| Komal Shah | ad4e09b | 2006-09-29 01:59:19 -0700 | [diff] [blame] | 1 | /* | 
 | 2 |  * linux/drivers/input/keyboard/omap-keypad.c | 
 | 3 |  * | 
 | 4 |  * OMAP Keypad Driver | 
 | 5 |  * | 
 | 6 |  * Copyright (C) 2003 Nokia Corporation | 
 | 7 |  * Written by Timo Teräs <ext-timo.teras@nokia.com> | 
 | 8 |  * | 
 | 9 |  * Added support for H2 & H3 Keypad | 
 | 10 |  * Copyright (C) 2004 Texas Instruments | 
 | 11 |  * | 
 | 12 |  * This program is free software; you can redistribute it and/or modify | 
 | 13 |  * it under the terms of the GNU General Public License as published by | 
 | 14 |  * the Free Software Foundation; either version 2 of the License, or | 
 | 15 |  * (at your option) any later version. | 
 | 16 |  * | 
 | 17 |  * This program is distributed in the hope that it will be useful, | 
 | 18 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 | 19 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
 | 20 |  * GNU General Public License for more details. | 
 | 21 |  * | 
 | 22 |  * You should have received a copy of the GNU General Public License | 
 | 23 |  * along with this program; if not, write to the Free Software | 
 | 24 |  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
 | 25 |  */ | 
 | 26 |  | 
 | 27 | #include <linux/module.h> | 
 | 28 | #include <linux/init.h> | 
 | 29 | #include <linux/interrupt.h> | 
 | 30 | #include <linux/types.h> | 
 | 31 | #include <linux/input.h> | 
 | 32 | #include <linux/kernel.h> | 
 | 33 | #include <linux/delay.h> | 
 | 34 | #include <linux/platform_device.h> | 
 | 35 | #include <linux/mutex.h> | 
 | 36 | #include <linux/errno.h> | 
 | 37 | #include <asm/arch/gpio.h> | 
 | 38 | #include <asm/arch/keypad.h> | 
 | 39 | #include <asm/arch/menelaus.h> | 
 | 40 | #include <asm/irq.h> | 
 | 41 | #include <asm/hardware.h> | 
 | 42 | #include <asm/io.h> | 
 | 43 | #include <asm/mach-types.h> | 
 | 44 | #include <asm/arch/mux.h> | 
 | 45 |  | 
 | 46 | #undef NEW_BOARD_LEARNING_MODE | 
 | 47 |  | 
 | 48 | static void omap_kp_tasklet(unsigned long); | 
 | 49 | static void omap_kp_timer(unsigned long); | 
 | 50 |  | 
 | 51 | static unsigned char keypad_state[8]; | 
 | 52 | static DEFINE_MUTEX(kp_enable_mutex); | 
 | 53 | static int kp_enable = 1; | 
 | 54 | static int kp_cur_group = -1; | 
 | 55 |  | 
 | 56 | struct omap_kp { | 
 | 57 | 	struct input_dev *input; | 
 | 58 | 	struct timer_list timer; | 
 | 59 | 	int irq; | 
 | 60 | 	unsigned int rows; | 
 | 61 | 	unsigned int cols; | 
 | 62 | 	unsigned long delay; | 
 | 63 | 	unsigned int debounce; | 
 | 64 | }; | 
 | 65 |  | 
 | 66 | DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0); | 
 | 67 |  | 
 | 68 | static int *keymap; | 
 | 69 | static unsigned int *row_gpios; | 
 | 70 | static unsigned int *col_gpios; | 
 | 71 |  | 
 | 72 | #ifdef CONFIG_ARCH_OMAP2 | 
 | 73 | static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value) | 
 | 74 | { | 
 | 75 | 	int col; | 
 | 76 | 	for (col = 0; col < omap_kp->cols; col++) { | 
 | 77 | 		if (value & (1 << col)) | 
