  | 46 | bool mesh_matches_local(struct ieee802_11_elems *ie, struct net_device *dev) | 
|  | 47 | { | 
|  | 48 | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | 49 | struct ieee80211_if_sta *sta = &sdata->u.sta; | 
|  | 50 |  | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 51 | /* | 
|  | 52 | * As support for each feature is added, check for matching | 
|  | 53 | * - On mesh config capabilities | 
|  | 54 | *   - Power Save Support En | 
|  | 55 | *   - Sync support enabled | 
|  | 56 | *   - Sync support active | 
|  | 57 | *   - Sync support required from peer | 
|  | 58 | *   - MDA enabled | 
|  | 59 | * - Power management control on fc | 
|  | 60 | */ | 
| Luis Carlos Cobo | 3b091cd | 2008-02-29 12:20:39 -0800 | [diff] [blame] | 61 | if (sta->mesh_id_len == ie->mesh_id_len && | 
|  | 62 | memcmp(sta->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 && | 
|  | 63 | memcmp(sta->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 && | 
|  | 64 | memcmp(sta->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 && | 
|  | 65 | memcmp(sta->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0) | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 66 | return true; | 
|  | 67 |  | 
|  | 68 | return false; | 
|  | 69 | } | 
|  | 70 |  | 
|  | 71 | /** | 
|  | 72 | * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links | 
|  | 73 | * | 
|  | 74 | * @ie: information elements of a management frame from the mesh peer | 
|  | 75 | * @dev: local mesh interface | 
|  | 76 | */ | 
|  | 77 | bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie, | 
|  | 78 | struct net_device *dev) | 
|  | 79 | { | 
|  | 80 | return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0; | 
|  | 81 | } | 
|  | 82 |  | 
|  | 83 | /** | 
|  | 84 | * mesh_accept_plinks_update: update accepting_plink in local mesh beacons | 
|  | 85 | * | 
| Johannes Berg | d0709a6 | 2008-02-25 16:27:46 +0100 | [diff] [blame] | 86 | * @sdata: mesh interface in which mesh beacons are going to be updated | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 87 | */ | 
| Johannes Berg | d0709a6 | 2008-02-25 16:27:46 +0100 | [diff] [blame] | 88 | void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 89 | { | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 90 | bool free_plinks; | 
|  | 91 |  | 
|  | 92 | /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0, | 
|  | 93 | * the mesh interface might be able to establish plinks with peers that | 
| Luis Carlos Cobo | b4e08ea | 2008-02-29 15:46:08 -0800 | [diff] [blame] | 94 | * are already on the table but are not on PLINK_ESTAB state. However, | 
|  | 95 | * in general the mesh interface is not accepting peer link requests | 
|  | 96 | * from new peers, and that must be reflected in the beacon | 
| Luis Carlos Cobo | 2e3c873 | 2008-02-23 15:17:09 +0100 | [diff] [blame] | 97 | */ | 
|  | 98 | free_plinks = mesh_plink_availables(sdata); | 
|  | 99 |  | 
|  | 100 | if (free_plinks != sdata->u.sta.accepting_plinks) | 
|  | 101 | ieee80211_sta_timer((unsigned long) sdata); | 
|  | 102 | } | 
|  | 103 |  | 
|  | 104 | void mesh_ids_set_default(struct ieee80211_if_sta *sta) | 
|  | 105 | { | 
|  | 106 | u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff}; | 
|  | 107 |  | 
|  | 108 | memcpy(sta->mesh_pp_id, def_id, 4); | 
