)]}' { "log": [ { "commit": "1ff1986fc94ee711df3cf19d45f2abf351436a6d", "tree": "8301dc9db8afac2dcd7cc864ac1abd56657d6f27", "parents": [ "939cf3069d31a6e0e335eb5e08ef04895f2d013d" ], "author": { "name": "Changli Gao", "email": "xiaosuo@gmail.com", "time": "Thu Aug 18 22:07:54 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 22:07:54 2011 -0700" }, "message": "net: rps: support 802.1Q\n\nFor the 802.1Q packets, if the NIC doesn\u0027t support hw-accel-vlan-rx, RPS\nwon\u0027t inspect the internal 4 tuples to generate skb-\u003erxhash, so this kind\nof traffic can\u0027t get any benefit from RPS.\n\nThis patch adds the support for 802.1Q to RPS.\n\nSigned-off-by: Changli Gao \u003cxiaosuo@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "939cf3069d31a6e0e335eb5e08ef04895f2d013d", "tree": "492558c46ea92c778f6443bebb3e445d6b18dfdc", "parents": [ "96b0accb8867627250e911f8929e6c01da1ffd40" ], "author": { "name": "Somnath Kotur", "email": "somnath.kotur@emulex.com", "time": "Thu Aug 18 21:51:49 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 21:51:49 2011 -0700" }, "message": "be2net: Storing the \u0027vid\u0027 got by the grp5 event instead of storing the vlan_tag\n\nSigned-off-by: Somnath Kotur \u003csomnath.kotur@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "96b0accb8867627250e911f8929e6c01da1ffd40", "tree": "9c7b907724da173f92a2cbcf914df82ea1aa3b3b", "parents": [ "3b3bceef26f8273b1f51c503e9485a35b8326417" ], "author": { "name": "Michal Schmidt", "email": "mschmidt@redhat.com", "time": "Thu Aug 18 21:51:01 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 21:51:01 2011 -0700" }, "message": "bnx2x: downgrade Max BW error message to debug\n\nThere are valid configurations where Max BW is configured to zero for\nsome VNs.\nPrint the message only if debugging is enabled and do not call the\nconfiguration \"illegal\".\n\n[v2: use DP(), not BNX2X_DBG_ERR(); recommended by Eilon Greenstein.]\n\nSigned-off-by: Michal Schmidt \u003cmschmidt@redhat.com\u003e\nAcked-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3b3bceef26f8273b1f51c503e9485a35b8326417", "tree": "6cf64c541343d0c50470002516f254d4ced63a85", "parents": [ "e88db79b0131b2067bee2e866fd7021fc5af84be" ], "author": { "name": "Tony Breeds", "email": "tony@bakeyournoodle.com", "time": "Thu Aug 18 21:33:49 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 21:33:49 2011 -0700" }, "message": "net: fix IBM EMAC driver after rename.\n\nIn commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the\nIBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC*\n\nThe conversion was incomplete so that even if the driver was added to\nthe .config it wasn\u0027t built, but there were no errors). In this commit\nwe also update the various defconfigs that use EMAC to use the new\nKconfig symbol, and explicitly add the NET_VENDOR_IBM guard.\n\nWe do not explicitly select the Kconfig dependencies, as this would force\nEMAC on. Doing it in the defconfig allows more flexibility.\n\nTested on a canyondlands board.\n\nSigned-off-by: Tony Breeds \u003ctony@bakeyournoodle.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e88db79b0131b2067bee2e866fd7021fc5af84be", "tree": "7e9f7aa88ef04a438b48ecba6112dc020a91b773", "parents": [ "e987716b4fd78e9f3f135ddf762b601aadb02d92" ], "author": { "name": "Ralf Baechle", "email": "ralf@linux-mips.org", "time": "Thu Aug 18 21:32:18 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 21:32:18 2011 -0700" }, "message": "NET: Korina: Don\u0027t include \u003casm/segment.h\u003e\n\nKorina.c is a MIPS-specific SOC driver and \u003casm/segment\u003e is empty on\nMIPS since 2.1.7 ...\n\nSigned-off-by: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e987716b4fd78e9f3f135ddf762b601aadb02d92", "tree": "32e3d9bd9b4a3f6f1eda9298e34aca1334b8ceb8", "parents": [ "83c07ddee839e2d23a04466c92a59aed4d79a30b" ], "author": { "name": "Anirban Chakraborty", "email": "anirban.chakraborty@qlogic.com", "time": "Thu Aug 18 21:31:22 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 21:31:22 2011 -0700" }, "message": "MAINTAINERS: qlcnic\n\nSigned-off-by: Anirban Chakraborty \u003canirban.chakraborty@qlogic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "83c07ddee839e2d23a04466c92a59aed4d79a30b", "tree": "4cfe1de9de62c5ae5f972181fb08e45265dfb237", "parents": [ "b489da87ebf7b0c106e45dc7a3c65d9d72ac6bd7" ], "author": { "name": "Amit Kumar Salecha", "email": "amit.salecha@qlogic.com", "time": "Thu Aug 18 04:12:32 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 18 04:12:32 2011 -0700" }, "message": "MAINTAINERS: change netxen_nic maintainers\n\nI will no longer maintain netxen_nic driver.\nSony Chacko and Rajesh Borundia are taking over.\n\nSigned-off-by: Amit Kumar Salecha \u003camit.salecha@qlogic.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b489da87ebf7b0c106e45dc7a3c65d9d72ac6bd7", "tree": "8d5d9abf6085e70d69edf1decb2e9ebc47fee670", "parents": [ "97efe9aef1ae8922666d32f28d712745a86859e9" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:24 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Add flexcan device support for p1010rdb.\n\nAllow the p1010 processor to select the flexcan network driver.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e,\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e,\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: socketcan-core@lists.berlios.de,\nCc: netdev@vger.kernel.org,\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nCc: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "97efe9aef1ae8922666d32f28d712745a86859e9", "tree": "c02a00d17b63b8454dd69d874bc207fccb8d0aa7", "parents": [ "c8aef4cb788b760331e6df06a5d93389824882b4" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:23 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Prefer device tree clock frequency if available.\n\nIf our CAN device\u0027s device tree node has a clock-frequency property,\nthen use that value for the can devices clock frequency. If not, fall\nback to asking the platform/mach code for the clock frequency associated\nwith the flexcan device.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e,\nCc: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nCc: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e,\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: socketcan-core@lists.berlios.de,\nCc: netdev@vger.kernel.org,\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nCc: devicetree-discuss@lists.ozlabs.org\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c8aef4cb788b760331e6df06a5d93389824882b4", "tree": "c37077d02bf411b6551b03d39bf475f98c438ab3", "parents": [ "243abbf2a610d801904bf1e44917e9ac4ccf823e" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:22 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Add of_match to platform_device definition.\n\nOn powerpc, the OpenFirmware devices are not matched without specifying\nan of_match array. Introduce that array as that is used for matching\non the Freescale P1010 processor.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: socketcan-core@lists.berlios.de\nCc: netdev@vger.kernel.org\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nCc: devicetree-discuss@lists.ozlabs.org\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "243abbf2a610d801904bf1e44917e9ac4ccf823e", "tree": "95d21ecebfa2bb1caa2e94cb8ca4f4b8ffa1d548", "parents": [ "61e271ee64f1da6f69e56419ecf2ca7330884564" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:21 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Fix up fsl-flexcan device tree binding.\n\nThis patch cleans up the documentation of the device-tree binding for\nthe Flexcan devices on Freescale\u0027s PowerPC and ARM cores. Extra\nproperties are not used by the driver so we are removing them.