Blame - Documentation/hwmon/ucd9000 - android_kernel_oneplus_msm8996

blob: 0df5f276505b6470e28f00c86c6bd1d76aad5b4d [file] [log] [blame]

Guenter Roeck	0c0a061	2011-03-08 22:01:39 -0800	[diff] [blame]	1	Kernel driver ucd9000
				2	=====================
				3
				4	Supported chips:
				5	* TI UCD90120, UCD90124, UCD9090, and UCD90910
				6	Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910'
				7	Addresses scanned: -
				8	Datasheets:
				9	http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
				10	http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
				11	http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
				12	http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
				13
				14	Author: Guenter Roeck <guenter.roeck@ericsson.com>
				15
				16
				17	Description
				18	-----------
				19
				20	From datasheets:
				21
				22	The UCD90120 Power Supply Sequencer and System Health Monitor monitors and
				23	sequences up to 12 independent voltage rails. The device integrates a 12-bit
				24	ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage,
				25	current, or temperature inputs.
				26
				27	The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
				28	system-health monitor. The device integrates a 12-bit ADC for monitoring up to
				29	13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
				30	can be used for power supply enables, power-on reset signals, external
				31	interrupts, cascading, or other system functions. Twelve of these pins offer PWM
				32	functionality. Using these pins, the UCD90124 offers support for fan control,
				33	margining, and general-purpose PWM functions.
				34
				35	The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
				36	monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
				37	voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
				38	power-on reset signals, external interrupts, cascading, or other system
				39	functions. Ten of these pins offer PWM functionality. Using these pins, the
				40	UCD9090 offers support for margining, and general-purpose PWM functions.
				41
				42	The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
				43	system-health monitor. The device integrates a 12-bit ADC for monitoring up to
				44	13 power-supply voltage, current, or temperature inputs.
				45
				46	This driver is a client driver to the core PMBus driver. Please see
				47	Documentation/hwmon/pmbus for details on PMBus client drivers.
				48
				49
				50	Usage Notes
				51	-----------
				52
				53	This driver does not auto-detect devices. You will have to instantiate the
				54	devices explicitly. Please see Documentation/i2c/instantiating-devices for
				55	details.
				56
				57
				58	Platform data support
				59	---------------------
				60
				61	The driver supports standard PMBus driver platform data. Please see
				62	Documentation/hwmon/pmbus for details.
				63
				64
				65	Sysfs entries
				66	-------------
				67
				68	The following attributes are supported. Limits are read-write; all other
				69	attributes are read-only.
				70
				71	in[1-12]_label "vout[1-12]".
				72	in[1-12]_input Measured voltage. From READ_VOUT register.
Masanari Iida	40e4712	2012-03-04 23:16:11 +0900	[diff] [blame]	73	in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
Guenter Roeck	0c0a061	2011-03-08 22:01:39 -0800	[diff] [blame]	74	in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
Masanari Iida	40e4712	2012-03-04 23:16:11 +0900	[diff] [blame]	75	in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
Guenter Roeck	0c0a061	2011-03-08 22:01:39 -0800	[diff] [blame]	76	in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
				77	in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
				78	in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
				79	in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
				80	in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
				81
				82	curr[1-12]_label "iout[1-12]".
				83	curr[1-12]_input Measured current. From READ_IOUT register.
				84	curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
Masanari Iida	40e4712	2012-03-04 23:16:11 +0900	[diff] [blame]	85	curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
Guenter Roeck	0c0a061	2011-03-08 22:01:39 -0800	[diff] [blame]	86	register.
				87	curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
				88	curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
				89	curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
				90
				91	For each attribute index, either voltage or current is
				92	reported, but not both. If voltage or current is
				93	reported depends on the chip configuration.
				94
				95	temp[1-2]_input Measured temperatures. From READ_TEMPERATURE_1 and
				96	READ_TEMPERATURE_2 registers.
				97	temp[1-2]_max Maximum temperature. From OT_WARN_LIMIT register.
				98	temp[1-2]_crit Critical high temperature. From OT_FAULT_LIMIT register.
				99	temp[1-2]_max_alarm Temperature high alarm.
				100	temp[1-2]_crit_alarm Temperature critical high alarm.
				101
				102	fan[1-4]_input Fan RPM.
				103	fan[1-4]_alarm Fan alarm.
				104	fan[1-4]_fault Fan fault.
				105
				106	Fan attributes are only available on chips supporting
				107	fan control (UCD90124, UCD90910). Attribute files are
				108	created only for enabled fans.
				109	Note that even though UCD90910 supports up to 10 fans,
				110	only up to four fans are currently supported.