| Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | Notes for the QLogic ISP1020 PCI SCSI Driver: |
| 2 | |
| 3 | This driver works well in practice, but does not support disconnect/ |
| 4 | reconnect, which makes using it with tape drives impractical. |
| 5 | |
| 6 | It should work for most host adaptors with the ISP1020 chip. The |
| 7 | QLogic Corporation produces several PCI SCSI adapters which should |
| 8 | work: |
| 9 | |
| 10 | * IQ-PCI |
| 11 | * IQ-PCI-10 |
| 12 | * IQ-PCI-D |
| 13 | |
| 14 | This driver may work with boards containing the ISP1020A or ISP1040A |
| 15 | chips, but that has not been tested. |
| 16 | |
| 17 | This driver will NOT work with: |
| 18 | |
| 19 | * ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver) |
| 20 | * PCI-basic (it uses the 'am53c974' driver) |
| 21 | |
| 22 | Much thanks to QLogic's tech support for providing the latest ISP1020 |
| 23 | firmware, and for taking the time to review my code. |
| 24 | |
| 25 | Erik Moe |
| 26 | ehm@cris.com |
| 27 | |
| 28 | Revised: |
| 29 | Michael A. Griffith |
| 30 | grif@cs.ucr.edu |