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e,\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e,\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: Scott Wood \u003cscottwood@freescale.com\u003e\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Kumar Gala \u003cgalak@kernel.crashing.org\u003e\nCc: socketcan-core@lists.berlios.de,\nCc: netdev@vger.kernel.org,\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nCc: devicetree-discuss@lists.ozlabs.org\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "61e271ee64f1da6f69e56419ecf2ca7330884564", "tree": "a6490f207c0485c55f6f7942fde8a013a733229b", "parents": [ "12732c308340ad786d540b3a85f7b164189f2108" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:20 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Abstract off read/write for big/little endian.\n\nMake flexcan driver handle register reads in the appropriate endianess.\nThis was a basic search and replace and then define some inlines.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: socketcan-core@lists.berlios.de\nCc: netdev@vger.kernel.org\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "12732c308340ad786d540b3a85f7b164189f2108", "tree": "3f3af7397fbc01a09285efbbc21d6040f3e78051", "parents": [ "b81693d9149c598302e8eb9c20cb20330d922c8e" ], "author": { "name": "holt@sgi.com", "email": "holt@sgi.com", "time": "Tue Aug 16 17:32:19 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:36:38 2011 -0700" }, "message": "flexcan: Remove #include \u003cmach/clock.h\u003e\n\npowerpc does not have a mach-####/clock.h. When testing, I found neither\narm nor powerpc needed the mach/clock.h at all so I removed it.\n\nSigned-off-by: Robin Holt \u003cholt@sgi.com\u003e\nAcked-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\nAcked-by: Wolfgang Grandegger \u003cwg@grandegger.com\u003e\nCc: U Bhaskar-B22300 \u003cB22300@freescale.com\u003e\nCc: socketcan-core@lists.berlios.de\nCc: netdev@vger.kernel.org\nCc: PPC list \u003clinuxppc-dev@lists.ozlabs.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b81693d9149c598302e8eb9c20cb20330d922c8e", "tree": "450ac7ce3252d90d55c46c5a3c28dec8e2f2308c", "parents": [ "afc4b13df143122f99a0eb10bfefb216c2806de0" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Tue Aug 16 06:29:02 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:22:03 2011 -0700" }, "message": "net: remove ndo_set_multicast_list callback\n\nRemove no longer used operation.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "afc4b13df143122f99a0eb10bfefb216c2806de0", "tree": "5a90e0a8226ce4173d8d366f5bed0322c9623cdd", "parents": [ "01789349ee52e4a3faf376f1485303d9723c4f1f" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Tue Aug 16 06:29:01 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:22:03 2011 -0700" }, "message": "net: remove use of ndo_set_multicast_list in drivers\n\nreplace it by ndo_set_rx_mode\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "01789349ee52e4a3faf376f1485303d9723c4f1f", "tree": "cea58b51337ffda221f67d47dd234e52f76f65cf", "parents": [ "d03462b999307ec5c186851ec9c5751bd5a675f7" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Tue Aug 16 06:29:00 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:21:27 2011 -0700" }, "message": "net: introduce IFF_UNICAST_FLT private flag\n\nUse IFF_UNICAST_FTL to find out if driver handles unicast address\nfiltering. In case it does not, promisc mode is entered.\n\nPatch also fixes following drivers:\nstmmac, niu: support uc filtering and yet it propagated\n\tndo_set_multicast_list\nbna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set\n\tndo_set_rx_mode but do not support uc filtering\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "d03462b999307ec5c186851ec9c5751bd5a675f7", "tree": "500f727d52572ae2e5124cde25823c4d3cedbe55", "parents": [ "f3ba150392c85d8175c454a7190b5fa46a49039e" ], "author": { "name": "Jiri Pirko", "email": "jpirko@redhat.com", "time": "Tue Aug 16 03:15:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:17:47 2011 -0700" }, "message": "bonding: use ndo_change_rx_flags callback\n\nBenefit from use of ndo_change_rx_flags in handling change of promisc\nand allmulti. No need to store previous state locally.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f3ba150392c85d8175c454a7190b5fa46a49039e", "tree": "4df54351d5d71fddaf416c3ee984382e885c7acb", "parents": [ "c6865cb3cc6f3c2857fa4c6f5fda2945d70b1e84", "665d7eb8877c6bb777039efb22f894740be10bcb" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:16:00 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:16:00 2011 -0700" }, "message": "Merge branch \u0027can/mscan\u0027 of git://git.pengutronix.de/git/mkl/linux-2.6\n" }, { "commit": "c6865cb3cc6f3c2857fa4c6f5fda2945d70b1e84", "tree": "2c575583ebc973f56714d5ab6751b8745972fd6f", "parents": [ "e971b7225bcb1f318811ef04628c441497372999" ], "author": { "name": "Tom Herbert", "email": "therbert@google.com", "time": "Sun Aug 14 19:46:29 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:06:03 2011 -0700" }, "message": "rps: Inspect GRE encapsulated packets to get flow hash\n\nCrack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on\nin encapsulated packet. Note that this is used only when the\n__skb_get_rxhash is taken, in particular only when the device does\nnot compute provide the rxhash (ie. feature is disabled).\n\nThis was tested by creating a single GRE tunnel between two 16 core\nAMD machines. 200 netperf TCP_RR streams were ran with 1 byte\nrequest and response size.\n\nWithout patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs\nWith patch: 325896 tps, 50/90/99% latencies 603/848/1169\n\nSigned-off-by: Tom Herbert \u003ctherbert@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "e971b7225bcb1f318811ef04628c441497372999", "tree": "0c860fe9fe988cc117a5275168833a585211be17", "parents": [ "bdeab991918663aed38757904219e8398214334c" ], "author": { "name": "Tom Herbert", "email": "therbert@google.com", "time": "Sun Aug 14 19:46:12 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:06:03 2011 -0700" }, "message": "rps: Infrastructure in __skb_get_rxhash for deep inspection\n\nBasics for looking for ports in encapsulated packets in tunnels.\n\nSigned-off-by: Tom Herbert \u003ctherbert@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "bdeab991918663aed38757904219e8398214334c", "tree": "bc6c02da7ed88e3e568677b4a35fb4e55de363de", "parents": [ "792df22cd0499b4e662d4618b0008fdcfef8b04e" ], "author": { "name": "Tom Herbert", "email": "therbert@google.com", "time": "Sun Aug 14 19:45:55 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:06:03 2011 -0700" }, "message": "rps: Add flag to skb to indicate rxhash is based on L4 tuple\n\nThe l4_rxhash flag was added to the skb structure to indicate\nthat the rxhash value was computed over the 4 tuple for the\npacket which includes the port information in the encapsulated\ntransport packet. This is used by the stack to preserve the\nrxhash value in __skb_rx_tunnel.\n\nSigned-off-by: Tom Herbert \u003ctherbert@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "792df22cd0499b4e662d4618b0008fdcfef8b04e", "tree": "ec980bfc5b5bf79b0c171e23656012887d6c3092", "parents": [ "f1deab502206ab7e4470334b7738383c76e4ddd9" ], "author": { "name": "Tom Herbert", "email": "therbert@google.com", "time": "Sun Aug 14 19:45:04 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 20:06:03 2011 -0700" }, "message": "rps: Some minor cleanup in get_rps_cpus\n\nUse some variables for clarity and extensibility.\n\nSigned-off-by: Tom Herbert \u003ctherbert@google.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f1deab502206ab7e4470334b7738383c76e4ddd9", "tree": "0284270dc050f2ffd60646d25e815d16357dbe37", "parents": [ "94f05b0f60de32e6efa19310bd142f1519e2abdb" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sun Aug 14 12:16:21 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 15:47:23 2011 -0700" }, "message": "bnx2x: Use pr_fmt and message logging cleanups\n\nAdd pr_fmt(fmt) KBUILD_MODNAME \": \" to prefix messages with \"bnx2x: \".\nRemove #define DP_LEVEL and use pr_notice.\nRepeating KERN_\u003cLEVEL\u003e isn\u0027t necessary in multi-line printks.