)]}' { "log": [ { "commit": "cd6c65981e72aef9f5cc42ffe64404542162790a", "tree": "b57dfa02a6bf1b01f0f19489f90da0a84e3879ba", "parents": [ "294a20e039a5125b0e88b96e0ee47065ff4e07a5" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu May 10 21:27:18 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 16 13:08:16 2012 -0400" }, "message": "nl80211: refactor valid channel type check\n\nThere are four instances in nl80211 of getting the\nchannel type from the attribute and validating it,\nrefactor those.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3383b5a69de59eeef2501834c6e0960b7e2bff28", "tree": "08dd59ffc3e6b53ab59b2da27fcaecbe51092b23", "parents": [ "bdbc59b35f2a66cdd9465f573f865cc2109ab33d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu May 10 20:14:43 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed May 16 13:08:15 2012 -0400" }, "message": "nl80211: prevent additions to old station flags API\n\nWe don\u0027t really want/need to maintain the old\nstation flags API any more, so refuse changes\nto new (not yet defined) flags from the old\nflags API.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "70c33eaae79e53f9e48324736c0cb85534d3f093", "tree": "103c59d0356e55341052adca0624b6256525ddbb", "parents": [ "b91e64aad2c78b0477b9eb3a26335668b4032002" ], "author": { "name": "Ashok Nagarajan", "email": "ashok@cozybit.com", "time": "Mon Apr 30 14:20:32 2012 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue May 08 21:53:59 2012 -0400" }, "message": "{nl,cfg,mac}80211: Allow user to see/configure HT protection mode\n\nThis patch introduces a new mesh configuration parameter \"ht_opmode\" and will\nallow user to check the current HT protection mode selected. Users could\nconfigure the protection mode by the command \"iw mesh_iface set mesh_param\nmesh_ht_protection_mode\u003d2\". The default protection mode of mesh is set to\nnon-HT mixed mode.\n\nSigned-off-by: Ashok Nagarajan \u003cashok@cozybit.com\u003e\nReviewed-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d9b8ae6bd8c3304569a25079fcdbebaa28a48ee4", "tree": "9ce3e4eb355685f970dd7333a0a935109aff0583", "parents": [ "872f24dbc604ef585ea7eec73020dcdfaffd1956", "94c514fe240fc0dd02187b78facefde8b6744634" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 26 15:03:48 2012 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 26 15:03:48 2012 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-testmode.c\n" }, { "commit": "218d2e26dceb241e4b253c5c4702ee1b38b715cc", "tree": "3ae9e3da50fc6ed24ab12c2c6ea7d1e2516bef08", "parents": [ "0d8a0a17288e419c2e5e9ce18c8b66b390eb7e23" ], "author": { "name": "Bala Shanmugam", "email": "bkamatch@qca.qualcomm.com", "time": "Fri Apr 20 19:12:58 2012 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 23 15:37:41 2012 -0400" }, "message": "cfg80211: Validate legacy rateset.\n\nLegacy rates are not validated while configuring\ntx rateset using iw. So below cmd is accepted by nl80211.\nsudo iw wlan2 set bitrates legacy-2.4 1 2 3\n\nValidate legacy rates and return\nerror if any rate in the rateset is not valid.\n\nSigned-off-by: Bala Shanmugam \u003cbkamatch@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "59ef43e681d103a51c3727dad0315e093f07ec61", "tree": "87f6320f1440ce3ce6c0c15ad3cef8bc98186f88", "parents": [ "91fbe33034c184c6a60e31c2207a2f7ec2f180dc", "b5abcf0219263f4e961dca71cbe26e06c5b0ee68" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 18 14:17:13 2012 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 18 14:27:48 2012 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-testmode.c\n\tinclude/net/nfc/nfc.h\n\tnet/nfc/netlink.c\n\tnet/wireless/nl80211.c\n" }, { "commit": "d91df0e3a1b9a7427785cb8d28be073df9b18b78", "tree": "ecaafaaf178a20fdcbe21fc5c8e586527ab45aa1", "parents": [ "3a4b43fde103da510d8962a073bb748706f426bd" ], "author": { "name": "Pontus Fuchs", "email": "pontus.fuchs@gmail.com", "time": "Tue Apr 03 16:39:58 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Apr 13 14:32:49 2012 -0400" }, "message": "cfg80211: Add channel information to NL80211_CMD_GET_INTERFACE\n\nIf the current channel is known, add frequency and channel type to\nNL80211_CMD_GET_INTERFACE.\n\nSigned-off-by: Pontus Fuchs \u003cpontus.fuchs@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7eab0f64a9eba5405222fdef0ede2468bf495efd", "tree": "ec99640b8d0b12adbfacb85c27683125debd14f2", "parents": [ "cade455596504fae8e134a27189713ddf7c6d04d", "8065248069097dddf9945acfb2081025e9618c16" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 12 14:25:14 2012 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 12 14:41:59 2012 -0400" }, "message": "Merge branch \u0027master\u0027 into for-davem\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-testmode.c\n\tnet/wireless/nl80211.c\n" }, { "commit": "8065248069097dddf9945acfb2081025e9618c16", "tree": "eddf3fb0372ba0f65c01382d386942ea8d18932d", "parents": [ "e66a8ddff72e85605f2212a0ebc666c7e9116641", "b4838d12e1f3cb48c2489a0b08733b5dbf848297" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 12 13:49:28 2012 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Apr 12 13:49:28 2012 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless\n" }, { "commit": "5314526b1743e8e8614293db7d86e480b4fe9824", "tree": "c493979d2d417b9a146ac6ef5e1b5562a5fda6df", "parents": [ "14dc7852099535d17807e348dd127433413b7e0a" ], "author": { "name": "Thomas Pedersen", "email": "c_tpeder@qca.qualcomm.com", "time": "Fri Apr 06 13:35:47 2012 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 11 16:23:59 2012 -0400" }, "message": "cfg80211: add channel switch notify event\n\nThe firmware may decide to switch channels while already beaconing, e.g.\nin response to a cfg80211 connect request on a different vif. Add this\nevent to notify userspace when an AP or GO interface has successfully\nmigrated to a new channel, so it can update its configuration\naccordingly.\n\nSigned-off-by: Thomas Pedersen \u003cc_tpeder@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6d52563f2bc217cbdccb97068f5b6176352f01f2", "tree": "27fb48e360f153129fadb4dd5abdb4d91bb2e7eb", "parents": [ "da951c2417ec1020d0d00813da36f38e395994e9" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Apr 04 15:05:25 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Apr 11 16:23:57 2012 -0400" }, "message": "cfg80211/mac80211: enable proper device_set_wakeup_enable handling\n\nIn WoWLAN, we only get the triggers when we actually get\nto suspend. As a consequence, drivers currently don\u0027t\nknow that the device should enable wakeup. However, the\ndevice_set_wakeup_enable() API is intended to be called\nwhen the wakeup is enabled, not later when needed.\n\nAdd a new set_wakeup() call to cfg80211 and mac80211 to\nallow drivers to properly call device_set_wakeup_enable.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d299a1f21ea7ffd5114d099b2f92c867c495e8b3", "tree": "4325e83c1ad096be0d2fa71c52d1ad115ea23ca4", "parents": [ "dbf498fbafa2c23139d5a990e94ed78bafbbea19" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Sat Mar 31 11:31:33 2012 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 10 15:20:33 2012 -0400" }, "message": "{nl,cfg}80211: Support for mesh synchronization\n\nReport Toffset to userspace.\nLet userspace select the mesh synchronization method.\n\nSigned-off-by: Marco Porsch \u003cmarco.porsch@s2005.tu-chemnitz.de\u003e\nSigned-off-by: Pavel Zubarev \u003cpavel.zubarev@gmail.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a3304b0a17495183a2270d4a25978795226597a4", "tree": "1b1f91ab191e77833b84232ba5a61d6a584b3cd6", "parents": [ "d748b4642a53cd1ead303f9e2b008295391466b7" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Mar 28 11:04:24 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Apr 10 14:54:09 2012 -0400" }, "message": "cfg80211/nl80211: clarify TX queue API\n\nWith the plan to change mac80211\u0027s queue API to\nnot map ACs to queues 1:1, it seems necessary to\nclarify some APIs that act on ACs rather than on\nqueues to spell that out explicitly. Do this.\n\nAlso verify that the AC number given is valid.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b5f8b0b44e17e625cfba1e7b88db44f4dcc0441", "tree": "fc33627d2022e848b881e88494a8e7dbab7643a4", "parents": [ "3f9768a5d262d01d317b2a03933db3d5082fcb68" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Apr 02 10:51:55 2012 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Apr 09 15:54:46 2012 -0400" }, "message": "nl80211: ensure interface is up in various APIs\n\nThe nl80211 handling code should ensure as much as\nit can that the interface is in a valid state, it\ncan certainly ensure the interface is running.\n\nNot doing so can cause calls through mac80211 into\nthe driver that result in warnings and unspecified\nbehaviour in the driver.