| Hitoshi Mitake | df8bc08 | 2008-10-29 14:00:50 -0700 | [diff] [blame] | 1 | /* | 
|  | 2 | * Intel X38 Memory Controller kernel module | 
|  | 3 | * Copyright (C) 2008 Cluster Computing, Inc. | 
|  | 4 | * | 
|  | 5 | * This file may be distributed under the terms of the | 
|  | 6 | * GNU General Public License. | 
|  | 7 | * | 
|  | 8 | * This file is based on i3200_edac.c | 
|  | 9 | * | 
|  | 10 | */ | 
|  | 11 |  | 
|  | 12 | #include <linux/module.h> | 
|  | 13 | #include <linux/init.h> | 
|  | 14 | #include <linux/pci.h> | 
|  | 15 | #include <linux/pci_ids.h> | 
|  | 16 | #include <linux/slab.h> | 
|  | 17 | #include <linux/edac.h> | 
|  | 18 | #include "edac_core.h" | 
|  | 19 |  | 
|  | 20 | #define X38_REVISION		"1.1" | 
|  | 21 |  | 
|  | 22 | #define EDAC_MOD_STR		"x38_edac" | 
|  | 23 |  | 
|  | 24 | #define PCI_DEVICE_ID_INTEL_X38_HB	0x29e0 | 
|  | 25 |  | 
|  | 26 | #define X38_RANKS		8 | 
|  | 27 | #define X38_RANKS_PER_CHANNEL	4 | 
|  | 28 | #define X38_CHANNELS		2 | 
|  | 29 |  | 
|  | 30 | /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */ | 
|  | 31 |  | 
|  | 32 | #define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */ | 
|  | 33 | #define X38_MCHBAR_HIGH	0x4b | 
|  | 34 | #define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */ | 
|  | 35 | #define X38_MMR_WINDOW_SIZE	16384 | 
|  | 36 |  | 
|  | 37 | #define X38_TOM	0xa0	/* Top of Memory (16b) | 
|  | 38 | * | 
|  | 39 | * 15:10 reserved | 
|  | 40 | *  9:0  total populated physical memory | 
|  | 41 | */ | 
|  | 42 | #define X38_TOM_MASK	0x3ff	/* bits 9:0 */ | 
|  | 43 | #define X38_TOM_SHIFT 26	/* 64MiB grain */ | 
|  | 44 |  | 
|  | 45 | #define X38_ERRSTS	0xc8	/* Error Status Register (16b) | 
|  | 46 | * | 
|  | 47 | * 15    reserved | 
|  | 48 | * 14    Isochronous TBWRR Run Behind FIFO Full | 
|  | 49 | *       (ITCV) | 
|  | 50 | * 13    Isochronous TBWRR Run Behind FIFO Put | 
|  | 51 | *       (ITSTV) | 
|  | 52 | * 12    reserved | 
|  | 53 | * 11    MCH Thermal Sensor Event | 
|  | 54 | *       for SMI/SCI/SERR (GTSE) | 
|  | 55 | * 10    reserved | 
|  | 56 | *  9    LOCK to non-DRAM Memory Flag (LCKF) | 
|  | 57 | *  8    reserved | 
|  | 58 | *  7    DRAM Throttle Flag (DTF) | 
|  | 59 | *  6:2  reserved | 
|  | 60 | *  1    Multi-bit DRAM ECC Error Flag (DMERR) | 
|  | 61 | *  0    Single-bit DRAM ECC Error Flag (DSERR) | 
|  | 62 | */ | 
|  | 63 | #define X38_ERRSTS_UE		0x0002 | 
|  | 64 | #define X38_ERRSTS_CE		0x0001 | 
|  | 65 | #define X38_ERRSTS_BITS	(X38_ERRSTS_UE | X38_ERRSTS_CE) | 
|  | 66 |  | 
|  | 67 |  | 
|  | 68 | /* Intel  MMIO register space - device 0 function 0 - MMR space */ | 
|  | 69 |  | 
|  | 70 | #define X38_C0DRB	0x200	/* Channel 0 DRAM Rank Boundary (16b x 4) | 
|  | 71 | * | 
|  | 72 | * 15:10 reserved | 
|  | 73 | *  9:0  Channel 0 DRAM Rank Boundary Address | 
|  | 74 | */ | 
|  | 75 | #define X38_C1DRB	0x600	/* Channel 1 DRAM Rank Boundary (16b x 4) */ | 
|  | 76 | #define X38_DRB_MASK	0x3ff	/* bits 9:0 */ | 
|  | 77 | #define X38_DRB_SHIFT 26	/* 64MiB grain */ | 
|  | 78 |  | 
|  | 79 | #define X38_C0ECCERRLOG 0x280	/* Channel 0 ECC Error Log (64b) | 