\nprintk macro neatening, use fmt and ##__VA_ARGS__.\nCoalesce long formats.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nAcked-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "94f05b0f60de32e6efa19310bd142f1519e2abdb", "tree": "9d7f9b70833d1acdb0798d68b49c6cd309cefc58", "parents": [ "0f9dad10a040fa72c588db46a94c9e96545cc509" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sun Aug 14 12:16:20 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 15:47:23 2011 -0700" }, "message": "bnx2x: Coalesce pr_cont uses and fix DP typos\n\nUses of pr_cont should be avoided where reasonably possible\nbecause they can be interleaved by other threads and processes.\n\nCoalesce pr_cont uses.\n\nFix typos, duplicated words and spacing in DP uses caused\nby split multi-line formats. Coalesce some of these\nsplit formats. Add missing terminating newlines to DP uses.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nAcked-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0f9dad10a040fa72c588db46a94c9e96545cc509", "tree": "2ff2392de3fe8ec413d986400dac7f1c37920817", "parents": [ "a27fc96b0317b732b68b5f781bbdeb56ab5082a8" ], "author": { "name": "Joe Perches", "email": "joe@perches.com", "time": "Sun Aug 14 12:16:19 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Wed Aug 17 15:47:23 2011 -0700" }, "message": "bnx2x: Remove local defines for %pM and mac address\n\nUse %pM and mac address directly instead.\n\nSigned-off-by: Joe Perches \u003cjoe@perches.com\u003e\nAcked-by: Eilon Greenstein \u003ceilong@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "a27fc96b0317b732b68b5f781bbdeb56ab5082a8", "tree": "f52b25ab7a0005f0bd1da684873c8de8c1f3b7cf", "parents": [ "acf42a2a575777681fee45ed59d7140be38e9142" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Aug 15 14:09:22 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 16:36:15 2011 -0700" }, "message": "ethtool: Note common alternate exit condition for interrupt coalescing\n\nMany implementations ignore the value of max_frames and do not\ntreat usecs \u003d\u003d 0 as special. Document this as deprecated.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "acf42a2a575777681fee45ed59d7140be38e9142", "tree": "8a5fc2c1005d389fedd4816926ab42d07fe96fd3", "parents": [ "2d7c79390eccd743a643db3fa577f4837e7f2b85" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Aug 15 14:08:37 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 16:36:15 2011 -0700" }, "message": "ethtool: Explicitly state the exit condition for interrupt coalescing\n\nAlso explicitly state how to disable interrupt coalescing.\n\nRemove the now-redundant text from field descriptions.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2d7c79390eccd743a643db3fa577f4837e7f2b85", "tree": "9c13001aac43a3f3de9e9d60778968faf56a92b5", "parents": [ "725b361b29ba9fb72705a30743d288ee66055209" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Aug 15 14:07:47 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 16:36:14 2011 -0700" }, "message": "ethtool: Correct description of \u0027max_coalesced_frames\u0027 fields\n\nThe current descriptions state that these fields specify \u0027How many\npackets to delay ... after a packet ...\u0027 which implies that the\nhardware should wait for (max_coalesced_frames + 1) completions before\ngenerating an interrupt. It is also stated that setting both this\nfield and the corresponding \u0027coalesce_usecs\u0027 field to 0 is invalid.\nTogether, this implies that the hardware must always be configured\nto delay a completion IRQ for at least 1 usec or 1 more completion.\n\nI believe that the addition of 1 is not intended, and David Miller\nconfirms that the original implementation (in tg3) does not do this.\nClarify the descriptions of these fields to avoid this interpretation.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "725b361b29ba9fb72705a30743d288ee66055209", "tree": "3334455ee379ec86e035244920926d0323caf4e8", "parents": [ "5f308d195ed2ae227bea569c7c8a4563e04e0110" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Aug 15 14:07:15 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 16:36:14 2011 -0700" }, "message": "ethtool: Specify what kind of coalescing struct ethtool_coalesce covers\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "5f308d195ed2ae227bea569c7c8a4563e04e0110", "tree": "541666b150dae8f80f8c9c5058589993997d204a", "parents": [ "19e2f6fe9601ca5c846b7163e6d6d00f87b34760" ], "author": { "name": "Ben Hutchings", "email": "bhutchings@solarflare.com", "time": "Mon Aug 15 14:06:20 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 16:36:14 2011 -0700" }, "message": "ethtool: Reformat struct ethtool_coalesce comments into kernel-doc format\n\nThis reorders and duplicates some wording, but should make no\nsubstantive changes.\n\nSigned-off-by: Ben Hutchings \u003cbhutchings@solarflare.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "19e2f6fe9601ca5c846b7163e6d6d00f87b34760", "tree": "4c13d42b3aa0f8415f72bb075ac89841667a6cd9", "parents": [ "ef37d38a1fe78ba627b8178af02df31e59b18896" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 15 23:10:39 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Aug 16 00:16:49 2011 -0700" }, "message": "net: Fix sungem_phy sharing.\n\nSince sungem_phy is used by multiple, unrelated, drivers make it\nbuild as a real module under drivers/net.\n\ndepmod will pick up the symbol dependency and make sure sungem_phy.ko\ngets loaded any time sungem.ko or spider_net.ko is loaded.\n\nTested-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "ef37d38a1fe78ba627b8178af02df31e59b18896", "tree": "6cbc81470262a8292081540c4171c09673cab429", "parents": [ "2bb698412d8aab0bfc3f269f5ebe8eb67d7cc8f4" ], "author": { "name": "Stephen Rothwell", "email": "sfr@canb.auug.org.au", "time": "Mon Aug 15 21:02:55 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Mon Aug 15 21:02:55 2011 -0700" }, "message": "sungem: sungem_phy.h moved\n\nSigned-off-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "665d7eb8877c6bb777039efb22f894740be10bcb", "tree": "1eb2756354cd5a29c1a49c27a25066f410972056", "parents": [ "b333293058aa2d401737c7246bce58f8ba00906d" ], "author": { "name": "Marc Kleine-Budde", "email": "mkl@pengutronix.de", "time": "Mon Aug 15 12:45:08 2011 +0200" }, "committer": { "name": "Marc Kleine-Budde", "email": "mkl@pengutronix.de", "time": "Mon Aug 15 12:52:20 2011 +0200" }, "message": "net/can/mscan: add __iomem annotations\n\nThis patch fixes the following sparse warning by adding the missing\n__iomem annotation.\n\ndrivers/net/can/mscan/mscan.c:73:32: warning: incorrect type in argument 1 (different address spaces)\ndrivers/net/can/mscan/mscan.c:73:32: expected unsigned char volatile [noderef] [usertype] \u003casn:2\u003e*addr\ndrivers/net/can/mscan/mscan.c:73:32: got unsigned char *\u003cnoident\u003e\n\nSigned-off-by: Marc Kleine-Budde \u003cmkl@pengutronix.de\u003e\n" }, { "commit": "2bb698412d8aab0bfc3f269f5ebe8eb67d7cc8f4", "tree": "641177b2577c01119a8a25430f363963e9c20e66", "parents": [ "b333293058aa2d401737c7246bce58f8ba00906d" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 14 22:52:04 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sun Aug 14 22:52:04 2011 -0700" }, "message": "net: Move sungem_phy.h under include/linux\n\nFixes build failures of the spider_net driver because it tries\nto use a convoluted path to include this header.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "b333293058aa2d401737c7246bce58f8ba00906d", "tree": "dace4eab8f669d29b4e10cd784d16ca1690cbbbf", "parents": [ "0da9581ddb0ffbec8129504d661b563749160e70" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:59 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:17 2011 -0700" }, "message": "qeth: add support for af_iucv HiperSockets transport\n\nThis patch extends the HiperSockets device driver to send and receive\naf_iucv traffic over HiperSockets transport.