)]}'
{
  "log": [
    {
      "commit": "55f9c40ff632d03c527d6a6ceddcda0a224587a6",
      "tree": "215b843439f1d6b7620789ac6e919742db99b7a6",
      "parents": [
        "d5eab9152a3b4ce962c02ad0a0e4d0ec94aadd92",
        "eb7caf35951b1a56aabee028c1b20727abccc34f"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:59:19 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:59:19 2011 -0700"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:\n  n2_crypto: Attach on Niagara-T3.\n  n2rng: Attach on Niagara-T3.\n  sparc: Detect and handle UltraSPARC-T3 cpu types.\n  sparc: Don\u0027t do expensive hypervisor PCR write unless necessary.\n  sparc: Add T3 sun4v cpu type and hypervisor group defines.\n  sparc: Don\u0027t leave sparc_pmu_type NULL on sun4v.\n"
    },
    {
      "commit": "d5eab9152a3b4ce962c02ad0a0e4d0ec94aadd92",
      "tree": "3147f8de2805da0f026ea18103a9be46f3bc2a18",
      "parents": [
        "6140333d3656f62ac7e6a5af87e7fe92cfb8d655",
        "a051294423b015c5c89f2ed78f7fe0893b775098"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:58:19 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:58:19 2011 -0700"
      },
      "message": "Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net\n\n* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)\n  tg3: Remove 5719 jumbo frames and TSO blocks\n  tg3: Break larger frags into 4k chunks for 5719\n  tg3: Add tx BD budgeting code\n  tg3: Consolidate code that calls tg3_tx_set_bd()\n  tg3: Add partial fragment unmapping code\n  tg3: Generalize tg3_skb_error_unmap()\n  tg3: Remove short DMA check for 1st fragment\n  tg3: Simplify tx bd assignments\n  tg3: Reintroduce tg3_tx_ring_info\n  ASIX: Use only 11 bits of header for data size\n  ASIX: Simplify condition in rx_fixup()\n  Fix cdc-phonet build\n  bonding: reduce noise during init\n  bonding: fix string comparison errors\n  net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared\n  net: add IFF_SKB_TX_SHARED flag to priv_flags\n  net: sock_sendmsg_nosec() is static\n  forcedeth: fix vlans\n  gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e\n  gro: Only reset frag0 when skb can be pulled\n  ...\n"
    },
    {
      "commit": "6140333d3656f62ac7e6a5af87e7fe92cfb8d655",
      "tree": "d96f7ad2196b4383f5ca4396c956e24c82b2952c",
      "parents": [
        "6f56c218666b5c7eff354364357307d18c10058b",
        "58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:50:27 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Thu Jul 28 05:50:27 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://neil.brown.name/md\n\n* \u0027for-linus\u0027 of git://neil.brown.name/md: (75 commits)\n  md/raid10: handle further errors during fix_read_error better.\n  md/raid10: Handle read errors during recovery better.\n  md/raid10: simplify read error handling during recovery.\n  md/raid10: record bad blocks due to write errors during resync/recovery.\n  md/raid10:  attempt to fix read errors during resync/check\n  md/raid10:  Handle write errors by updating badblock log.\n  md/raid10: clear bad-block record when write succeeds.\n  md/raid10: avoid writing to known bad blocks on known bad drives.\n  md/raid10 record bad blocks as needed during recovery.\n  md/raid10: avoid reading known bad blocks during resync/recovery.\n  md/raid10 - avoid reading from known bad blocks - part 3\n  md/raid10: avoid reading from known bad blocks - part 2\n  md/raid10: avoid reading from known bad blocks - part 1\n  md/raid10: Split handle_read_error out from raid10d.\n  md/raid10: simplify/reindent some loops.\n  md/raid5: Clear bad blocks on successful write.\n  md/raid5.  Don\u0027t write to known bad block on doubtful devices.\n  md/raid5: write errors should be recorded as bad blocks if possible.\n  md/raid5: use bad-block log to improve handling of uncorrectable read errors.\n  md/raid5: avoid reading from known bad blocks.\n  ...\n"
    },
    {
      "commit": "eb7caf35951b1a56aabee028c1b20727abccc34f",
      "tree": "2cccd6418beedf7ce3b12e2d0f4123c43755dc8c",
      "parents": [
        "24f146696184cbe4b440179064a45dfddaad4cc4"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Jul 28 01:30:07 2011 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Jul 28 01:30:07 2011 -0700"
      },
      "message": "n2_crypto: Attach on Niagara-T3.\n\nA small modification was necessary since in the machine description\nfor \u0027n2cp\u0027 and \u0027ncp\u0027 nodes, there no longer is an \u0027intr\u0027 property.\n\nThat\u0027s OK because this property was always nothing more than an\narray of integers \u00271\u0027 ... \u0027nr_inos + 1\u0027 so we can just compute it\nin-place.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "24f146696184cbe4b440179064a45dfddaad4cc4",
      "tree": "b47f8a2a97d620e0542f90fd2dd620a87f4154ca",
      "parents": [
        "4ba991d3eb379fbaa22049e7002341e97a673685"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 23:33:03 2011 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Thu Jul 28 01:26:30 2011 -0700"
      },
      "message": "n2rng: Attach on Niagara-T3.\n\nAnd stop referring to Victoria Falls, as the attribute we\u0027re\ntalking about is whether the rng is multi-unit capable which\napplies to several chip variants now.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "a051294423b015c5c89f2ed78f7fe0893b775098",
      "tree": "840072c6503d5f0c82623d732a3b352edbd15a3c",
      "parents": [
        "e31aa9870627106aebddd280aab8ecb2f493246a"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:54 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:32 2011 -0700"
      },
      "message": "tg3: Remove 5719 jumbo frames and TSO blocks\n\nThe A0 revision of this chip is the only device that requires these\nfeatures to be disabled.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "e31aa9870627106aebddd280aab8ecb2f493246a",
      "tree": "c771dda9a09b07382947da52b82d093de9b951ea",
      "parents": [
        "84b67b27e9531e9a70c9e8cd952d66c55f4d0ddb"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:53 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:32 2011 -0700"
      },
      "message": "tg3: Break larger frags into 4k chunks for 5719\n\nThe 5719 has bug where RDMAs larger than 4k can cause problems.  This\npatch works around the problem by dividing larger DMA requests into\nsomething the hardware can handle.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "84b67b27e9531e9a70c9e8cd952d66c55f4d0ddb",
      "tree": "f082a966a82ebc803f1f4d7cfccf057b3b0a8017",
      "parents": [
        "d1a3b7377d3b6a01ec5f70adb32173b13233aabf"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:52 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:32 2011 -0700"
      },
      "message": "tg3: Add tx BD budgeting code\n\nAs the driver breaks large skb fragments into smaller submissions to the\nhardware, there is a new danger that BDs might get exhausted before all\nfragments have been mapped.  This patch adds code to make sure tx BDs\naren\u0027t oversubscribed and flag the condition if it happens.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "d1a3b7377d3b6a01ec5f70adb32173b13233aabf",
      "tree": "ad1d5204140560a8724a104bbc1dccbc0704307d",
      "parents": [
        "e01ee14d499e5d09c0a9db0cac2545a018849e3d"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:51 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Consolidate code that calls tg3_tx_set_bd()\n\nThis patch consolidates all code that populates tx BDs into a single\nroutine.  Setting tx BDs needs to be more carefully controlled to see if\nworkarounds need to be applied.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "e01ee14d499e5d09c0a9db0cac2545a018849e3d",
      "tree": "752b0783203f4131dbe2d9af945f5090003646e2",
      "parents": [
        "0d681b27b0efc962a3038a316e78373de7bfe1ce"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:50 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Add partial fragment unmapping code\n\nThe following patches are going to break skb fragments into smaller\nsizes.  This patch attempts to make the change easier to digest by only\naddressing the skb teardown portion.\n\nThe patch modifies the driver to skip over any BDs that have a flag set\nthat indicates the BD isn\u0027t the beginning of an skb fragment.  Such BDs\nwere a result of segmentation and do not need a pci_unmap_page() call.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "0d681b27b0efc962a3038a316e78373de7bfe1ce",
      "tree": "0ff87deba13d372b5f8262e741dc121c0e07f32f",
      "parents": [
        "13350ea78bd687a229af0f6052d2f45aa50a6524"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:49 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Generalize tg3_skb_error_unmap()\n\nIn the following patches, unmapping skb fragments will get just as\ncomplicated as mapping them.  This patch generalizes\ntg3_skb_error_unmap() and makes it the one-stop-shop for skb unmapping.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "13350ea78bd687a229af0f6052d2f45aa50a6524",
      "tree": "9fbb3bdd4e1b0e1e65e65ff12831124434fb4ae5",
      "parents": [
        "92cd3a17ce9c719abb4c28dee3438e0c641f8de4"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:48 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Remove short DMA check for 1st fragment\n\nThe first fragment of an skb should always be greater than 8 bytes.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "92cd3a17ce9c719abb4c28dee3438e0c641f8de4",
      "tree": "f4883d546a721e2ee9320f66d918f5845cfedf77",
      "parents": [
        "df8944cf5cd3794c46e95e0404038376ee7f8dda"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:47 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Simplify tx bd assignments\n\nIn the following patches, the process the driver will use to assign skb\nfragments to transmit BDs will get more complicated.  To prepare for\nthat new code, this patch seeks to simplify how transmit BDs are\npopulated.  It does this by separating the code that assigns the BD\nmembers from the logic that controls how the fields are set.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "df8944cf5cd3794c46e95e0404038376ee7f8dda",