|  | 80 | * | 
|  | 81 | * 63:48 Error Column Address (ERRCOL) | 
|  | 82 | * 47:32 Error Row Address (ERRROW) | 
|  | 83 | * 31:29 Error Bank Address (ERRBANK) | 
|  | 84 | * 28:27 Error Rank Address (ERRRANK) | 
|  | 85 | * 26:24 reserved | 
|  | 86 | * 23:16 Error Syndrome (ERRSYND) | 
|  | 87 | * 15: 2 reserved | 
|  | 88 | *    1  Multiple Bit Error Status (MERRSTS) | 
|  | 89 | *    0  Correctable Error Status (CERRSTS) | 
|  | 90 | */ | 
|  | 91 | #define X38_C1ECCERRLOG 0x680	/* Channel 1 ECC Error Log (64b) */ | 
|  | 92 | #define X38_ECCERRLOG_CE	0x1 | 
|  | 93 | #define X38_ECCERRLOG_UE	0x2 | 
|  | 94 | #define X38_ECCERRLOG_RANK_BITS	0x18000000 | 
|  | 95 | #define X38_ECCERRLOG_SYNDROME_BITS	0xff0000 | 
|  | 96 |  | 
|  | 97 | #define X38_CAPID0 0xe0	/* see P.94 of spec for details */ | 
|  | 98 |  | 
|  | 99 | static int x38_channel_num; | 
|  | 100 |  | 
|  | 101 | static int how_many_channel(struct pci_dev *pdev) | 
|  | 102 | { | 
|  | 103 | unsigned char capid0_8b; /* 8th byte of CAPID0 */ | 
|  | 104 |  | 
|  | 105 | pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b); | 
|  | 106 | if (capid0_8b & 0x20) {	/* check DCD: Dual Channel Disable */ | 
|  | 107 | debugf0("In single channel mode.\n"); | 
|  | 108 | x38_channel_num = 1; | 
|  | 109 | } else { | 
|  | 110 | debugf0("In dual channel mode.\n"); | 
|  | 111 | x38_channel_num = 2; | 
|  | 112 | } | 
|  | 113 |  | 
|  | 114 | return x38_channel_num; | 
|  | 115 | } | 
|  | 116 |  | 
|  | 117 | static unsigned long eccerrlog_syndrome(u64 log) | 
|  | 118 | { | 
|  | 119 | return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16; | 
|  | 120 | } | 
|  | 121 |  | 
|  | 122 | static int eccerrlog_row(int channel, u64 log) | 
|  | 123 | { | 
|  | 124 | return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) | | 
|  | 125 | (channel * X38_RANKS_PER_CHANNEL); | 
|  | 126 | } | 
|  | 127 |  | 
|  | 128 | enum x38_chips { | 
|  | 129 | X38 = 0, | 
|  | 130 | }; | 
|  | 131 |  | 
|  | 132 | struct x38_dev_info { | 
|  | 133 | const char *ctl_name; | 
|  | 134 | }; | 
|  | 135 |  | 
|  | 136 | struct x38_error_info { | 
|  | 137 | u16 errsts; | 
|  | 138 | u16 errsts2; | 
|  | 139 | u64 eccerrlog[X38_CHANNELS]; | 
|  | 140 | }; | 
|  | 141 |  | 
|  | 142 | static const struct x38_dev_info x38_devs[] = { | 
|  | 143 | [X38] = { | 
|  | 144 | .ctl_name = "x38"}, | 
|  | 145 | }; | 
|  | 146 |  | 
|  | 147 | static struct pci_dev *mci_pdev; | 
|  | 148 | static int x38_registered = 1; | 
|  | 149 |  | 
|  | 150 |  | 
|  | 151 | static void x38_clear_error_info(struct mem_ctl_info *mci) | 
|  | 152 | { | 
|  | 153 | struct pci_dev *pdev; | 
|  | 154 |  | 
|  | 155 | pdev = to_pci_dev(mci->dev); | 
|  | 156 |  | 
|  | 157 | /* | 
|  | 158 | * Clear any error bits. | 
|  | 159 | * (Yes, we really clear bits by writing 1 to them.) | 
|  | 160 | */ | 
|  | 161 | pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS, | 
|  | 162 | X38_ERRSTS_BITS); | 
|  | 163 | } | 
|  | 164 |  | 
|  | 165 | static u64 x38_readq(const void __iomem *addr) | 
|  | 166 | { | 
|  | 167 | return readl(addr) | (((u64)readl(addr + 4)) << 32); | 