\nTX: Driver uses new asynchronous delivery of storage blocks to pass\n flow control/congestion information from the HiperSockets microcode\n to the af_iucv socket.\nRX: Memory for incoming traffic is preallocated and passed to\n HiperSockets layer. If receiver is not capable to clean its buffers\n shared with HiperSockets and pass new memory to the HiperSockets\n layer this will cause flow control/congestion events on the\n sender.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: Einar Lueck \u003celelueck@de.ibm.com\u003e\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "0da9581ddb0ffbec8129504d661b563749160e70", "tree": "9638d1ffcb05b0c51ab450967126c346e3db9982", "parents": [ "aae7ea8d54f4fa6f016fffa2dbe170d0e7851dd0" ], "author": { "name": "Einar Lueck", "email": "elelueck@de.ibm.com", "time": "Mon Aug 08 01:33:58 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "qeth: exploit asynchronous delivery of storage blocks\n\nThis patch exploits the QDIO support for asynchronous delivery of storage\nblocks for Hipersockets. The exploitation is not configured per default and\nmay be enabled via the function qeth_configure_cq.\n\nSigned-off-by: Einar Lueck \u003celelueck@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "aae7ea8d54f4fa6f016fffa2dbe170d0e7851dd0", "tree": "814c645ddf6527949e0d53b729d40db16dfe1455", "parents": [ "9cb7284f3058d272758ebaaa8f6f924cb99792bc" ], "author": { "name": "Einar Lueck", "email": "elelueck@de.ibm.com", "time": "Mon Aug 08 01:33:57 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "qeth: support forced signal adapter indications\n\nThis patch ensures that signal adapter commands are issued if they are\nindicated to be required.\n\nSigned-off-by: Einar Lueck \u003celelueck@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "9cb7284f3058d272758ebaaa8f6f924cb99792bc", "tree": "a800cec83dcb89596108bbc75bfc6521c01c2b76", "parents": [ "104ea556ee7f40039c9c635d0c267b1fde084a81" ], "author": { "name": "frank.blaschka@de.ibm.com", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:56 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "qdio: support forced signal adapter indications\n\nThis patch ensures that signal adapter commands are issued if they are\nindicated to be required.\n\nSigned-off-by: Einar Lueck \u003celelueck@de.ibm.com\u003e\nSigned-off-by: Jan Glauber \u003cjang@linux.vnet.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "104ea556ee7f40039c9c635d0c267b1fde084a81", "tree": "5b4af497551a3f2e2cb2f24030d028392aae07e0", "parents": [ "3881ac441f642d56503818123446f7298442236b" ], "author": { "name": "frank.blaschka@de.ibm.com", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:55 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "qdio: support asynchronous delivery of storage blocks\n\nThis patch introduces support for asynchronous delivery of storage blocks for\nHipersockets. Upper layers may exploit this functionality to reuse SBALs for\nwhich the delivery status is still pending.\n\nSigned-off-by: Einar Lueck \u003celelueck@de.ibm.com\u003e\nSigned-off-by: Jan Glauber \u003cjang@linux.vnet.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "3881ac441f642d56503818123446f7298442236b", "tree": "79dfd48212f559c18e70ed5d142101ce37897152", "parents": [ "4dc83dfd3efa015628ebaa7245d342c8d5ca0298" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:54 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "af_iucv: add HiperSockets transport\n\nThe current transport mechanism for af_iucv is the z/VM offered\ncommunications facility IUCV. To provide equivalent support when\nrunning Linux in an LPAR, HiperSockets transport is added to the\nAF_IUCV address family. It requires explicit binding of an AF_IUCV\nsocket to a HiperSockets device. A new packet_type ETH_P_AF_IUCV\nis announced. An af_iucv specific transport header is defined\npreceding the skb data. A small protocol is implemented for\nconnecting and for flow control/congestion management.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nReviewed-by: Hendrik Brueckner \u003cbrueckner@linux.vnet.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "4dc83dfd3efa015628ebaa7245d342c8d5ca0298", "tree": "86baea1567da2c4796fbe0208704b10bdfaa7d1b", "parents": [ "493d3971a65c921fad5c3369c7582214c91c965a" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:53 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "if_ether: add new Ethernet Protocol ID for af_iucv\n\nAdd a new ethertype for af_iucv over s/390 HiperSockets transport. Since\nHiperSockets is not a real ethernet hw this is not an officially registered ID.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "493d3971a65c921fad5c3369c7582214c91c965a", "tree": "92e11e5fcdaf79772f39f8aac5efb2649671da1e", "parents": [ "6fcd61f7bf5d56a83cbf26c14915138d1a64ca4e" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "af_iucv: cleanup - use iucv_sk(sk) early\n\nCode cleanup making make use of local variable for struct iucv_sock.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "6fcd61f7bf5d56a83cbf26c14915138d1a64ca4e", "tree": "5efef0bc1c28fb5e9707bcab7bad9b9cd405ef3d", "parents": [ "c69748d1c9b5c2db8daae7a1eb55c46932e4376a" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:51 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "af_iucv: use loadable iucv interface\n\nFor future af_iucv extensions the module should be able to run in LPAR\nmode too. For this we use the new dynamic loading iucv interface.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "c69748d1c9b5c2db8daae7a1eb55c46932e4376a", "tree": "1c5d5894093e8503cd730ac4b1cc938f98fd6e04", "parents": [ "96d042a68bc204c1d39abd71dcb29d9fcb1601ce" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:50 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:16 2011 -0700" }, "message": "iucv: kernel option for z/VM IUCV and HiperSockets\n\nWhen adding HiperSockets transport to AF_IUCV Sockets, af_iucv either\ndepends on IUCV or QETH_L3 (or both). This patch introduces the\nnecessary changes for kernel configuration.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "96d042a68bc204c1d39abd71dcb29d9fcb1601ce", "tree": "3d57c3b508d2d7b9a252ab4c04349b85c03876fc", "parents": [ "99558ea93ce885ab191df2bf8ef964880e3b34a7" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:49 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "iucv: introduce loadable iucv interface\n\nThis patch adds a symbol to dynamically load iucv functions.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "99558ea93ce885ab191df2bf8ef964880e3b34a7", "tree": "269d366d8db7f974d27edd569f56c748cb095575", "parents": [ "1d31f52e38dfaf8bd07a6901c86fdd45e03eed24" ], "author": { "name": "Ursula Braun", "email": "ursula.braun@de.ibm.com", "time": "Mon Aug 08 01:33:48 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "qeth: do not apply priority queuing to HiperSockets\n\nOSA cards can be configured to support 1 or 4 output queues. This\ndoes not apply to HiperSockets. This patch limits determination of\nthe configured number of output queues to OSA cards only, but excludes\nHiperSockets.\n\nSigned-off-by: Ursula Braun \u003cursula.braun@de.ibm.com\u003e\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "1d31f52e38dfaf8bd07a6901c86fdd45e03eed24", "tree": "ca1cfde9baf6394a2fe61d5e3b172d8d8e3789d5", "parents": [ "f860b0522f65d3a0f8e6a4d908933737e1a82817" ], "author": { "name": "Frank Blaschka", "email": "frank.blaschka@de.ibm.com", "time": "Mon Aug 08 01:33:47 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Aug 13 01:10:15 2011 -0700" }, "message": "qeth: l3 ipv6 vlan not working on shared OSA chpid\n\nIn layer 3 mode IPv6 over VLAN does not work on newer OSA levels in\ncase the sender and receiver run on the same (shared) OSA adapter.\nKeep vlan info in the skb so the qdio header is filled with the\nrequired vlan tag.\n\nSigned-off-by: Frank Blaschka \u003cfrank.blaschka@de.ibm.