      "tree": "874ad0e2e40510bcc619af76a3faf55c9e587a55",
      "parents": [
        "bca0beb9363f8487ac902931a50eb00180a2d14a"
      ],
      "author": {
        "name": "Matt Carlson",
        "email": "mcarlson@broadcom.com",
        "time": "Wed Jul 27 14:20:46 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "tg3: Reintroduce tg3_tx_ring_info\n\nThe following patches will require the use of an additional flag in the\nring_info structure.  The use of this flag is tx path specific, so this\npatch defines a specialized ring_info structure.\n\nSigned-off-by: Matt Carlson \u003cmcarlson@broadcom.com\u003e\nReviewed-by: Michael Chan \u003cmchan@broadcom.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "bca0beb9363f8487ac902931a50eb00180a2d14a",
      "tree": "f7c87ac7a9f8c055a883c695ad8c8b0db336edd6",
      "parents": [
        "bc466e678d0a98f445bf3f9c76fedf18e7dcc6b0"
      ],
      "author": {
        "name": "Marek Vasut",
        "email": "marek.vasut@gmail.com",
        "time": "Tue Jul 26 16:44:47 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "ASIX: Use only 11 bits of header for data size\n\nThe AX88772B uses only 11 bits of the header for the actual size. The other bits\nare used for something else. This causes dmesg full of messages:\n\n\tasix_rx_fixup() Bad Header Length\n\nThis patch trims the check to only 11 bits. I believe on older chips, the\nremaining 5 top bits are unused.\n\nSigned-off-by: Marek Vasut \u003cmarek.vasut@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "bc466e678d0a98f445bf3f9c76fedf18e7dcc6b0",
      "tree": "02ae33658d0737ae61aa62ca85f8c118a0af71f9",
      "parents": [
        "a0295a3b6775ab88f5883684e14bbda8d287822d"
      ],
      "author": {
        "name": "Marek Vasut",
        "email": "marek.vasut@gmail.com",
        "time": "Tue Jul 26 16:44:46 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "ASIX: Simplify condition in rx_fixup()\n\nSigned-off-by: Marek Vasut \u003cmarek.vasut@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "a0295a3b6775ab88f5883684e14bbda8d287822d",
      "tree": "05fdace7966c34aadd884c0dd2164032040b23e3",
      "parents": [
        "b2730f4f842b987c818023a8003e6426cf996985"
      ],
      "author": {
        "name": "Chris Clayton",
        "email": "chris2553@googlemail.com",
        "time": "Tue Jul 26 12:20:22 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:31 2011 -0700"
      },
      "message": "Fix cdc-phonet build\n\nTry to send to correct address this time!\n\n----------  Forwarded Message  ----------\n\nSubject: [PATCH] Fix cdc-phonet build\nDate: Saturday 23 Jul 2011\nFrom: Chris Clayton \u003cchris2553@googlemail.com\u003e\nTo: linux-net@vger.kernel.org\n\ncdc-phonet does not presently build on linux-3.0 because there is no entry for it in\ndrivers/net/Makefile. This patch adds that entry.\n\nSigned-off-by: Chris Clayton \u003cchris2553@googlemail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "b2730f4f842b987c818023a8003e6426cf996985",
      "tree": "b84df061504072115fbc7d455730304c3129b5c0",
      "parents": [
        "f4bb2e9c4fa9e5fdddf90589703613fd1a9c519f"
      ],
      "author": {
        "name": "Andy Gospodarek",
        "email": "andy@greyhouse.net",
        "time": "Wed Jul 27 10:09:26 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:30 2011 -0700"
      },
      "message": "bonding: reduce noise during init\n\nOn Tue, Jul 26, 2011 at 05:40:27PM -0700, Joe Perches wrote:\n\u003e On Tue, 2011-07-26 at 17:37 -0700, Jay Vosburgh wrote:\n\u003e \u003e Joe Perches \u003cjoe@perches.com\u003e wrote:\n\u003e \u003e \u003eI\u0027d prefer you don\u0027t separate the format string\n\u003e \u003e \u003einto multiple pieces.\n\u003e \u003e Why not?  To me, it looks easier to read split into sections\n\u003e \u003e that don\u0027t wrap lines.\n\u003e\n\u003e Harder to grep for a dmesg and the\n\u003e defect rate of these split formats is\n\u003e typically higher than single strings\n\u003e because of bad spacing between string\n\u003e segments.\n\u003e\n\nI noticed that you took some time back in late 2009 to \u0027consolidate\u0027 the\nsplit format-strings present in the bonding driver at the time and I\u0027ve\ndecided I\u0027m fine to leave them the way they are.  The main point of my\npatch was to change the output and I would like to get that included.\nHere is my updated patch...\n\nSubject: [PATCH net-next-2.6 v2] bonding: reduce noise during init\n\nMany are using sysfs to configure bonding rather than module options, so\nthere is no need for bonding to throw this warning in normal cases.\n\nKeep the message around when debugging is enabled as it might be useful\nfor someone desperate enough to enable debugging, but eliminate it\notherwise.\n\nSigned-off-by: Andy Gospodarek \u003candy@greyhouse.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "f4bb2e9c4fa9e5fdddf90589703613fd1a9c519f",
      "tree": "5f47d2f426c63e1c1d787fbb69e9d52ba6136038",
      "parents": [
        "550fd08c2cebad61c548def135f67aba284c6162"
      ],
      "author": {
        "name": "Andy Gospodarek",
        "email": "andy@greyhouse.net",
        "time": "Tue Jul 26 11:12:27 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:30 2011 -0700"
      },
      "message": "bonding: fix string comparison errors\n\nWhen a bond contains a device where one name is the subset of another\n(eth1 and eth10, for example), one cannot properly set the primary\ndevice or the currently active device.\n\nThis was reported and based on work by Takuma Umeya.  I also verified\nthe problem and tested that this fix resolves it.\n\nV2: A few did not like the the current code or my changes, so I\nrefactored bonding_store_primary and bonding_store_active_slave to be a\nbit cleaner, dropped the use of strnicmp since we did not really need\nthe comparison to be case insensitive, and formatted the input string\nfrom sysfs so a comparison to IFNAMSIZ could be used.\n\nI also discovered an error in bonding_store_active_slave that would\nmodify bond-\u003eprimary_slave rather than bond-\u003ecurr_active_slave before\nforcing the bonding driver to choose a new active slave.\n\nV3: Actually sending the proper patch....\n\nSigned-off-by: Andy Gospodarek \u003candy@greyhouse.net\u003e\nReported-by: Takuma Umeya \u003ctumeya@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "550fd08c2cebad61c548def135f67aba284c6162",
      "tree": "8aa7c4d20a9faeb42261b75cfa38d8fd27b574ff",
      "parents": [
        "d8873315065f1f527c7c380402cf59b1e1d0ae36"
      ],
      "author": {
        "name": "Neil Horman",
        "email": "nhorman@tuxdriver.com",
        "time": "Tue Jul 26 06:05:38 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:30 2011 -0700"
      },
      "message": "net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared\n\nAfter the last patch, We are left in a state in which only drivers calling\nether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real\nhardware call ether_setup for their net_devices and don\u0027t hold any state in\ntheir skbs.  There are a handful of drivers that violate this assumption of\ncourse, and need to be fixed up.  This patch identifies those drivers, and marks\nthem as not being able to support the safe transmission of skbs by clearning the\nIFF_TX_SKB_SHARING flag in priv_flags\n\nSigned-off-by: Neil Horman \u003cnhorman@tuxdriver.com\u003e\nCC: Karsten Keil \u003cisdn@linux-pingi.de\u003e\nCC: \"David S. Miller\" \u003cdavem@davemloft.net\u003e\nCC: Jay Vosburgh \u003cfubar@us.ibm.com\u003e\nCC: Andy Gospodarek \u003candy@greyhouse.net\u003e\nCC: Patrick McHardy \u003ckaber@trash.net\u003e\nCC: Krzysztof Halasa \u003ckhc@pm.waw.pl\u003e\nCC: \"John W. Linville\" \u003clinville@tuxdriver.com\u003e\nCC: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\nCC: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nCC: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "0891b0e08937aaec2c4734acb94c5ff8042313bb",
      "tree": "4d02c8d55b2f51708d873c914a778935c18c3e9c",
      "parents": [
        "b852b720877e6b8e12b95a7cb4e00ea351b8cbfc"
      ],
      "author": {
        "name": "Jiri Pirko",
        "email": "jpirko@redhat.com",
        "time": "Tue Jul 26 10:19:28 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:30 2011 -0700"
      },
      "message": "forcedeth: fix vlans\n\nFor some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is\nstill set and some pseudorandom vids appear. So check for\nNETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan\nmode on probe.\n\nSigned-off-by: Jiri Pirko \u003cjpirko@redhat.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "b852b720877e6b8e12b95a7cb4e00ea351b8cbfc",
      "tree": "c28bbc1a90e4d79f51154c98b507410579a25cf9",
      "parents": [
        "b49179c071b89423e1f6c50f6fa3d48d8158bc35"
      ],
      "author": {
        "name": "Sebastian Pöhn",
        "email": "sebastian.belden@googlemail.com",
        "time": "Tue Jul 26 00:03:13 2011 +0000"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:39:30 2011 -0700"
      },
      "message": "gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e\n\ncommit 87c288c6e9aa31720b72e2bc2d665e24e1653c3e \"gianfar: do vlan cleanup\" has two issues:\n# permutation of rx and tx flags\n# enabling vlan tag insertion by default (this leads to unusable connections on some configurations)\n\nIf VLAN insertion is requested (via ethtool) it will be set at an other point ...\n\nSigned-off-by: Sebastian Poehn \u003csebastian.poehn@belden.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "b49179c071b89423e1f6c50f6fa3d48d8158bc35",
      "tree": "b6aca473839c2c9d7b72bafffa91e6dd6471f9a3",
      "parents": [
        "17dd759c67f21e34f2156abcf415e1f60605a188",
        "e5036c2575b244851637a81efc4104c076c4fa21"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:18:47 2011 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Wed Jul 27 22:18:47 2011 -0700"
      },
      "message": "Merge branch \u0027for-davem\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6\n"
    },
    {
      "commit": "95b6886526bb510b8370b625a49bc0ab3b8ff10f",
      "tree": "2862606224820d200be12d2092dcd26df1654b80",
      "parents": [
        "22712200e175e0df5c7f9edfe6c6bf5c94c23b83",