\n\nCc: stable@vger.kernel.org\nReported-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9360ffd1859720f6520cf59241909b74dae369d0", "tree": "4a46b772addeec8a6f81ea0ab033bf98ed593ab7", "parents": [ "d0fde795d21d6271934f132557ce9542ceb358eb" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Mar 29 04:41:26 2012 -0400" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Apr 01 18:11:37 2012 -0400" }, "message": "wireless: Stop using NLA_PUT*().\n\nThese macros contain a hidden goto, and are thus extremely error\nprone and make code hard to audit.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "66266b3ab4871958ed6a1e43f502cadaf3becfc8", "tree": "202d9da52387cd9ea0997d79c9e83bed15a9fab1", "parents": [ "e92109be7a6a04808c3ed586475ba1e5ea56ecbd" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Mar 15 13:25:41 2012 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 26 15:07:25 2012 -0400" }, "message": "cfg80211: allow CFG80211_SIGNAL_TYPE_UNSPEC in station_info\n\nThe station_info struct had demanded dBm signal values, but the\ncfg80211 wireless extensions implementation was also accepting\n\"unspecified\" (i.e. RSSI) unit values while the nl80211 code was\ncompletely unaware of them. Resolve this by formally allowing the\n\"unspecified\" units while making nl80211 ignore them.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\n" }, { "commit": "4486ea987efdaa546bdda569e3dfacdc14a9fb13", "tree": "2d9a0bb6580772d483f7480469e6ce06f8f87bb3", "parents": [ "bff2ec2b916cc85628f3025e08660c0350f03650" ], "author": { "name": "Bala Shanmugam", "email": "bkamatch@qca.qualcomm.com", "time": "Wed Mar 07 17:27:12 2012 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 12 14:19:34 2012 -0400" }, "message": "cfg80211: Add background scan period attribute.\n\nReceive background scan period as part of connect\ncommand and pass the same to the driver.\n\nSigned-off-by: Bala Shanmugam \u003cbkamatch@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "804483e90794256f9ed53e795ffbf1e94de237c8", "tree": "22a4d8ade674bb42aaf4d3e878dfd6a73b618dcc", "parents": [ "769009b89d8c29c410a99eee3cd63764b1fff869" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Mar 05 22:18:41 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Mar 06 15:16:05 2012 -0500" }, "message": "cfg80211/mac80211: report signal strength for mgmt frames\n\nAdd the signal strength (in dBm only for now) to\nframes that are received via nl80211\u0027s various\nframe APIs.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nAcked-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b658f118b11de3c4052ed8cbdd5803cd1fa5670", "tree": "162160c05d29fc99b18d1914ffe2d614f2c9af6a", "parents": [ "d665508b98d3cdbeb476e7d6848a513184a81ed0" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vthiagar@qca.qualcomm.com", "time": "Fri Mar 02 15:50:02 2012 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 05 15:38:34 2012 -0500" }, "message": "cfg80211: Add an attribute to set inactivity timeout in AP mode\n\nThis patch adds an attribute, NL80211_ATTR_INACTIVITY_TIMEOUT,\nto set the inactivity timeout which can be used to remove the\nstation in AP mode. This can be passed in NL80211_CMD_START_AP\nand used by the drivers which have AP MLME in firmware but\ndon\u0027t support get_station() properly. To disable inactivity\ntimer in userspace, wpa_s for example, there is a new flag,\nNL80211_FEATURE_INACTIVITY_TIMER, in nl80211_feature_flags\nthrough which drivers can register their capability to use\nthe inactivity timeout to free the stations.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvthiagar@qca.qualcomm.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5533513784a88049e19dd2ab380a452b61e5171e", "tree": "8e48d0cf30f3e94475ee80479308e98908b3c0bc", "parents": [ "5809802180b2b638762465cbad3f51a9ac8ff0b3" ], "author": { "name": "Ashok Nagarajan", "email": "ashok@cozybit.com", "time": "Tue Feb 28 17:04:08 2012 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Mar 05 15:23:15 2012 -0500" }, "message": "{nl,cfg,mac}80211: Implement RSSI threshold for mesh peering\n\nMesh peer links are established only if average rssi of the peer\ncandidate satisfies the threshold. This is not in 802.11s specification\nbut was requested by David Fulgham, an open80211s user. This is a way to avoid\nmarginal peer links with stations that are barely within range.\n\nThis patch adds a new mesh configuration parameter, mesh_rssi_threshold. This\nfeature is supported only for hardwares that report signal in dBm.\n\nSigned-off-by: Ashok Nagarajan \u003cashok@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8860020e0be1f03d83dc9e9e93e18a4ddbe01038", "tree": "09fa9089770e8a42e913f6c11abbba04bec20fad", "parents": [ "4e3bc141d480661634d0fadad7dbb1ddde70b4d4" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Feb 13 15:17:18 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Feb 22 14:51:18 2012 -0500" }, "message": "cfg80211: restructure AP/GO mode API\n\nThe AP/GO mode API isn\u0027t very clearly defined, it\nhas \"set beacon\" and \"new beacon\" etc.\n\nModify the API to the following:\n * start AP -- all settings\n * change beacon -- new beacon data\n * stop AP -- stop AP mode operation\n\nThis also reflects in the nl80211 API, rename\nthe commands there correspondingly (but keep\nthe old names for compatibility.)\n\nOverall, this makes it much clearer what\u0027s going\non in the API.\n\nKalle developed the ath6kl changes, I created\nthe rest of the patch.\n\nSigned-off-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "910570b5f4dbf75b73389010704ca6442a767a41", "tree": "6c3c581f672492906ebf5b4c34adc307e06aa5a3", "parents": [ "d486a5b4996d2fffd10098725781f2c5690774bc" ], "author": { "name": "Dan Carpenter", "email": "dan.carpenter@oracle.com", "time": "Wed Feb 01 10:42:11 2012 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 06 14:55:41 2012 -0500" }, "message": "mac80211: off by one in mcs mask handling\n\n\"ridx\" is used as an index into the mcs_mask[] array which has\nIEEE80211_HT_MCS_MASK_LEN elements.\n\nSigned-off-by: Dan Carpenter \u003cdan.carpenter@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "267335d63b808dc861f3a4dc81a605489a8a13ac", "tree": "2f114b6f45147d17ea4cbd57cf33289a57248a1b", "parents": [ "3eda95de19e1781612091869e866a5014257f462" ], "author": { "name": "Antonio Quartulli", "email": "ordex@autistici.org", "time": "Tue Jan 31 20:25:47 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 06 14:53:10 2012 -0500" }, "message": "cfg80211/mac80211: userspace peer authorization in IBSS\n\nIf the IBSS network is RSN-protected, let userspace authorize the stations\ninstead of adding them as AUTHORIZED by default.\n\nSigned-off-by: Antonio Quartulli \u003cordex@autistici.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "95de817b9034d50860319f6033ec85d25024694c", "tree": "8dc100ec6a5ee527a6e86b33e904f5f9d14181ab", "parents": [ "7852e36186d2a1983c215836d7e3d7b8927c930d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Jan 20 13:55:25 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 06 14:50:37 2012 -0500" }, "message": "cfg80211: stop tracking authenticated state\n\nTo track authenticated state seems to have been\na design mistake in cfg80211. It is possible to\nhave out of band authentication (FT), tracking\nmultiple authentications caused more problems\nthan it ever helped, and the implementation in\nmac80211 is too complex.\n\nRemove all this complexity, and let userspace\ndo whatever it wants to, mac80211 can deal with\nthat just fine. Association is still tracked of\ncourse, but authentication no longer is. Local\nauth state changes are thus no longer of value,\nso ignore them completely.\n\nThis will also help implement SAE -- asking the\ndriver to do an authentication is now almost\nequivalent to sending an authentication frame,\nwith the exception of shared key authentication\nwhich is still handled completely.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "24db78c05b1e3ccb5a78aedd17aa1008c91dab5a", "tree": "f41babc8ada871a26619be23f983121ad557da91", "parents": [ "d273bb20c00340748e3ca9730f87524ec5abbd64" ], "author": { "name": "Simon Wunderlich", "email": "simon.wunderlich@s2003.tu-chemnitz.de", "time": "Sat Jan 28 17:25:32 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jan 30 15:48:25 2012 -0500" }, "message": "nl80211: add support for mcs masks\n\nAllow to set mcs masks through nl80211. We also allow to set MCS\nrates but no legacy rates (and vice versa).