|  | 168 | } | 
|  | 169 |  | 
|  | 170 | static void x38_get_and_clear_error_info(struct mem_ctl_info *mci, | 
|  | 171 | struct x38_error_info *info) | 
|  | 172 | { | 
|  | 173 | struct pci_dev *pdev; | 
|  | 174 | void __iomem *window = mci->pvt_info; | 
|  | 175 |  | 
|  | 176 | pdev = to_pci_dev(mci->dev); | 
|  | 177 |  | 
|  | 178 | /* | 
|  | 179 | * This is a mess because there is no atomic way to read all the | 
|  | 180 | * registers at once and the registers can transition from CE being | 
|  | 181 | * overwritten by UE. | 
|  | 182 | */ | 
|  | 183 | pci_read_config_word(pdev, X38_ERRSTS, &info->errsts); | 
|  | 184 | if (!(info->errsts & X38_ERRSTS_BITS)) | 
|  | 185 | return; | 
|  | 186 |  | 
|  | 187 | info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); | 
|  | 188 | if (x38_channel_num == 2) | 
|  | 189 | info->eccerrlog[1] = x38_readq(window + X38_C1ECCERRLOG); | 
|  | 190 |  | 
|  | 191 | pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2); | 
|  | 192 |  | 
|  | 193 | /* | 
|  | 194 | * If the error is the same for both reads then the first set | 
|  | 195 | * of reads is valid.  If there is a change then there is a CE | 
|  | 196 | * with no info and the second set of reads is valid and | 
|  | 197 | * should be UE info. | 
|  | 198 | */ | 
|  | 199 | if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { | 
|  | 200 | info->eccerrlog[0] = x38_readq(window + X38_C0ECCERRLOG); | 
|  | 201 | if (x38_channel_num == 2) | 
|  | 202 | info->eccerrlog[1] = | 
|  | 203 | x38_readq(window + X38_C1ECCERRLOG); | 
|  | 204 | } | 
|  | 205 |  | 
|  | 206 | x38_clear_error_info(mci); | 
|  | 207 | } | 
|  | 208 |  | 
|  | 209 | static void x38_process_error_info(struct mem_ctl_info *mci, | 
|  | 210 | struct x38_error_info *info) | 
|  | 211 | { | 
|  | 212 | int channel; | 
|  | 213 | u64 log; | 
|  | 214 |  | 
|  | 215 | if (!(info->errsts & X38_ERRSTS_BITS)) | 
|  | 216 | return; | 
|  | 217 |  | 
|  | 218 | if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { | 
|  | 219 | edac_mc_handle_ce_no_info(mci, "UE overwrote CE"); | 
|  | 220 | info->errsts = info->errsts2; | 
|  | 221 | } | 
|  | 222 |  | 
|  | 223 | for (channel = 0; channel < x38_channel_num; channel++) { | 
|  | 224 | log = info->eccerrlog[channel]; | 
|  | 225 | if (log & X38_ECCERRLOG_UE) { | 
|  | 226 | edac_mc_handle_ue(mci, 0, 0, | 
|  | 227 | eccerrlog_row(channel, log), "x38 UE"); | 
|  | 228 | } else if (log & X38_ECCERRLOG_CE) { | 
|  | 229 | edac_mc_handle_ce(mci, 0, 0, | 
|  | 230 | eccerrlog_syndrome(log), | 
|  | 231 | eccerrlog_row(channel, log), 0, "x38 CE"); | 
|  | 232 | } | 
|  | 233 | } | 
|  | 234 | } | 
|  | 235 |  | 
|  | 236 | static void x38_check(struct mem_ctl_info *mci) | 
|  | 237 | { | 
|  | 238 | struct x38_error_info info; | 
|  | 239 |  | 
|  | 240 | debugf1("MC%d: %s()\n", mci->mc_idx, __func__); | 
|  | 241 | x38_get_and_clear_error_info(mci, &info); | 
|  | 242 | x38_process_error_info(mci, &info); | 
|  | 243 | } | 
|  | 244 |  | 
|  | 245 |  | 
|  | 246 | void __iomem *x38_map_mchbar(struct pci_dev *pdev) | 
|  | 247 | { | 
|  | 248 | union { | 
|  | 249 | u64 mchbar; | 
