)]}'
{
  "log": [
    {
      "commit": "21ebd6c68b5511b55f4f456e4ba17c2d711e3617",
      "tree": "2f4f98568a7a52ab6734fb190d0cbf6f9c1c6492",
      "parents": [
        "4b8be38cf782f8ebebc089083fa0572ade79d7ca",
        "74d836c4142e5d100f8d9a1b2ee3003c2ed7109d"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 13 20:43:32 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Fri Jan 13 20:43:32 2012 -0800"
      },
      "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits)\n  rtc: max8925: Add function to work as wakeup source\n  mfd: Add pm ops to max8925\n  mfd: Convert aat2870 to dev_pm_ops\n  mfd: Still check other interrupts if we get a wm831x touchscreen IRQ\n  mfd: Introduce missing kfree in 88pm860x probe routine\n  mfd: Add S5M series configuration\n  mfd: Add s5m series irq driver\n  mfd: Add S5M core driver\n  mfd: Improve mc13xxx dt binding document\n  mfd: Fix stmpe section mismatch\n  mfd: Fix stmpe build warning\n  mfd: Fix STMPE I2c build failure\n  mfd: Constify aat2870-core i2c_device_id table\n  gpio: Add support for stmpe variant 801\n  mfd: Add support for stmpe variant 801\n  mfd: Add support for stmpe variant 610\n  mfd: Add support for STMPE SPI interface\n  mfd: Separate out STMPE controller and interface specific code\n  misc: Remove max8997-muic sysfs attributes\n  mfd: Remove unused wm831x_irq_data_to_mask_reg()\n  ...\n\nFix up trivial conflict in drivers/leds/Kconfig due to addition of\nLEDS_MAX8997 and LEDS_TCA6507 next to each other.\n"
    },
    {
      "commit": "0c4eae66591a292fee70051ea363a8d27aa54102",
      "tree": "8dce311ce5149432eee9e55a2a7f4c58aaa239fa",
      "parents": [
        "5f85d20d04cdc4c6ed15022a5ed76907ad88d4ae"
      ],
      "author": {
        "name": "Axel Lin",
        "email": "axel.lin@gmail.com",
        "time": "Tue Jan 10 15:10:48 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jan 10 16:30:53 2012 -0800"
      },
      "message": "rtc: convert drivers/rtc/* to use module_platform_driver()\n\nThis patch converts the drivers in drivers/rtc/* to use the\nmodule_platform_driver() macro which makes the code smaller and a bit\nsimpler.\n\nSigned-off-by: Axel Lin \u003caxel.lin@gmail.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nAcked-by: Guan Xuetao \u003cgxt@mprc.pku.edu.cn\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nAcked-by: Haojian Zhuang \u003chaojian.zhuang@gmail.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Lars-Peter Clausen \u003clars@metafoo.de\u003e\nCc: Ben Dooks \u003cben@simtec.co.uk\u003e\nCc: John Stultz \u003cjohn.stultz@linaro.org\u003e\nAcked-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "dda367ac064d7473d397b1965019fb3be7cfb6b0",
      "tree": "332b14ebfc6340c6941be7ec64250093ee631f3d",
      "parents": [
        "012e52e15e7ebbc7b08165e8f4b10f71a3e6810b"
      ],
      "author": {
        "name": "Mark Godfrey",
        "email": "mark.godfrey@stericsson.com",
        "time": "Tue Jan 10 15:10:42 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jan 10 16:30:52 2012 -0800"
      },
      "message": "rtc/ab8500: add calibration attribute to AB8500 RTC\n\nThe rtc_calibration attribute allows user-space to get and set the\nAB8500\u0027s RtcCalibration register.  The AB8500 will then use the value in\nthis register to compensate for RTC drift every 60 seconds.\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Mark Godfrey \u003cmark.godfrey@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "012e52e15e7ebbc7b08165e8f4b10f71a3e6810b",
      "tree": "83b34597c52f4bb13f9a7341321e5cc7cedf5680",
      "parents": [
        "b62581e6241c33b9fef45117f86830058738371f"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Tue Jan 10 15:10:41 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jan 10 16:30:52 2012 -0800"
      },
      "message": "drivers/rtc/rtc-ab8500.c: change msleep() to usleep_range()\n\nThe resolution of msleep is related to HZ, so with HZ set to 100 any\nmsleep of less than 10ms will become ~10ms.  This is not what we want.\nUse the hrtimer-based usleep_range() and allow for some slack in the\nnon-critical path so we have more control of what is happening here.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Jonas Aaberg \u003cjonas.aberg@stericsson.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Jean-Christophe PLAGNIOL-VILLARD \u003cplagnioj@jcrosoft.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "b62581e6241c33b9fef45117f86830058738371f",