\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "94f9065648a2645b28187b44ec7778c30cf58758", "tree": "734ee883e3fbd99de04240da97716d773d64bb6d", "parents": [ "2da8f419e78a0ebccc91c095328278fe668a7932" ], "author": { "name": "Chun-Yeow Yeoh", "email": "yeohchunyeow@gmail.com", "time": "Sat Jan 21 01:02:16 2012 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 27 14:56:56 2012 -0500" }, "message": "{nl,cfg,mac}80211: Add support of setting non-forwarding entity in Mesh\n\nA mesh node that joins the mesh network is by default a forwarding entity. This patch allows\nthe mesh node to set as non-forwarding entity. Whenever dot11MeshForwarding is set to 0, the\nmesh node can prevent itself from forwarding the traffic which is not destined to him.\n\nSigned-off-by: Chun-Yeow Yeoh \u003cyeohchunyeow@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2da8f419e78a0ebccc91c095328278fe668a7932", "tree": "f2f9057a4f7e9476e047e812ccef347996378ef4", "parents": [ "8e7c4e4dc6e98a0d3ee4535c6b94a3ad63adad2a" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Jan 20 13:52:37 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 27 14:56:56 2012 -0500" }, "message": "cfg80211: fix a few -Wshadow warnings\n\nIt seems that -Wshadow is no longer default in\nsparse runs, but let\u0027s fix the warnings anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bdd3ae3d1e749cf6597f035a5357f297a1af8eb3", "tree": "919de2a3adaf00d99c9d3b726c2a47a75026540f", "parents": [ "1a19f77f3642b8194ad9cf55548cc5d92e841766" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Jan 02 13:30:03 2012 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jan 11 15:14:50 2012 -0500" }, "message": "nl80211: fix old station flags compatibility\n\nMy patch to validate station flags broke compatibility\nwith the old station flags setting where all flags are\nalways set at once since it always set the mask as all\npossible flags which ended up being rejected later in\nthe station add/modify code.\n\nFix by parsing only the current flags in the old flags\nattribute -- new applications and new flags should use\n(and will now require) the new flags attribute where\nthe mask is given by the application.\n\nReported-and-tested-by: Thomas Hilber \u003cath9k-dev@toh.cx\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a85e1d55974646a442d95911e3f7d7a891ea9ac5", "tree": "aa4dbeb64336c8e3ee2003a7963ec8ef38675101", "parents": [ "84381b4ed58498e1e3d49a4a306fec9894b8e00c" ], "author": { "name": "Paul Stewart", "email": "pstew@chromium.org", "time": "Fri Dec 09 11:01:49 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Dec 19 14:34:13 2011 -0500" }, "message": "cfg80211: Return beacon loss count in station\n\nIf station info contains a beacon loss count, return\nit to userspace.\n\nSigned-off-by: Paul Stewart \u003cpstew@chromium.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bdd90d5e36a55271beb957b3d7ca3e29b2a90207", "tree": "79243e73e6c64217bc676507504b72a2d59fc096", "parents": [ "d83023daa219486e9aa139d423308a045bf0438b" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Dec 14 12:20:27 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 15 14:45:45 2011 -0500" }, "message": "cfg80211: validate nl80211 station handling better\n\nThe nl80211 station handling code is a bit messy\nand doesn\u0027t do a lot of validation. It seems like\nthis could be an issue for drivers that don\u0027t use\nmac80211 to validate everything.\n\nAs cfg80211 doesn\u0027t keep station state, move the\nvalidation of allowing supported_rates to change\nfor TDLS only in station mode to mac80211.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d83023daa219486e9aa139d423308a045bf0438b", "tree": "de753f1357e6fd8574d6356802e8e4bb595dca46", "parents": [ "c99f895a231b2dfeedd27e4d218a1b2d22cf4d02" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Dec 14 09:29:15 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Dec 15 14:45:45 2011 -0500" }, "message": "nl80211: add TDLS peer flag to policy\n\nThis was evidently missed in the TDLS patch (07ba55d7).\n\nCc: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "00918d33c0e9966392e5a13aeacd712b9da473c9", "tree": "a0fd2e1efffc820244f371cb15652a88ecf38715", "parents": [ "5d22df200beccb1dea26fe4d8684ed93ae2f0aeb" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Dec 13 17:22:05 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Dec 14 14:50:11 2011 -0500" }, "message": "nl80211: accept testmode dump with netdev\n\nAll nl80211 commands that need only the wiphy\nstill allow identifying it by giving an interface\nindex, except, as Kenny pointed out, the testmode\ndump support.\n\nFix this by looking up the wiphy via the ifidx in\nthis case as well.\n\nTested-by: Kenny Hsu \u003ckenny.hsu@intel.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "54858ee5bf659f80a784303e41ee8898fd163f98", "tree": "46901bbd75f8dacfe9677e8d17085508d918d325", "parents": [ "2b50b8f58803f4c8521c6aa5401ed01cd36a1f77" ], "author": { "name": "Alexander Simon", "email": "an.alexsimon@googlemail.com", "time": "Wed Nov 30 16:56:32 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Dec 06 16:05:24 2011 -0500" }, "message": "nl80211: Parse channel type attribute in an ibss join request\n\nPrepare cfg80211 for IBSS HT:\n * extend cfg80211 ibss struct with channel_type\n * Check if extension channel can be used\n * Export can_beacon_sec_chan for use in mac80211 (will be called\n from ibss.c later).\n\nSigned-off-by: Alexander Simon \u003can.alexsimon@googlemail.com\u003e\n[siwu@hrz.tu-chemnitz.de: Updates]\n* fix cfg80211_can_beacon_ext_chan comment\n* remove implicit channel_type enum assumptions\n* remove radar channel flags check\n* add HT IBSS feature flag\n* reword commit message\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nReviewed-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d7a4858c0fde8383f7aa494eda0fba6bef3f2fec", "tree": "2cbf6915ea069ada4e3e1bca0b91b12e06500681", "parents": [ "ba5736a5e9ac20c378ae4179e8a0ed3cc4b44351", "9995ffe5f5fdddcc73e4465cc3f8b38714df8108" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 02 15:44:03 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 02 15:44:03 2011 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-agn.c\n\tdrivers/net/wireless/libertas/cfg.c\n" }, { "commit": "dca7e9430cb3e492437a5ce891b8b3e315c147ca", "tree": "a7503e86e20e649074bbaccd5272d61a51425e2e", "parents": [ "d3c1597b8d1ba0447ce858c7c385eabcf69f2c8f" ], "author": { "name": "Thomas Pedersen", "email": "thomas@cozybit.com", "time": "Thu Nov 24 17:15:24 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 14:44:06 2011 -0500" }, "message": "{nl,cfg,mac}80211: implement dot11MeshHWMPperrMinInterval\n\nAs per 802.11mb 13.9.11.3\n\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4bb62344e4703414fd253ceb07c163ac37da80d4", "tree": "dd8e23fa687ccf2cf21491ccd012fa0447fc08c5", "parents": [ "090891fb2c68eecf95c18c8ba117fc850d21abf8" ], "author": { "name": "Chun-Yeow Yeoh", "email": "yeohchunyeow@gmail.com", "time": "Thu Nov 24 17:15:20 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 14:44:02 2011 -0500" }, "message": "{nl,cfg,mac}80211: Allow Setting Multicast Rate in Mesh\n\nSigned-off-by: Chun-Yeow Yeoh \u003cyeohchunyeow@gmail.com\u003e\nSigned-off-by: Thomas Pedersen \u003cthomas@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1d9d9213d526f2f4ef9a3aa198a29a0b1a670fa1", "tree": "34eadd9e3544cbb01c6768dee820d5430db10edc", "parents": [ "6fd67e937ece538e0ab766df96a9895e6fd622df" ], "author": { "name": "Simon Wunderlich", "email": "simon.wunderlich@s2003.tu-chemnitz.de", "time": "Fri Nov 18 14:20:43 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 14:36:21 2011 -0500" }, "message": "wireless: Add NoAck per tid support\n\nThis patch contains the configuration changes in nl80211/cfg80211.\n\nSigned-off-by: Simon Wunderlich \u003csiwu@hrz.tu-chemnitz.de\u003e\nSigned-off-by: Mathias Kretschmer \u003cmathias.kretschmer@fokus.fraunhofer.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e007b857e88097c96c45620bf3b04a4e309053d1", "tree": "3ebc3353b33539c33e50335c9391f8727e826614", "parents": [ "82e5fc2a34fa9ffea38f00c4066b7e600a0ca5e6" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Thu Nov 24 18:13:56 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 28 13:46:40 2011 -0500" }, "message": "nl80211: fix MAC address validation\n\nMAC addresses have a fixed length. The current\npolicy allows passing \u003c ETH_ALEN bytes, which\nmight result in reading beyond the buffer.\n\nCc: stable@vger.kernel.org\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7e7c8926b2f4e3453b8aeb39cd814d2af3fec24f", "tree": "e22df42bf84d6ea3cb67ae0e332d7d7d10cca4b4", "parents": [ "dd76986b0e398978ca32dd60c1b7dc50ab4e9ae1" ], "author": { "name": "Ben Greear", "email": "greearb@candelatech.com", "time": "Fri Nov 18 11:31:59 2011 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:22:06 2011 -0500" }, "message": "wireless: Support ht-capabilities over-rides.\n\nThis allows users to disable features such as HT, HT40,\nand to modify the MCS, AMPDU, and AMSDU settings for\ndrivers that support it.