|  | 250 | struct { | 
|  | 251 | u32 mchbar_low; | 
|  | 252 | u32 mchbar_high; | 
|  | 253 | }; | 
|  | 254 | } u; | 
|  | 255 | void __iomem *window; | 
|  | 256 |  | 
|  | 257 | pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low); | 
|  | 258 | pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1); | 
|  | 259 | pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high); | 
|  | 260 | u.mchbar &= X38_MCHBAR_MASK; | 
|  | 261 |  | 
|  | 262 | if (u.mchbar != (resource_size_t)u.mchbar) { | 
|  | 263 | printk(KERN_ERR | 
|  | 264 | "x38: mmio space beyond accessible range (0x%llx)\n", | 
|  | 265 | (unsigned long long)u.mchbar); | 
|  | 266 | return NULL; | 
|  | 267 | } | 
|  | 268 |  | 
|  | 269 | window = ioremap_nocache(u.mchbar, X38_MMR_WINDOW_SIZE); | 
|  | 270 | if (!window) | 
|  | 271 | printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n", | 
|  | 272 | (unsigned long long)u.mchbar); | 
|  | 273 |  | 
|  | 274 | return window; | 
|  | 275 | } | 
|  | 276 |  | 
|  | 277 |  | 
|  | 278 | static void x38_get_drbs(void __iomem *window, | 
|  | 279 | u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) | 
|  | 280 | { | 
|  | 281 | int i; | 
|  | 282 |  | 
|  | 283 | for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) { | 
|  | 284 | drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK; | 
|  | 285 | drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK; | 
|  | 286 | } | 
|  | 287 | } | 
|  | 288 |  | 
|  | 289 | static bool x38_is_stacked(struct pci_dev *pdev, | 
|  | 290 | u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) | 
|  | 291 | { | 
|  | 292 | u16 tom; | 
|  | 293 |  | 
|  | 294 | pci_read_config_word(pdev, X38_TOM, &tom); | 
|  | 295 | tom &= X38_TOM_MASK; | 
|  | 296 |  | 
|  | 297 | return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom; | 
|  | 298 | } | 
|  | 299 |  | 
|  | 300 | static unsigned long drb_to_nr_pages( | 
|  | 301 | u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL], | 
|  | 302 | bool stacked, int channel, int rank) | 
|  | 303 | { | 
|  | 304 | int n; | 
|  | 305 |  | 
|  | 306 | n = drbs[channel][rank]; | 
|  | 307 | if (rank > 0) | 
|  | 308 | n -= drbs[channel][rank - 1]; | 
|  | 309 | if (stacked && (channel == 1) && drbs[channel][rank] == | 
|  | 310 | drbs[channel][X38_RANKS_PER_CHANNEL - 1]) { | 
|  | 311 | n -= drbs[0][X38_RANKS_PER_CHANNEL - 1]; | 
|  | 312 | } | 
|  | 313 |  | 
|  | 314 | n <<= (X38_DRB_SHIFT - PAGE_SHIFT); | 
|  | 315 | return n; | 
|  | 316 | } | 
|  | 317 |  | 
|  | 318 | static int x38_probe1(struct pci_dev *pdev, int dev_idx) | 
|  | 319 | { | 
|  | 320 | int rc; | 
|  | 321 | int i; | 
|  | 322 | struct mem_ctl_info *mci = NULL; | 
|  | 323 | unsigned long last_page; | 
|  | 324 | u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]; | 
|  | 325 | bool stacked; | 
|  | 326 | void __iomem *window; | 
|  | 327 |  | 
|  | 328 | debugf0("MC: %s()\n", __func__); | 
|  | 329 |  | 
|  | 330 | window = x38_map_mchbar(pdev); | 
|  | 331 | if (!window) | 
|  | 332 | return -ENODEV; | 
|  | 333 |  | 
|  | 334 | x38_get_drbs(window, drbs); | 
|  | 335 |  | 