        "29412f0f6a19e34336368f13eab848091c343952"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 19:26:38 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 19:26:38 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits)\n  tpm_nsc: Fix bug when loading multiple TPM drivers\n  tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block\n  tpm: Fix compilation warning when CONFIG_PNP is not defined\n  TOMOYO: Update kernel-doc.\n  tpm: Fix a typo\n  tpm_tis: Probing function for Intel iTPM bug\n  tpm_tis: Fix the probing for interrupts\n  tpm_tis: Delay ACPI S3 suspend while the TPM is busy\n  tpm_tis: Re-enable interrupts upon (S3) resume\n  tpm: Fix display of data in pubek sysfs entry\n  tpm_tis: Add timeouts sysfs entry\n  tpm: Adjust interface timeouts if they are too small\n  tpm: Use interface timeouts returned from the TPM\n  tpm_tis: Introduce durations sysfs entry\n  tpm: Adjust the durations if they are too small\n  tpm: Use durations returned from TPM\n  TOMOYO: Enable conditional ACL.\n  TOMOYO: Allow using argv[]/envp[] of execve() as conditions.\n  TOMOYO: Allow using executable\u0027s realpath and symlink\u0027s target as conditions.\n  TOMOYO: Allow using owner/group etc. of file objects as conditions.\n  ...\n\nFix up trivial conflict in security/tomoyo/realpath.c\n"
    },
    {
      "commit": "58c54fcca3bac5bf9290cfed31c76e4c4bfbabaf",
      "tree": "25f663873429468c3b582bc7544f983759b7592e",
      "parents": [
        "5e5702898e93eee7d69b6efde109609a89a61001"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "message": "md/raid10: handle further errors during fix_read_error better.\n\nIf we find more read/write errors we should record a bad block before\nfailing the device.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "5e5702898e93eee7d69b6efde109609a89a61001",
      "tree": "87f47cc7e66da78befd16af6d479761b70f7adea",
      "parents": [
        "e684e41db3bad44f1262341300b827c0d94ae220"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "message": "md/raid10: Handle read errors during recovery better.\n\nCurrently when we get a read error during recovery, we simply abort\nthe recovery.\n\nInstead, repeat the read in page-sized blocks.\nOn successful reads, write to the target.\nOn read errors, record a bad block on the destination,\nand only if that fails do we abort the recovery.\n\nAs we now retry reads we need to know where we read from.  This was in\nbi_sector but that can be changed during a read attempt.\nSo store the correct from_addr and to_addr in the r10_bio for later\naccess.\n\n\nSigned-off-by: NeilBrown\u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "e684e41db3bad44f1262341300b827c0d94ae220",
      "tree": "a3ff2ec212d4f69a06a64b3a6841895b8cf85673",
      "parents": [
        "1a0b7cd82657a590f163b090bd9123a3a6b9aae4"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "message": "md/raid10: simplify read error handling during recovery.\n\nIf a read error is detected during recovery the code currently\nfails the read device.\nThis isn\u0027t really necessary.  recovery_request_write will signal\na write error to end_sync_write and it will record a write\nerror on the destination device which will record a bad block\nthere or kick it from the array.\n\nSo just remove this call to do md_error.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "1a0b7cd82657a590f163b090bd9123a3a6b9aae4",
      "tree": "0dc3ccf6ad6ad88283e6d7924c38524865866cba",
      "parents": [
        "f84ee364dd15af11cada1e673f94128f62db189e"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "message": "md/raid10: record bad blocks due to write errors during resync/recovery.\n\nIf we get a write error during resync/recovery don\u0027t fail the device\nbut instead record a bad block.  If that fails we can then fail the\ndevice.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "f84ee364dd15af11cada1e673f94128f62db189e",
      "tree": "e57fc87130b8bb6958413f39ae51718977540152",
      "parents": [
        "bd870a16c5946d86126f7203db3c73b71de0a1d8"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:25 2011 +1000"
      },
      "message": "md/raid10:  attempt to fix read errors during resync/check\n\nWe already attempt to fix read errors found during normal IO\nand a \u0027repair\u0027 process.\nIt is best to try to repair them at any time they are found,\nso move a test so that during sync and check a read error will\nbe corrected by over-writing with good data.\n\nIf both (all) devices have known bad blocks in the sync section we\nwon\u0027t try to fix even though the bad blocks might not overlap.  That\nshould be considered later.\n\nAlso if we hit a read error during recovery we don\u0027t try to fix it.\nIt would only be possible to fix if there were at least three copies\nof data, which is not very common with RAID10.  But it should still\nbe considered later.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "bd870a16c5946d86126f7203db3c73b71de0a1d8",
      "tree": "3492f61a441266c796b8a08ec30c06f7f6f27fbc",
      "parents": [
        "749c55e942d91cb27045fe2eb313aa5afe68ae0b"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10:  Handle write errors by updating badblock log.\n\nWhen we get a write error (in the data area, not in metadata),\nupdate the badblock log rather than failing the whole device.\n\nAs the write may well be many blocks, we trying writing each\nblock individually and only log the ones which fail.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "749c55e942d91cb27045fe2eb313aa5afe68ae0b",
      "tree": "ddf80a1eb3ef9005bc209c1c4946916b89c22a33",
      "parents": [
        "d4432c23be957ff061f7b23fd60e8506cb472a55"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10: clear bad-block record when write succeeds.\n\nIf we succeed in writing to a block that was recorded as\nbeing bad, we clear the bad-block record.\n\nThis requires some delayed handling as the bad-block-list update has\nto happen in process-context.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "d4432c23be957ff061f7b23fd60e8506cb472a55",
      "tree": "1e9e8cbc75721e62300bb2251658de870bf79d8a",
      "parents": [
        "e875ecea266a543e643b19e44cf472f1412708f9"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10: avoid writing to known bad blocks on known bad drives.\n\nWriting to known bad blocks on drives that have seen a write error\nis asking for trouble.  So try to avoid these blocks.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "e875ecea266a543e643b19e44cf472f1412708f9",
      "tree": "b602d08f7aa4a743d3c27ad55e347d36991f0814",
      "parents": [
        "40c356ce5ad1a6be817825e1da1bc7494349cc6d"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10 record bad blocks as needed during recovery.\n\nWhen recovering one or more devices, if all the good devices have\nbad blocks we should record a bad block on the device being rebuilt.\n\nIf this fails, we need to abort the recovery.\n\nTo ensure we don\u0027t think that we aborted later than we actually did,\nwe need to move the check for MD_RECOVERY_INTR earlier in md_do_sync,\nin particular before mddev-\u003ecurr_resync is updated.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "40c356ce5ad1a6be817825e1da1bc7494349cc6d",
      "tree": "6843d537ecdfda6c03860455c187b775bc6dec97",
      "parents": [
        "8dbed5cebdf6796bf2618457b3653cf820934366"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10: avoid reading known bad blocks during resync/recovery.\n\nDuring resync/recovery limit the size of the request to avoid\nreading into a bad block that does not start at-or-before the current\nread address.\n\nSimilarly if there is a bad block at this address, don\u0027t allow the\ncurrent request to extend beyond the end of that bad block.\n\nNow that we don\u0027t ever read from known bad blocks, it is safe to allow\ndevices with those blocks into the array.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "8dbed5cebdf6796bf2618457b3653cf820934366",
      "tree": "b8e8421a3aae1ee8f21df97f76b116fd0a0a9b1c",
      "parents": [
        "7399c31bc92a26bb8388a73f8e14acadcc512fe5"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:24 2011 +1000"
      },
      "message": "md/raid10 - avoid reading from known bad blocks - part 3\n\nWhen attempting to repair a read error, don\u0027t read from\ndevices with a known bad block.\n\nAs we are only reading PAGE_SIZE blocks, we don\u0027t try to\nnarrow down to smaller regions in the hope that only part of this\npage is bad - it isn\u0027t worth the effort.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "7399c31bc92a26bb8388a73f8e14acadcc512fe5",
      "tree": "0f1d9904fde1d5258c84643a26947288251b9776",
      "parents": [
        "856e08e23762dfb92ffc68fd0a8d228f9e152160"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "message": "md/raid10: avoid reading from known bad blocks - part 2\n\nWhen redirecting a read error to a different device, we must\nagain avoid bad blocks and possibly split the request.\n\nSpin_lock typo fixed thanks to Dan Carpenter \u003cerror27@gmail.com\u003e\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "856e08e23762dfb92ffc68fd0a8d228f9e152160",
      "tree": "fa9977a39da542eebb2129712703c11009a56ff2",
      "parents": [
        "560f8e5532d63a314271bfb99d3d1d53c938ed14"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "message": "md/raid10: avoid reading from known bad blocks - part 1\n\nThis patch just covers the basic read path:\n 1/ read_balance needs to check for badblocks, and return not only\n    the chosen slot, but also how many good blocks are available\n    there.\n 2/ read submission must be ready to issue multiple reads to\n    different devices as different bad blocks on different devices\n    could mean that a single large read cannot be served by any one\n    device, but can still be served by the array.\n    This requires keeping count of the number of outstanding requests\n    per bio.  This count is stored in \u0027bi_phys_segments\u0027\n\nOn read error we currently just fail the request if another target\ncannot handle the whole request.  Next patch refines that a bit.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "560f8e5532d63a314271bfb99d3d1d53c938ed14",