\n\nThe MCS, AMPDU, and AMSDU features that may be disabled are\nare reported in the phy-info netlink message as a mask.\n\nAttemping to disable features that are not supported will\ntake no affect, but will not return errors. This is to aid\nbackwards compatibility in user-space apps that may not be\nclever enough to deal with parsing the the capabilities mask.\n\nThis patch only enables the infrastructure. An additional\npatch will enable the feature in mac80211.\n\nSigned-off-by: Ben Greear \u003cgreearb@candelatech.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "80b998993d97d8a13589f8462e62a60298c72cf2", "tree": "0cbb131178d893c6a8e607c85a00d35693b81654", "parents": [ "7c4ef7122cef54dc49562eea35cbfaf0f44faa0b" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 18 16:23:01 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:20:49 2011 -0500" }, "message": "nl80211: make get_vlan logic more common\n\nget_vlan() sets the output parameter even if it\nreturns an error, which is a bit odd. Instead,\nconvert it to use ERR_PTR.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7c4ef7122cef54dc49562eea35cbfaf0f44faa0b", "tree": "97cc3b8e602c432375fbe0cdeea9aac8ecbb0fbd", "parents": [ "f2dc7989bf821a0ca78289b32f16078c76c88e7e" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 18 15:33:48 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:20:49 2011 -0500" }, "message": "cfg80211: add flags for off-channel capabilities\n\nCurrently mac80211 implements these for all devices,\nbut given restrictions of some devices that isn\u0027t\nreally true, so prepare for being able to remove the\ncapability for some mac80211 devices.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nAcked-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4745fc095da0d276b9c149e87b853b78d42d4f32", "tree": "06b123cce3c4fa7d8244ce9bde7f18168a9e1387", "parents": [ "fb4431bf608fe135ba743ecdd0aa084a3569992f" ], "author": { "name": "Kalle Valo", "email": "kvalo@qca.qualcomm.com", "time": "Thu Nov 17 19:06:10 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:20:43 2011 -0500" }, "message": "nl80211: add testmode to the list of supported commands\n\nUser space might want to test if driver supports testmode. Adding testmode\nto the list of supported commands makes this easier.\n\nI omitted testmode_dump() in purpose. I assume all drivers implementing\ntestmode_dump() will also implement testmode_cmd().\n\nSigned-off-by: Kalle Valo \u003ckvalo@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b60b07805d557542160d852874fa6a1b969184e", "tree": "74b96b63c62cf7cef9684c19bda8f8d51ceabe0d", "parents": [ "4713e962c5d98901890c446843ae4e0a9d37b7b3" ], "author": { "name": "Luis R. Rodriguez", "email": "mcgrof@qca.qualcomm.com", "time": "Tue Oct 11 10:59:02 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 21 16:20:41 2011 -0500" }, "message": "cfg80211: process regulatory DFS region for countries\n\nThe wireless-regdb now has support for mapping a country to\none DFS region. CRDA sends this to us now so process it\nso we can provide that hint to drivers. This will later be\nused by code for processing DFS in a way that meets the\ncriteria for the DFS region the country belongs to.\n\nSigned-off-by: Luis R. Rodriguez \u003cmcgrof@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "00f740e1a3b7abb51980371ee8fa113df22ae0b8", "tree": "ef32c13175ba8bd2aed63d5fb31ad393829ce90d", "parents": [ "87bbbe22f84b91d0bcd3a7fc638e4f5e8224cc4e" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Nov 10 11:28:56 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 11 12:32:51 2011 -0500" }, "message": "nl80211: Pass probe response data to drivers\n\nPass probe-response data from usermode via beacon parameters.\n\nSigned-off-by: Guy Eilam \u003cguy@wizery.com\u003e\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "87bbbe22f84b91d0bcd3a7fc638e4f5e8224cc4e", "tree": "ef61839cade89a6c47c96c3447d0d4c12f913c41", "parents": [ "d64d373ffed925f29c3e68a8d6f45677a622054e" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Nov 10 11:28:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 11 12:32:51 2011 -0500" }, "message": "nl80211: Add probe response offload attribute\n\nNotify user-space about probe-response offloading support in the driver.\n\nA wiphy flag is used to indicate support and a bitmap of protocols\ndetermines which protocols are supported.\n\nSigned-off-by: Guy Eilam \u003cguy@wizery.com\u003e\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d64d373ffed925f29c3e68a8d6f45677a622054e", "tree": "8fb0699d7e249e2862f11d85dc858d22e2a13999", "parents": [ "e0830f71e7b8c2c58031c9692384819943162e9b" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 10 09:44:46 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 11 12:32:51 2011 -0500" }, "message": "nl80211: fix compiler warning\n\nJohn reported the following warning:\n\nnet/wireless/nl80211.c: In function ‘nl80211_tx_mgmt’:\nnet/wireless/nl80211.c:5286:8: warning: ‘hdr’ may be used uninitialized in this function\n\nEvidently, his version of gcc isn\u0027t able to see that\nwhen \"msg\" is initialized, \"hdr\" must also be. My\ngcc, 4.6.1, can actually see that and doesn\u0027t warn.\nSimply initialize the variable to NULL. That means\nif the compiler was ever right we\u0027ll crash though so\nisn\u0027t really optimal since it may hide warnings from\nthe compiler when somebody modifies this code in the\nfuture.\n\nReported-by: John Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f074bd8eb7a4a210a5119cd7220f89da6c7a2c3", "tree": "336706ad776cf96ce67ae0889f4fb93311c0d29a", "parents": [ "e41215626607f2e9b2227504a8965389a1ba1a25" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sun Nov 06 14:13:33 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:14:08 2011 -0500" }, "message": "nl80211: advertise socket TX status capability\n\nThe new wifi socket TX capability should be\nsupported by wifi drivers, let them advertise\nwhether they do or not.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e247bd9068e3e86c3571147c128883596ace9d05", "tree": "5639065f2b0bfe4cb7389a75e274bc8a53efd75f", "parents": [ "e7f4a940bb5eecd07cf0039e7d9201badc332ae0" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:21 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:54 2011 -0500" }, "message": "cfg80211/mac80211: allow management TX to not wait for ACK\n\nFor probe responses it can be useful to not wait for ACK to\navoid retransmissions if the station that sent the probe is\nalready on the next channel, so allow userspace to request\nnot caring about the ACK with a new nl80211 flag.\n\nSince mac80211 needs to be updated for the new function\nprototype anyway implement it right away -- it\u0027s just a\nfew lines of code.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b92ab5d86dafc2b3733c5fdd5def40c8fe7ea7c9", "tree": "2676545e9b179102b00e02cc19b9643e8f718871", "parents": [ "ee971924543fe82f279d3e97f6f6d02320b381b7" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:19 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:52 2011 -0500" }, "message": "cfg80211: add event for unexpected 4addr frames\n\nThe frames are used by AP/STA WDS mode, and hostapd\nneeds to know when such a frame was received to set\nup the VLAN appropriately to allow using it.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e760230e42cf759bd923457ca2753aacf2e656e", "tree": "c5fd969b75460a915f604fa10bf635999d09989f", "parents": [ "06500736c5d26bff93a4f358713689073e66d0f5" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:17 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:13:51 2011 -0500" }, "message": "cfg80211: allow registering to beacons\n\nAdd the ability to register to received beacon frames\nto allow implementing OLBC logic in userspace. The\nregistration is per wiphy since there\u0027s no point in\nreceiving the same frame multiple times.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7f6cf311a594c1e7ca8120367dd1d4c685aabff1", "tree": "60308101541ba278a4dabd8a5884b5a0de3722eb", "parents": [ "562a74803f4881772ba2375ec4e5aa0ad90f4caa" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:15 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:12:39 2011 -0500" }, "message": "nl80211: add API to probe a client\n\nWhen the AP SME in hostapd is used it wants to\nprobe the clients when they have been idle for\nsome time. Add explicit API to support this.