| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | *** The StrongARM version of the CerfBoard/Cube has been discontinued *** |
| 2 | |
| 3 | The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board |
| 4 | that measures approximately 2" square. It includes an Ethernet |
| 5 | controller, an RS232-compatible serial port, a USB function port, and |
| 6 | one CompactFlash+ slot on the back. Pictures can be found at the |
| 7 | Intrinsyc website, http://www.intrinsyc.com. |
| 8 | |
| 9 | This document describes the support in the Linux kernel for the |
| 10 | Intrinsyc CerfBoard. |
| 11 | |
| 12 | Supported in this version: |
| 13 | - CompactFlash+ slot (select PCMCIA in General Setup and any options |
| 14 | that may be required) |
| 15 | - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in |
| 16 | Network Devices) |
| 17 | - Serial ports with a serial console (hardcoded to 38400 8N1) |
| 18 | |
| 19 | In order to get this kernel onto your Cerf, you need a server that runs |
| 20 | both BOOTP and TFTP. Detailed instructions should have come with your |
| 21 | evaluation kit on how to use the bootloader. This series of commands |
| 22 | will suffice: |
| 23 | |
| 24 | make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig |
| 25 | make ARCH=arm CROSS_COMPILE=arm-linux- zImage |
| 26 | make ARCH=arm CROSS_COMPILE=arm-linux- modules |
| 27 | cp arch/arm/boot/zImage <TFTP directory> |
| 28 | |
| 29 | support@intrinsyc.com |