      "tree": "c47cbeb54b1e98f626a3e4af1bf0a184a831d3b9",
      "parents": [
        "1294b9c973251a5e68b62c9b40dd914517bda675"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "message": "md/raid10: Split handle_read_error out from raid10d.\n\nraid10d() is too big and is about to get bigger, so split\nhandle_read_error() out as a separate function.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "1294b9c973251a5e68b62c9b40dd914517bda675",
      "tree": "45547cfff8997a3a633490341f8166dc6d00e962",
      "parents": [
        "b84db560ead5417b5594349512baf8837959df4f"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "message": "md/raid10: simplify/reindent some loops.\n\nWhen a loop ends with a large if, it can be neater to change the\nif to invert the condition and just \u0027continue\u0027.\nThen the body of the if can be indented to a lower level.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "b84db560ead5417b5594349512baf8837959df4f",
      "tree": "77f8cfe305a32ace5f4ead4eb820e3f9fa14ce67",
      "parents": [
        "73e92e51b7969ef5477dd28fe2ae4d77675896f4"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:23 2011 +1000"
      },
      "message": "md/raid5: Clear bad blocks on successful write.\n\nOn a successful write to a known bad block, flag the sh\nso that raid5d can remove the known bad block from the list.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "73e92e51b7969ef5477dd28fe2ae4d77675896f4",
      "tree": "05f3d45d6c686abed79c0e5fac1d0b61ae9f93bd",
      "parents": [
        "bc2607f393bd4fb844c1886a02af929ca0372056"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "message": "md/raid5.  Don\u0027t write to known bad block on doubtful devices.\n\nIf a device has seen write errors, don\u0027t write to any known\nbad blocks on that device.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "bc2607f393bd4fb844c1886a02af929ca0372056",
      "tree": "45c7f9c538b5e196e389454286771f3beb8628ba",
      "parents": [
        "7f0da59bdc2f65795a57009d78f7753d3aea1de3"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "message": "md/raid5: write errors should be recorded as bad blocks if possible.\n\nWhen a write error is detected, don\u0027t mark the device as failed\nimmediately but rather record the fact for handle_stripe to deal with.\n\nHandle_stripe then attempts to record a bad block.  Only if that fails\ndoes the device get marked as faulty.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "7f0da59bdc2f65795a57009d78f7753d3aea1de3",
      "tree": "4ab3ae7188122657c12dfab61626d96360fb6240",
      "parents": [
        "31c176ecdf3563140e6395249eda51a18130d9f6"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "message": "md/raid5: use bad-block log to improve handling of uncorrectable read errors.\n\nIf we get an uncorrectable read error - record a bad block rather than\nfailing the device.\nAnd if these errors (which may be due to known bad blocks) cause\nrecovery to be impossible, record a bad block on the recovering\ndevices, or abort the recovery.\n\nAs we might abort a recovery without failing a device we need to teach\nRAID5 about recovery_disabled handling.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "31c176ecdf3563140e6395249eda51a18130d9f6",
      "tree": "5ad7dba363214e9d36fa921c221316d2597078ef",
      "parents": [
        "62096bce231b3760882ed91205fc84682d6b0529"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:39:22 2011 +1000"
      },
      "message": "md/raid5: avoid reading from known bad blocks.\n\nThere are two times that we might read in raid5:\n1/ when a read request fits within a chunk on a single\n   working device.\n   In this case, if there is any bad block in the range of\n   the read, we simply fail the cache-bypass read and\n   perform the read though the stripe cache.\n\n2/ when reading into the stripe cache.  In this case we\n   mark as failed any device which has a bad block in that\n   strip (1 page wide).\n   Note that we will both avoid reading and avoid writing.\n   This is correct (as we will never read from the block, there\n   is no point writing), but not optimal (as writing could \u0027fix\u0027\n   the error) - that will be addressed later.\n\nIf we have not seen any write errors on the device yet, we treat a bad\nblock like a recent read error.  This will encourage an attempt to fix\nthe read error which will either generate a write error, or will\nensure good data is stored there.  We don\u0027t yet forget the bad block\nin that case.  That comes later.\n\nNow that we honour bad blocks when reading we can allow devices with\nbad blocks into the array.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "62096bce231b3760882ed91205fc84682d6b0529",
      "tree": "90b8a89be6f3c1983e88a4b0fe9d5a0e15ccda7e",
      "parents": [
        "3a9f28a5117e00a868dd8b4395f9a707ae56764b"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:38:13 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:38:13 2011 +1000"
      },
      "message": "md/raid1: factor several functions out or raid1d()\n\nraid1d is too big with several deep branches.\nSo separate them out into their own functions.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "3a9f28a5117e00a868dd8b4395f9a707ae56764b",
      "tree": "36fe0fc7a7ccfc0da03dea546286b7bdef581246",
      "parents": [
        "d8f05d2995d467a91db1af01637e6ffd94660ca8"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:33:42 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:33:42 2011 +1000"
      },
      "message": "md/raid1: improve handling of read failure during recovery.\n\nIf we cannot read a block from anywhere during recovery, there is\nnow a better approach than just giving up.\nWe can record a bad block on each device and keep going - being\ncareful not to clear the bad block when a write succeeds as it might -\nit will be a write of incorrect data.\n\nWe have now reached the state where - for raid1 - we only call\nmd_error if md_set_badblocks has failed.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "d8f05d2995d467a91db1af01637e6ffd94660ca8",
      "tree": "e35959bc4f6c370c982df8222eb818c720b94ffd",
      "parents": [
        "cd5ff9a16f0831f68c1024d5d776075b5123b034"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:33:00 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:33:00 2011 +1000"
      },
      "message": "md/raid1: record badblocks found during resync etc.\n\nIf we find a bad block while writing as part of resync/recovery we\nneed to report that back to raid1d which must record the bad block,\nor fail the device.\n\nSimilarly when fixing a read error, a further error should just\nrecord a bad block if possible rather than failing the device.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "cd5ff9a16f0831f68c1024d5d776075b5123b034",
      "tree": "490e297bde3d0c52b55d38b38ed1cdb5b5b6f43e",
      "parents": [
        "2ca68f5ed7383733102ee53cd8fa4021ecc3b275"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:32:41 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:32:41 2011 +1000"
      },
      "message": "md/raid1:  Handle write errors by updating badblock log.\n\nWhen we get a write error (in the data area, not in metadata),\nupdate the badblock log rather than failing the whole device.\n\nAs the write may well be many blocks, we trying writing each\nblock individually and only log the ones which fail.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "2ca68f5ed7383733102ee53cd8fa4021ecc3b275",
      "tree": "29543cff802770d90380b889cf8b0cc01e7d1814",
      "parents": [
        "4367af556133723d0f443e14ca8170d9447317cb"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:32:10 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:32:10 2011 +1000"
      },
      "message": "md/raid1: store behind-write pages in bi_vecs.\n\nWhen performing write-behind we allocate pages to store the data\nduring write.\nPreviously we just keep a list of pages.  Now we keep a list of\nbi_vec which includes offset and size.\nThis means that the r1bio has complete information to create a new\nbio which will be needed for retrying after write errors.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "4367af556133723d0f443e14ca8170d9447317cb",
      "tree": "d87bb40920f0f43cea586b7dd99b45f713ffd614",
      "parents": [
        "1f68f0c4b677ccd6935ff61e4e6888787505f8dc"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:49 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:49 2011 +1000"
      },
      "message": "md/raid1: clear bad-block record when write succeeds.\n\nIf we succeed in writing to a block that was recorded as\nbeing bad, we clear the bad-block record.\n\nThis requires some delayed handling as the bad-block-list update has\nto happen in process-context.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "1f68f0c4b677ccd6935ff61e4e6888787505f8dc",
      "tree": "aaff73efbc3fb7b6092eb2106e142e1684c4b554",
      "parents": [
        "0b7d83865cb7a60b1768212c1e60b8fd7c280506"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "message": "md/raid1: avoid writing to known-bad blocks on known-bad drives.\n\nIf we have seen any write error on a drive, then don\u0027t write to\nany known-bad blocks on that drive.\nIf necessary, we divide the write request up into pieces just\nlike we do for reads, so each piece is either all written or\nall not written to any given drive.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "de393cdea66cbd63c90725663f400c76faf1b255",
      "tree": "6a2bf37bee98bf7de42856f904bd23c81e082f8e",
      "parents": [