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "562a74803f4881772ba2375ec4e5aa0ad90f4caa", "tree": "2f6e553b4bf17e410c4d4c16cd8388820e7f9b63", "parents": [ "21fc756087d7659d86c344c0b38229313afc6c7c" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Nov 07 12:39:33 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:12:38 2011 -0500" }, "message": "nl80211: advertise device AP SME\n\nAdd the ability to advertise that the device\ncontains the AP SME and what features it can\nsupport. There are currently no features in\nthe bitmap -- probe response offload will be\nadvertised by a few patches Arik is working\non now (who took over from Guy Eilam) and a\ndevice with AP SME will typically implement\nand require response offload.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "28946da763e8b8d8ffd01ab861b684a4afb4bc3b", "tree": "c4e1cd440702b81c2192a164356da4ba769a29a6", "parents": [ "665c93a93e35cafcd8c84073824f1ef1b19f0a7d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Nov 04 11:18:12 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:05:49 2011 -0500" }, "message": "nl80211: allow subscribing to unexpected class3 frames\n\nTo implement AP mode without monitor interfaces we\nneed to be able to send a deauth to stations that\nsend frames without being associated. Enable this\nby adding a new nl80211 event for such frames that\nan application can subscribe to.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "819622678ed7011b4d785ca174de5d4bf179bf83", "tree": "299b5ae38ff8e6b8dc7ebc072bd54b8925de2465", "parents": [ "c2e889a7f7947bc346e0a341e793fd5cb471d884" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Nov 02 23:36:31 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 16:01:01 2011 -0500" }, "message": "nl80211: Increase maximum NL80211_ATTR_KEY_SEQ length to 16\n\nWPI-SMS4 uses 16-octet PN field, so we need to allow longer key\nsequence values to be configured.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5e819059a20b0fc5a71875f28b4cae359e38d85a", "tree": "b94a18142abc5e60c84f90ee2490e8a6af01c2a9", "parents": [ "ae2772b313b98a14f69b5bc67135c9fee48771be", "cc438fccd5783c9f7b4c4858358ac897dcf8a58d" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 14:49:23 2011 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 09 14:49:23 2011 -0500" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless\n" }, { "commit": "3b7b72eed19684824806b3fbefef653a180ef2b0", "tree": "dbaebde80ff0c62f2e2e19310520ad731c2f5c3c", "parents": [ "028f78d43d80dcb8b1142ea38606067151dd3d51" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Sat Oct 22 19:05:51 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 08 15:54:27 2011 -0500" }, "message": "nl80211: clean up genlmsg_end uses\n\ngenlmsg_end() cannot fail, it just returns the length\nof the message. Thus, error handling for it is useless.\nWhile removing it, I also noticed a useless variable\nand removed this it as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "133a3ff2c934223a8143bfa52401bba962a97165", "tree": "61618a358b6d895ed3c3e5764b7b1e5dc0f2c74a", "parents": [ "6c7394197af90f6a332180e33f5d025d3037d883" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 03 14:50:13 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 07 13:19:14 2011 -0500" }, "message": "cfg80211: allow setting TXQ parameters only in AP mode\n\nIn other modes the parameters should not be set.\nRight now, mac80211 will set them, even if the\nuser asked for setting them on VLANs which the\ndriver doesn\u0027t know about, causing all kinds of\ntrouble.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6c7394197af90f6a332180e33f5d025d3037d883", "tree": "9fcebadff9c028206a9c51fe99764662e4acacbf", "parents": [ "3432f9233704a66e6067944339a311744243707d" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Thu Nov 03 09:27:01 2011 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 07 13:19:13 2011 -0500" }, "message": "nl80211: fix HT capability attribute validation\n\nSince the NL80211_ATTR_HT_CAPABILITY attribute is\nused as a struct, it needs a minimum, not maximum\nlength. Enforce that properly. Not doing so could\npotentially lead to reading after the buffer.\n\nCc: stable@vger.kernel.org\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bb6e753e95a968fab0e366caace78fb2c08cc239", "tree": "23ae519a1a766cda1b6927fc0a230dfd0dbbe639", "parents": [ "59b66255bc7804970098533ce7c9bf6967f35f62" ], "author": { "name": "Helmut Schaa", "email": "helmut.schaa@googlemail.com", "time": "Thu Oct 13 16:30:39 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 14 14:48:23 2011 -0400" }, "message": "nl80211: Add sta_flags to the station info\n\nReuse the already existing struct nl80211_sta_flag_update to specify\nboth, a flag mask and the flag set itself. This means\nnl80211_sta_flag_update is now used for setting station flags and also\nfor getting station flags.\n\nSigned-off-by: Helmut Schaa \u003chelmut.schaa@googlemail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "07ba55d7f1d0da174c9bc545c713b44cee760197", "tree": "6ef39589ced179b1f76d7148652f10fc333f3349", "parents": [ "dfe018bf99537e42c816d3f543620a7e09fcf3cd" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:53 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:08 2011 -0400" }, "message": "nl80211/mac80211: allow adding TDLS peers as stations\n\nWhen adding a TDLS peer STA, mark it with a new flag in both nl80211 and\nmac80211. Before adding a peer, make sure the wiphy supports TDLS and\nour operating mode is appropriate (managed).\n\nIn addition, make sure all peers are removed on disassociation.\n\nA TDLS peer is first added just before link setup is initiated. In later\nsetup stages we have more info about peer supported rates, capabilities,\netc. This info is reported via nl80211_set_station().\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "109086ce0b0f94760bdb0e8e2566ff8a2d673639", "tree": "217a3d18f203fe1cf8652f9b33c4ade1f61594c2", "parents": [ "a76011e2cbb6915f60488477311e0f269cee6496" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Wed Sep 28 14:12:50 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:05 2011 -0400" }, "message": "nl80211: support sending TDLS commands/frames\n\nAdd support for sending high-level TDLS commands and TDLS frames via\nNL80211_CMD_TDLS_OPER and NL80211_CMD_TDLS_MGMT, respectively. Add\nappropriate cfg80211 callbacks for lower level drivers.\n\nAdd wiphy capability flags for TDLS support and advertise them via\nnl80211.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: Kalyan C Gaddam \u003cchakkal@iit.edu\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b9ce80ce96aeaeacab5e26442987df45584a049", "tree": "525b1ad3c3486d271877d830cc895172689cc592", "parents": [ "ffca287118d8c9a0a62e16a5ed96ff004caadeda" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Sep 27 20:56:12 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Sep 30 15:57:03 2011 -0400" }, "message": "cfg80211/mac80211: apply station uAPSD parameters selectively\n\nCurrently, when hostapd sets the station as authorized\nwe also overwrite its uAPSD parameter. This obviously\nleads to buggy behaviour (later, with my patches that\nactually add uAPSD support). To fix this, only apply\nthose parameters if they were actually set in nl80211,\nand to achieve that add a bitmap of things to apply.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0874073570d9184a169a4ae2abbe8dbcb71878e9", "tree": "81af47abc50641f911e3b5833850357a48a82be8", "parents": [ "cd32984f64cb4fdd84e33f30da1f10582fc43cbf", "ba54238552625aad2d75f455a4d3db18ea7dec68" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 28 10:28:09 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 28 10:28:09 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.infradead.org/users/linville/wireless\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-scan.c\n\tnet/wireless/nl80211.c\n" }, { "commit": "cd32984f64cb4fdd84e33f30da1f10582fc43cbf", "tree": "3c234c09586f0bbe1ce14cea470ccf3e919c52f9", "parents": [ "2fb40577b05a869904a8fcf7098d26f3c7809644" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Mon Sep 26 09:36:42 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:36:04 2011 -0400" }, "message": "mac80211: treat the WME sta flag as a bit\n\nCorrect flag usage - use it as a bit index instead of a bit value.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f70f01c2ebbe31fbd8a96be3b45c5620dac45b96", "tree": "4052a95a6ec1ab8fa51bfc1f8bae831d8aa5e592", "parents": [ "aad14ceb45f5ff12da2ab5b37a596e6f81566515" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Sun Sep 25 20:06:53 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:11 2011 -0400" }, "message": "cfg80211/mac80211: add netdev param to set_txq_params()\n\ntx params are currently configured per hw, although they\nshould be configured per interface.