|  | 336 | how_many_channel(pdev); | 
|  | 337 |  | 
|  | 338 | /* FIXME: unconventional pvt_info usage */ | 
|  | 339 | mci = edac_mc_alloc(0, X38_RANKS, x38_channel_num, 0); | 
|  | 340 | if (!mci) | 
|  | 341 | return -ENOMEM; | 
|  | 342 |  | 
|  | 343 | debugf3("MC: %s(): init mci\n", __func__); | 
|  | 344 |  | 
|  | 345 | mci->dev = &pdev->dev; | 
|  | 346 | mci->mtype_cap = MEM_FLAG_DDR2; | 
|  | 347 |  | 
|  | 348 | mci->edac_ctl_cap = EDAC_FLAG_SECDED; | 
|  | 349 | mci->edac_cap = EDAC_FLAG_SECDED; | 
|  | 350 |  | 
|  | 351 | mci->mod_name = EDAC_MOD_STR; | 
|  | 352 | mci->mod_ver = X38_REVISION; | 
|  | 353 | mci->ctl_name = x38_devs[dev_idx].ctl_name; | 
|  | 354 | mci->dev_name = pci_name(pdev); | 
|  | 355 | mci->edac_check = x38_check; | 
|  | 356 | mci->ctl_page_to_phys = NULL; | 
|  | 357 | mci->pvt_info = window; | 
|  | 358 |  | 
|  | 359 | stacked = x38_is_stacked(pdev, drbs); | 
|  | 360 |  | 
|  | 361 | /* | 
|  | 362 | * The dram rank boundary (DRB) reg values are boundary addresses | 
|  | 363 | * for each DRAM rank with a granularity of 64MB.  DRB regs are | 
|  | 364 | * cumulative; the last one will contain the total memory | 
|  | 365 | * contained in all ranks. | 
|  | 366 | */ | 
|  | 367 | last_page = -1UL; | 
|  | 368 | for (i = 0; i < mci->nr_csrows; i++) { | 
|  | 369 | unsigned long nr_pages; | 
|  | 370 | struct csrow_info *csrow = &mci->csrows[i]; | 
|  | 371 |  | 
|  | 372 | nr_pages = drb_to_nr_pages(drbs, stacked, | 
|  | 373 | i / X38_RANKS_PER_CHANNEL, | 
|  | 374 | i % X38_RANKS_PER_CHANNEL); | 
|  | 375 |  | 
|  | 376 | if (nr_pages == 0) { | 
|  | 377 | csrow->mtype = MEM_EMPTY; | 
|  | 378 | continue; | 
|  | 379 | } | 
|  | 380 |  | 
|  | 381 | csrow->first_page = last_page + 1; | 
|  | 382 | last_page += nr_pages; | 
|  | 383 | csrow->last_page = last_page; | 
|  | 384 | csrow->nr_pages = nr_pages; | 
|  | 385 |  | 
|  | 386 | csrow->grain = nr_pages << PAGE_SHIFT; | 
|  | 387 | csrow->mtype = MEM_DDR2; | 
|  | 388 | csrow->dtype = DEV_UNKNOWN; | 
|  | 389 | csrow->edac_mode = EDAC_UNKNOWN; | 
|  | 390 | } | 
|  | 391 |  | 
|  | 392 | x38_clear_error_info(mci); | 
|  | 393 |  | 
|  | 394 | rc = -ENODEV; | 
|  | 395 | if (edac_mc_add_mc(mci)) { | 
|  | 396 | debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__); | 
|  | 397 | goto fail; | 
|  | 398 | } | 
|  | 399 |  | 
|  | 400 | /* get this far and it's successful */ | 
|  | 401 | debugf3("MC: %s(): success\n", __func__); | 
|  | 402 | return 0; | 
|  | 403 |  | 
|  | 404 | fail: | 
|  | 405 | iounmap(window); | 
|  | 406 | if (mci) | 
|  | 407 | edac_mc_free(mci); | 
|  | 408 |  | 
|  | 409 | return rc; | 
|  | 410 | } | 
|  | 411 |  | 
|  | 412 | static int __devinit x38_init_one(struct pci_dev *pdev, | 
|  | 413 | const struct pci_device_id *ent) | 
|  | 414 | { | 
|  | 415 | int rc; | 
|  | 416 |  | 
|  | 417 | debugf0("MC: %s()\n", __func__); | 
|  | 418 |  | 
|  | 419 | if (pci_enable_device(pdev) < 0) | 
|  | 420 | return -EIO; | 
|  | 421 |  | 
|  | 422 | rc = x38_probe1(pdev, ent->driver_data); | 
|  | 423 | if (!mci_pdev) | 
|  | 424 | mci_pdev = pci_dev_get(pdev); | 
|  | 425 |  | 
