)]}'
{
  "log": [
    {
      "commit": "aa0170fff3c26bf2b42159af2dd9cf86444c292a",
      "tree": "0a64674f2fa51883c66e96c743dd4c4e86d98a49",
      "parents": [
        "cd07202cc8262e1669edff0d97715f3dd9260917"
      ],
      "author": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Sun Oct 17 14:09:12 2010 +0200"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Sun Oct 17 14:09:12 2010 +0200"
      },
      "message": "firewire: ohci: fix TI TSB82AA2 regression since 2.6.35\n\nRevert commit 54672386ccf36ffa21d1de8e75624af83f9b0eeb\n\"firewire: ohci: fix up configuration of TI chips\".\nIt caused massive slow-down and data corruption with a TSB82AA2 based\nStarTech EC1394B2 ExpressCard and FireWire 800 harddisks.\n\nhttps://bugs.launchpad.net/ubuntu/+source/linux/+bug/657081\nhttp://thread.gmane.org/gmane.linux.kernel.firewire.user/4013\n\nThe fact that some card EEPROMs do not program these enhancements may be\nrelated to TSB81BA3 phy chip errata, if not to bugs of TSB82AA2 itself.\nWe could re-add these configuration steps, but only conditional on a\nwhitelist of cards on which these enhancements bring a proven positive\neffect.\n\nReported-and-tested-by: Eric Shattow \u003clucent@gmail.com\u003e\nCc: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nCc: \u003cstable@kernel.org\u003e 2.6.35\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "4ffb7a6a066e4be4577976d1c08e237c7479770a",
      "tree": "fd4c275e8ef894d60602e1b4d1f81150e54b32f8",
      "parents": [
        "3d1f46eb60b155c705e389ecdf313f11b4b91976"
      ],
      "author": {
        "name": "Clemens Ladisch",
        "email": "clemens@ladisch.de",
        "time": "Thu Jun 10 08:36:37 2010 +0200"
      },
      "committer": {
        "name": "Clemens Ladisch",
        "email": "clemens@ladisch.de",
        "time": "Thu Jun 10 08:36:37 2010 +0200"
      },
      "message": "firewire: add CSR cmstr support\n\nImplement the cmstr bit, which is required for cycle master capable\nnodes and tested for by the Base 1394 Test Suite.\n\nThis bit allows the bus master to disable cycle start packets; there are\nbus master implementations that actually do this.\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\n"
    },
    {
      "commit": "54672386ccf36ffa21d1de8e75624af83f9b0eeb",
      "tree": "4151332eab6070ffcda77012a3afc99e15425b5b",
      "parents": [
        "925e7a6504966b838c519f009086982c68e0666f"
      ],
      "author": {
        "name": "Clemens Ladisch",
        "email": "clemens@ladisch.de",
        "time": "Thu Apr 01 16:43:59 2010 +0200"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Sat Apr 10 16:51:14 2010 +0200"
      },
      "message": "firewire: ohci: fix up configuration of TI chips\n\nOn TI chips (OHCI-Lynx and later), enable link enhancements features\nthat TI recommends to be used.  None of these are required for proper\noperation, but they are safe and nice to have.\n\nIn theory, these bits should have been set by default, but in practice,\nsome BIOS/EEPROM writers apparently do not read the datasheet, or get\nspooked by names like \"unfair\".\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "925e7a6504966b838c519f009086982c68e0666f",
      "tree": "38ead3a8ae51b973156f6238f7c6b3800d3d7d46",
      "parents": [
        "e7014dada041982ae12ba7fd1967ca0ab0243e04"
      ],
      "author": {
        "name": "Clemens Ladisch",
        "email": "clemens@ladisch.de",
        "time": "Sun Apr 04 15:19:54 2010 +0200"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Sat Apr 10 16:51:14 2010 +0200"
      },
      "message": "firewire: ohci: enable 1394a enhancements\n\nThe OHCI spec says that, if the programPhyEnable bit is set, the driver\nis responsible for configuring the IEEE1394a enhancements within the PHY\nand the link consistently.  So do this.\n\nAlso add a quirk to allow disabling these enhancements; this is needed\nfor the TSB12LV22 where ack accelerations are buggy (erratum b).\n\nSigned-off-by: Clemens Ladisch \u003cclemens@ladisch.de\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "77c9a5daa9c4d9b37812c9c69c7bcbb3f9399c3c",
      "tree": "54ea3c48e0663ef1b9f227ffff7710f0ea03f9a1",
      "parents": [
        "e8ca97021c8eb127bb04aec4e2420e1d66be371d"
      ],
      "author": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Jun 05 16:26:18 2009 +0200"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Jun 05 16:26:18 2009 +0200"
      },