        "d7a9d443bc8a75a24873c0506f50051edfedc714"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "message": "md: make it easier to wait for bad blocks to be acknowledged.\n\nIt is only safe to choose not to write to a bad block if that bad\nblock is safely recorded in metadata - i.e. if it has been\n\u0027acknowledged\u0027.\n\nIf it hasn\u0027t we need to wait for the acknowledgement.\n\nWe support that using rdev-\u003eblocked wait and\nmd_wait_for_blocked_rdev by introducing a new device flag\n\u0027BlockedBadBlock\u0027.\n\nThis flag is only advisory.\nIt is cleared whenever we acknowledge a bad block, so that a waiter\ncan re-check the particular bad blocks that it is interested it.\n\nIt should be set by a caller when they find they need to wait.\nThis (set after test) is inherently racy, but as\nmd_wait_for_blocked_rdev already has a timeout, losing the race will\nhave minimal impact.\n\nWhen we clear \"Blocked\" was also clear \"BlockedBadBlocks\" incase it\nwas set incorrectly (see above race).\n\nWe also modify the way we manage \u0027Blocked\u0027 to fit better with the new\nhandling of \u0027BlockedBadBlocks\u0027 and to make it consistent between\nexternally managed and internally managed metadata.   This requires\nthat each raidXd loop checks if the metadata needs to be written and\ntriggers a write (md_check_recovery) if needed.  Otherwise a queued\nwrite request might cause raidXd to wait for the metadata to write,\nand only that thread can write it.\n\nBefore writing metadata, we set FaultRecorded for all devices that\nare Faulty, then after writing the metadata we clear Blocked for any\ndevice for which the Fault was certainly Recorded.\n\nThe \u0027faulty\u0027 device flag now appears in sysfs if the device is faulty\n*or* it has unacknowledged bad blocks.  So user-space which does not\nunderstand bad blocks can continue to function correctly.\nUser space which does, should not assume a device is faulty until it\nsees the \u0027faulty\u0027 flag, and then sees the list of unacknowledged bad\nblocks is empty.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "d7a9d443bc8a75a24873c0506f50051edfedc714",
      "tree": "6255771f6cca87698dcc8eb11d62e7fc217b8d0b",
      "parents": [
        "06f603851fa90bcd236328438278d4dc8b655495"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "message": "md: add \u0027write_error\u0027 flag to component devices.\n\nIf a device has ever seen a write error, we will want to handle\nknown-bad-blocks differently.\nSo create an appropriate state flag and export it via sysfs.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "06f603851fa90bcd236328438278d4dc8b655495",
      "tree": "49a7f239a9c2de4bf97d998f161b229a565e33cd",
      "parents": [
        "d2eb35acfdccbe2a3622ed6cc441a5482148423b"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "message": "md/raid1: avoid reading known bad blocks during resync\n\nWhen performing resync/etc, keep the size of the request\nsmall enough that it doesn\u0027t overlap any known bad blocks.\nDevices with badblocks at the start of the request are completely\nexcluded.\nIf there is nowhere to read from due to bad blocks, record\na bad block on each target device.\n\nNow that we never read from known-bad-blocks we can allow devices with\nknown-bad-blocks into a RAID1.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "d2eb35acfdccbe2a3622ed6cc441a5482148423b",
      "tree": "77600cab29fc9e1fd39d612773086a456fc32d88",
      "parents": [
        "9f2f3830789a4c9c1af2d1437d407c43e05136e6"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:48 2011 +1000"
      },
      "message": "md/raid1: avoid reading from known bad blocks.\n\nNow that we have a bad block list, we should not read from those\nblocks.\nThere are several main parts to this:\n  1/ read_balance needs to check for bad blocks, and return not only\n     the chosen device, but also how many good blocks are available\n     there.\n  2/ fix_read_error needs to avoid trying to read from bad blocks.\n  3/ read submission must be ready to issue multiple reads to\n     different devices as different bad blocks on different devices\n     could mean that a single large read cannot be served by any one\n     device, but can still be served by the array.\n     This requires keeping count of the number of outstanding requests\n     per bio.  This count is stored in \u0027bi_phys_segments\u0027\n  4/ retrying a read needs to also be ready to submit a smaller read\n     and queue another request for the rest.\n\nThis does not yet handle bad blocks when reading to perform resync,\nrecovery, or check.\n\n\u0027md_trim_bio\u0027 will also be used for RAID10, so put it in md.c and\nexport it.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "9f2f3830789a4c9c1af2d1437d407c43e05136e6",
      "tree": "8e20afbfca82acd7346fb93d35170f44ee01a807",
      "parents": [
        "2699b67223aca6b1450fc2f72e40fada952afc85"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "message": "md: Disable bad blocks and v0.90 metadata.\n\nv0.90 metadata cannot record bad blocks, so when loading metadata\nfor such a device, set shift to -1.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "2699b67223aca6b1450fc2f72e40fada952afc85",
      "tree": "c84d0cbb763ad03cd770a218a37f0f1ec31118af",
      "parents": [
        "34b343cff4354ab9864be83be88405fd53d928a0"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "message": "md: load/store badblock list from v1.x metadata\n\nSpace must have been allocated when array was created.\nA feature flag is set when the badblock list is non-empty, to\nensure old kernels don\u0027t load and trust the whole device.\n\nWe only update the on-disk badblocklist when it has changed.\nIf the badblocklist (or other metadata) is stored on a bad block, we\ndon\u0027t cope very well.\n\nIf metadata has no room for bad block, flag bad-blocks as disabled,\nand do the same for 0.90 metadata.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "34b343cff4354ab9864be83be88405fd53d928a0",
      "tree": "10d75ecac6091f955cbb8a60b79f443355ca4ea8",
      "parents": [
        "6e0d2d0312fb20c1edac1b2c849068c1c7944abf"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "message": "md: don\u0027t allow arrays to contain devices with bad blocks.\n\nAs no personality understand bad block lists yet, we must\nreject any device that is known to contain bad blocks.\nAs the personalities get taught, these tests can be removed.\n\nThis only applies to raid1/raid5/raid10.\nFor linear/raid0/multipath/faulty the whole concept of bad blocks\ndoesn\u0027t mean anything so there is no point adding the checks.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "16c791a5af3e50d0c11760485fd68e5829f3be4d",
      "tree": "24182e37b278a55a9b05b19154ff52597d220714",
      "parents": [
        "2230dfe4ccc3add340dc6d437965b2de1d269fde"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:47 2011 +1000"
      },
      "message": "md/bad-block-log: add sysfs interface for accessing bad-block-log.\n\nThis can show the log (providing it fits in one page) and\nallows bad blocks to be \u0027acknowledged\u0027 meaning that they\nhave safely been recorded in metadata.\n\nClearing bad blocks is not allowed via sysfs (except for\ncode testing).  A bad block can only be cleared when\na write to the block succeeds.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "2230dfe4ccc3add340dc6d437965b2de1d269fde",
      "tree": "fc45b727ad2e1a148e7d20f327b45a3afc474e9d",
      "parents": [
        "a519b26dbe6533416d21b552053b0bf687f878d7"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:46 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 11:31:46 2011 +1000"
      },
      "message": "md: beginnings of bad block management.\n\nThis the first step in allowing md to track bad-blocks per-device so\nthat we can fail individual blocks rather than the whole device.\n\nThis patch just adds a data structure for recording bad blocks, with\nroutines to add, remove, search the list.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "a519b26dbe6533416d21b552053b0bf687f878d7",
      "tree": "bef24eab8604ef2275eb8f1b591ea52bd4b89194",
      "parents": [
        "768e587e18c1c4ce0403b9532115752189422408"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 07:56:24 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Thu Jul 28 07:56:24 2011 +1000"
      },
      "message": "md: remove suspicious size_of()\n\nWhen calling bioset_create we pass the size of the front_pad as\n   sizeof(mddev)\nwhich looks suspicious as mddev is a pointer and so it looks like a\ncommon mistake where\n   sizeof(*mddev)\nwas intended.\nThe size is actually correct as we want to store a pointer in the\nfront padding of the bios created by the bioset, so make the intent\nmore explicit by using\n   sizeof(mddev_t *)\n\nReported-by: Zdenek Kabelac \u003czdenek.kabelac@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "91d41fdf31f74e6e2e5f3cb018eca4200e36e202",
      "tree": "81ef11f06bd8047031a2d93706dc263fa1bacd56",
      "parents": [
        "c1095c6da518b0b64e724f629051fa67655cd8d9",
        "277c5f27a2c86a9a733c0ec0f6a9b1032dfa3e15"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 13:21:40 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 13:21:40 2011 -0700"
      },
      "message": "Merge branch \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending\n\n* \u0027for-next\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:\n  target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors\n  kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage\n  iscsi-target: Add iSCSI fabric support for target v4.1\n  iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h\n  iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]\n  iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi\n"
    },
    {
      "commit": "70a3eff5768350c0313a9ae70a15da113171d0ab",
      "tree": "9c2558f92e567bcb35c79f59bc7ebc9cf6fdc9d3",
      "parents": [
        "9ed3689bdceb0064ee6faf0e76f6467122794970",
        "aa7eb8e78d8ecd6cd0475d86ea8385ff9cb47ece"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 09:24:56 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 09:24:56 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits)\n  Input: synaptics - fix reporting of min coordinates\n  Input: tegra-kbc - enable key autorepeat\n  Input: kxtj9 - fix locking typo in kxtj9_set_poll()\n  Input: kxtj9 - fix bug in probe()\n  Input: intel-mid-touch - remove pointless checking for variable \u0027found\u0027\n  Input: hp_sdc - staticize hp_sdc_kicker()\n  Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure\n  Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data\n  Input: cy8ctmg110_ts - constify i2c_device_id table\n  Input: cy8ctmg110_ts - fix checking return value of i2c_master_send\n  Input: lifebook - make dmi callback functions return 1\n  Input: atkbd - make dmi callback functions return 1\n  Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS\n  Input: gpio_keys - add support for device-tree platform data\n  Input: aiptek - remove double define\n  Input: synaptics - set minimum coordinates as reported by firmware\n  Input: synaptics - process button bits in AGM packets\n  Input: synaptics - rename set_slot to be more descriptive\n  Input: synaptics - fuzz position for touchpad with reduced filtering\n  Input: synaptics - set resolution for MT_POSITION_X/Y axes\n  ...\n"
