arch/powerpc/boot/dts/mpc8555cds.dts

/*
 * MPC8555 CDS Device Tree Source
 *
 * Copyright 2006, 2008 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/dts-v1/;

/ {
	model = "MPC8555CDS";
	compatible = "MPC8555CDS", "MPC85xxCDS";
	#address-cells = <1>;
	#size-cells = <1>;

	aliases {
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		serial0 = &serial0;
		serial1 = &serial1;
		pci0 = &pci0;
		pci1 = &pci1;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		PowerPC,8555@0 {
			device_type = "cpu";
			reg = <0x0>;
			d-cache-line-size = <32>;	// 32 bytes
			i-cache-line-size = <32>;	// 32 bytes
			d-cache-size = <0x8000>;		// L1, 32K
			i-cache-size = <0x8000>;		// L1, 32K
			timebase-frequency = <0>;	//  33 MHz, from uboot
			bus-frequency = <0>;	// 166 MHz
			clock-frequency = <0>;	// 825 MHz, from uboot
			next-level-cache = <&L2>;
		};
	};

	memory {
		device_type = "memory";
		reg = <0x0 0x8000000>;	// 128M at 0x0
	};

	soc8555@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "soc";
		ranges = <0x0 0xe0000000 0x100000>;
		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
		bus-frequency = <0>;

		memory-controller@2000 {
			compatible = "fsl,8555-memory-controller";
			reg = <0x2000 0x1000>;
			interrupt-parent = <&mpic>;
			interrupts = <18 2>;
		};

		L2: l2-cache-controller@20000 {
			compatible = "fsl,8555-l2-cache-controller";
			reg = <0x20000 0x1000>;
			cache-line-size = <32>;	// 32 bytes
			cache-size = <0x40000>;	// L2, 256K
			interrupt-parent = <&mpic>;
			interrupts = <16 2>;
		};

		i2c@3000 {
			#address-cells = <1>;
			#size-cells = <0>;
			cell-index = <0>;
			compatible = "fsl-i2c";
			reg = <0x3000 0x100>;
			interrupts = <43 2>;
			interrupt-parent = <&mpic>;
			dfsrr;
		};

		mdio@24520 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "fsl,gianfar-mdio";
			reg = <0x24520 0x20>;

			phy0: ethernet-phy@0 {
				interrupt-parent = <&mpic>;
				interrupts = <5 1>;
				reg = <0x0>;
				device_type = "ethernet-phy";
			};
			phy1: ethernet-phy@1 {
				interrupt-parent = <&mpic>;
				interrupts = <5 1>;
				reg = <0x1>;
				device_type = "ethernet-phy";
			};
		};

		enet0: ethernet@24000 {
			cell-index = <0>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x24000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <29 2 30 2 34 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy0>;
		};

		enet1: ethernet@25000 {
			cell-index = <1>;
			device_type = "network";
			model = "TSEC";
			compatible = "gianfar";
			reg = <0x25000 0x1000>;
			local-mac-address = [ 00 00 00 00 00 00 ];
			interrupts = <35 2 36 2 40 2>;
			interrupt-parent = <&mpic>;
			phy-handle = <&phy1>;
		};

		serial0: serial@4500 {
			cell-index = <0>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4500 0x100>; 	// reg base, size
			clock-frequency = <0>; 	// should we fill in in uboot?
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		serial1: serial@4600 {
			cell-index = <1>;
			device_type = "serial";
			compatible = "ns16550";
			reg = <0x4600 0x100>;	// reg base, size
			clock-frequency = <0>; 	// should we fill in in uboot?
			interrupts = <42 2>;
			interrupt-parent = <&mpic>;
		};

		mpic: pic@40000 {
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x40000 0x40000>;
			compatible = "chrp,open-pic";
			device_type = "open-pic";
		};

		cpm@919c0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
			reg = <0x919c0 0x30>;
			ranges;

			muram@80000 {
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0x0 0x80000 0x10000>;

				data@0 {
					compatible = "fsl,cpm-muram-data";
					reg = <0x0 0x2000 0x9000 0x1000>;
				};
			};

			brg@919f0 {
				compatible = "fsl,mpc8555-brg",
				             "fsl,cpm2-brg",
				             "fsl,cpm-brg";
				reg = <0x919f0 0x10 0x915f0 0x10>;
			};

			cpmpic: pic@90c00 {
				interrupt-controller;
				#address-cells = <0>;
				#interrupt-cells = <2>;
				interrupts = <46 2>;
				interrupt-parent = <&mpic>;
				reg = <0x90c00 0x80>;
				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
			};
		};
	};

	pci0: pci@e0008000 {
		cell-index = <0>;
		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
		interrupt-map = <

			/* IDSEL 0x10 */
			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1

			/* IDSEL 0x11 */
			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1

			/* IDSEL 0x12 (Slot 1) */
			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1

			/* IDSEL 0x13 (Slot 2) */
			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1

			/* IDSEL 0x14 (Slot 3) */
			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1

			/* IDSEL 0x15 (Slot 4) */
			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1

			/* Bus 1 (Tundra Bridge) */
			/* IDSEL 0x12 (ISA bridge) */
			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
		interrupt-parent = <&mpic>;
		interrupts = <24 2>;
		bus-range = <0 0>;
		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
		clock-frequency = <66666666>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe0008000 0x1000>;
		compatible = "fsl,mpc8540-pci";
		device_type = "pci";

		i8259@19000 {
			interrupt-controller;
			device_type = "interrupt-controller";
			reg = <0x19000 0x0 0x0 0x0 0x1>;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			compatible = "chrp,iic";
			interrupts = <1>;
			interrupt-parent = <&pci0>;
		};
	};

	pci1: pci@e0009000 {
		cell-index = <1>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <

			/* IDSEL 0x15 */
			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
		interrupt-parent = <&mpic>;
		interrupts = <25 2>;
		bus-range = <0 0>;
		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
		clock-frequency = <66666666>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		reg = <0xe0009000 0x1000>;
		compatible = "fsl,mpc8540-pci";
		device_type = "pci";
	};
};