      "message": "firewire: reorganize header files\n\nThe three header files of firewire-core, i.e.\n \"drivers/firewire/fw-device.h\",\n \"drivers/firewire/fw-topology.h\",\n \"drivers/firewire/fw-transaction.h\",\nare replaced by\n \"drivers/firewire/core.h\",\n \"include/linux/firewire.h\".\n\nThe latter includes everything which a firewire high-level driver (like\nfirewire-sbp2) needs besides linux/firewire-constants.h, while core.h\ncontains the rest which is needed by firewire-core itself and by low-\nlevel drivers (card drivers) like firewire-ohci.\n\nHigh-level drivers can now also reside outside of drivers/firewire\nwithout having to add drivers/firewire to the header file search path in\nmakefiles.  At least the firedtv driver will be such a driver.\n\nI also considered to spread the contents of core.h over several files,\none for each .c file where the respective implementation resides.  But\nit turned out that most core .c files will end up including most of the\ncore .h files.  Also, the combined core.h isn\u0027t unreasonably big, and it\nwill lose more of its contents to linux/firewire.h anyway soon when more\nfirewire drivers are added.  (IP-over-1394, firedtv, and there are plans\nfor one or two more.)\n\nFurthermore, fw-ohci.h is renamed to ohci.h.  The name of core.h and\nohci.h is chosen with regard to name changes of the .c files in a\nfollow-up change.\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "75f7832e3b032c6e4a83c14b58341abd9f2d81ef",
      "tree": "25ee08f7433450ed1b85362c8fe5b244567217de",
      "parents": [
        "022147242ff6e4b7ab770f00716063f48c088391"
      ],
      "author": {
        "name": "Jarod Wilson",
        "email": "jwilson@redhat.com",
        "time": "Thu Apr 03 17:18:23 2008 -0400"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Apr 18 17:55:34 2008 +0200"
      },
      "message": "firewire: fw-ohci: log regAccessFail events\n\nWhile trying to debug this piece of crap JMicron PCI-e controller in my\npossession, one thought was that perhaps I was encountering register access\nfailures. I\u0027m not, but logging them would be good, so we can see if they\nare a real problem we should be taking into account anywhere in the code.\n\nSigned-off-by: Jarod Wilson \u003cjwilson@redhat.com\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e (added list contact)\n"
    },
    {
      "commit": "c8a9a498e16b2a6c0e4e367b1a01f80fdfd7b6e2",
      "tree": "f8e7fdab0bc3eefc98d6c0a09ab02337b6090371",
      "parents": [
        "2ed0f181f0d18d2f565bfbd259fe33d53769f72b"
      ],
      "author": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Wed Mar 19 21:40:32 2008 +0100"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Apr 18 17:55:33 2008 +0200"
      },
      "message": "firewire: fw-ohci: add self ID error check\n\nDiscard self ID buffer contents if\n  - the selfIDError flag is set,\n  - any of the self ID packets has bit errors.\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\nSigned-off-by: Jarod Wilson \u003cjwilson@redhat.com\u003e\n"
    },
    {
      "commit": "02ff8f8ee151e880414b99a11f67cae0cecd4977",
      "tree": "bafdb5af973e0010fb46ea21a2c4f4550a5d8a4d",
      "parents": [
        "ab88ca488b8af66c3defa165874e81e695319a19"
      ],
      "author": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Thu Aug 30 00:11:40 2007 +0200"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Wed Oct 17 00:00:08 2007 +0200"
      },
      "message": "firewire: fw-ohci: check for misconfigured bus (phyID \u003d\u003d 63)\n\nCheck NodeID.nodeNumber as per OHCI 1.1 clause 7.2.3.2.  See also IEEE\n1394a table 5B-1.\n\nAlso, demote the \"node ID not valid\" message from error to notification\nas it is not an error condition.\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "295e3feb92e5073ec32a3c626302d4b92c4c8a95",
      "tree": "58c581080526c4b27401d3c2f4e52595d78cc4e8",
      "parents": [
        "30200739e612932739cc34baf588b39bacc2f427"
      ],
      "author": {
        "name": "Kristian Høgsberg",
        "email": "krh@redhat.com",
        "time": "Fri Feb 16 17:34:40 2007 -0500"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Mar 09 22:02:58 2007 +0100"
      },
      "message": "firewire: Implement basic isochronous receive functionality.\n\nSigned-off-by: Kristian Høgsberg \u003ckrh@redhat.com\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    },
    {
      "commit": "5e20c282184fd5794661b6688883231ff5348abc",
      "tree": "d9ea9b86d5e2bcc4ef4d8def27102a76ac4b05ef",
      "parents": [
        "95688e97cdf7453cde22eaa73cc2ab6b113c1853"
      ],
      "author": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Sun Jan 21 20:44:09 2007 +0100"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Mar 09 22:02:40 2007 +0100"
      },
      "message": "firewire: whitespace adjustments\n\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\nSigned-off-by: Kristian Høgsberg \u003ckrh@redhat.com\u003e\n"
    },
    {
      "commit": "ed5689122f4cdb5cb8c6770ad1a2c8561b32d9b3",
      "tree": "e2f45d88370663642bb186d95d075a3b410525fd",
      "parents": [
        "19a15b937b26638933307bb02f7b1801310d6eb2"
      ],
      "author": {
        "name": "Kristian Høgsberg",
        "email": "krh@redhat.com",
        "time": "Tue Dec 19 19:58:35 2006 -0500"
      },
      "committer": {
        "name": "Stefan Richter",
        "email": "stefanr@s5r6.in-berlin.de",
        "time": "Fri Mar 09 22:02:34 2007 +0100"
      },
      "message": "firewire: Add driver for OHCI firewire host controllers.\n\nSigned-off-by: Kristian Høgsberg \u003ckrh@redhat.com\u003e\nSigned-off-by: Stefan Richter \u003cstefanr@s5r6.in-berlin.de\u003e\n"
    }
  ]
}