 | 78 | 			omap_set_gpio_dataout(col_gpios[col], 1); | 
 | 79 | 		else | 
 | 80 | 			omap_set_gpio_dataout(col_gpios[col], 0); | 
 | 81 | 	} | 
 | 82 | } | 
 | 83 |  | 
 | 84 | static u8 get_row_gpio_val(struct omap_kp *omap_kp) | 
 | 85 | { | 
 | 86 | 	int row; | 
 | 87 | 	u8 value = 0; | 
 | 88 |  | 
 | 89 | 	for (row = 0; row < omap_kp->rows; row++) { | 
 | 90 | 		if (omap_get_gpio_datain(row_gpios[row])) | 
 | 91 | 			value |= (1 << row); | 
 | 92 | 	} | 
 | 93 | 	return value; | 
 | 94 | } | 
 | 95 | #else | 
 | 96 | #define		set_col_gpio_val(x, y)	do {} while (0) | 
 | 97 | #define		get_row_gpio_val(x)	0 | 
 | 98 | #endif | 
 | 99 |  | 
| David Howells | 7d12e78 | 2006-10-05 14:55:46 +0100 | [diff] [blame] | 100 | static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) | 
| Komal Shah | ad4e09b | 2006-09-29 01:59:19 -0700 | [diff] [blame] | 101 | { | 
 | 102 | 	struct omap_kp *omap_kp = dev_id; | 
 | 103 |  | 
 | 104 | 	/* disable keyboard interrupt and schedule for handling */ | 
 | 105 | 	if (cpu_is_omap24xx()) { | 
 | 106 | 		int i; | 
 | 107 | 		for (i = 0; i < omap_kp->rows; i++) | 
 | 108 | 			disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
 | 109 | 	} else | 
 | 110 | 		/* disable keyboard interrupt and schedule for handling */ | 
 | 111 | 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 112 |  | 
 | 113 | 	tasklet_schedule(&kp_tasklet); | 
 | 114 |  | 
 | 115 | 	return IRQ_HANDLED; | 
 | 116 | } | 
 | 117 |  | 
 | 118 | static void omap_kp_timer(unsigned long data) | 
 | 119 | { | 
 | 120 | 	tasklet_schedule(&kp_tasklet); | 
 | 121 | } | 
 | 122 |  | 
 | 123 | static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state) | 
 | 124 | { | 
 | 125 | 	int col = 0; | 
 | 126 |  | 
 | 127 | 	/* read the keypad status */ | 
 | 128 | 	if (cpu_is_omap24xx()) { | 
 | 129 | 		int i; | 
 | 130 | 		for (i = 0; i < omap_kp->rows; i++) | 
 | 131 | 			disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
 | 132 |  | 
 | 133 | 		/* read the keypad status */ | 
 | 134 | 		for (col = 0; col < omap_kp->cols; col++) { | 
 | 135 | 			set_col_gpio_val(omap_kp, ~(1 << col)); | 
 | 136 | 			state[col] = ~(get_row_gpio_val(omap_kp)) & 0x3f; | 
 | 137 | 		} | 
 | 138 | 		set_col_gpio_val(omap_kp, 0); | 
 | 139 |  | 
 | 140 | 	} else { | 
 | 141 | 		/* disable keyboard interrupt and schedule for handling */ | 
 | 142 | 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 143 |  | 
 | 144 | 		/* read the keypad status */ | 
 | 145 | 		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
 | 146 | 		for (col = 0; col < omap_kp->cols; col++) { | 
 | 147 | 			omap_writew(~(1 << col) & 0xff, | 
 | 148 | 				    OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
 | 149 |  | 
 | 150 | 			udelay(omap_kp->delay); | 
 | 151 |  | 
 | 152 | 			state[col] = ~omap_readw(OMAP_MPUIO_BASE + | 
 | 153 | 						 OMAP_MPUIO_KBR_LATCH) & 0xff; | 
 | 154 | 		} | 
 | 155 | 		omap_writew(0x00, OMAP_MPUIO_BASE + OMAP_MPUIO_KBC); | 
 | 156 | 		udelay(2); | 
 | 157 | 	} | 
 | 158 | } | 
