| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | Documentation for the ESS1868F AudioDrive PnP sound card | 
|  | 2 |  | 
|  | 3 | The ESS1868 sound card is a PnP ESS1688-compatible 16-bit sound card. | 
|  | 4 |  | 
|  | 5 | It should be automatically detected by the Linux Kernel isapnp support when you | 
|  | 6 | load the sb.o module. Otherwise you should take care of: | 
|  | 7 |  | 
|  | 8 | *  The ESS1868 does not allow use of a 16-bit DMA, thus DMA 0, 1, 2, and 3 | 
|  | 9 | may only be used. | 
|  | 10 |  | 
|  | 11 | *  isapnptools version 1.14 does work with ESS1868.  Earlier versions might | 
|  | 12 | not. | 
|  | 13 |  | 
|  | 14 | *  Sound support MUST be compiled as MODULES, not statically linked | 
|  | 15 | into the kernel. | 
|  | 16 |  | 
|  | 17 |  | 
|  | 18 | NOTE: this is only needed when not using the kernel isapnp support! | 
|  | 19 |  | 
|  | 20 | For configuring the sound card's I/O addresses, IRQ and DMA, here is a | 
|  | 21 | sample copy of the isapnp.conf directives regarding the ESS1868: | 
|  | 22 |  | 
|  | 23 | (CONFIGURE ESS1868/-1 (LD 1 | 
|  | 24 | (IO 0 (BASE 0x0220)) | 
|  | 25 | (IO 1 (BASE 0x0388)) | 
|  | 26 | (IO 2 (BASE 0x0330)) | 
|  | 27 | (DMA 0 (CHANNEL 1)) | 
|  | 28 | (INT 0 (IRQ 5 (MODE +E))) | 
|  | 29 | (ACT Y) | 
|  | 30 | )) | 
|  | 31 |  | 
|  | 32 | (for a full working isapnp.conf file, remember the | 
|  | 33 | (ISOLATE) | 
|  | 34 | (IDENTIFY *) | 
|  | 35 | at the beginning and the | 
|  | 36 | (WAITFORKEY) | 
|  | 37 | at the end.) | 
|  | 38 |  | 
|  | 39 | In this setup, the main card I/O is 0x0220, FM synthesizer is 0x0388, and | 
|  | 40 | the MPU-401 MIDI port is located at 0x0330.  IRQ is IRQ 5, DMA is channel 1. | 
|  | 41 |  | 
|  | 42 | After configuring the sound card via isapnp, to use the card you must load | 
|  | 43 | the sound modules with the proper I/O information.  Here is my setup: | 
|  | 44 |  | 
|  | 45 | # ESS1868F AudioDrive initialization | 
|  | 46 |  | 
|  | 47 | /sbin/modprobe sound | 
|  | 48 | /sbin/insmod uart401 | 
|  | 49 | /sbin/insmod sb io=0x220 irq=5 dma=1 dma16=-1 | 
|  | 50 | /sbin/insmod mpu401 io=0x330 | 
|  | 51 | /sbin/insmod opl3 io=0x388 | 
|  | 52 | /sbin/insmod v_midi | 
|  | 53 |  | 
|  | 54 | opl3 is the FM synthesizer | 
|  | 55 | /sbin/insmod opl3 io=0x388 |