    },
    {
      "commit": "8aae36cdf12313cd9cc0e4799fe1ea64d3c623f3",
      "tree": "40a225a7183d0fcbbc9762602673b0fd6232c0b0",
      "parents": [
        "e371d46ae45488bcb112a99a7de462e9e3aa6764"
      ],
      "author": {
        "name": "Daniel Morsing",
        "email": "daniel.morsing@gmail.com",
        "time": "Wed Jul 27 13:53:28 2011 +0200"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Wed Jul 27 09:23:35 2011 -0700"
      },
      "message": "staging: brcm80211: Fix double include introduced by bad merge\n\nA merge with Linus\u0027 tree added a double include of linux/interrupt.h.\nFix by removing one of the includes.\n\nSigned-off-by: Daniel Morsing \u003cdaniel.morsing@gmail.com\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "aa7eb8e78d8ecd6cd0475d86ea8385ff9cb47ece",
      "tree": "3f9e98fadd5124fb05e8f6f9b06aa23698d4f215",
      "parents": [
        "cca8edfd2ec2a34d9f50f593bc753bb11e1bc1f5",
        "3c6b50141ef9f0a8844bf1357b80c0cdf518bf05"
      ],
      "author": {
        "name": "Dmitry Torokhov",
        "email": "dmitry.torokhov@gmail.com",
        "time": "Wed Jul 27 00:54:47 2011 -0700"
      },
      "committer": {
        "name": "Dmitry Torokhov",
        "email": "dmitry.torokhov@gmail.com",
        "time": "Wed Jul 27 00:54:47 2011 -0700"
      },
      "message": "Merge branch \u0027next\u0027 into for-linus\n"
    },
    {
      "commit": "e371d46ae45488bcb112a99a7de462e9e3aa6764",
      "tree": "9e2eceb292018e52304053bd8013cdb0a7f31dcc",
      "parents": [
        "b0189cd087aa82bd23277cb5c8960ab030e13e5c",
        "e57712ebebbb9db7d8dcef216437b3171ddcf115"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 18:30:20 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 18:30:20 2011 -0700"
      },
      "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:\n  merge fchmod() and fchmodat() guts, kill ancient broken kludge\n  xfs: fix misspelled S_IS...()\n  xfs: get rid of open-coded S_ISREG(), etc.\n  vfs: document locking requirements for d_move, __d_move and d_materialise_unique\n  omfs: fix (mode \u0026 S_IFDIR) abuse\n  btrfs: S_ISREG(mode) is not mode \u0026 S_IFREG...\n  ima: fmode_t misspelled as mode_t...\n  pci-label.c: size_t misspelled as mode_t\n  jffs2: S_ISLNK(mode \u0026 S_IFMT) is pointless\n  snd_msnd -\u003emode is fmode_t, not mode_t\n  v9fs_iop_get_acl: get rid of unused variable\n  vfs: dont chain pipe/anon/socket on superblock s_inodes list\n  Documentation: Exporting: update description of d_splice_alias\n  fs: add missing unlock in default_llseek()\n"
    },
    {
      "commit": "768e587e18c1c4ce0403b9532115752189422408",
      "tree": "1b0d65fc839aa562c409a46984e1e15b1ae629d6",
      "parents": [
        "3520fa4db7fc4ae1b0373dcecdaf720f620dab2d"
      ],
      "author": {
        "name": "Jonathan Brassow",
        "email": "jbrassow@redhat.com",
        "time": "Wed Jul 27 11:00:37 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:37 2011 +1000"
      },
      "message": "MD: generate an event when array sync is complete\n\nThis patch causes MD to generate an event (for device-mapper) when the\nsynchronization thread is reaped.  This is expected behavior for device-mapper.\n\nSigned-off-by: Jonathan Brassow \u003cjbrassow@redhat.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "3520fa4db7fc4ae1b0373dcecdaf720f620dab2d",
      "tree": "62c675a29c65f89ec15f4a52203e5e0f731c2aa5",
      "parents": [
        "654e8b5abc0a793f0c029128db6e4804691a383e"
      ],
      "author": {
        "name": "Jonathan Brassow",
        "email": "jbrassow@redhat.com",
        "time": "Wed Jul 27 11:00:37 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:37 2011 +1000"
      },
      "message": "MD bitmap: Revert DM dirty log hooks\n\n\nRevert most of commit e384e58549a2e9a83071ad80280c1a9053cfd84c\n  md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log.\n\nMD should not need to use DM\u0027s dirty log - we decided to use md\u0027s\nbitmaps instead.\n\nKeeping the DIV_ROUND_UP clean-ups that were part of commit\ne384e58549a2e9a83071ad80280c1a9053cfd84c, however.\n\nSigned-off-by: Jonathan Brassow \u003cjbrassow@redhat.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "654e8b5abc0a793f0c029128db6e4804691a383e",
      "tree": "536950fcc8c418c8716ba152e439fe86d24f3365",
      "parents": [
        "8cfa7b0f67b4d899efc7f39eb7e172fd79237811"
      ],
      "author": {
        "name": "Jonathan Brassow",
        "email": "jbrassow@redhat.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "MD: raid1 s/sysfs_notify_dirent/sysfs_notify_dirent_safe\n\nIf device-mapper creates a RAID1 array that includes devices to\nbe rebuilt, it will deref a NULL pointer when finished because\nsysfs is not used by device-mapper instantiated RAID devices.\n\nSigned-off-by: Jonathan Brassow \u003cjbrassow@redhat.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "8cfa7b0f67b4d899efc7f39eb7e172fd79237811",
      "tree": "df1002e5eccbf4b241dc9e948bb894de2106d6e2",
      "parents": [
        "cbea21703b2484f83faef040ed1de30114794392"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: Avoid BUG caused by multiple failures.\n\nWhile preparing to write a stripe we keep the parity block or blocks\nlocked (R5_LOCKED) - towards the end of schedule_reconstruction.\n\nIf the array is discovered to have failed before this write completes\nwe can leave those blocks LOCKED, and init_stripe will notice that a\nfree stripe still has a locked block and will complain.\n\nSo clear the R5_LOCKED flag in handle_failed_stripe, and demote the\n\u0027BUG\u0027 to a \u0027WARN_ON\u0027.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "cbea21703b2484f83faef040ed1de30114794392",
      "tree": "a6b06a5341cb8ece8807b09d3f35f928671b8578",
      "parents": [
        "ddd5115fe5594f5aae3c7f0008a5327bb1d19397"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid10: move rdev-\u003ecorrected_errors counting\n\nRead errors are considered to corrected if write-back and re-read\ncycle is finished without further problems. Thus moving the rdev-\u003e\ncorrected_errors counting after the re-reading looks more reasonable\nIMHO.\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "ddd5115fe5594f5aae3c7f0008a5327bb1d19397",
      "tree": "a3bfeaea386bbecb4bc4cd56ff3139c5d9975981",
      "parents": [
        "9d3d80113df824a266c5db3fac357a036ebc0b62"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: move rdev-\u003ecorrected_errors counting\n\nRead errors are considered to corrected if write-back and re-read\ncycle is finished without further problems. Thus moving the rdev-\u003e\ncorrected_errors counting after the re-reading looks more reasonable\nIMHO.\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "9d3d80113df824a266c5db3fac357a036ebc0b62",
      "tree": "26607a8761b06cfc05e4259a6609a48d9dab3f26",
      "parents": [
        "65a06f06744d3deae61f3596566952a8da92199f"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid1: move rdev-\u003ecorrected_errors counting\n\nRead errors are considered to corrected if write-back and re-read\ncycle is finished without further problems. Thus moving the rdev-\u003e\ncorrected_errors counting after the re-reading looks more reasonable\nIMHO. Also included a couple of whitespace fixes on sync_page_io().\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "65a06f06744d3deae61f3596566952a8da92199f",
      "tree": "5befc4ef2e1965c55a112d436bd980ff6c0bef55",
      "parents": [
        "700c72138938cf428c74379806886c6b017d6295"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md: get rid of unnecessary casts on page_address()\n\npage_address() returns void pointer, so the casts can be removed.\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "700c72138938cf428c74379806886c6b017d6295",
      "tree": "93ca6eb628d36e841131aa62a85b45d16b3f45fa",
      "parents": [
        "2bb77736ae5dca0a189829fbb7379d43364a9dac"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid10: Improve decision on whether to fail a device with a read error.\n\nNormally we would fail a device with a READ error.  However if doing\nso causes the array to fail, it is better to leave the device\nin place and just return the read error to the caller.\n\nThe current test for decide if the array will fail is overly\nsimplistic.\nWe have a function \u0027enough\u0027 which can tell if the array is failed or\nnot, so use it to guide the decision.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "2bb77736ae5dca0a189829fbb7379d43364a9dac",
      "tree": "a15efb6810aaf67af679bd05edb5419ac9f19583",
      "parents": [
        "5389042ffa36976caa45a79af16081d759001fa7"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid10: Make use of new recovery_disabled handling\n\nWhen we get a read error during recovery, RAID10 previously\narranged for the recovering device to appear to fail so that\nthe recovery stops and doesn\u0027t restart.  This is misleading and wrong.\n\nInstead, make use of the new recovery_disabled handling and mark\nthe target device and having recovery disabled.\n\nAdd appropriate checks in add_disk and remove_disk so that devices\nare removed and not re-added when recovery is disabled.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "5389042ffa36976caa45a79af16081d759001fa7",
      "tree": "eb303de141a50f41ccac438e734b65dbfe25825e",
      "parents": [