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f860b0522f65d3a0f8e6a4d908933737e1a82817", "tree": "8002a666789db1196fd85df663d0fc4d8e852723", "parents": [ "531c4f896ca380812c22841e8ae396428a3327bf" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 04:19:17 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:44:19 2011 -0700" }, "message": "drivers/net: Kconfig and Makefile cleanup\n\nAfter the move of the Ethernet drivers into drivers/net/ethernet/\nthere was some leftover cleanup to do in the Kconfig and Makefile.\n\nRemoved the 10/100, 1000, and 10GbE Kconfig menus.\n\nRemoved the out-dated pci-skeleton.c file which was used an\nexample driver. With the current networking features and\nstructure, the file is no longer a good example to use for\ndriver creation.\n\nCC: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "531c4f896ca380812c22841e8ae396428a3327bf", "tree": "321dfd12184406b18eb0154ff8a416f394352870", "parents": [ "cdd80bd4eece6109c15864e776b83c88c3bd891b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:37:14 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Aug 13 00:37:14 2011 -0700" }, "message": "acenic: Move the Alteon driver\n\nBased on feedback from Alan Cox, the acenic driver moved to\ndrivers/net/ethernet/alteon/ and made the necessary Kconfig and\nMakefile changes.\n\nCC: Jes Sorensen \u003cjes@trained-monkey.org\u003e\nCC: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "cdd80bd4eece6109c15864e776b83c88c3bd891b", "tree": "abad5f1ca9e1dc8752e2f7b58f471fcbea28b9d5", "parents": [ "59ffb30f7d43d4db2b2be165037a1a29d2011cdb" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 18:42:56 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:53 2011 -0700" }, "message": "tile: Move the Tilera driver\n\nMove the Tilera driver into drivers/net/ethernet/tile and\nmake the necessary Kconfig and Makefile changes.\n\nUpdated the Kconfig so that the options defualt to y if TILE kernel.\n\nCC: Chris Metcalf \u003ccmetcalf@tilera.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "59ffb30f7d43d4db2b2be165037a1a29d2011cdb", "tree": "39ba914f7d5c91110fc73b7bd49f02fb202d2588", "parents": [ "37b937575b5a93a8fcbd4e1d553415f99381f650" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 03:27:05 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:43 2011 -0700" }, "message": "xircom: Move the Xircom driver\n\nMove the Xircom driver into drivers/net/ethernet/xircom/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003cpsheer@icon.co.za\u003e\nCC: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "37b937575b5a93a8fcbd4e1d553415f99381f650", "tree": "be31e45b7da810389b649eae242a0695f79cb743", "parents": [ "7191047028471c74808291d35dd0502cf73e4d2a" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 03:53:13 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:36 2011 -0700" }, "message": "sh_eth: Move the Renesas SuperH driver\n\nMove the Renesas driver into drivers/net/ethernet/renesas/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Yoshihiro Shimoda \u003cyoshihiro.shirmoda.uh@renesas.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7191047028471c74808291d35dd0502cf73e4d2a", "tree": "a27ef2c31065af64715e56820ca07b6b33af1a3a", "parents": [ "d7058a79c56abf58bb33a5c2eee2f7cde6f5ec36" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 17:45:14 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:28 2011 -0700" }, "message": "netx: Move the netx driver\n\nMove the netx driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "d7058a79c56abf58bb33a5c2eee2f7cde6f5ec36", "tree": "ad0ac94ec1526aaa82f10ce54ebdab9aa30a959f", "parents": [ "580416e6e4a886512ba692f245a9cb87f75afac7" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 25 03:18:24 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:14 2011 -0700" }, "message": "dm9000: Move the Davicom driver\n\nMove the Davicom driver into drivers/net/ethernet/davicom/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ben Dooks \u003cben@simtec.co.uk\u003e\nCC: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n" }, { "commit": "580416e6e4a886512ba692f245a9cb87f75afac7", "tree": "846fd01e43b5de123515bc2248260d51440eaf5b", "parents": [ "1fe003fd4247edf0d1ccf32061b046b90492a954" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 16:12:37 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:09 2011 -0700" }, "message": "enc28j60: Move the Microchip driver\n\nMove the Microchip driver into drivers/net/ethernet/microchip/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Claudio Lanconelli \u003clanconelli.claudio@eptar.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "1fe003fd4247edf0d1ccf32061b046b90492a954", "tree": "402789a0fa44824a74c880828161b61394d392b2", "parents": [ "4ee542995273f6d6a83bc76cd13d71662f1c141c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:51:26 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:47:03 2011 -0700" }, "message": "greth: Move the Aeroflex Gaisler driver\n\nMove the Aeroflex Gaisler driver into drivers/net/ethernet/aeroflex/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Kristoffer Glembo \u003ckristoffer@gaisler.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "4ee542995273f6d6a83bc76cd13d71662f1c141c", "tree": "0bcbb158db15f67556fe4bc7432d84fff2b992a4", "parents": [ "9c8571da0a85e4491d1d5bda088b534087e29497" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:33:02 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:58 2011 -0700" }, "message": "ethoc: Move the Avionic driver\n\nMove the Avionic driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9c8571da0a85e4491d1d5bda088b534087e29497", "tree": "c565160211fd681db03e2e802ddf669a0b6d105c", "parents": [ "7e25d72458c64e6ca76d69ae8da9ba98f1bf9d25" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 14:01:17 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:51 2011 -0700" }, "message": "dnet: Move the Dave Ethernet driver\n\nMove the Dave Ethernet driver into drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ilya Yanok \u003cyanok@emcraft.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7e25d72458c64e6ca76d69ae8da9ba98f1bf9d25", "tree": "2e40c0a52349fbafb1c8e580355f4a6a5835f186", "parents": [ "9bba23b0ae933a143f8ea89e59c6becf0c1c1d1e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 13:19:50 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 23:46:43 2011 -0700" }, "message": "hp100: Move the HP driver\n\nMove the HP driver into drivers/net/ethernet/hp/ and\nmade the necessary Kconfig and Makefile changes.\n\nCC: Jaroslav Kysela \u003cperex@perex.cz\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9bba23b0ae933a143f8ea89e59c6becf0c1c1d1e", "tree": "128d489d1e14d3e422fe74845eb4e211b3993272", "parents": [ "69b4b0952b7ef0bf9048723aa8f4ec3fd47d1fc9" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 24 02:13:24 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:39:02 2011 -0700" }, "message": "starfire: Move the Adaptec driver\n\nMove the Adaptec driver into drivers/net/ethernet/adaptec/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Ion Badulescu \u003cionut@badula.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "69b4b0952b7ef0bf9048723aa8f4ec3fd47d1fc9", "tree": "226427069cf8321bedc4c27f18a1706f7c99c275", "parents": [ "15c037d6423eefb0fc2763f875dbacb71109d603" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 23 23:52:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:52 2011 -0700" }, "message": "forcedeth: Move the NVIDIA nForce driver\n\nMove the nForce driver into drivers/net/ethernet/nvidia/ and make\nthe necessary Kconfig and Makefile changes.