| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 1 | /* | 
|  | 2 | * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver | 
|  | 3 | * | 
|  | 4 | * Written by: Grant Likely <grant.likely@secretlab.ca> | 
|  | 5 | * | 
|  | 6 | * Copyright (C) 2007 Secret Lab Technologies Ltd. | 
|  | 7 | * | 
|  | 8 | * This program is free software; you can redistribute it and/or modify | 
|  | 9 | * it under the terms of the GNU General Public License version 2 as | 
|  | 10 | * published by the Free Software Foundation. | 
|  | 11 | */ | 
|  | 12 |  | 
|  | 13 | /* | 
|  | 14 | * The DS1682 elapsed timer recorder is a simple device that implements | 
|  | 15 | * one elapsed time counter, one event counter, an alarm signal and 10 | 
|  | 16 | * bytes of general purpose EEPROM. | 
|  | 17 | * | 
|  | 18 | * This driver provides access to the DS1682 counters and user data via | 
|  | 19 | * the sysfs.  The following attributes are added to the device node: | 
|  | 20 | *     elapsed_time (u32): Total elapsed event time in ms resolution | 
|  | 21 | *     alarm_time (u32): When elapsed time exceeds the value in alarm_time, | 
|  | 22 | *                       then the alarm pin is asserted. | 
|  | 23 | *     event_count (u16): number of times the event pin has gone low. | 
|  | 24 | *     eeprom (u8[10]): general purpose EEPROM | 
|  | 25 | * | 
|  | 26 | * Counter registers and user data are both read/write unless the device | 
|  | 27 | * has been write protected.  This driver does not support turning off write | 
|  | 28 | * protection.  Once write protection is turned on, it is impossible to | 
|  | 29 | * turn it off again, so I have left the feature out of this driver to avoid | 
|  | 30 | * accidental enabling, but it is trivial to add write protect support. | 
|  | 31 | * | 
|  | 32 | */ | 
|  | 33 |  | 
|  | 34 | #include <linux/module.h> | 
|  | 35 | #include <linux/init.h> | 
|  | 36 | #include <linux/slab.h> | 
|  | 37 | #include <linux/i2c.h> | 
|  | 38 | #include <linux/string.h> | 
|  | 39 | #include <linux/list.h> | 
|  | 40 | #include <linux/sysfs.h> | 
|  | 41 | #include <linux/ctype.h> | 
|  | 42 | #include <linux/hwmon-sysfs.h> | 
|  | 43 |  | 
|  | 44 | /* Device registers */ | 
|  | 45 | #define DS1682_REG_CONFIG		0x00 | 
|  | 46 | #define DS1682_REG_ALARM		0x01 | 
|  | 47 | #define DS1682_REG_ELAPSED		0x05 | 
|  | 48 | #define DS1682_REG_EVT_CNTR		0x09 | 
|  | 49 | #define DS1682_REG_EEPROM		0x0b | 
|  | 50 | #define DS1682_REG_RESET		0x1d | 
|  | 51 | #define DS1682_REG_WRITE_DISABLE	0x1e | 
|  | 52 | #define DS1682_REG_WRITE_MEM_DISABLE	0x1f | 
|  | 53 |  | 
|  | 54 | #define DS1682_EEPROM_SIZE		10 | 
|  | 55 |  | 
|  | 56 | /* | 
|  | 57 | * Generic counter attributes | 
|  | 58 | */ | 
|  | 59 | static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr, | 
|  | 60 | char *buf) | 
|  | 61 | { | 
|  | 62 | struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); | 
|  | 63 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 64 | __le32 val = 0; | 
|  | 65 | int rc; | 
|  | 66 |  | 
|  | 67 | dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name); | 
|  | 68 |  | 
|  | 69 | /* Read the register */ | 
|  | 70 | rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr, | 
|  | 71 | (u8 *) & val); | 
|  | 72 | if (rc < 0) | 
|  | 73 | return -EIO; | 
|  | 74 |  | 
|  | 75 | /* Special case: the 32 bit regs are time values with 1/4s | 
|  | 76 | * resolution, scale them up to milliseconds */ | 
|  | 77 | if (sattr->nr == 4) | 
| Andrew Morton | f52e0ef | 2007-07-26 10:41:09 -0700 | [diff] [blame] | 78 | return sprintf(buf, "%llu\n", | 
|  | 79 | ((unsigned long long)le32_to_cpu(val)) * 250); | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 80 |  | 