        "a478a069b6adf186373a6648c54fc5f1d3c2f8eb"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md: change managed of recovery_disabled.\n\nIf we hit a read error while recovering a mirror, we want to abort the\nrecovery without necessarily failing the disk - as having a disk this\na read error is better than not having an array at all.\n\nCurrently this is managed with a per-array flag \"recovery_disabled\"\nand is only implemented for RAID1.  For RAID10 we will need finer\ngrained control as we might want to disable recovery for individual\ndevices separately.\n\nSo push more of the decision making into the personality.\n\u0027recovery_disabled\u0027 is now a \u0027cookie\u0027 which is copied when the\npersonality want to disable recovery and is changed when a device is\nadded to the array as this is used as a trigger to \u0027try recovery\nagain\u0027.\n\nThis will allow RAID10 to get the control that it needs.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "a478a069b6adf186373a6648c54fc5f1d3c2f8eb",
      "tree": "ac10604e2b0e3525c25c6fb23128ab1fc858a550",
      "parents": [
        "36fad858a7404a9656122a9e560a224ae2a00979"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md: remove ro check in md_check_recovery()\n\nCommit c89a8eee6154 (\"Allow faulty devices to be removed from a\nreadonly array.\") added some work on ro array in the function,\nbut it couldn\u0027t be done since we didn\u0027t allow the ro array to be\nhandled from the beginning. Fix it.\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "36fad858a7404a9656122a9e560a224ae2a00979",
      "tree": "95f8a7a6b8dad6bb8d7c7735f7845888b5e702db",
      "parents": [
        "8bda470e8ebde35f9349e98ecbce4dfb508a60fa"
      ],
      "author": {
        "name": "Namhyung Kim",
        "email": "namhyung@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md: introduce link/unlink_rdev() helpers\n\nThere are places where sysfs links to rdev are handled\nin a same way. Add the helper functions to consolidate\nthem.\n\nSigned-off-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "8bda470e8ebde35f9349e98ecbce4dfb508a60fa",
      "tree": "105aa6781eef93c5a2f996c53dfa25fbce818dfe",
      "parents": [
        "a0a02a7ad62b5615b17294c2075e4916f8d1f0a4"
      ],
      "author": {
        "name": "Christian Dietrich",
        "email": "christian.dietrich@informatik.uni-erlangen.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid: use printk_ratelimited instead of printk_ratelimit\n\nAs per printk_ratelimit comment, it should not be used.\n\nSigned-off-by: Christian Dietrich \u003cchristian.dietrich@informatik.uni-erlangen.de\u003e\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "a0a02a7ad62b5615b17294c2075e4916f8d1f0a4",
      "tree": "e3f9f7582a869915d3ac8242253c822b61e77e4b",
      "parents": [
        "acfe726bdd0000a9be1b308b29fad1e9ae62178c"
      ],
      "author": {
        "name": "Akinobu Mita",
        "email": "akinobu.mita@gmail.com",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md: use proper little-endian bitops\n\nUsing __test_and_{set,clear}_bit_le() with ignoring its return value\ncan be replaced with __{set,clear}_bit_le().\n\nSigned-off-by: Akinobu Mita \u003cakinobu.mita@gmail.com\u003e\nCc: NeilBrown \u003cneilb@suse.de\u003e\nCc: linux-raid@vger.kernel.org\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\n"
    },
    {
      "commit": "acfe726bdd0000a9be1b308b29fad1e9ae62178c",
      "tree": "468713f2be848747723b89fe5afbf39cdfc375ef",
      "parents": [
        "474af965fe0005b334cabdb2904a7d712c21489b"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: finalise new merged handle_stripe.\n\nhandle_stripe5() and handle_stripe6() are now virtually identical.\nSo discard one and rename the other to \u0027analyse_stripe()\u0027.\n\nIt always returns 0, so change it to \u0027void\u0027 and remove the \u0027done\u0027\nvariable in handle_stripe().\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "474af965fe0005b334cabdb2904a7d712c21489b",
      "tree": "1d63b4bbe47e2976dd10e7fa4674299b58efc45a",
      "parents": [
        "84789554e96c0263ad8aa9be91397ece1f88c768"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: move some more common code into handle_stripe\n\nThe RAID6 version of this code is usable for RAID5 providing:\n  - we test \"conf-\u003emax_degraded\" rather than \"2\" as appropriate\n  - we make sure s-\u003efailed_num[1] is meaningful (and not \u0027-1\u0027)\n    when s-\u003efailed \u003e 1\n\nThe \u0027return 1\u0027 must become \u0027goto finish\u0027 in the new location.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "84789554e96c0263ad8aa9be91397ece1f88c768",
      "tree": "678ee7d5ba7a1473d4fd532a80e878b228c2066b",
      "parents": [
        "c8ac1803ff0af5aa614587ac0c66d46b7a3bdfcc"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: move more common code into handle_stripe\n\nApart from \u0027prexor\u0027 which can only be set for RAID5, and\n\u0027qd_idx\u0027 which can only be meaningful for RAID6, these two\nchunks of code are nearly the same.\n\nSo combine them into one adding a test to call either\nhandle_parity_checks5 or handle_parity_checks6 as appropriate.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "c8ac1803ff0af5aa614587ac0c66d46b7a3bdfcc",
      "tree": "e1ac80fb2151802d8a2654b5c91e06c77c0f3686",
      "parents": [
        "93b3dbce6456a79c545b45e86ccc2244e923cc99"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: unite handle_stripe_dirtying5 and handle_stripe_dirtying6\n\nRAID6 is only allowed to choose \u0027reconstruct-write\u0027 while RAID5 is\nalso allow \u0027read-modify-write\u0027\nApart from this difference, handle_stripe_dirtying[56] are nearly\nidentical.  So resolve these differences and create just one function.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "93b3dbce6456a79c545b45e86ccc2244e923cc99",
      "tree": "6f129f4bc8d309ed681e21bcb98009834becc898",
      "parents": [
        "5d35e09cae47bbae2739f432658860680de21866"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: unite fetch_block5 and fetch_block6\n\nProvided that -\u003efailed_num[1] is not a valid device number (which is\neasily achieved) fetch_block6 provides all the functionality of\nfetch_block5.\n\nSo remove the latter and rename the former to simply \"fetch_block\".\n\nThen handle_stripe_fill5 and handle_stripe_fill6 become the same and\ncan similarly be united.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "5d35e09cae47bbae2739f432658860680de21866",
      "tree": "619a548f43403883f394062f3397de2ca6eb6c4a",
      "parents": [
        "c5a3100062cf277d3edd4e6f4a1f1e403524b464"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: rearrange a test in fetch_block6.\n\nNext patch will unite fetch_block5 and fetch_block6.\nFirst I want to make the differences a little more clear.\n\nFor RAID6 if we are writing at all and there is a failed device, then\nwe need to load or compute every block so we can do a\nreconstruct-write.\nThis case isn\u0027t needed for RAID5 - we will do a read-modify-write in\nthat case.\nSo make that test a separate test in fetch_block6 rather than merged\nwith two other tests.\n\nMake a similar change in fetch_block5 so the one bit that is not\nneeded for RAID6 is clearly separate.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "c5a3100062cf277d3edd4e6f4a1f1e403524b464",
      "tree": "ccc8f2ae6491497cd8ad172a3bbc0165f86edcdf",
      "parents": [
        "3687c061886dd0bfec07e131ad12f916ef0abc62"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: move more code into common handle_stripe\n\nThe difference between the RAID5 and RAID6 code here is easily\nresolved using conf-\u003emax_degraded.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "3687c061886dd0bfec07e131ad12f916ef0abc62",
      "tree": "c8f65f4895db3f9c1554f766a430829d40fe7c19",
      "parents": [
        "86c374ba9f6726a79a032ede741dc66d219b166e"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: Move code for finishing a reconstruction into handle_stripe.\n\nPrior to commit ab69ae12ceef7 the code in handle_stripe5 and\nhandle_stripe6 to \"Finish reconstruct operations initiated by the\nexpansion process\" was identical.\nThat commit added an identical stanza of code to each function, but in\ndifferent places.  That was careless.\n\nThe raid5 code was correct, so move that out into handle_stripe and\nremove raid6 version.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "86c374ba9f6726a79a032ede741dc66d219b166e",
      "tree": "58bf8de967c300828e3176459455a86d68e27971",
      "parents": [
        "cc94015a9eac5d511fe9b716624d8fdf9c6e64b2"
      ],
      "author": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "committer": {
        "name": "NeilBrown",
        "email": "neilb@suse.de",
        "time": "Wed Jul 27 11:00:36 2011 +1000"
      },
      "message": "md/raid5: Remove stripe_head_state arg from handle_stripe_expansion.\n\nThis arg is only used to differentiate between RAID5 and RAID6 but\nthat is not needed.  For RAID5, raid5_compute_sector will set qd_idx\nto \"~0\" so j with certainly not equals qd_idx, so there is no need\nfor a guard on that condition.\n\nSo remove the guard and remove the arg from the declaration and\ncallers of handle_stripe_expansion.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nReviewed-by: Namhyung Kim \u003cnamhyung@gmail.com\u003e\n"
    },
    {
      "commit": "b0189cd087aa82bd23277cb5c8960ab030e13e5c",
      "tree": "7b1a4c152cd62ce136fd5b0e4379d58eb2244e66",
      "parents": [
        "69f1d1a6acbaa7d83ef3f4ee26209c58cd000204",
        "bc574e190d3fbed37d724e33a16aee326d6f2ac4"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:42:18 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:42:18 2011 -0700"
      },