|  | 426 | return rc; | 
|  | 427 | } | 
|  | 428 |  | 
|  | 429 | static void __devexit x38_remove_one(struct pci_dev *pdev) | 
|  | 430 | { | 
|  | 431 | struct mem_ctl_info *mci; | 
|  | 432 |  | 
|  | 433 | debugf0("%s()\n", __func__); | 
|  | 434 |  | 
|  | 435 | mci = edac_mc_del_mc(&pdev->dev); | 
|  | 436 | if (!mci) | 
|  | 437 | return; | 
|  | 438 |  | 
|  | 439 | iounmap(mci->pvt_info); | 
|  | 440 |  | 
|  | 441 | edac_mc_free(mci); | 
|  | 442 | } | 
|  | 443 |  | 
|  | 444 | static const struct pci_device_id x38_pci_tbl[] __devinitdata = { | 
|  | 445 | { | 
|  | 446 | PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, | 
|  | 447 | X38}, | 
|  | 448 | { | 
|  | 449 | 0, | 
|  | 450 | }			/* 0 terminated list. */ | 
|  | 451 | }; | 
|  | 452 |  | 
|  | 453 | MODULE_DEVICE_TABLE(pci, x38_pci_tbl); | 
|  | 454 |  | 
|  | 455 | static struct pci_driver x38_driver = { | 
|  | 456 | .name = EDAC_MOD_STR, | 
|  | 457 | .probe = x38_init_one, | 
|  | 458 | .remove = __devexit_p(x38_remove_one), | 
|  | 459 | .id_table = x38_pci_tbl, | 
|  | 460 | }; | 
|  | 461 |  | 
|  | 462 | static int __init x38_init(void) | 
|  | 463 | { | 
|  | 464 | int pci_rc; | 
|  | 465 |  | 
|  | 466 | debugf3("MC: %s()\n", __func__); | 
|  | 467 |  | 
|  | 468 | /* Ensure that the OPSTATE is set correctly for POLL or NMI */ | 
|  | 469 | opstate_init(); | 
|  | 470 |  | 
|  | 471 | pci_rc = pci_register_driver(&x38_driver); | 
|  | 472 | if (pci_rc < 0) | 
|  | 473 | goto fail0; | 
|  | 474 |  | 
|  | 475 | if (!mci_pdev) { | 
|  | 476 | x38_registered = 0; | 
|  | 477 | mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, | 
|  | 478 | PCI_DEVICE_ID_INTEL_X38_HB, NULL); | 
|  | 479 | if (!mci_pdev) { | 
|  | 480 | debugf0("x38 pci_get_device fail\n"); | 
|  | 481 | pci_rc = -ENODEV; | 
|  | 482 | goto fail1; | 
|  | 483 | } | 
|  | 484 |  | 
|  | 485 | pci_rc = x38_init_one(mci_pdev, x38_pci_tbl); | 
|  | 486 | if (pci_rc < 0) { | 
|  | 487 | debugf0("x38 init fail\n"); | 
|  | 488 | pci_rc = -ENODEV; | 
|  | 489 | goto fail1; | 
|  | 490 | } | 
|  | 491 | } | 
|  | 492 |  | 
|  | 493 | return 0; | 
|  | 494 |  | 
|  | 495 | fail1: | 
|  | 496 | pci_unregister_driver(&x38_driver); | 
|  | 497 |  | 
|  | 498 | fail0: | 
|  | 499 | if (mci_pdev) | 
|  | 500 | pci_dev_put(mci_pdev); | 
|  | 501 |  | 
|  | 502 | return pci_rc; | 
|  | 503 | } | 
|  | 504 |  | 
|  | 505 | static void __exit x38_exit(void) | 
|  | 506 | { | 
|  | 507 | debugf3("MC: %s()\n", __func__); | 
|  | 508 |  | 
|  | 509 | pci_unregister_driver(&x38_driver); | 
|  | 510 | if (!x38_registered) { | 
|  | 511 | x38_remove_one(mci_pdev); | 
|  | 512 | pci_dev_put(mci_pdev); | 
|  | 513 | } | 
|  | 514 | } | 
|  | 515 |  | 
|  | 516 | module_init(x38_init); | 
|  | 517 | module_exit(x38_exit); | 
|  | 518 |  | 
|  | 519 | MODULE_LICENSE("GPL"); | 
|  | 520 | MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake"); | 
|  | 521 | MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers"); | 
|  | 522 |  | 
|  | 523 | module_param(edac_op_state, int, 0444); | 
|  | 524 | MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); |