 | 159 |  | 
 | 160 | static inline int omap_kp_find_key(int col, int row) | 
 | 161 | { | 
 | 162 | 	int i, key; | 
 | 163 |  | 
 | 164 | 	key = KEY(col, row, 0); | 
 | 165 | 	for (i = 0; keymap[i] != 0; i++) | 
 | 166 | 		if ((keymap[i] & 0xff000000) == key) | 
 | 167 | 			return keymap[i] & 0x00ffffff; | 
 | 168 | 	return -1; | 
 | 169 | } | 
 | 170 |  | 
 | 171 | static void omap_kp_tasklet(unsigned long data) | 
 | 172 | { | 
 | 173 | 	struct omap_kp *omap_kp_data = (struct omap_kp *) data; | 
 | 174 | 	unsigned char new_state[8], changed, key_down = 0; | 
 | 175 | 	int col, row; | 
 | 176 | 	int spurious = 0; | 
 | 177 |  | 
 | 178 | 	/* check for any changes */ | 
 | 179 | 	omap_kp_scan_keypad(omap_kp_data, new_state); | 
 | 180 |  | 
 | 181 | 	/* check for changes and print those */ | 
 | 182 | 	for (col = 0; col < omap_kp_data->cols; col++) { | 
 | 183 | 		changed = new_state[col] ^ keypad_state[col]; | 
 | 184 | 		key_down |= new_state[col]; | 
 | 185 | 		if (changed == 0) | 
 | 186 | 			continue; | 
 | 187 |  | 
 | 188 | 		for (row = 0; row < omap_kp_data->rows; row++) { | 
 | 189 | 			int key; | 
 | 190 | 			if (!(changed & (1 << row))) | 
 | 191 | 				continue; | 
 | 192 | #ifdef NEW_BOARD_LEARNING_MODE | 
 | 193 | 			printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col, | 
 | 194 | 			       row, (new_state[col] & (1 << row)) ? | 
 | 195 | 			       "pressed" : "released"); | 
 | 196 | #else | 
 | 197 | 			key = omap_kp_find_key(col, row); | 
 | 198 | 			if (key < 0) { | 
 | 199 | 				printk(KERN_WARNING | 
 | 200 | 				      "omap-keypad: Spurious key event %d-%d\n", | 
 | 201 | 				       col, row); | 
 | 202 | 				/* We scan again after a couple of seconds */ | 
 | 203 | 				spurious = 1; | 
 | 204 | 				continue; | 
 | 205 | 			} | 
 | 206 |  | 
 | 207 | 			if (!(kp_cur_group == (key & GROUP_MASK) || | 
 | 208 | 			      kp_cur_group == -1)) | 
 | 209 | 				continue; | 
 | 210 |  | 
 | 211 | 			kp_cur_group = key & GROUP_MASK; | 
 | 212 | 			input_report_key(omap_kp_data->input, key & ~GROUP_MASK, | 
 | 213 | 					 new_state[col] & (1 << row)); | 
 | 214 | #endif | 
 | 215 | 		} | 
 | 216 | 	} | 
 | 217 | 	memcpy(keypad_state, new_state, sizeof(keypad_state)); | 
 | 218 |  | 
 | 219 | 	if (key_down) { | 
 | 220 |                 int delay = HZ / 20; | 
 | 221 | 		/* some key is pressed - keep irq disabled and use timer | 
 | 222 | 		 * to poll the keypad */ | 
 | 223 | 		if (spurious) | 
 | 224 | 			delay = 2 * HZ; | 
 | 225 | 		mod_timer(&omap_kp_data->timer, jiffies + delay); | 
 | 226 | 	} else { | 
 | 227 | 		/* enable interrupts */ | 
 | 228 | 		if (cpu_is_omap24xx()) { | 
 | 229 | 			int i; | 
 | 230 | 			for (i = 0; i < omap_kp_data->rows; i++) | 
 | 231 | 				enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); | 
 | 232 | 		} else { | 
 | 233 | 			omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 234 | 			kp_cur_group = -1; | 
 | 235 | 		} | 
 | 236 |  	} | 
 | 237 | } | 
 | 238 |  | 
 | 239 | static ssize_t omap_kp_enable_show(struct device *dev, | 