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e9f935e3e8dc0bddd0df6d148165d95925422502", "tree": "bbb5de5434d0dd0aa7a1b5894320b17ebee434b8", "parents": [ "8ebafde00ed0c682fed8c34ac5ba90160ea0bb30" ], "author": { "name": "Rajkumar Manoharan", "email": "rmanohar@qca.qualcomm.com", "time": "Sun Sep 25 14:53:30 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:34:10 2011 -0400" }, "message": "nl80211/cfg80211: Add support to disable CCK rate for management frame\n\nAdd a new nl80211 attribute to specify whether to send the management\nframes in CCK rate or not. As of now the wpa_supplicant is disabling\nCCK rate at P2P init itself. So this patch helps to send P2P probe\nrequest/probe response/action frames being sent at non CCK rate in 2GHz\nwithout disabling 11b rates.\n\nThis attribute is used with NL80211_CMD_TRIGGER_SCAN and\nNL80211_CMD_FRAME commands to disable CCK rate for management frame\ntransmission.\n\nCc: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: Rajkumar Manoharan \u003crmanohar@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "38ba3c57af1c737966fb58bcbeecdc71f5f4fa90", "tree": "5c2539d3c2cf8e2d0728917ecc4227efcb5774b9", "parents": [ "6d30240e3d68f1da7303801f840132d0821f1767" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Sep 21 18:14:56 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:29:54 2011 -0400" }, "message": "cfg80211: Validate cipher suite against supported ciphers\n\nInstead of using a hardcoded list of cipher suites in nl80211.c, use a\nshared function in util.c to verify that the driver advertises support\nfor the specified cipher. This provides more accurate validation of the\nvalues and allows vendor-specific cipher suites to be added in drivers.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6d30240e3d68f1da7303801f840132d0821f1767", "tree": "56bb2d85ccda77d9d12187cc699e9820d3161de7", "parents": [ "37a41b4affa33bb237d3692bf51f1b5ebcaf29d8" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Sep 21 18:11:33 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 27 14:29:54 2011 -0400" }, "message": "cfg80211: Remove strict validation of AKM suites\n\nNL80211_ATTR_AKM_SUITES can be used to configure new AKMs, like FT or\nthe SHA-256 -based AKMs or FT from 802.11r/802.11w. In addition, vendor\nspecific AKMs could be used. The current validation code for the connect\ncommand prevents cfg80211-based drivers from using these mechanisms even\nif the driver would not actually use this AKM value (i.e., it uses\nWPA/RSN IE from user space). mac80211-based drivers allow any AKM to be\nused since this value is not used there.\n\nRemove the unnecessary validation step in cfg80211 to allow drivers to\ndecide what AKMs are supported. In theory, we could handle this by\nadvertising supported AKMs, but that would not be very effective unless\nwe enforce all drivers (including mac80211) to advertise the set of\nsupported AKMs. This would require additional changes in many places\nwhenever a new AKM is introduced even though no actually functionality\nchanges may be required in most drivers.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1b9ca0272ffae212e726380f66777b30a56ed7a5", "tree": "dd91eefd0ee5fe21ba06816a4a25cc2303603744", "parents": [ "65d0f19e583e80e42b1c67c166bfc4dfdf6ab693" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Sep 21 16:13:07 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 21 15:58:24 2011 -0400" }, "message": "cfg80211: Fix validation of AKM suites\n\nIncorrect variable was used in validating the akm_suites array from\nNL80211_ATTR_AKM_SUITES. In addition, there was no explicit\nvalidation of the array length (we only have room for\nNL80211_MAX_NR_AKM_SUITES).\n\nThis can result in a buffer write overflow for stack variables with\narbitrary data from user space. The nl80211 commands using the affected\nfunctionality require GENL_ADMIN_PERM, so this is only exposed to admin\nusers.\n\nCc: stable@kernel.org\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c9df56b48e4ff003eaebd680ec7a45342dcd03ea", "tree": "b943ce5010290a4979a1488d791a5e6663db02a4", "parents": [ "2981808269941490f209b2db88ae021d7007b39d" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Fri Sep 16 18:56:23 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:14 2011 -0400" }, "message": "cfg80211/nl80211: Add PMKSA caching candidate event\n\nWhen the driver (or most likely firmware) decides which AP to use\nfor roaming based on internal scan result processing, user space\nneeds to be notified of PMKSA caching candidates to allow RSN\npre-authentication to be used.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "39193498913f82dd7e484aa908843ca4114c3b0c", "tree": "14951970eaaa7c66a1e6b2f820b5f7cae8d2280a", "parents": [ "bbb5574224168ef62c8549535c0d0a99e989ecf3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Fri Sep 16 13:45:25 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 19 16:10:13 2011 -0400" }, "message": "cfg80211: validate IBSS BSSID\n\nThe IBSS BSSID is never validated, so an\ninvalid one might end up being used. Fix\nthis by rejecting invalid configuration.\n\nReported-by: Marek Lindner \u003clindner_marek@yahoo.de\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4319e193271dc93241338eb0173fc26dc6c35465", "tree": "fd8c4c1ae175f4404c26e41b43e1667d498e33ee", "parents": [ "ff620849110649b5f94989ddfd7a72b2bd43bd42" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Sep 07 11:50:48 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 14 13:56:43 2011 -0400" }, "message": "cfg80211: verify format of uAPSD information\n\nThe format is intended to be like the subfields\nin the QoS Info field, verify that is the case.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a1f1c21c181be20a8b7e073e5292ff1fe77769fa", "tree": "8b8e46d1dba26f4ef45d4e4d969cbda524d8a4c1", "parents": [ "cedb5412baeffd7326fc4869aa996d7f68d98ebb" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Aug 31 16:01:48 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:53:45 2011 -0400" }, "message": "nl80211/cfg80211: add match filtering for sched_scan\n\nIntroduce filtering for scheduled scans to reduce the number of\nunnecessary results (which cause useless wake-ups).\n\nAdd a new nested attribute where sets of parameters to be matched can\nbe passed when starting a scheduled scan. Only scan results that\nmatch any of the sets will be returned.\n\nAt this point, the set consists of a single parameter, an SSID. This\ncan be easily extended in the future to support more complex matches.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cedb5412baeffd7326fc4869aa996d7f68d98ebb", "tree": "6b5f5c0c034e508b0bff1f7d52cf1aabde5fad3b", "parents": [ "4690c33df6be8bf78a0d5fe58baae33462b0bc1f" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Wed Aug 31 11:29:43 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:50:56 2011 -0400" }, "message": "nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag\n\nadd WIPHY_FLAG_AP_UAPSD flag to indicate uapsd support on\nAP mode.\n\nAdvertise it to userspace by including a new\nNL80211_ATTR_SUPPORT_AP_UAPSD attribute.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f4b34b550a5428345f3794e62de48ad5a3db3954", "tree": "50d5c3b482bd018069fdde870f0c472808156070", "parents": [ "f0425beda4d404a6e751439b562100b902ba9c98" ], "author": { "name": "Vivek Natarajan", "email": "nataraja@qca.qualcomm.com", "time": "Mon Aug 29 14:23:03 2011 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Sep 13 15:42:31 2011 -0400" }, "message": "cfg80211/nl80211: Indicate roaming feature capability to userspace.\n\nWhen the rssi of the current AP drops, both wpa_supplicant and the\nfirmware may do a background scan to find a better AP and try to\nassociate. Since firmware based roaming is faster, inform\nwpa_supplicant to avoid roaming and let the firmware decide to\nroam if necessary.\n\nFor fullmac drivers like ath6kl, it is just enough to provide the\nESSID and the firmware will decide on the BSSID. Since it is not\npossible to do pre-auth during roaming for fullmac drivers, the\nwpa_supplicant needs to completely disconnect with the old AP and\nreconnect with the new AP. This consumes lot of time and it is\nbetter to leave the roaming decision to the firmware.\n\nSigned-off-by: Vivek Natarajan \u003cnataraja@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c75786c9ef9e726dc139325a775e90a684b00ed7", "tree": "90ea19402f4f63217f79410a2909c0c943851927", "parents": [ "a21fa87e3a3a8390f17f53967baa574f4e1e1e76" ], "author": { "name": "Eliad Peller", "email": "eliad@wizery.com", "time": "Tue Aug 23 14:37:46 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 26 10:47:56 2011 -0400" }, "message": "nl80211/cfg80211: add STA WME parameters\n\nAdd new NL80211_ATTR_STA_WME nested attribute that contains\nwme params needed by the low-level driver (uapsd_queues and\nmax_sp).\n\nAdd these params to the station_parameters struct as well.\n\nSigned-off-by: Eliad Peller \u003celiad@wizery.