| Kumar Gala | 2e8685a | 2011-11-03 16:16:07 -0500 | [diff] [blame] | 1 | /* |
| 2 | * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) |
| 3 | * |
| 4 | * Copyright 2011 Freescale Semiconductor Inc. |
| 5 | * |
| 6 | * Redistribution and use in source and binary forms, with or without |
| 7 | * modification, are permitted provided that the following conditions are met: |
| 8 | * * Redistributions of source code must retain the above copyright |
| 9 | * notice, this list of conditions and the following disclaimer. |
| 10 | * * Redistributions in binary form must reproduce the above copyright |
| 11 | * notice, this list of conditions and the following disclaimer in the |
| 12 | * documentation and/or other materials provided with the distribution. |
| 13 | * * Neither the name of Freescale Semiconductor nor the |
| 14 | * names of its contributors may be used to endorse or promote products |
| 15 | * derived from this software without specific prior written permission. |
| 16 | * |
| 17 | * |
| 18 | * ALTERNATIVELY, this software may be distributed under the terms of the |
| 19 | * GNU General Public License ("GPL") as published by the Free Software |
| 20 | * Foundation, either version 2 of that License or (at your option) any |
| 21 | * later version. |
| 22 | * |
| 23 | * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| 24 | * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| 25 | * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 26 | * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| 27 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 28 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 29 | * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 30 | * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 31 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| 32 | * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 33 | */ |
| 34 | |
| 35 | &board_soc { |
| 36 | i2c@3100 { |
| 37 | rtc@68 { |
| 38 | compatible = "dallas,ds3232"; |
| 39 | reg = <0x68>; |
| 40 | interrupts = <0 0x1 0 0>; |
| 41 | }; |
| 42 | }; |
| 43 | |
| 44 | spi@7000 { |
| 45 | flash@0 { |
| 46 | #address-cells = <1>; |
| 47 | #size-cells = <1>; |
| 48 | compatible = "spansion,s25sl12801"; |
| 49 | reg = <0>; |
| 50 | spi-max-frequency = <40000000>; |
| 51 | partition@u-boot { |
| 52 | label = "u-boot"; |
| 53 | reg = <0x00000000 0x00100000>; |
| 54 | read-only; |
| 55 | }; |
| 56 | partition@kernel { |
| 57 | label = "kernel"; |
| 58 | reg = <0x00100000 0x00500000>; |
| 59 | read-only; |
| 60 | }; |
| 61 | partition@dtb { |
| 62 | label = "dtb"; |
| 63 | reg = <0x00600000 0x00100000>; |
| 64 | read-only; |
| 65 | }; |
| 66 | partition@fs { |
| 67 | label = "file system"; |
| 68 | reg = <0x00700000 0x00900000>; |
| 69 | }; |
| 70 | }; |
| 71 | flash@1 { |
| 72 | compatible = "spansion,s25sl12801"; |
| 73 | reg = <1>; |
| 74 | spi-max-frequency = <40000000>; |
| 75 | }; |
| 76 | flash@2 { |
| 77 | compatible = "spansion,s25sl12801"; |
| 78 | reg = <2>; |
| 79 | spi-max-frequency = <40000000>; |
| 80 | }; |
| 81 | flash@3 { |
| 82 | compatible = "spansion,s25sl12801"; |
| 83 | reg = <3>; |
| 84 | spi-max-frequency = <40000000>; |
| 85 | }; |
| 86 | }; |
| 87 | |
| 88 | usb@22000 { |
| 89 | phy_type = "ulpi"; |
| 90 | }; |
| 91 | |
| 92 | usb@23000 { |
| 93 | phy_type = "ulpi"; |
| 94 | }; |
| 95 | |
| 96 | enet0: ethernet@24000 { |
| 97 | tbi-handle = <&tbi0>; |
| 98 | phy-handle = <&phy1>; |
| 99 | phy-connection-type = "rgmii-id"; |
| 100 | }; |
| 101 | |
| 102 | mdio@24520 { |
| 103 | phy0: ethernet-phy@0 { |
| 104 | interrupts = <10 0x1 0 0>; |
| 105 | reg = <0>; |
| 106 | device_type = "ethernet-phy"; |
| 107 | }; |
| 108 | phy1: ethernet-phy@1 { |
| 109 | interrupts = <10 0x1 0 0>; |
| 110 | reg = <1>; |
| 111 | device_type = "ethernet-phy"; |
| 112 | }; |
| 113 | tbi0: tbi-phy@11 { |
| 114 | reg = <0x11>; |
| 115 | device_type = "tbi-phy"; |
| 116 | }; |
| 117 | }; |
| 118 | |
| 119 | enet2: ethernet@26000 { |
| 120 | tbi-handle = <&tbi1>; |
| 121 | phy-handle = <&phy0>; |
| 122 | phy-connection-type = "rgmii-id"; |
| 123 | }; |
| 124 | |
| 125 | mdio@26520 { |
| 126 | #address-cells = <1>; |
| 127 | #size-cells = <0>; |
| 128 | compatible = "fsl,gianfar-tbi"; |
| 129 | reg = <0x26520 0x20>; |
| 130 | |
| 131 | tbi1: tbi-phy@11 { |
| 132 | reg = <0x11>; |
| 133 | device_type = "tbi-phy"; |
| 134 | }; |
| 135 | }; |
| 136 | |
| 137 | usb@2b000 { |
| 138 | dr_mode = "peripheral"; |
| 139 | phy_type = "ulpi"; |
| 140 | }; |
| 141 | }; |