 | 240 | 				   struct device_attribute *attr, char *buf) | 
 | 241 | { | 
 | 242 | 	return sprintf(buf, "%u\n", kp_enable); | 
 | 243 | } | 
 | 244 |  | 
 | 245 | static ssize_t omap_kp_enable_store(struct device *dev, struct device_attribute *attr, | 
 | 246 | 				    const char *buf, size_t count) | 
 | 247 | { | 
 | 248 | 	int state; | 
 | 249 |  | 
 | 250 | 	if (sscanf(buf, "%u", &state) != 1) | 
 | 251 | 		return -EINVAL; | 
 | 252 |  | 
 | 253 | 	if ((state != 1) && (state != 0)) | 
 | 254 | 		return -EINVAL; | 
 | 255 |  | 
 | 256 | 	mutex_lock(&kp_enable_mutex); | 
 | 257 | 	if (state != kp_enable) { | 
 | 258 | 		if (state) | 
 | 259 | 			enable_irq(INT_KEYBOARD); | 
 | 260 | 		else | 
 | 261 | 			disable_irq(INT_KEYBOARD); | 
 | 262 | 		kp_enable = state; | 
 | 263 | 	} | 
 | 264 | 	mutex_unlock(&kp_enable_mutex); | 
 | 265 |  | 
 | 266 | 	return strnlen(buf, count); | 
 | 267 | } | 
 | 268 |  | 
 | 269 | static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, omap_kp_enable_show, omap_kp_enable_store); | 
 | 270 |  | 
 | 271 | #ifdef CONFIG_PM | 
 | 272 | static int omap_kp_suspend(struct platform_device *dev, pm_message_t state) | 
 | 273 | { | 
 | 274 | 	/* Nothing yet */ | 
 | 275 |  | 
 | 276 | 	return 0; | 
 | 277 | } | 
 | 278 |  | 
 | 279 | static int omap_kp_resume(struct platform_device *dev) | 
 | 280 | { | 
 | 281 | 	/* Nothing yet */ | 
 | 282 |  | 
 | 283 | 	return 0; | 
 | 284 | } | 
 | 285 | #else | 
 | 286 | #define omap_kp_suspend	NULL | 
 | 287 | #define omap_kp_resume	NULL | 
 | 288 | #endif | 
 | 289 |  | 
 | 290 | static int __init omap_kp_probe(struct platform_device *pdev) | 
 | 291 | { | 
 | 292 | 	struct omap_kp *omap_kp; | 
 | 293 | 	struct input_dev *input_dev; | 
 | 294 | 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data; | 
 | 295 | 	int i, col_idx, row_idx, irq_idx, ret; | 
 | 296 |  | 
 | 297 | 	if (!pdata->rows || !pdata->cols || !pdata->keymap) { | 
 | 298 | 		printk(KERN_ERR "No rows, cols or keymap from pdata\n"); | 
 | 299 | 		return -EINVAL; | 
 | 300 | 	} | 
 | 301 |  | 
 | 302 | 	omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL); | 
 | 303 | 	input_dev = input_allocate_device(); | 
 | 304 | 	if (!omap_kp || !input_dev) { | 
 | 305 | 		kfree(omap_kp); | 
 | 306 | 		input_free_device(input_dev); | 
 | 307 | 		return -ENOMEM; | 
 | 308 | 	} | 
 | 309 |  | 
 | 310 | 	platform_set_drvdata(pdev, omap_kp); | 
 | 311 |  | 
 | 312 | 	omap_kp->input = input_dev; | 
 | 313 |  | 
 | 314 | 	/* Disable the interrupt for the MPUIO keyboard */ | 
 | 315 | 	if (!cpu_is_omap24xx()) | 
 | 316 | 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 317 |  | 
 | 318 | 	keymap = pdata->keymap; | 
 | 319 |  | 
 | 320 | 	if (pdata->rep) | 
 | 321 | 		set_bit(EV_REP, input_dev->evbit); | 
 | 322 |  | 
 | 323 | 	if (pdata->delay) | 
 | 324 | 		omap_kp->delay = pdata->delay; | 
 | 325 |  | 
 | 326 | 	if (pdata->row_gpios && pdata->col_gpios) { | 
 | 327 | 		row_gpios = pdata->row_gpios; | 
 | 328 | 		col_gpios = pdata->col_gpios; | 