|  | 81 | /* Format the output string and return # of bytes */ | 
|  | 82 | return sprintf(buf, "%li\n", (long)le32_to_cpu(val)); | 
|  | 83 | } | 
|  | 84 |  | 
|  | 85 | static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr, | 
|  | 86 | const char *buf, size_t count) | 
|  | 87 | { | 
|  | 88 | struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); | 
|  | 89 | struct i2c_client *client = to_i2c_client(dev); | 
|  | 90 | char *endp; | 
|  | 91 | u64 val; | 
|  | 92 | __le32 val_le; | 
|  | 93 | int rc; | 
|  | 94 |  | 
|  | 95 | dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name); | 
|  | 96 |  | 
|  | 97 | /* Decode input */ | 
|  | 98 | val = simple_strtoull(buf, &endp, 0); | 
|  | 99 | if (buf == endp) { | 
|  | 100 | dev_dbg(dev, "input string not a number\n"); | 
|  | 101 | return -EINVAL; | 
|  | 102 | } | 
|  | 103 |  | 
|  | 104 | /* Special case: the 32 bit regs are time values with 1/4s | 
|  | 105 | * resolution, scale input down to quarter-seconds */ | 
|  | 106 | if (sattr->nr == 4) | 
|  | 107 | do_div(val, 250); | 
|  | 108 |  | 
|  | 109 | /* write out the value */ | 
|  | 110 | val_le = cpu_to_le32(val); | 
|  | 111 | rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr, | 
|  | 112 | (u8 *) & val_le); | 
|  | 113 | if (rc < 0) { | 
|  | 114 | dev_err(dev, "register write failed; reg=0x%x, size=%i\n", | 
|  | 115 | sattr->index, sattr->nr); | 
|  | 116 | return -EIO; | 
|  | 117 | } | 
|  | 118 |  | 
|  | 119 | return count; | 
|  | 120 | } | 
|  | 121 |  | 
|  | 122 | /* | 
|  | 123 | * Simple register attributes | 
|  | 124 | */ | 
|  | 125 | static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | 126 | ds1682_store, 4, DS1682_REG_ELAPSED); | 
|  | 127 | static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | 128 | ds1682_store, 4, DS1682_REG_ALARM); | 
|  | 129 | static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, | 
|  | 130 | ds1682_store, 2, DS1682_REG_EVT_CNTR); | 
|  | 131 |  | 
|  | 132 | static const struct attribute_group ds1682_group = { | 
|  | 133 | .attrs = (struct attribute *[]) { | 
|  | 134 | &sensor_dev_attr_elapsed_time.dev_attr.attr, | 
|  | 135 | &sensor_dev_attr_alarm_time.dev_attr.attr, | 
|  | 136 | &sensor_dev_attr_event_count.dev_attr.attr, | 
|  | 137 | NULL, | 
|  | 138 | }, | 
|  | 139 | }; | 
|  | 140 |  | 
|  | 141 | /* | 
|  | 142 | * User data attribute | 
|  | 143 | */ | 
| Al Viro | 05bd711 | 2007-07-15 21:01:22 +0100 | [diff] [blame] | 144 | static ssize_t ds1682_eeprom_read(struct kobject *kobj, struct bin_attribute *attr, | 
|  | 145 | char *buf, loff_t off, size_t count) | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 146 | { | 
|  | 147 | struct i2c_client *client = kobj_to_i2c_client(kobj); | 
|  | 148 | int rc; | 
|  | 149 |  | 
|  | 150 | dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n", | 
|  | 151 | buf, off, count); | 
|  | 152 |  | 
|  | 153 | if (off >= DS1682_EEPROM_SIZE) | 
|  | 154 | return 0; | 
|  | 155 |  | 
|  | 156 | if (off + count > DS1682_EEPROM_SIZE) | 
|  | 157 | count = DS1682_EEPROM_SIZE - off; | 
|  | 158 |  | 
|  | 159 | rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off, | 
|  | 160 | count, buf); | 
|  | 161 | if (rc < 0) | 
|  | 162 | return -EIO; | 
|  | 163 |  | 
|  | 164 | return count; | 
|  | 165 | } | 
|  | 166 |  | 
| Al Viro | 05bd711 | 2007-07-15 21:01:22 +0100 | [diff] [blame] | 167 | static ssize_t ds1682_eeprom_write(struct kobject *kobj, struct bin_attribute *attr, | 
|  | 168 | char *buf, loff_t off, size_t count) | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 169 | { | 
|  | 170 | struct i2c_client *client = kobj_to_i2c_client(kobj); | 