|  | 109 | memcpy(sta->mesh_pm_id, def_id, 4); | 
|  | 110 | memcpy(sta->mesh_cc_id, def_id, 4); | 
|  | 111 | } | 
|  | 112 |  | 
|  | 113 | int mesh_rmc_init(struct net_device *dev) | 
|  | 114 | { | 
|  | 115 | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | 116 | int i; | 
|  | 117 |  | 
|  | 118 | sdata->u.sta.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL); | 
|  | 119 | if (!sdata->u.sta.rmc) | 
|  | 120 | return -ENOMEM; | 
|  | 121 | sdata->u.sta.rmc->idx_mask = RMC_BUCKETS - 1; | 
|  | 122 | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | 123 | INIT_LIST_HEAD(&sdata->u.sta.rmc->bucket[i].list); | 
|  | 124 | return 0; | 
|  | 125 | } | 
|  | 126 |  | 
|  | 127 | void mesh_rmc_free(struct net_device *dev) | 
|  | 128 | { | 
|  | 129 | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | 130 | struct mesh_rmc *rmc = sdata->u.sta.rmc; | 
|  | 131 | struct rmc_entry *p, *n; | 
|  | 132 | int i; | 
|  | 133 |  | 
|  | 134 | if (!sdata->u.sta.rmc) | 
|  | 135 | return; | 
|  | 136 |  | 
|  | 137 | for (i = 0; i < RMC_BUCKETS; i++) | 
|  | 138 | list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) { | 
|  | 139 | list_del(&p->list); | 
|  | 140 | kmem_cache_free(rm_cache, p); | 
|  | 141 | } | 
|  | 142 |  | 
|  | 143 | kfree(rmc); | 
|  | 144 | sdata->u.sta.rmc = NULL; | 
|  | 145 | } | 
|  | 146 |  | 
|  | 147 | /** | 
|  | 148 | * mesh_rmc_check - Check frame in recent multicast cache and add if absent. | 
|  | 149 | * | 
|  | 150 | * @sa:		source address | 
|  | 151 | * @mesh_hdr:	mesh_header | 
|  | 152 | * | 
|  | 153 | * Returns: 0 if the frame is not in the cache, nonzero otherwise. | 
|  | 154 | * | 
|  | 155 | * Checks using the source address and the mesh sequence number if we have | 
|  | 156 | * received this frame lately. If the frame is not in the cache, it is added to | 
|  | 157 | * it. | 
|  | 158 | */ | 
|  | 159 | int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr, | 
|  | 160 | struct net_device *dev) | 
|  | 161 | { | 
|  | 162 | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | 163 | struct mesh_rmc *rmc = sdata->u.sta.rmc; | 
|  | 164 | u32 seqnum = 0; | 
|  | 165 | int entries = 0; | 
|  | 166 | u8 idx; | 
|  | 167 | struct rmc_entry *p, *n; | 
|  | 168 |  | 
|  | 169 | /* Don't care about endianness since only match matters */ | 
|  | 170 | memcpy(&seqnum, mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum)); | 
|  | 171 | idx = mesh_hdr->seqnum[0] & rmc->idx_mask; | 
|  | 172 | list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) { | 
|  | 173 | ++entries; | 
|  | 174 | if (time_after(jiffies, p->exp_time) || | 
|  | 175 | (entries == RMC_QUEUE_MAX_LEN)) { | 
|  | 176 | list_del(&p->list); | 
|  | 177 | kmem_cache_free(rm_cache, p); | 
|  | 178 | --entries; | 
|  | 179 | } else if ((seqnum == p->seqnum) | 
|  | 180 | && (memcmp(sa, p->sa, ETH_ALEN) == 0)) | 
|  | 181 | return -1; | 
|  | 182 | } | 
|  | 183 |  | 
|  | 184 | p = kmem_cache_alloc(rm_cache, GFP_ATOMIC); | 
|  | 185 | if (!p) { | 
|  | 186 | printk(KERN_DEBUG "o11s: could not allocate RMC entry\n"); | 
|  | 187 | return 0; | 
|  | 188 | } | 
|  | 189 | p->seqnum = seqnum; | 
|  | 190 | p->exp_time = jiffies + RMC_TIMEOUT; | 
|  | 191 | memcpy(p->sa, sa, ETH_ALEN); | 
|  | 192 | list_add(&p->list, &rmc->bucket[idx].list); | 