 | 329 | 	} | 
 | 330 |  | 
 | 331 | 	omap_kp->rows = pdata->rows; | 
 | 332 | 	omap_kp->cols = pdata->cols; | 
 | 333 |  | 
 | 334 | 	if (cpu_is_omap24xx()) { | 
 | 335 | 		/* Cols: outputs */ | 
 | 336 | 		for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) { | 
 | 337 | 			if (omap_request_gpio(col_gpios[col_idx]) < 0) { | 
 | 338 | 				printk(KERN_ERR "Failed to request" | 
 | 339 | 				       "GPIO%d for keypad\n", | 
 | 340 | 				       col_gpios[col_idx]); | 
 | 341 | 				goto err1; | 
 | 342 | 			} | 
 | 343 | 			omap_set_gpio_direction(col_gpios[col_idx], 0); | 
 | 344 | 		} | 
 | 345 | 		/* Rows: inputs */ | 
 | 346 | 		for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) { | 
 | 347 | 			if (omap_request_gpio(row_gpios[row_idx]) < 0) { | 
 | 348 | 				printk(KERN_ERR "Failed to request" | 
 | 349 | 				       "GPIO%d for keypad\n", | 
 | 350 | 				       row_gpios[row_idx]); | 
 | 351 | 				goto err2; | 
 | 352 | 			} | 
 | 353 | 			omap_set_gpio_direction(row_gpios[row_idx], 1); | 
 | 354 | 		} | 
 | 355 | 	} | 
 | 356 |  | 
 | 357 | 	setup_timer(&omap_kp->timer, omap_kp_timer, (unsigned long)omap_kp); | 
 | 358 |  | 
 | 359 | 	/* get the irq and init timer*/ | 
 | 360 | 	tasklet_enable(&kp_tasklet); | 
 | 361 | 	kp_tasklet.data = (unsigned long) omap_kp; | 
 | 362 |  | 
 | 363 | 	ret = device_create_file(&pdev->dev, &dev_attr_enable); | 
 | 364 | 	if (ret < 0) | 
 | 365 | 		goto err2; | 
 | 366 |  | 
 | 367 | 	/* setup input device */ | 
 | 368 | 	set_bit(EV_KEY, input_dev->evbit); | 
 | 369 | 	for (i = 0; keymap[i] != 0; i++) | 
 | 370 | 		set_bit(keymap[i] & KEY_MAX, input_dev->keybit); | 
 | 371 | 	input_dev->name = "omap-keypad"; | 
 | 372 | 	input_dev->phys = "omap-keypad/input0"; | 
 | 373 | 	input_dev->cdev.dev = &pdev->dev; | 
 | 374 | 	input_dev->private = omap_kp; | 
 | 375 |  | 
 | 376 | 	input_dev->id.bustype = BUS_HOST; | 
 | 377 | 	input_dev->id.vendor = 0x0001; | 
 | 378 | 	input_dev->id.product = 0x0001; | 
 | 379 | 	input_dev->id.version = 0x0100; | 
 | 380 |  | 
 | 381 | 	input_dev->keycode = keymap; | 
 | 382 | 	input_dev->keycodesize = sizeof(unsigned int); | 
 | 383 | 	input_dev->keycodemax = pdata->keymapsize; | 
 | 384 |  | 
 | 385 | 	ret = input_register_device(omap_kp->input); | 
 | 386 | 	if (ret < 0) { | 
 | 387 | 		printk(KERN_ERR "Unable to register omap-keypad input device\n"); | 
 | 388 | 		goto err3; | 
 | 389 | 	} | 
 | 390 |  | 
 | 391 | 	if (pdata->dbounce) | 
 | 392 | 		omap_writew(0xff, OMAP_MPUIO_BASE + OMAP_MPUIO_GPIO_DEBOUNCING); | 
 | 393 |  | 
 | 394 | 	/* scan current status and enable interrupt */ | 
 | 395 | 	omap_kp_scan_keypad(omap_kp, keypad_state); | 
 | 396 | 	if (!cpu_is_omap24xx()) { | 
 | 397 | 		omap_kp->irq = platform_get_irq(pdev, 0); | 
 | 398 | 		if (omap_kp->irq >= 0) { | 
 | 399 | 			if (request_irq(omap_kp->irq, omap_kp_interrupt, 0, | 
 | 400 | 					"omap-keypad", omap_kp) < 0) | 
 | 401 | 				goto err4; | 
 | 402 | 		} | 
 | 403 | 		omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 404 | 	} else { | 