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "16dd7267f460739b3e29d984e73f05c5ffe2b142", "tree": "2902dddb8d8ef045ae64bff734eb400bf8a23fb7", "parents": [ "0507e159a2b590666982b53ecf6fb2843a5bb423" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:11 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace make meshif mesh gate\n\nAllow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute,\nwhich will advertise this mesh node as being a mesh gate.\nNL80211_HWMP_ROOTMODE must be set or this will do nothing.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0507e159a2b590666982b53ecf6fb2843a5bb423", "tree": "a5c0aefae3ea789fb1b0ef9019372e534b93aecc", "parents": [ "699403dbd41998a56d1d92d612ac261e5085a99f" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:10 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,cfg,mac}80211: let userspace set RANN interval\n\nAllow userspace to set Root Announcement Interval for our mesh\ninterface. Also, RANN interval is now in proper units of TUs.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "699403dbd41998a56d1d92d612ac261e5085a99f", "tree": "6fc10331599a64887e7ac68474200ced5d02fb03", "parents": [ "5ee68e5b39de5cefecf147c58711f8ab01c21231" ], "author": { "name": "Javier Cardona", "email": "javier@cozybit.com", "time": "Tue Aug 09 16:45:09 2011 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 24 13:59:43 2011 -0400" }, "message": "{nl,mac}80211: add missing root mode meshconf entries\n\nThis fix allows userspace to mark a meshif as a root node.\n\nSigned-off-by: Javier Cardona \u003cjavier@cozybit.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9946ecfb510462e59afddb2a992da804d58b6bcd", "tree": "2eb7792cf6363f33f41d0532cb218ad86120f3bb", "parents": [ "5fb628e9105eef6796789b1ae93289e1566ccdf0" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:55:56 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add extra IE configuration to AP mode setup\n\nThe NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode\noperations to be started. Add new attributes to provide extra IEs\n(e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response,\nand (Re)Association Response frames internally (likely in firmware).\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5fb628e9105eef6796789b1ae93289e1566ccdf0", "tree": "3d1e9eef06be596bdd0ab936b8527202afac42e7", "parents": [ "32e9de846be885444358b67267f837088c05e0c2" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:54:35 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:04 2011 -0400" }, "message": "nl80211/cfg80211: Add crypto settings into NEW_BEACON\n\nThis removes need from drivers to parse the beacon tail/head data\nto figure out what crypto settings are to be used in AP mode in case\nthe Beacon and Probe Response frames are fully constructed in the\ndriver/firmware.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "32e9de846be885444358b67267f837088c05e0c2", "tree": "181a4b23ab44337fdb72e7e0f5f1c0874154f21f", "parents": [ "0879fa44b54101c9955123582018cb511047a2b6" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Wed Aug 10 23:53:31 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 12 13:45:03 2011 -0400" }, "message": "nl80211/cfg80211: Allow SSID to be specified in new beacon command\n\nThis makes it easier for drivers that generate Beacon and Probe Response\nframes internally (in firmware most likely) in AP mode.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f612cedfe152b536197c0120f2e7779bc90219d0", "tree": "c1ad3b3a00a26eff4b78d81331c168faf901a4ba", "parents": [ "040bdf713d2bec8235f1af705e2d13da5d9baec8" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Thu Aug 11 11:46:22 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 11 14:23:06 2011 -0400" }, "message": "nl80211/cfg80211: Make addition of new sinfo fields safer\n\nAdd a comment pointing out the use of enum station_info_flags for\nall new struct station_info fields. In addition, memset the sinfo\nbuffer to zero before use on all paths in the current tree to avoid\nleaving uninitialized pointers in the data.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "040bdf713d2bec8235f1af705e2d13da5d9baec8", "tree": "94bf0221a212b7e88ebaccfe9c4b76f4f210bd0f", "parents": [ "6a6767b046e2d336e2af06cb605106ed44a852b6" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Wed Aug 10 19:00:33 2011 -0600" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Aug 11 14:23:06 2011 -0400" }, "message": "cfg80211: fix a crash in nl80211_send_station\n\nmac80211 leaves sinfo-\u003eassoc_req_ies uninitialized, causing a random\npointer memory access in nl80211_send_station.\nInstead of checking if the pointer is null, use sinfo-\u003efilled, like\nthe rest of the fields.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50d3dfb728e987790cf3d973aaf5fba2433771d8", "tree": "2466a1545beab6417db076a977da099d7d6694c4", "parents": [ "d2da587839b29ccc5b920fffdb848d7bdb36f11f" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Mon Aug 08 12:11:52 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 10 14:07:42 2011 -0400" }, "message": "cfg80211/nl80211: Send AssocReq IEs to user space in AP mode\n\nWhen user space SME/MLME (e.g., hostapd) is not used in AP mode, the\nIEs from the (Re)Association Request frame that was processed in\nfirmware need to be made available for user space (e.g., RSN IE for\nhostapd). Allow this to be done with cfg80211_new_sta().\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d2da587839b29ccc5b920fffdb848d7bdb36f11f", "tree": "eb1038f35a244ba4250dc0faf356f3c883b7a86d", "parents": [ "281ed297ffb6741550e33b99b24ac3f5c16e3458" ], "author": { "name": "Jouni Malinen", "email": "jouni@qca.qualcomm.com", "time": "Mon Aug 08 12:10:30 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Aug 10 14:07:42 2011 -0400" }, "message": "nl80211: Indicate driver-based offchannel TX on mgmt_tx_cancel_wait\n\nDrivers that support frame transmission with mgmt_tx() may not support\ndriver-based offchannel TX. Use mgmt_tx_cancel_wait instead of mgmt_tx\nwhen figuring out whether to indicate support for this with\nNL80211_ATTR_OFFCHANNEL_TX_OK.\n\nSigned-off-by: Jouni Malinen \u003cjouni@qca.qualcomm.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "84404623da45aac04595a8f5760a58df0e955d87", "tree": "aebf0450b90994be5e51aa9486770a31068c1e40", "parents": [ "17e859a899712d16c3e70b045d61ad9e02c53f8a" ], "author": { "name": "Dan Carpenter", "email": "error27@gmail.com", "time": "Fri Jul 29 11:52:18 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 01 13:46:46 2011 -0400" }, "message": "cfg80211: off by one in nl80211_trigger_scan()\n\nThe test is off by one so we\u0027d read past the end of the\nwiphy-\u003ebands[] array on the next line.\n\nSigned-off-by: Dan Carpenter \u003cerror27@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "a401d2bb363d942245acdd81c5b5a754011696ee", "tree": "1f05cf5d53b72576d101572aeca176320fc361df", "parents": [ "70126f6105f86366fd97644937ef2180b906b7c8" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jul 20 00:52:16 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 20 15:04:38 2011 -0400" }, "message": "cfg80211: fix scan crash on single-band cards\n\ncommit 58389c69150e6032504dfcd3edca6b1975c8b5bc\nAuthor: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nDate: Mon Jul 18 18:08:35 2011 +0200\n\n cfg80211: allow userspace to control supported rates in scan\n\nmade single-band cards crash since it would always\naccess all wiphy-\u003ebands[]. Fix this and reject any\nattempts in the new helper ieee80211_get_ratemask()\nto do the same, rejecting rates configuration for\nunsupported bands.\n\nReported-by: Pavel Roskin \u003cproski@gnu.org\u003e\nTested-by: Pavel Roskin \u003cproski@gnu.org\u003e\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "34850ab25d74ab4eead62c3b4a9e8036a25cc669", "tree": "c1aa56f2d94851804969b71523ade13bb9db693c", "parents": [ "0b5dd734d3545a9833c0bceeed5088ad9a1ca5e3" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Mon Jul 18 18:08:35 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 19 16:49:58 2011 -0400" }, "message": "cfg80211: allow userspace to control supported rates in scan\n\nSome P2P scans are not allowed to advertise\n11b rates, but that is a rather special case\nso instead of having that, allow userspace\nto request the rate sets (per band) that are\nadvertised in scan probe request frames.\n\nSince it\u0027s needed in two places now, factor\nout some common code parsing a rate array.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5a865bad44984de245d20bfb7cff99993e8e8294", "tree": "f4a73c454eddd082e397d53a8467e4a92fd28ee3", "parents": [ "93b6aa693a355932b69c96956596b03f91baec35" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Jul 13 14:57:29 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:30 2011 -0400" }, "message": "nl80211/cfg80211: add max_sched_scan_ie_len in the hw description\n\nSome chips may support different lengths of user-supplied IEs with a\nsingle scheduled scan command than with a single normal scan command.