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "15c037d6423eefb0fc2763f875dbacb71109d603", "tree": "d7ff47378cf51c6998bfb7b781b96a23c848f5b0", "parents": [ "58565a35eab01eb5fba928af23d31a636d03a056" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 03:26:31 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:47 2011 -0700" }, "message": "fealnx: Move the Myson driver\n\nMove the Myson driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "58565a35eab01eb5fba928af23d31a636d03a056", "tree": "dda6047a09182bc4ac866a82e2303501496ff6a9", "parents": [ "9f2f381f813858755f5b6ef7af316feda0726ef3" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 23 23:26:01 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:34 2011 -0700" }, "message": "r6040: Move the RDC driver\n\nMove the RDC driver into drivers/net/ethernet/rdc/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9f2f381f813858755f5b6ef7af316feda0726ef3", "tree": "d92fe910d8a8ef2c06ddeeb88ecd786d315f713e", "parents": [ "7b35f03338a8557122e62ea1a011f1628b978e8d" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 01:52:36 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:26 2011 -0700" }, "message": "macb: Move the Atmel driver\n\nMove the Atmel driver into drivers/net/ethernet/cadence/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCC: Jamie Iles \u003cjamie@jamieiles.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Jamie Iles \u003cjamie@jamieiles.com\u003e\nAcked-by: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\n" }, { "commit": "7b35f03338a8557122e62ea1a011f1628b978e8d", "tree": "3dc66cadbfa8f86c43bd19fac73c954f9b762b24", "parents": [ "ae7668d03c4de78dd0be79278f410a1415786e67" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 18 00:01:26 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:13 2011 -0700" }, "message": "bfin_mac: Move the Analog Devices Inc driver\n\nMove the Analog Devices Inc driver into drivers/net/ethernet/adi/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003cuclinux-dist-devel@blackfin.uclinux.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Bob Liu \u003cbob.liu@analog.com\u003e\n" }, { "commit": "ae7668d03c4de78dd0be79278f410a1415786e67", "tree": "a740f183d7ed8601a5cc090afc0e092e02a8b1ad", "parents": [ "3215df6a8e35fe6fc7c86ee0df2863c669a8e068" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jul 22 17:36:06 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:08 2011 -0700" }, "message": "lantiq: Move the Lantiq SoC driver\n\nMove the Lantiq driver into drivers/net/ethernet/ and the\nnecessary Kconfig and Makefile changes.\n\nCC: John Crispin \u003cblogic@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: John Crispin \u003cblogic@openwrt.org\u003e\n" }, { "commit": "3215df6a8e35fe6fc7c86ee0df2863c669a8e068", "tree": "dca18e0d61b12fcda96b480572e41d2c1ea9431c", "parents": [ "19c72cacce0ed8def4a37a5b4c4408cc83cf949c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jul 19 01:15:12 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:38:01 2011 -0700" }, "message": "mipsnet: Move the MIPS driver\n\nMove the MIPS drivers into drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "19c72cacce0ed8def4a37a5b4c4408cc83cf949c", "tree": "91c87ef23a6d8f3555db3a58023c6e8cff84e71e", "parents": [ "7443713a31f284365454493a9adbaea02bcc4344" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jun 17 21:45:53 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:37:45 2011 -0700" }, "message": "korina: Move the IDT driver\n\nMove the IDT driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes\n\nCC: \"IDT Inc.\" \u003crischelp@idt.com\u003e\nCC: Felix Fietkau \u003cnbd@openwrt.org\u003e\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "7443713a31f284365454493a9adbaea02bcc4344", "tree": "58e4ec1abf2b85a3cb54efe71350ca4f193c2eac", "parents": [ "b13ad8f498793dc582b7f42f27b8f44490bd608d" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Jun 16 15:02:54 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 12:37:35 2011 -0700" }, "message": "ipg: Move the IC Plus driver\n\nMove the IC Plus driver into drivers/net/ethernet/icplus/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \u003ccraig_rich@sundanceti.com\u003e\nCC: \u003csorbica@icplus.com.tw\u003e\nCC: \u003cjesse@icplus.com.tw\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "b13ad8f498793dc582b7f42f27b8f44490bd608d", "tree": "d0a1acf3e2d89fbc3bbf0d11fd2b60a41057a55c", "parents": [ "63d24a0eb71b1ec5ed302816379aaf76eecb053c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 11:23:00 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:30 2011 -0700" }, "message": "xilinx/ll_temac: Move the Xilinx drivers\n\nMove the Xilinx drivers into drivers/net/ethernet/xilinx/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: John Williams \u003cjohn.williams@petalogix.com\u003e\nCC: \"David H. Lynch Jr.\" \u003cdhlii@dlasys.net\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "63d24a0eb71b1ec5ed302816379aaf76eecb053c", "tree": "d277238b203e8cdcf4bf63e58192a68c40f46ece", "parents": [ "c23c5c1663b36c1428df32d1645232662459e02f" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 10:17:58 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:22 2011 -0700" }, "message": "jme: Move the JME driver\n\nMove the JME driver into drivers/net/ethernet/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Guo-Fu Tseng \u003ccooldavid@cooldavid.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "c23c5c1663b36c1428df32d1645232662459e02f", "tree": "99a1497e3599cffd5945936f3552a4e0cb8b73dc", "parents": [ "554f4ffd3b2cd88e42007d069bc519563d0b459f" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Wed Jun 15 09:51:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:18 2011 -0700" }, "message": "octeon: Move the Cavium driver\n\nMove the Cavium driver to drivers/net/ethernet/octeon/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: David Daney \u003cdavid.daney@cavium.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: David Daney \u003cdavid.daney@cavium.com\u003e\n" }, { "commit": "554f4ffd3b2cd88e42007d069bc519563d0b459f", "tree": "3701f6d17551bc275d5622721c149521327faaea", "parents": [ "b544dbac41218fd015ac79455cfc1e57736e9b0c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 14 14:02:57 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:14 2011 -0700" }, "message": "hamachi/yellowfin: Move the packet engine drivers\n\nMove the packet engine drivers to drivers/net/ethernet/packetengines/\nand the necessary Kconfig and Makefile changes.\n\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "b544dbac41218fd015ac79455cfc1e57736e9b0c", "tree": "6881af397456d0237dbb123ccb585a1a8086c166", "parents": [ "de69a4f240a1d43bc6a587c836c5ce1c66e36f23" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 14 12:56:50 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:10 2011 -0700" }, "message": "davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers\n\nMove the Texas Instruments drivers to drivers/net/ethernet/ti/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Sriram \u003csrk@ti.com\u003e\nCC: Vinay Hegde \u003cvinay.hegde@ti.com\u003e\nCC: Cyril Chemparathy \u003ccyril@ti.com\u003e\nCC: Samuel Chessman \u003cchessman@tux.org\u003e\nCC: \u003ctorben.mathiasen@compaq.com\u003e\nCC: Eugene Konev \u003cejka@imfi.kspu.ru\u003e\nCC: Florian Fainelli \u003cflorian@openwrt.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "de69a4f240a1d43bc6a587c836c5ce1c66e36f23", "tree": "69cb310c3231a648b174b49cec66c03ccb18bc95", "parents": [ "e75ed60cbaf6a2b5f14f00d96d926110f983be6b" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon Jun 13 10:51:34 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:07 2011 -0700" }, "message": "s6gmac: Move the s6gmac drivers\n\nMove the s6gmac driver to drivers/net/ethernet/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Oskar Schirmer \u003cos@emlix.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "e75ed60cbaf6a2b5f14f00d96d926110f983be6b", "tree": "fcc6f765bfb782c34381b2801eba3c4d38077c99", "parents": [ "679ec0ef08afde98fd5b2d1aa9fb3e50cce657a0" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 01:15:34 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:41:04 2011 -0700" }, "message": "tsi108*: Move the Tundra driver\n\nMove the Tundra driver to drivers/net/ethernet/tundra/ and\nmake the necessary Kocnfig and Makefile changes.\n\nCC: Kong Lai \u003ckong.lai@tundra.