      "tree": "41507fcead5502264742448d13c0a2552d6fa03a",
      "parents": [
        "10d065e65b0be33e868f9c6da67026b5111480d8"
      ],
      "author": {
        "name": "Andrew Lynn",
        "email": "andrew.lynn@stericsson.com",
        "time": "Tue Jan 10 15:10:38 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jan 10 16:30:52 2012 -0800"
      },
      "message": "rtc/ab8500: set can_wake flag\n\nSet can_wake flag so wakealarm property is visible in sysfs.\n\nSigned-off-by: Andrew Lynn \u003candrew.lynn@stericsson.com\u003e\nReviewed-by: Jonas ABERG \u003cjonas.aberg@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "10d065e65b0be33e868f9c6da67026b5111480d8",
      "tree": "8cd847ee24e44791c9d214af5ad6772072872c5f",
      "parents": [
        "c92182ee0b5a33c74e4b6c0ded36166e4ef3bc3e"
      ],
      "author": {
        "name": "Robert Marklund",
        "email": "robert.marklund@stericsson.com",
        "time": "Tue Jan 10 15:10:35 2012 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jan 10 16:30:52 2012 -0800"
      },
      "message": "rtc/ab8500: don\u0027t disable IRQ:s when suspending\n\nWe want this driver to be able to wake up the system.\n\nSigned-off-by: Robert Marklund \u003crobert.marklund@stericsson.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "ee66e653ca7425bc8ffca4e00f19a8057cd14e4d",
      "tree": "e566da76e2588bc4871df677063f302213be0427",
      "parents": [
        "83051b7287e43241ccb6adaaa92615a87274898b"
      ],
      "author": {
        "name": "Linus Walleij",
        "email": "linus.walleij@linaro.org",
        "time": "Fri Dec 02 14:16:33 2011 +0100"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Mon Jan 09 00:37:39 2012 +0100"
      },
      "message": "mfd: Unify abx500 headers in mfd/abx500\n\nThis moves all the header files related to the abx500 family into\na common include directory below mfd. From now on we place any\nsubchip header in that directory. Headers previously in e.g.\n\u003clinux/mfd/ab8500/gpio.h\u003e get prefixed and are now e.g.\n\u003clinux/mfd/abx500/ab8500-gpio.h\u003e. The top-level abstract interface\nremains in \u003clinux/mfd/abx500.h\u003e.\n\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "47c1697508f2ec9f6b31ce6c825fe1017871dea6",
      "tree": "e22afa146c3232802abf482caa167e0e2444093b",
      "parents": [
        "f4ebcab36088d45a5e8889e9b63d77e01c808076"
      ],
      "author": {
        "name": "Mattias Wallin",
        "email": "mattias.wallin@stericsson.com",
        "time": "Fri Sep 10 17:47:56 2010 +0200"
      },
      "committer": {
        "name": "Samuel Ortiz",
        "email": "sameo@linux.intel.com",
        "time": "Fri Oct 29 00:29:19 2010 +0200"
      },
      "message": "mfd: Align ab8500 with the abx500 interface\n\nThis patch makes the ab8500 mixed signal chip expose the same\ninterface for register access as the ab3100, ab3550 and ab5500 chip.\nThe ab8500_read() and ab8500_write() is removed and replaced with\nabx500_get_register_interruptible() and\nabx500_set_register_interruptible().\n\nSigned-off-by: Mattias Wallin \u003cmattias.wallin@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n"
    },
    {
      "commit": "0af62f4d1eedaacf6a85e293958699540d09fa3e",
      "tree": "abbd784885f7fe3632c3246da61999dfc95639af",
      "parents": [
        "7ca5ca60cba37fc4d8e99583da147faed3039ad0"
      ],
      "author": {
        "name": "Virupax Sadashivpetimath",
        "email": "virupax.sadashivpetimath@stericsson.com",
        "time": "Wed May 26 14:42:14 2010 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu May 27 09:12:41 2010 -0700"
      },
      "message": "rtc: AB8500 RTC driver\n\nAdd a driver for the RTC on the AB8500 power management chip.  This is a\nclient of the AB8500 MFD driver.\n\nSigned-off-by: Virupax Sadashivpetimath \u003cvirupax.sadashivpetimath@stericsson.com\u003e\nSigned-off-by: Rabin Vincent \u003crabin.vincent@stericsson.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@stericsson.com\u003e\nAcked-by: Srinidhi Kasagar \u003csrinidhi.kasagar@stericsson.com\u003e\nCc: Alessandro Zummo \u003ca.zummo@towertech.it\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    }
  ]
}