\n\nTo support this, this patch creates a separate hardware description\nelement that describes the maximum size of user-supplied information\nelement data supported in scheduled scans.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "93b6aa693a355932b69c96956596b03f91baec35", "tree": "882cf301349f62c68fcd4df765447cbb969ef67a", "parents": [ "77dbbb138986b26cb99f868d4b6410577ef4c040" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Wed Jul 13 14:57:28 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:29 2011 -0400" }, "message": "nl80211/cfg80211: add max_sched_scan_ssids in the hw description\n\nSome chips can scan more SSIDs with a single scheduled scan command\nthan with a single normal scan command (eg. wl12xx chips).\n\nTo support this, this patch creates a separate hardware description\nelement that describes the amount of SSIDs supported in scheduled\nscans.\n\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "77dbbb138986b26cb99f868d4b6410577ef4c040", "tree": "e3f4f9a2bb6b36938e3b221f4f0ee2e74d1ab238", "parents": [ "95acac61ba66c4abd40e038dae8c1ed2e176c7b1" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Wed Jul 13 10:48:55 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jul 15 13:38:28 2011 -0400" }, "message": "nl80211: advertise GTK rekey support, new triggers\n\nSince we now have the necessary API in place to support\nGTK rekeying, applications will need to know whether it\nis supported by a device. Add a pseudo-trigger that is\nused only to advertise that capability. Also, add some\nnew triggers that match what iwlagn devices can do.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d8598981146241064993e371cea8333f59553cb6", "tree": "bb92a46fb9fe75ee9c4fdbbe0a5b6eafc6818ef3", "parents": [ "8ae2e12f1534e647d4a816755e5a09c2de6f9fca", "34459512ffa7236c849466e3bd604801389734e1" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 11 14:46:59 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 11 14:46:59 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/ath/ath5k/sysfs.c\n\tnet/bluetooth/l2cap_core.c\n\tnet/mac80211/wpa.c\n" }, { "commit": "e5497d766adb92bcbd1fa4a147e188f84f34b20a", "tree": "f5d41f4272b78b8c61a80c22389f6d4b24e65b34", "parents": [ "830af02f24fbc087999b757b8eca51829c67fa6f" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Jul 05 16:35:40 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jul 06 15:05:42 2011 -0400" }, "message": "cfg80211/nl80211: support GTK rekey offload\n\nIn certain circumstances, like WoWLAN scenarios,\ndevices may implement (partial) GTK rekeying on\nthe device to avoid waking up the host for it.\n\nIn order to successfully go through GTK rekeying,\nthe KEK, KCK and the replay counter are required.\n\nAdd API to let the supplicant hand the parameters\nto the driver which may store it for future GTK\nrekey operations.\n\nNote that, of course, if GTK rekeying is done by\nthe device, the EAP frame must not be passed up\nto userspace, instead a rekey event needs to be\nsent to let userspace update its replay counter.\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c10841ca722a0bc960dc541c51582773f9a24f98", "tree": "f1e5901db0a530cfd4008f718a908a86bddcb333", "parents": [ "37000b305bff81bb1ee2f7f37b1319b670a08f76" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Thu Jun 30 08:32:41 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 05 14:42:36 2011 -0400" }, "message": "cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex\n\nThere was a deadlock when rfkill-blocking a wireless interface,\nbecause we were locking the rdev mutex on NETDEV_GOING_DOWN to stop\nsched_scans that were eventually running. The rfkill block code was\nalready holding a mutex under rdev:\n\nkernel: \u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\u003d\nkernel: [ INFO: possible circular locking dependency detected ]\nkernel: 3.0.0-rc1-00049-g1fa7b6a #57\nkernel: -------------------------------------------------------\nkernel: kworker/0:1/4525 is trying to acquire lock:\nkernel: (\u0026rdev-\u003emtx){+.+.+.}, at: [\u003cffffffff8164c831\u003e] cfg80211_netdev_notifier_call+0x131/0x5b0\nkernel:\nkernel: but task is already holding lock:\nkernel: (\u0026rdev-\u003edevlist_mtx){+.+.+.}, at: [\u003cffffffff8164dcef\u003e] cfg80211_rfkill_set_block+0x4f/0xa0\nkernel:\nkernel: which lock already depends on the new lock.\n\nTo fix this, add a new mutex specifically for sched_scan, to protect\nthe sched_scan_req element in the rdev struct, instead of using the\nglobal rdev mutex.\n\nReported-by: Duane Griffin \u003cduaneg@dghda.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3be3fdb58ad22f67c5fd12548c88cefe3f726588", "tree": "0c5c4e509c37098671df55a20b7e9aadb3d74db8", "parents": [ "77b7023afe93b5e3bdcf2c0faaa5e5caafb6ef44", "5ee0a58d8ca443e80ed8712c86c9938360b79cac" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 28 13:53:32 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 28 13:56:21 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-tx.c\n" }, { "commit": "a66b98db570a638afd909459e1e6bfa272344bd3", "tree": "e4e78a0602b46121548fad2e357f03d550d23c94", "parents": [ "8fcbd4dc7a1b338b393dcd6869deb1725cf1a9f3" ], "author": { "name": "Arik Nemtsov", "email": "arik@wizery.com", "time": "Thu Jun 23 00:00:24 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 27 14:45:25 2011 -0400" }, "message": "mac80211: fix rx-\u003ekey NULL dereference during mic failure\n\nSometimes when reporting a MIC failure rx-\u003ekey may be unset. This\ncode path is hit when receiving a packet meant for a multicast\naddress, and decryption is performed in HW.\n\nFortunately, the failing key_idx is not used for anything up to\n(and including) usermode, so we allow ourselves to drop it on the\nway up when a key cannot be retrieved.\n\nSigned-off-by: Arik Nemtsov \u003carik@wizery.com\u003e\nCc: stable@kernel.org\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9720bb3ab0b80659c63ed337eab66104a4156db0", "tree": "e119a06808d631006ca066c5f4c9b8225e3924e2", "parents": [ "a5ffddb70c5cab29fa00e2fdf12217b64b940796" ], "author": { "name": "Johannes Berg", "email": "johannes.berg@intel.com", "time": "Tue Jun 21 09:45:33 2011 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Jun 22 16:09:47 2011 -0400" }, "message": "nl80211: use netlink consistent dump feature for BSS dumps\n\nUse the new consistent dump feature from (generic) netlink\nto advertise when dumps are incomplete.\n\nReaders may note that this does not initialize the\nrdev-\u003ebss_generation counter to a non-zero value. This is\nstill OK since the value is modified only under spinlock\nwhen the list is modified. Since the dump code holds the\nspinlock, the value will either be \u003e 0 already, or the\nlist will still be empty in which case a consistent dump\nwill actually be made (and be empty).\n\nSigned-off-by: Johannes Berg \u003cjohannes.berg@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c48b1f729a75880d0895f0b23efaf551ee800a35", "tree": "167e974268f2979ffe7215755014d7e197fe9d02", "parents": [ "448f2627c169092d2091a1be22feb6a7775f6201", "51e65257142a87fe46a1ce5c35c86c5baf012614" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 10 14:26:12 2011 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 10 14:26:12 2011 -0400" }, "message": "Merge branch \u0027master\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6\n\nConflicts:\n\tdrivers/net/wireless/iwlwifi/iwl-agn-rxon.c\n\tdrivers/net/wireless/rtlwifi/pci.c\n" }, { "commit": "57a27e1d6a3bb9ad4efeebd3a8c71156d6207536", "tree": "2873dc389e21115f1b674134baf1fae0ecdbb087", "parents": [ "6633d649788e72400b02098bd389585e2c56a557" ], "author": { "name": "Luciano Coelho", "email": "coelho@ti.com", "time": "Tue Jun 07 20:42:26 2011 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jun 07 14:19:07 2011 -0400" }, "message": "nl80211: fix overflow in ssid_len\n\nWhen one of the SSID\u0027s length passed in a scan or sched_scan request\nis larger than 255, there will be an overflow in the u8 that is used\nto store the length before checking. This causes the check to fail\nand we overrun the buffer when copying the SSID.\n\nFix this by checking the nl80211 attribute length before copying it to\nthe struct.\n\nThis is a follow up for the previous commit\n208c72f4fe44fe09577e7975ba0e7fa0278f3d03, which didn\u0027t fix the problem\nentirely.\n\nReported-by: Ido Yariv \u003cido@wizery.com\u003e\nSigned-off-by: Luciano Coelho \u003ccoelho@ti.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "180cdc79c2204d0abe15509689dde631290f6a95" }