 | 405 | 		for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { | 
 | 406 | 			if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), | 
 | 407 | 				       	omap_kp_interrupt, | 
 | 408 | 					IRQF_TRIGGER_FALLING, | 
 | 409 | 				       	"omap-keypad", omap_kp) < 0) | 
 | 410 | 				goto err5; | 
 | 411 | 		} | 
 | 412 | 	} | 
 | 413 | 	return 0; | 
 | 414 | err5: | 
 | 415 | 	for (i = irq_idx-1; i >=0; i--) | 
 | 416 | 		free_irq(row_gpios[i], 0); | 
 | 417 | err4: | 
 | 418 | 	input_unregister_device(omap_kp->input); | 
 | 419 | 	input_dev = NULL; | 
 | 420 | err3: | 
 | 421 | 	device_remove_file(&pdev->dev, &dev_attr_enable); | 
 | 422 | err2: | 
 | 423 | 	for (i = row_idx-1; i >=0; i--) | 
 | 424 | 		omap_free_gpio(row_gpios[i]); | 
 | 425 | err1: | 
 | 426 | 	for (i = col_idx-1; i >=0; i--) | 
 | 427 | 		omap_free_gpio(col_gpios[i]); | 
 | 428 |  | 
 | 429 | 	kfree(omap_kp); | 
 | 430 | 	input_free_device(input_dev); | 
 | 431 |  | 
 | 432 | 	return -EINVAL; | 
 | 433 | } | 
 | 434 |  | 
 | 435 | static int omap_kp_remove(struct platform_device *pdev) | 
 | 436 | { | 
 | 437 | 	struct omap_kp *omap_kp = platform_get_drvdata(pdev); | 
 | 438 |  | 
 | 439 | 	/* disable keypad interrupt handling */ | 
 | 440 | 	tasklet_disable(&kp_tasklet); | 
 | 441 | 	if (cpu_is_omap24xx()) { | 
 | 442 | 		int i; | 
 | 443 | 		for (i = 0; i < omap_kp->cols; i++) | 
 | 444 | 	    		omap_free_gpio(col_gpios[i]); | 
 | 445 | 		for (i = 0; i < omap_kp->rows; i++) { | 
 | 446 | 	    		omap_free_gpio(row_gpios[i]); | 
 | 447 | 			free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); | 
 | 448 | 		} | 
 | 449 | 	} else { | 
 | 450 | 		omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); | 
 | 451 | 		free_irq(omap_kp->irq, 0); | 
 | 452 | 	} | 
 | 453 |  | 
 | 454 | 	del_timer_sync(&omap_kp->timer); | 
 | 455 | 	tasklet_kill(&kp_tasklet); | 
 | 456 |  | 
 | 457 | 	/* unregister everything */ | 
 | 458 | 	input_unregister_device(omap_kp->input); | 
 | 459 |  | 
 | 460 | 	kfree(omap_kp); | 
 | 461 |  | 
 | 462 | 	return 0; | 
 | 463 | } | 
 | 464 |  | 
 | 465 | static struct platform_driver omap_kp_driver = { | 
 | 466 | 	.probe		= omap_kp_probe, | 
 | 467 | 	.remove		= omap_kp_remove, | 
 | 468 | 	.suspend	= omap_kp_suspend, | 
 | 469 | 	.resume		= omap_kp_resume, | 
 | 470 | 	.driver		= { | 
 | 471 | 		.name	= "omap-keypad", | 
 | 472 | 	}, | 
 | 473 | }; | 
 | 474 |  | 
 | 475 | static int __devinit omap_kp_init(void) | 
 | 476 | { | 
 | 477 | 	printk(KERN_INFO "OMAP Keypad Driver\n"); | 
 | 478 | 	return platform_driver_register(&omap_kp_driver); | 
 | 479 | } | 
 | 480 |  | 
 | 481 | static void __exit omap_kp_exit(void) | 
 | 482 | { | 
 | 483 | 	platform_driver_unregister(&omap_kp_driver); | 
 | 484 | } | 
 | 485 |  | 
 | 486 | module_init(omap_kp_init); | 
 | 487 | module_exit(omap_kp_exit); | 
 | 488 |  | 
 | 489 | MODULE_AUTHOR("Timo Teräs"); | 
 | 490 | MODULE_DESCRIPTION("OMAP Keypad Driver"); | 
 | 491 | MODULE_LICENSE("GPL"); |