|  | 193 | return 0; | 
|  | 194 | } | 
|  | 195 |  | 
|  | 196 | void mesh_mgmt_ies_add(struct sk_buff *skb, struct net_device *dev) | 
|  | 197 | { | 
|  | 198 | struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
|  | 199 | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | 200 | struct ieee80211_supported_band *sband; | 
|  | 201 | u8 *pos; | 
|  | 202 | int len, i, rate; | 
|  | 203 |  | 
|  | 204 | sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; | 
|  | 205 | len = sband->n_bitrates; | 
|  | 206 | if (len > 8) | 
|  | 207 | len = 8; | 
|  | 208 | pos = skb_put(skb, len + 2); | 
|  | 209 | *pos++ = WLAN_EID_SUPP_RATES; | 
|  | 210 | *pos++ = len; | 
|  | 211 | for (i = 0; i < len; i++) { | 
|  | 212 | rate = sband->bitrates[i].bitrate; | 
|  | 213 | *pos++ = (u8) (rate / 5); | 
|  | 214 | } | 
|  | 215 |  | 
|  | 216 | if (sband->n_bitrates > len) { | 
|  | 217 | pos = skb_put(skb, sband->n_bitrates - len + 2); | 
|  | 218 | *pos++ = WLAN_EID_EXT_SUPP_RATES; | 
|  | 219 | *pos++ = sband->n_bitrates - len; | 
|  | 220 | for (i = len; i < sband->n_bitrates; i++) { | 
|  | 221 | rate = sband->bitrates[i].bitrate; | 
|  | 222 | *pos++ = (u8) (rate / 5); | 
|  | 223 | } | 
|  | 224 | } | 
|  | 225 |  | 
|  | 226 | pos = skb_put(skb, 2 + sdata->u.sta.mesh_id_len); | 
|  | 227 | *pos++ = WLAN_EID_MESH_ID; | 
|  | 228 | *pos++ = sdata->u.sta.mesh_id_len; | 
|  | 229 | if (sdata->u.sta.mesh_id_len) | 
|  | 230 | memcpy(pos, sdata->u.sta.mesh_id, sdata->u.sta.mesh_id_len); | 
|  | 231 |  | 
|  | 232 | pos = skb_put(skb, 21); | 
|  | 233 | *pos++ = WLAN_EID_MESH_CONFIG; | 
|  | 234 | *pos++ = MESH_CFG_LEN; | 
|  | 235 | /* Version */ | 
|  | 236 | *pos++ = 1; | 
|  | 237 |  | 
|  | 238 | /* Active path selection protocol ID */ | 
|  | 239 | memcpy(pos, sdata->u.sta.mesh_pp_id, 4); | 
|  | 240 | pos += 4; | 
|  | 241 |  | 
|  | 242 | /* Active path selection metric ID   */ | 
|  | 243 | memcpy(pos, sdata->u.sta.mesh_pm_id, 4); | 
|  | 244 | pos += 4; | 
|  | 245 |  | 
|  | 246 | /* Congestion control mode identifier */ | 
|  | 247 | memcpy(pos, sdata->u.sta.mesh_cc_id, 4); | 
|  | 248 | pos += 4; | 
|  | 249 |  | 
|  | 250 | /* Channel precedence: | 
|  | 251 | * Not running simple channel unification protocol | 
|  | 252 | */ | 
|  | 253 | memset(pos, 0x00, 4); | 
|  | 254 | pos += 4; | 
|  | 255 |  | 
|  | 256 | /* Mesh capability */ | 
|  | 257 | sdata->u.sta.accepting_plinks = mesh_plink_availables(sdata); | 
|  | 258 | *pos++ = sdata->u.sta.accepting_plinks ? ACCEPT_PLINKS : 0x00; | 
|  | 259 | *pos++ = 0x00; | 
|  | 260 |  | 
|  | 261 | return; | 
|  | 262 | } | 
|  | 263 |  | 
|  | 264 | u32 mesh_table_hash(u8 *addr, struct net_device *dev, struct mesh_table *tbl) | 
|  | 265 | { | 
|  | 266 | /* Use last four bytes of hw addr and interface index as hash index */ | 
|  | 267 | return jhash_2words(*(u32 *)(addr+2), dev->ifindex, tbl->hash_rnd) | 
|  | 268 | & tbl->hash_mask; | 
|  | 269 | } | 
|  | 270 |  | 
|  | 271 | u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len) | 
|  | 272 | { | 
|  | 273 | if (!mesh_id_len) | 
|  | 274 | return 1; | 
|  | 275 | else if (mesh_id_len == 1) | 
|  | 276 | return (u8) mesh_id[0]; | 
|  | 277 | else | 
|  | 278 | return (u8) (mesh_id[0] + 2 * mesh_id[1]); | 
|  | 279 | } | 
|  | 280 |  | 