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "679ec0ef08afde98fd5b2d1aa9fb3e50cce657a0", "tree": "885b5a1a357707d858d366651677c173f31fa68e", "parents": [ "57d0b7a0d77d0b770682e425ff3fa270c65a4eb5" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sun Jul 17 00:20:45 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:59 2011 -0700" }, "message": "nuvoton: Move the Nuvoton driver\n\nMove the Nuvoton driver into drivers/net/ethernet/nuvoton/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "57d0b7a0d77d0b770682e425ff3fa270c65a4eb5", "tree": "2e7181be255386fea20b21d13d92946bdb05f440", "parents": [ "8c7de408fd2caa11b8b3a1ed8a1b141ce127ad4e" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 16 23:50:52 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:54 2011 -0700" }, "message": "cirrus: Move the Cirrus network driver\n\nMove the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/\nand make the necessary Kconfig and Makefile changes\n\nCC: Hartley Sweeten \u003chsweeten@visionengravers.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "8c7de408fd2caa11b8b3a1ed8a1b141ce127ad4e", "tree": "19886abfa361eebc0113143263e593909b88b259", "parents": [ "4c78893b3d107e2a053c8f51c526510857c09858" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Mon Jun 13 08:43:49 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 03:40:44 2011 -0700" }, "message": "sis*: Move the Silicon Integrated Systems (SiS) drivers\n\nMove the SiS drivers into drivers/net/ethernet/sis/ and make the\nnecessary Kconfig and Makefile changes\n\nCC: Daniele Venzano \u003cvenza@brownhat.org\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "4c78893b3d107e2a053c8f51c526510857c09858", "tree": "52292bb85820c557aed39163bdc7e389dfed0142", "parents": [ "33d480ce6d43326e2541fd79b3548858a174ec3c" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 03:00:47 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 03:00:47 2011 -0700" }, "message": "cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "33d480ce6d43326e2541fd79b3548858a174ec3c", "tree": "c938ee8c07a2e0f33178069b55439a54188f38fa", "parents": [ "cd28ca0a3dd17c68d24b839602a0e6268ad28b5d" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Thu Aug 11 19:30:52 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:55:28 2011 -0700" }, "message": "net: cleanup some rcu_dereference_raw\n\nRCU api had been completed and rcu_access_pointer() or\nrcu_dereference_protected() are better than generic\nrcu_dereference_raw()\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "cd28ca0a3dd17c68d24b839602a0e6268ad28b5d", "tree": "3e77945743e2c74c36b6942ad5bfe46a07eb9caa", "parents": [ "68c3e5a7b91513010d2536e4bcd7bdd54d0e6acf" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Tue Aug 09 08:15:58 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:55:28 2011 -0700" }, "message": "neigh: reduce arp latency\n\nRemove the artificial HZ latency on arp resolution.\n\nInstead of firing a timer in one jiffy (up to 10 ms if HZ\u003d100), lets\nsend the ARP message immediately.\n\nBefore patch :\n\n# arp -d 192.168.20.108 ; ping -c 3 192.168.20.108\nPING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.\n64 bytes from 192.168.20.108: icmp_seq\u003d1 ttl\u003d64 time\u003d9.91 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d2 ttl\u003d64 time\u003d0.065 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d3 ttl\u003d64 time\u003d0.061 ms\n\nAfter patch :\n\n$ arp -d 192.168.20.108 ; ping -c 3 192.168.20.108\nPING 192.168.20.108 (192.168.20.108) 56(84) bytes of data.\n64 bytes from 192.168.20.108: icmp_seq\u003d1 ttl\u003d64 time\u003d0.152 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d2 ttl\u003d64 time\u003d0.064 ms\n64 bytes from 192.168.20.108: icmp_seq\u003d3 ttl\u003d64 time\u003d0.074 ms\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "68c3e5a7b91513010d2536e4bcd7bdd54d0e6acf", "tree": "a2ea612e175a67eb2fed43962782ed303da5125d", "parents": [ "8df158ac36fa0937f51c372f0c2d0ad1b86ebe4c" ], "author": { "name": "Eric Dumazet", "email": "eric.dumazet@gmail.com", "time": "Tue Aug 09 06:23:07 2011 +0000" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Fri Aug 12 02:54:22 2011 -0700" }, "message": "benet: fix build error on 32bit arch\n\nError comes from commit ac124ff973e27802797\n(be2net: cleanup and refactor stats code)\n\nERROR: \"__udivdi3\" [drivers/net/benet/be2net.ko] undefined!\n\nSigned-off-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCC: Sathya Perla \u003csathya.perla@emulex.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "8df158ac36fa0937f51c372f0c2d0ad1b86ebe4c", "tree": "320edf6c6b8ecc035b77ac8e91974d870490ad92", "parents": [ "bcc9736c6c201b0992c9d0a5b5a30c35138e5782" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jul 30 00:36:02 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:27:04 2011 -0700" }, "message": "toshiba: Move the Toshiba drivers\n\nMove the Toshiba ethernet drivers into drivers/net/ethernet/toshiba\nand make the necessary Kconfig and Makefile changes.\n\nCC: Geoff Levand \u003cgeoff@infradead.org\u003e\nCC: Jens Osterkamp \u003cJens.Osterkamp@de.ibm.com\u003e\nCC: Ishizaki Kou \u003ckou.ishizaki@toshiba.co.jp\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "bcc9736c6c201b0992c9d0a5b5a30c35138e5782", "tree": "b7993c2f5f0b7372a1ce0994476bfb7696901506", "parents": [ "ec21e2ec367697b4803e82662bdff6c8567745fc" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 03:26:31 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:18 2011 -0700" }, "message": "ks8*/ksz8*: Move the Micrel drivers\n\nMove the Micrel drivers into drivers/net/ethernet/micrel/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Ben Dooks \u003cben@simtec.co.uk\u003e\nCC: Tristram Ha \u003cTristram.Ha@micrel.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "ec21e2ec367697b4803e82662bdff6c8567745fc", "tree": "cdb42f597ff5e60516bdab59d306006fd1fafd1c", "parents": [ "5346ebf6db077d963e9d81af9df290d7f5532492" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 02:29:36 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:12 2011 -0700" }, "message": "freescale: Move the Freescale drivers\n\nMove the Freescale drivers into drivers/net/ethernet/freescale/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Sandeep Gopalpet \u003csandeep.kumar@freescale.com\u003e\nCC: Andy Fleming \u003cafleming@freescale.com\u003e\nCC: Shlomi Gridish \u003cgridish@freescale.com\u003e\nCC: Li Yang \u003cleoli@freescale.com\u003e\nCC: Pantelis Antoniou \u003cpantelis.antoniou@gmail.com\u003e\nCC: Vitaly Bordug \u003cvbordug@ru.mvista.com\u003e\nCC: Dan Malek \u003cdmalek@jlc.net\u003e\nCC: Sylvain Munaut \u003ctnt@246tNt.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "5346ebf6db077d963e9d81af9df290d7f5532492", "tree": "599c964dc98a13be7af437172b1002b5bf2cbf71", "parents": [ "f2148a472883ddf77626fff52b070655a8a0a788" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Sat Jun 11 01:13:22 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:22:08 2011 -0700" }, "message": "eth16i: Move the Allied Telesis/Fujitsu drivers\n\nMove the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Shingo Fujimoto \u003cshingo@flab.fujitsu.co.jp\u003e\nCC: Yutaka Tamiya \u003ctamy@flab.fujitsu.co.jp\u003e\nCC: Rene Schmit \u003crene@bss.lu\u003e\nCC: Mika Kuoppala \u003cmiku@iki.fi\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "f2148a472883ddf77626fff52b070655a8a0a788", "tree": "4224e4b1f7b7bbec8a5c5ebbd2ed1e2a69a89b9a", "parents": [ "527a626601de6ff89859de90883cc546892bf3ca" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 20:43:09 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:56 2011 -0700" }, "message": "via-*: Move the VIA drivers\n\nMove the VIA drivers into drivers/net/ethernet/via/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Roger Luethi \u003crl@hellgate.ch\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "527a626601de6ff89859de90883cc546892bf3ca", "tree": "5e30febb8d509e036cee5702676f386a0d4e4ad3", "parents": [ "1c1538be1da768fe0209a11e1bdf9dd7ab38905a" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 20:18:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:51 2011 -0700" }, "message": "skge/sky2/mv643xx/pxa168: Move the Marvell Ethernet drivers\n\nMove the Marvell Ethernet drivers into drivers/net/ethernet/marvell/\nand make the necessary Kconfig and Makefile changes.