|  | 171 |  | 
|  | 172 | dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n", | 
|  | 173 | buf, off, count); | 
|  | 174 |  | 
|  | 175 | if (off >= DS1682_EEPROM_SIZE) | 
|  | 176 | return -ENOSPC; | 
|  | 177 |  | 
|  | 178 | if (off + count > DS1682_EEPROM_SIZE) | 
|  | 179 | count = DS1682_EEPROM_SIZE - off; | 
|  | 180 |  | 
|  | 181 | /* Write out to the device */ | 
|  | 182 | if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off, | 
|  | 183 | count, buf) < 0) | 
|  | 184 | return -EIO; | 
|  | 185 |  | 
|  | 186 | return count; | 
|  | 187 | } | 
|  | 188 |  | 
|  | 189 | static struct bin_attribute ds1682_eeprom_attr = { | 
|  | 190 | .attr = { | 
|  | 191 | .name = "eeprom", | 
|  | 192 | .mode = S_IRUGO | S_IWUSR, | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 193 | }, | 
|  | 194 | .size = DS1682_EEPROM_SIZE, | 
|  | 195 | .read = ds1682_eeprom_read, | 
|  | 196 | .write = ds1682_eeprom_write, | 
|  | 197 | }; | 
|  | 198 |  | 
|  | 199 | /* | 
|  | 200 | * Called when a ds1682 device is matched with this driver | 
|  | 201 | */ | 
| Jean Delvare | d2653e9 | 2008-04-29 23:11:39 +0200 | [diff] [blame] | 202 | static int ds1682_probe(struct i2c_client *client, | 
|  | 203 | const struct i2c_device_id *id) | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 204 | { | 
|  | 205 | int rc; | 
|  | 206 |  | 
|  | 207 | if (!i2c_check_functionality(client->adapter, | 
|  | 208 | I2C_FUNC_SMBUS_I2C_BLOCK)) { | 
|  | 209 | dev_err(&client->dev, "i2c bus does not support the ds1682\n"); | 
|  | 210 | rc = -ENODEV; | 
|  | 211 | goto exit; | 
|  | 212 | } | 
|  | 213 |  | 
|  | 214 | rc = sysfs_create_group(&client->dev.kobj, &ds1682_group); | 
|  | 215 | if (rc) | 
|  | 216 | goto exit; | 
|  | 217 |  | 
|  | 218 | rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); | 
|  | 219 | if (rc) | 
|  | 220 | goto exit_bin_attr; | 
|  | 221 |  | 
|  | 222 | return 0; | 
|  | 223 |  | 
|  | 224 | exit_bin_attr: | 
|  | 225 | sysfs_remove_group(&client->dev.kobj, &ds1682_group); | 
|  | 226 | exit: | 
|  | 227 | return rc; | 
|  | 228 | } | 
|  | 229 |  | 
|  | 230 | static int ds1682_remove(struct i2c_client *client) | 
|  | 231 | { | 
|  | 232 | sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr); | 
|  | 233 | sysfs_remove_group(&client->dev.kobj, &ds1682_group); | 
|  | 234 | return 0; | 
|  | 235 | } | 
|  | 236 |  | 
| Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 237 | static const struct i2c_device_id ds1682_id[] = { | 
|  | 238 | { "ds1682", 0 }, | 
|  | 239 | { } | 
|  | 240 | }; | 
|  | 241 | MODULE_DEVICE_TABLE(i2c, ds1682_id); | 
|  | 242 |  | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 243 | static struct i2c_driver ds1682_driver = { | 
|  | 244 | .driver = { | 
|  | 245 | .name = "ds1682", | 
|  | 246 | }, | 
|  | 247 | .probe = ds1682_probe, | 
|  | 248 | .remove = ds1682_remove, | 
| Jean Delvare | 3760f73 | 2008-04-29 23:11:40 +0200 | [diff] [blame] | 249 | .id_table = ds1682_id, | 
| Grant Likely | 5162b75 | 2007-07-12 14:12:29 +0200 | [diff] [blame] | 250 | }; | 
|  | 251 |  | 
|  | 252 | static int __init ds1682_init(void) | 
|  | 253 | { | 
|  | 254 | return i2c_add_driver(&ds1682_driver); | 
|  | 255 | } | 
|  | 256 |  | 
|  | 257 | static void __exit ds1682_exit(void) | 
|  | 258 | { | 
|  | 259 | i2c_del_driver(&ds1682_driver); | 
|  | 260 | } | 
|  | 261 |  | 
|  | 262 | MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); | 
|  | 263 | MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver"); | 
|  | 264 | MODULE_LICENSE("GPL"); | 
|  | 265 |  | 
|  | 266 | module_init(ds1682_init); | 
|  | 267 | module_exit(ds1682_exit); |