|  | 281 | struct mesh_table *mesh_table_alloc(int size_order) | 
|  | 282 | { | 
|  | 283 | int i; | 
|  | 284 | struct mesh_table *newtbl; | 
|  | 285 |  | 
|  | 286 | newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL); | 
|  | 287 | if (!newtbl) | 
|  | 288 | return NULL; | 
|  | 289 |  | 
|  | 290 | newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) * | 
|  | 291 | (1 << size_order), GFP_KERNEL); | 
|  | 292 |  | 
|  | 293 | if (!newtbl->hash_buckets) { | 
|  | 294 | kfree(newtbl); | 
|  | 295 | return NULL; | 
|  | 296 | } | 
|  | 297 |  | 
|  | 298 | newtbl->hashwlock = kmalloc(sizeof(spinlock_t) * | 
|  | 299 | (1 << size_order), GFP_KERNEL); | 
|  | 300 | if (!newtbl->hashwlock) { | 
|  | 301 | kfree(newtbl->hash_buckets); | 
|  | 302 | kfree(newtbl); | 
|  | 303 | return NULL; | 
|  | 304 | } | 
|  | 305 |  | 
|  | 306 | newtbl->size_order = size_order; | 
|  | 307 | newtbl->hash_mask = (1 << size_order) - 1; | 
|  | 308 | atomic_set(&newtbl->entries,  0); | 
|  | 309 | get_random_bytes(&newtbl->hash_rnd, | 
|  | 310 | sizeof(newtbl->hash_rnd)); | 
|  | 311 | for (i = 0; i <= newtbl->hash_mask; i++) | 
|  | 312 | spin_lock_init(&newtbl->hashwlock[i]); | 
|  | 313 |  | 
|  | 314 | return newtbl; | 
|  | 315 | } | 
|  | 316 |  | 
|  | 317 | void mesh_table_free(struct mesh_table *tbl, bool free_leafs) | 
|  | 318 | { | 
|  | 319 | struct hlist_head *mesh_hash; | 
|  | 320 | struct hlist_node *p, *q; | 
|  | 321 | int i; | 
|  | 322 |  | 
|  | 323 | mesh_hash = tbl->hash_buckets; | 
|  | 324 | for (i = 0; i <= tbl->hash_mask; i++) { | 
|  | 325 | spin_lock(&tbl->hashwlock[i]); | 
|  | 326 | hlist_for_each_safe(p, q, &mesh_hash[i]) { | 
|  | 327 | tbl->free_node(p, free_leafs); | 
|  | 328 | atomic_dec(&tbl->entries); | 
|  | 329 | } | 
|  | 330 | spin_unlock(&tbl->hashwlock[i]); | 
|  | 331 | } | 
|  | 332 | kfree(tbl->hash_buckets); | 
|  | 333 | kfree(tbl->hashwlock); | 
|  | 334 | kfree(tbl); | 
|  | 335 | } | 
|  | 336 |  | 
|  | 337 | static void ieee80211_mesh_path_timer(unsigned long data) | 
|  | 338 | { | 
|  | 339 | struct ieee80211_sub_if_data *sdata = | 
|  | 340 | (struct ieee80211_sub_if_data *) data; | 
|  | 341 | struct ieee80211_if_sta *ifsta = &sdata->u.sta; | 
|  | 342 | struct ieee80211_local *local = wdev_priv(&sdata->wdev); | 
|  | 343 |  | 
|  | 344 | queue_work(local->hw.workqueue, &ifsta->work); | 
|  | 345 | } | 
|  | 346 |  | 
|  | 347 | struct mesh_table *mesh_table_grow(struct mesh_table *tbl) | 
|  | 348 | { | 
|  | 349 | struct mesh_table *newtbl; | 
|  | 350 | struct hlist_head *oldhash; | 
|  | 351 | struct hlist_node *p; | 
|  | 352 | int err = 0; | 
|  | 353 | int i; | 
|  | 354 |  | 
|  | 355 | if (atomic_read(&tbl->entries) | 
|  | 356 | < tbl->mean_chain_len * (tbl->hash_mask + 1)) { | 
|  | 357 | err = -EPERM; | 
|  | 358 | goto endgrow; | 
|  | 359 | } | 
|  | 360 |  | 
|  | 361 | newtbl = mesh_table_alloc(tbl->size_order + 1); | 
|  | 362 | if (!newtbl) { | 
|  | 363 | err = -ENOMEM; | 
|  | 364 | goto endgrow; | 
|  | 365 | } | 
|  | 366 |  | 
|  | 367 | newtbl->free_node = tbl->free_node; | 
|  | 368 | newtbl->mean_chain_len = tbl->mean_chain_len; | 
|  | 369 | newtbl->copy_node = tbl->copy_node; | 
|  | 370 | atomic_set(&newtbl->entries, atomic_read(&tbl->entries)); | 
|  | 371 |  | 
