| Anatolij Gustschin | 56ebc06 | 2012-08-29 21:31:08 +0000 | [diff] [blame] | 1 | /* | 
 | 2 |  * O2D base Device Tree Source | 
 | 3 |  * | 
 | 4 |  * Copyright (C) 2012 DENX Software Engineering | 
 | 5 |  * Anatolij Gustschin <agust@denx.de> | 
 | 6 |  * | 
 | 7 |  * This program is free software; you can redistribute  it and/or modify it | 
 | 8 |  * under  the terms of  the GNU General  Public License as published by the | 
 | 9 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 | 10 |  * option) any later version. | 
 | 11 |  */ | 
 | 12 |  | 
 | 13 | /include/ "mpc5200b.dtsi" | 
 | 14 |  | 
 | 15 | / { | 
 | 16 | 	model = "ifm,o2d"; | 
 | 17 | 	compatible = "ifm,o2d"; | 
 | 18 |  | 
 | 19 | 	memory { | 
 | 20 | 		reg = <0x00000000 0x04000000>;	// 64MB | 
 | 21 | 	}; | 
 | 22 |  | 
 | 23 | 	soc5200@f0000000 { | 
 | 24 |  | 
 | 25 | 		gpio_simple: gpio@b00 { | 
 | 26 | 		}; | 
 | 27 |  | 
 | 28 | 		timer@600 {	// General Purpose Timer | 
 | 29 | 			#gpio-cells = <2>; | 
 | 30 | 			gpio-controller; | 
 | 31 | 			fsl,has-wdt; | 
 | 32 | 			fsl,wdt-on-boot = <0>; | 
 | 33 | 		}; | 
 | 34 |  | 
 | 35 | 		timer@610 { | 
 | 36 | 			#gpio-cells = <2>; | 
 | 37 | 			gpio-controller; | 
 | 38 | 		}; | 
 | 39 |  | 
 | 40 | 		timer7: timer@670 { | 
 | 41 | 		}; | 
 | 42 |  | 
 | 43 | 		rtc@800 { | 
 | 44 | 			status = "disabled"; | 
 | 45 | 		}; | 
 | 46 |  | 
 | 47 | 		psc@2000 {		// PSC1 | 
 | 48 | 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; | 
 | 49 | 			#address-cells = <1>; | 
 | 50 | 			#size-cells = <0>; | 
 | 51 | 			cell-index = <0>; | 
 | 52 |  | 
 | 53 | 			spidev@0 { | 
 | 54 | 				compatible = "spidev"; | 
 | 55 | 				spi-max-frequency = <250000>; | 
 | 56 | 				reg = <0>; | 
 | 57 | 			}; | 
 | 58 | 		}; | 
 | 59 |  | 
 | 60 | 		psc@2200 {		// PSC2 | 
 | 61 | 			status = "disabled"; | 
 | 62 | 		}; | 
 | 63 |  | 
 | 64 | 		psc@2400 {		// PSC3 | 
 | 65 | 			status = "disabled"; | 
 | 66 | 		}; | 
 | 67 |  | 
 | 68 | 		psc@2600 {		// PSC4 | 
 | 69 | 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
 | 70 | 		}; | 
 | 71 |  | 
 | 72 | 		psc@2800 {		// PSC5 | 
 | 73 | 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
 | 74 | 		}; | 
 | 75 |  | 
 | 76 | 		psc@2c00 {		// PSC6 | 
 | 77 | 			status = "disabled"; | 
 | 78 | 		}; | 
 | 79 |  | 
 | 80 | 		ethernet@3000 { | 
 | 81 | 			phy-handle = <&phy0>; | 
 | 82 | 		}; | 
 | 83 |  | 
 | 84 | 		mdio@3000 { | 
 | 85 | 			phy0: ethernet-phy@0 { | 
 | 86 | 				reg = <0>; | 
 | 87 | 			}; | 
 | 88 | 		}; | 
 | 89 |  | 
 | 90 | 		sclpc@3c00 { | 
 | 91 | 			compatible = "fsl,mpc5200-lpbfifo"; | 
 | 92 | 			reg = <0x3c00 0x60>; | 
 | 93 | 			interrupts = <3 23 0>; | 
 | 94 | 		}; | 
 | 95 | 	}; | 
 | 96 |  | 
 | 97 | 	localbus { | 
 | 98 | 		ranges = <0 0 0xff000000 0x01000000 | 
 | 99 | 			  3 0 0xe3000000 0x00100000>; | 
 | 100 |  | 
 | 101 | 		// flash device at LocalPlus Bus CS0 | 
 | 102 | 		flash@0,0 { | 
 | 103 | 			compatible = "cfi-flash"; | 
 | 104 | 			reg = <0 0 0x01000000>; | 
 | 105 | 			bank-width = <1>; | 
 | 106 | 			device-width = <2>; | 
 | 107 | 			#size-cells = <1>; | 
 | 108 | 			#address-cells = <1>; | 
 | 109 | 			no-unaligned-direct-access; | 
 | 110 |  | 
 | 111 | 			/* common layout for all machines */ | 
 | 112 | 			partition@0 { | 
 | 113 | 				label = "u-boot"; | 
 | 114 | 				reg = <0x00000000 0x00040000>; | 
 | 115 | 				read-only; | 
 | 116 | 			}; | 
 | 117 | 			partition@40000 { | 
 | 118 | 				label = "env"; | 
 | 119 | 				reg = <0x00040000 0x00020000>; | 
 | 120 | 				read-only; | 
 | 121 | 			}; | 
 | 122 | 		}; | 
 | 123 |  | 
 | 124 | 		csi@3,0 { | 
 | 125 | 			compatible = "ifm,o2d-csi"; | 
 | 126 | 			reg = <3 0 0x00100000>; | 
 | 127 | 			ifm,csi-clk-handle = <&timer7>; | 
 | 128 | 			gpios = <&gpio_simple 23 0	/* imag_capture */ | 
 | 129 | 				 &gpio_simple 26 0	/* imag_reset */ | 
 | 130 | 				 &gpio_simple 29 0>;	/* imag_master_en */ | 
 | 131 |  | 
 | 132 | 			interrupts = <1 1 2>;		/* IRQ1, edge falling */ | 
 | 133 |  | 
 | 134 | 			ifm,csi-addr-bus-width = <24>; | 
 | 135 | 			ifm,csi-data-bus-width = <8>; | 
 | 136 | 			ifm,csi-wait-cycles = <0>; | 
 | 137 | 		}; | 
 | 138 | 	}; | 
 | 139 | }; |