\n\nCC: Sachin Sanap \u003cssanap@marvell.com\u003e\nCC: Zhangfei Gao \u003czgao6@marvell.com\u003e\nCC: Philip Rakity \u003cprakity@marvell.com\u003e\nCC: Mark Brown \u003cmarkb@marvell.com\u003e\nCC: Lennert Buytenhek \u003cbuytenh@marvell.com\u003e\nCC: Stephen Hemminger \u003cshemminger@linux-foundation.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "1c1538be1da768fe0209a11e1bdf9dd7ab38905a", "tree": "ef41cb89bb9b7b576a938e20e78fb63ca53ace35", "parents": [ "9e13fbf7af3cb044f365e8df9c0e9277715cfc7c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 19:48:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:47 2011 -0700" }, "message": "pch_gbe: Move the OKI Semiconductor driver\n\nMove the OKI Semiconductor driver into driver/net/ethernet/oki-semi/\nand make the necessary Kconfig and Makefile changes.\n\nNote: there is no documented maintainer for this driver, so I CC\u0027d\nthe last 2 major contributors.\n\nCC: Tomoya \u003ctomoya-linux@dsn.okisemi.com\u003e\nCC: Toshiharu Okada \u003ctoshiharu-linux@dsn.okisemi.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "9e13fbf7af3cb044f365e8df9c0e9277715cfc7c", "tree": "9093489bce7301d1d58bdfa7d7142ba9fb83e49a", "parents": [ "8862bf1ed60de49550109b7023a0a33eb7db8b3c" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Jul 15 03:18:21 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:43 2011 -0700" }, "message": "seeq: Move the SEEQ drivers\n\nMove the drivers that use SEEQ chipset into drivers/net/ethernet/seeq\nand make the necessary Kconfig and Makefile changes.\n\nCC: Russell King \u003clinux@arm.linux.org.uk\u003e\nCC: Hamish Coleman \u003chamish@zot.apana.org.au\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "8862bf1ed60de49550109b7023a0a33eb7db8b3c", "tree": "76e2c24e847a986c139061f5d522aa94ce97e083", "parents": [ "a88394cfb58007cca945699545469017beb0d206" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 07:50:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:33 2011 -0700" }, "message": "ioc3-eth/meth: Move the SGI drivers\n\nMove the SGI drivers into drivers/net/ethernet/sgi/ and make the\nnecessary Kconfig and Makefile changes.\n\nCC: Ralf Baechle \u003cralf@linux-mips.org\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "a88394cfb58007cca945699545469017beb0d206", "tree": "7efa1efcaf18d1b8f7bede1f25acdfc0c657c086", "parents": [ "5ff2241dd42ade03572753f9ed7743719b47c474" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 07:15:19 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri Aug 12 00:21:25 2011 -0700" }, "message": "ewrk3/tulip: Move the DEC - Tulip drivers\n\nMove the DEC - Tulip driver into drivers/net/ethernet/dec/tulip/\nand make the necessary Kconfig and Makefile changes.\n\nThe Digital Equioment (DEC) driver ewrk3 was moved into\ndrivers/net/ethernet/dec/ and the remaining drivers (Tulip)\nwere moved into drivers/net/ethernet/dec/tulip/\n\nCC: Tobias Ringstrom \u003ctori@unhappy.mine.nu\u003e\nCC: Grant Grundler \u003cgrundler@parisc-linux.org\u003e\nCC: David Davies \u003cdavies@maniac.ultranet.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Grant Grundler \u003cgrundler@parisc-linux.org\u003e\n" }, { "commit": "5ff2241dd42ade03572753f9ed7743719b47c474", "tree": "3e4d2fbf7e4bbb7de3675800856572e93a67a703", "parents": [ "af3dcd2f449b7243a4c7b987125ffc40fad262f0" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 23:06:28 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:06:28 2011 -0700" }, "message": "spider_net: fix compile issue introduced by driver move\n\nBoth Spider net driver and Sun GEM driver use the sungem_phy.o object.\nThis fix creates a Kconfig object for sungem_phy (like MDIO) so that\nboth drivers require the SUNGEM_PHY object.\n\nThis has been compile tested for the Sun GEM driver.\n\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "af3dcd2f449b7243a4c7b987125ffc40fad262f0", "tree": "a1041245a24a472ec14932f3a1ab4426e8a344d6", "parents": [ "f08e6c0a87db74397ddbcca7cb189d50310d8ddf" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:05:05 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:05:05 2011 -0700" }, "message": "mlx4: Fix infiniband Kconfig dependencies.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f08e6c0a87db74397ddbcca7cb189d50310d8ddf", "tree": "110ac92d7a450fbb5f875e9af652e04a5cbbf07d", "parents": [ "2b133ad6e9e96798007e64eb912c42fa00adef0a" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 22:59:31 2011 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Aug 11 23:00:40 2011 -0700" }, "message": "cxgbi: Fix scsi Kconfig dependencies.\n\nReported-by: Stephen Rothwell \u003csfr@canb.auug.org.au\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "2b133ad6e9e96798007e64eb912c42fa00adef0a", "tree": "34d1760a9257b150289893cda05b4adfa1990306", "parents": [ "3401299a1b9e747cbf7de2cc0c8f6376c3cbe565" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 06:55:16 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:59 2011 -0700" }, "message": "atl*: Move the Atheros drivers\n\nMove the Atheros drivers into drivers/net/ethernet/atheros/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Jay Cliburn \u003cjcliburn@gmail.com\u003e\nCC: Chris Snook \u003cchris.snook@gmail.com\u003e\nCC: Jie Yang \u003cjie.yang@atheros.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "3401299a1b9e747cbf7de2cc0c8f6376c3cbe565", "tree": "bdc229019b5a31d8b3bcf422055eccb261259ca4", "parents": [ "a8fe65b8f031c5c0a7414059773eaa962e5243cb" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Fri May 20 00:04:35 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:50 2011 -0700" }, "message": "de6*/dl2k/sundance: Move the D-Link drivers\n\nMove the D-Link drivers into drivers/net/ethernet/dlink/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: Bjorn Ekwall \u003cbj0rn@blox.se\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nCC: Edward Peng \u003cedward_peng@dlink.com.tw\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "a8fe65b8f031c5c0a7414059773eaa962e5243cb", "tree": "7deefb4ca57299d315cf2e3f97b9919857eaacb4", "parents": [ "baf0fbfe7ea34cd676e3362a62033d8ca1c52d99" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu May 19 23:27:55 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:42 2011 -0700" }, "message": "8139*/atp/r8169/sc92031: Move the Realtek drivers\n\nMove the Realtek drivers into drivers/net/ethernet/realtek/ and make\nthe necessary Kconfig and Makefile changes.\n\nCC: Realtek linux nic maintainers \u003cnic_swsd@realtek.com\u003e\nCC: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\nCC: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nCC: Donald Becker \u003cbecker@scyld.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\n" }, { "commit": "baf0fbfe7ea34cd676e3362a62033d8ca1c52d99", "tree": "339eac61055d73c8301169ca46591eb7717b93a9", "parents": [ "b47da97728c045a8fd75f36e59ba08cddc8f2292" ], "author": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Tue Jun 21 17:55:27 2011 -0700" }, "committer": { "name": "Jeff Kirsher", "email": "jeffrey.t.kirsher@intel.com", "time": "Thu Aug 11 16:29:35 2011 -0700" }, "message": "ftgmac100/ftmac100: Move the Faraday drivers\n\nMove the Faraday driver into drivers/net/ethernet/faraday/ and\nmake the necessary Kconfig and Makefile changes.\n\nCC: \"Po-Yu Chuang\" \u003cratbert@faraday-tech.com\u003e\nSigned-off-by: Jeff Kirsher \u003cjeffrey.t.kirsher@intel.com\u003e\nAcked-by: Po-Yu Chuang \u003cratbert@faraday-tech.com\u003e\n" } ], "next": "b47da97728c045a8fd75f36e59ba08cddc8f2292" }