|  | 372 | oldhash = tbl->hash_buckets; | 
|  | 373 | for (i = 0; i <= tbl->hash_mask; i++) | 
|  | 374 | hlist_for_each(p, &oldhash[i]) | 
|  | 375 | tbl->copy_node(p, newtbl); | 
|  | 376 |  | 
|  | 377 | endgrow: | 
|  | 378 | if (err) | 
|  | 379 | return NULL; | 
|  | 380 | else | 
|  | 381 | return newtbl; | 
|  | 382 | } | 
| Johannes Berg | 902acc7 | 2008-02-23 15:17:19 +0100 | [diff] [blame] | 383 |  | 
|  | 384 | /** | 
|  | 385 | * ieee80211_new_mesh_header - create a new mesh header | 
|  | 386 | * @meshhdr:    uninitialized mesh header | 
|  | 387 | * @sdata:	mesh interface to be used | 
|  | 388 | * | 
|  | 389 | * Return the header length. | 
|  | 390 | */ | 
|  | 391 | int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr, | 
|  | 392 | struct ieee80211_sub_if_data *sdata) | 
|  | 393 | { | 
|  | 394 | meshhdr->flags = 0; | 
|  | 395 | meshhdr->ttl = sdata->u.sta.mshcfg.dot11MeshTTL; | 
|  | 396 |  | 
|  | 397 | meshhdr->seqnum[0] = sdata->u.sta.mesh_seqnum[0]++; | 
|  | 398 | meshhdr->seqnum[1] = sdata->u.sta.mesh_seqnum[1]; | 
|  | 399 | meshhdr->seqnum[2] = sdata->u.sta.mesh_seqnum[2]; | 
|  | 400 |  | 
|  | 401 | if (sdata->u.sta.mesh_seqnum[0] == 0) { | 
|  | 402 | sdata->u.sta.mesh_seqnum[1]++; | 
|  | 403 | if (sdata->u.sta.mesh_seqnum[1] == 0) | 
|  | 404 | sdata->u.sta.mesh_seqnum[2]++; | 
|  | 405 | } | 
|  | 406 |  | 
|  | 407 | return 5; | 
|  | 408 | } | 
|  | 409 |  | 
|  | 410 | void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | 411 | { | 
|  | 412 | struct ieee80211_if_sta *ifsta = &sdata->u.sta; | 
|  | 413 |  | 
|  | 414 | ifsta->mshcfg.dot11MeshRetryTimeout = MESH_RET_T; | 
|  | 415 | ifsta->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T; | 
|  | 416 | ifsta->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T; | 
|  | 417 | ifsta->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR; | 
|  | 418 | ifsta->mshcfg.dot11MeshTTL = MESH_TTL; | 
|  | 419 | ifsta->mshcfg.auto_open_plinks = true; | 
|  | 420 | ifsta->mshcfg.dot11MeshMaxPeerLinks = | 
|  | 421 | MESH_MAX_ESTAB_PLINKS; | 
|  | 422 | ifsta->mshcfg.dot11MeshHWMPactivePathTimeout = | 
|  | 423 | MESH_PATH_TIMEOUT; | 
|  | 424 | ifsta->mshcfg.dot11MeshHWMPpreqMinInterval = | 
|  | 425 | MESH_PREQ_MIN_INT; | 
|  | 426 | ifsta->mshcfg.dot11MeshHWMPnetDiameterTraversalTime = | 
|  | 427 | MESH_DIAM_TRAVERSAL_TIME; | 
|  | 428 | ifsta->mshcfg.dot11MeshHWMPmaxPREQretries = | 
|  | 429 | MESH_MAX_PREQ_RETRIES; | 
|  | 430 | ifsta->mshcfg.path_refresh_time = | 
|  | 431 | MESH_PATH_REFRESH_TIME; | 
|  | 432 | ifsta->mshcfg.min_discovery_timeout = | 
|  | 433 | MESH_MIN_DISCOVERY_TIMEOUT; | 
|  | 434 | ifsta->accepting_plinks = true; | 
|  | 435 | ifsta->preq_id = 0; | 
|  | 436 | ifsta->dsn = 0; | 
|  | 437 | atomic_set(&ifsta->mpaths, 0); | 
|  | 438 | mesh_rmc_init(sdata->dev); | 
|  | 439 | ifsta->last_preq = jiffies; | 
|  | 440 | /* Allocate all mesh structures when creating the first mesh interface. */ | 
|  | 441 | if (!mesh_allocated) | 
|  | 442 | ieee80211s_init(); | 
|  | 443 | mesh_ids_set_default(ifsta); | 
|  | 444 | setup_timer(&ifsta->mesh_path_timer, | 
|  | 445 | ieee80211_mesh_path_timer, | 
|  | 446 | (unsigned long) sdata); | 
|  | 447 | INIT_LIST_HEAD(&ifsta->preq_queue.list); | 
|  | 448 | spin_lock_init(&ifsta->mesh_preq_queue_lock); | 
|  | 449 | } |