      "message": "Merge branch \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027next/devel2\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (47 commits)\n  OMAP: Add debugfs node to show the summary of all clocks\n  OMAP2+: hwmod: Follow the recommended PRCM module enable sequence\n  OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code\n  OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming\n  OMAP2+: PM: idle clkdms only if already in idle\n  OMAP2+: clockdomain: add clkdm_in_hwsup()\n  OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework\n  OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()\n  OMAP4: hwmod: Introduce the module control in hwmod control\n  OMAP4: cm: Add two new APIs for modulemode control\n  OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure\n  OMAP4: hwmod data: Add PRM context register offset\n  OMAP4: prm: Remove deprecated functions\n  OMAP4: prm: Replace warm reset API with the offset based version\n  OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros\n  OMAP: hwmod: Wait the idle status to be disabled\n  OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros\n  OMAP2+: hwmod: Init clkdm field at boot time\n  OMAP4: hwmod data: Add clock domain attribute\n  OMAP4: clock data: Add missing divider selection for auxclks\n  ...\n"
    },
    {
      "commit": "69f1d1a6acbaa7d83ef3f4ee26209c58cd000204",
      "tree": "12be981f8a123b8361edd64b84fd72f339a9655d",
      "parents": [
        "2d86a3f04e345b03d5e429bfe14985ce26bff4dc",
        "1e09939bad24df95ddeeeca4fbec64fa94b66def"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:41:04 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:41:04 2011 -0700"
      },
      "message": "Merge branch \u0027next/devel\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027next/devel\u0027 of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)\n  ARM: S5P64X0: External Interrupt Support\n  ARM: EXYNOS4: Enable MFC on Samsung NURI\n  ARM: EXYNOS4: Enable MFC on universal_c210\n  ARM: S5PV210: Enable MFC on Goni\n  ARM: S5P: Add support for MFC device\n  ARM: EXYNOS4: Add support FIMD on SMDKC210\n  ARM: EXYNOS4: Add platform device and helper functions for FIMD\n  ARM: EXYNOS4: Add resource definition for FIMD\n  ARM: EXYNOS4: Change devname for FIMD clkdev\n  ARM: SAMSUNG: Add IRQ_I2S0 definition\n  ARM: SAMSUNG: Add platform device for idma\n  ARM: EXYNOS4: Add more registers to be saved and restored for PM\n  ARM: EXYNOS4: Add more register addresses of CMU\n  ARM: EXYNOS4: Add platform device for dwmci driver\n  ARM: EXYNOS4: configure rtc-s3c on NURI\n  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI\n  ARM: EXYNOS4: configure ADC on NURI\n  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI\n  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI\n  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs\n  ...\n\nFix up tons of silly conflicts:\n - arch/arm/mach-davinci/include/mach/psc.h\n - arch/arm/mach-exynos4/Kconfig\n - arch/arm/mach-exynos4/mach-smdkc210.c\n - arch/arm/mach-exynos4/pm.c\n - arch/arm/mach-imx/mm-imx1.c\n - arch/arm/mach-imx/mm-imx21.c\n - arch/arm/mach-imx/mm-imx25.c\n - arch/arm/mach-imx/mm-imx27.c\n - arch/arm/mach-imx/mm-imx31.c\n - arch/arm/mach-imx/mm-imx35.c\n - arch/arm/mach-mx5/mm.c\n - arch/arm/mach-s5pv210/mach-goni.c\n - arch/arm/mm/Kconfig\n"
    },
    {
      "commit": "3960ef326a1838971466193ffa008ff37c1d978d",
      "tree": "282b74377bccb9fa79639ce4df2dcb48652dbdec",
      "parents": [
        "62c9072bee2272232d0ed92dc8148c48c1f10f8e",
        "c8f85523e70f8202ff49858bacd72fa65245f382"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:12:10 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 17:12:10 2011 -0700"
      },
      "message": "Merge branch \u0027next/cross-platform\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc\n\n* \u0027next/cross-platform\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:\n  ARM: Consolidate the clkdev header files\n  ARM: set vga memory base at run-time\n  ARM: convert PCI defines to variables\n  ARM: pci: make pcibios_assign_all_busses use pci_has_flag\n  ARM: remove unnecessary mach/hardware.h includes\n  pci: move microblaze and powerpc pci flag functions into asm-generic\n  powerpc: rename ppc_pci_*_flags to pci_*_flags\n\nFix up conflicts in arch/microblaze/include/asm/pci-bridge.h\n"
    },
    {
      "commit": "38da590bef19f23d4b610aecaad4f32de483890d",
      "tree": "4a1dbd0f6e1d171d5d366677e70b76f2e0d437e5",
      "parents": [
        "7505cb60c2d26301630b052852d484decf07aef1",
        "07e729ce894487e92405d3b221cffe587420a376"
      ],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:55:45 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:55:45 2011 -0700"
      },
      "message": "Merge branch \u0027next-i2c\u0027 of git://git.fluff.org/bjdooks/linux\n\n* \u0027next-i2c\u0027 of git://git.fluff.org/bjdooks/linux:\n  i2c-eg20t : Fix the issue of Combined R/W transfer mode\n  i2c-eg20t : Support Combined R/W transfer mode\n  i2c: Tegra: Add DeviceTree support\n"
    },
    {
      "commit": "60063497a95e716c9a689af3be2687d261f115b4",
      "tree": "6ce0d68db76982c53df46aee5f29f944ebf2c320",
      "parents": [
        "148817ba092f9f6edd35bad3c6c6b8e8f90fe2ed"
      ],
      "author": {
        "name": "Arun Sharma",
        "email": "asharma@fb.com",
        "time": "Tue Jul 26 16:09:06 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:47 2011 -0700"
      },
      "message": "atomic: use \u003clinux/atomic.h\u003e\n\nThis allows us to move duplicated code in \u003casm/atomic.h\u003e\n(atomic_inc_not_zero() for now) to \u003clinux/atomic.h\u003e\n\nSigned-off-by: Arun Sharma \u003casharma@fb.com\u003e\nReviewed-by: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nCc: Ingo Molnar \u003cmingo@elte.hu\u003e\nCc: David Miller \u003cdavem@davemloft.net\u003e\nCc: Eric Dumazet \u003ceric.dumazet@gmail.com\u003e\nAcked-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "3e5c4fadb9943c7539364d0c8425db071a2020e4",
      "tree": "34f1d5c4cbf2f330e9fd1210da6dabde3befa6bf",
      "parents": [
        "6b4d2a2733b9a17112f746d498c9f9a0427dcdd8"
      ],
      "author": {
        "name": "Sergiu Iordache",
        "email": "sergiu@chromium.org",
        "time": "Tue Jul 26 16:08:59 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:46 2011 -0700"
      },
      "message": "ramoops: make record_size a module parameter\n\nThe size of the dump is currently set using the RECORD_SIZE macro which\nis set to a page size.  This patch makes the record size a module\nparameter and allows it to be set through platform data as well to allow\nlarger dumps if needed.\n\nSigned-off-by: Sergiu Iordache \u003csergiu@chromium.org\u003e\nAcked-by: Marco Stornelli \u003cmarco.stornelli@gmail.com\u003e\nCc: \"Ahmed S. Darwish\" \u003cdarwish.07@gmail.com\u003e\nCc: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "6b4d2a2733b9a17112f746d498c9f9a0427dcdd8",
      "tree": "c0c637da5ede8828728bad87fba41e7ca7f11ca1",
      "parents": [
        "0169256e4bbf29e507cdd1df5812c093d610f1d5"
      ],
      "author": {
        "name": "Sergiu Iordache",
        "email": "sergiu@chromium.org",
        "time": "Tue Jul 26 16:08:58 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:45 2011 -0700"
      },
      "message": "ramoops: move dump_oops into platform data\n\nThe platform driver currently allows setting the mem_size and\nmem_address.\n\nince dump_oops is also a module parameter it would be more consistent if\nit could be set through platform data as well.\n\nSigned-off-by: Sergiu Iordache \u003csergiu@chromium.org\u003e\nAcked-by: Marco Stornelli \u003cmarco.stornelli@gmail.com\u003e\nCc: \"Ahmed S. Darwish\" \u003cdarwish.07@gmail.com\u003e\nCc: Artem Bityutskiy \u003cArtem.Bityutskiy@nokia.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "0169256e4bbf29e507cdd1df5812c093d610f1d5",
      "tree": "9eb6a08580341cc4d8499217f89063577e604d3d",
      "parents": [
        "13aefd7293e7a697bbf452fca65e69cc1fa8a31c"
      ],
      "author": {
        "name": "Marco Stornelli",
        "email": "marco.stornelli@gmail.com",
        "time": "Tue Jul 26 16:08:57 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:45 2011 -0700"
      },
      "message": "ramoops: add new line to each print\n\nAdd new line to each print.\n\nSigned-off-by: Marco Stornelli \u003cmarco.stornelli@gmail.com\u003e\nReported-by: Stevie Trujillo \u003cstevie.trujillo@gmail.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nCc: Américo Wang \u003cxiyou.wangcong@gmail.com\u003e\nCc: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "13aefd7293e7a697bbf452fca65e69cc1fa8a31c",
      "tree": "2d8c2039904eda4b9079cae83145c541e8dc8c01",
      "parents": [
        "beda94da38d2a3bf7f40c01f0a8e6d86067c91cc"
      ],
      "author": {
        "name": "Marco Stornelli",
        "email": "marco.stornelli@gmail.com",
        "time": "Tue Jul 26 16:08:57 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:45 2011 -0700"
      },
      "message": "ramoops: use module parameters instead of platform data if not available\n\nUse generic module parameters instead of platform data, if platform data\nare not available.  This limitation has been introduced with commit\nc3b92ce9e75 (\"ramoops: use the platform data structure instead of module\nparams\").\n\n[akpm@linux-foundation.org: coding-style fixes]\nSigned-off-by: Marco Stornelli \u003cmarco.stornelli@gmail.com\u003e\nCc: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nCc: Américo Wang \u003cxiyou.wangcong@gmail.com\u003e\nReported-by: Stevie Trujillo \u003cstevie.trujillo@gmail.com\u003e\nCc: Joe Perches \u003cjoe@perches.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    },
    {
      "commit": "beda94da38d2a3bf7f40c01f0a8e6d86067c91cc",
      "tree": "8ba71064abc8d9ee10370ac40d66a1189dba1423",
      "parents": [
        "f7b1371eb6b3ff72e38de220663b22f7cc9df296"
      ],
      "author": {
        "name": "Dmitry Torokhov",
        "email": "dtor@vmware.com",
        "time": "Tue Jul 26 16:08:56 2011 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@linux-foundation.org",
        "time": "Tue Jul 26 16:49:45 2011 -0700"
      },
      "message": "Vmware balloon: switch to using sysem-wide freezable workqueue\n\nWith the arrival of concurrency-managed workqueues there is no need for\nour driver to use dedicated workqueue; system-wide one should suffice just\nfine.\n\n[akpm@linux-foundation.org: fix comment layout \u0026 grammar]\nSigned-off-by: Dmitry Torokhov \u003cdtor@vmware.com\u003e\nAcked-by: Tejun Heo \u003ctj@kernel.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n"
    }
  ],
  "next": "f7b1371eb6b3ff72e38de220663b22f7cc9df296"
}