)]}'
{
  "log": [
    {
      "commit": "e9e9290f5c85887baf1123a36ec9fdf56a10cf4b",
      "tree": "ac52a0348e7b27288b174fa9872cc97decc53f68",
      "parents": [
        "8e4f7230a3bd015862f3af58dc563dbc1cdebfe2"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Jul 18 18:32:33 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 24 12:44:34 2006 -0700"
      },
      "message": "[Bluetooth] Enable SCO support for Broadcom HID proxy dongle\n\nThe Broadcom dongles with HID proxy support actually support SCO over\nHCI if the SCO buffer size values are corrected. So instead of disabling\nthe SCO support, mark this dongle with the quirk for the Bluetooth core\nto correct the wrong buffer size values.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "8e4f7230a3bd015862f3af58dc563dbc1cdebfe2",
      "tree": "ef99fcb25a8cc3437b8a1d8607cce0c6d7567942",
      "parents": [
        "ea9727f6e55dabc7a58cf56c87e65665e239e171"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Jul 18 18:04:59 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 24 12:44:32 2006 -0700"
      },
      "message": "[Bluetooth] Add quirk for another broken RTX Telecom based dongle\n\nThis patch disables the ISOC transfers for another broken RTX Telecom\nbased USB dongle. Starting the USB ISOC transfers only ends in a burst\nof error messages for invalid SCO packets on connection handle 0.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "ea9727f6e55dabc7a58cf56c87e65665e239e171",
      "tree": "dbc4c262338b536489cbae718b5e33b8e9f3734f",
      "parents": [
        "520ca78acc652c89c92e8bf29536319afa9d88bb"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Jul 18 17:47:40 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 24 12:44:30 2006 -0700"
      },
      "message": "[Bluetooth] Correct SCO buffer size for Belkin devices\n\nThe Belkin F8T012 and F8T013 devices are both based on a Bluetooth chip\nfrom Broadcom and their SCO buffer size values are wrong. The Bluetooth\ncore should correct these values.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "520ca78acc652c89c92e8bf29536319afa9d88bb",
      "tree": "ff24340b2e5dca27c09b2d80b7510c3ead4d0d77",
      "parents": [
        "98bcd08b5bfe78c1c9bda5768aa081e0fe4fcc4f"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Jul 14 16:01:52 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 24 12:44:27 2006 -0700"
      },
      "message": "[Bluetooth] Correct SCO buffer size for another Broadcom chip\n\nThe SCO buffer size values on IBM/Lenovo ThinkPad laptops with a\nBluetooth chip from Broadcom are wrong. The USB Bluetooth driver\nhas to set a quirk to correct the SCO buffer size values.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "420cc3505f91246699bcfb88d30c4466adc0b87b",
      "tree": "e4732e344576a094766df06640d9ec3aa80a98ab",
      "parents": [
        "25ea6db04a96d7871e7ece27d566f3228d59d932"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Thu Jul 06 15:53:31 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Wed Jul 12 15:34:30 2006 -0700"
      },
      "message": "[Bluetooth] Avoid NULL pointer dereference with tty-\u003edriver\n\nThis patch checks for tty-\u003edriver before trying to call flush_buffer().\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "73ca66b97b73257a7d832d502c36fc19fe847809",
      "tree": "d39f50b1931d67c51e56f891b785be1143599177",
      "parents": [
        "454d6fbc48374be8f53b9bafaa86530cf8eb3bc1"
      ],
      "author": {
        "name": "Magnus Damm",
        "email": "magnus@valinux.co.jp",
        "time": "Mon Jul 10 04:44:09 2006 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Jul 10 13:24:15 2006 -0700"
      },
      "message": "[PATCH] release_firmware() fixes\n\nUse release_firmware() to free requested resources.\n\nAccording to Documentation/firmware_class/README the request_firmware()\ncall should be followed by a release_firmware().  Some drivers do not\nhowever free the firmware previously allocated with request_firmware().\nThis patch tries to fix this by making sure that release_firmware() is used\nas expected.\n\nSigned-off-by: Magnus Damm \u003cmagnus@valinux.co.jp\u003e\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nCc: Mauro Carvalho Chehab \u003cmchehab@infradead.org\u003e\nCc: \"John W. Linville\" \u003clinville@tuxdriver.com\u003e\nCc: Greg KH \u003cgreg@kroah.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "27d35284258c596900e0e41c46932ec4abe6a7b1",
      "tree": "d1a0f236b589e14f3c6251e9dfcb2b2aafdaf5ad",
      "parents": [
        "04837f6447c7f3ef114cda1ad761822dedbff8cf"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Jul 03 10:02:37 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 03 19:54:00 2006 -0700"
      },
      "message": "[Bluetooth] Add platform device for virtual and serial devices\n\nThis patch adds a generic Bluetooth platform device that can be used\nas parent device by virtual and serial devices.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "da1f519851d1c66331363253f364bdb5d924ea96",
      "tree": "8760b2edb53a50d679403385dc2cbf960bb3cffc",
      "parents": [
        "dcdcf63ef12dc3fbaa17a6d04f16ada8e63bb4d0"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Jul 03 10:02:29 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 03 19:53:56 2006 -0700"
      },
      "message": "[Bluetooth] Correct SCO buffer size on request\n\nThis patch introduces a quirk that allows the drivers to tell the host\nto correct the SCO buffer size values.\n\nSigned-off-by: Olivier Galibert \u003cgalibert@pobox.com\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "dcdcf63ef12dc3fbaa17a6d04f16ada8e63bb4d0",
      "tree": "ebcd16f8c4221305782fd1643eef018b546df36e",
      "parents": [
        "2b86ad21deec4c47a1f0089298f12e4038c2aa68"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Jul 03 10:02:24 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 03 19:53:52 2006 -0700"
      },
      "message": "[Bluetooth] Add suspend/resume support to the HCI USB driver\n\nThis patch implements the suspend/resume methods for the HCI USB\ndriver by killing all outstanding URBs on suspend, and re-issuing\nthem on resume.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "2b86ad21deec4c47a1f0089298f12e4038c2aa68",
      "tree": "b6224bbad23a5acc57ba10d2b52093d0a51e3a80",
      "parents": [
        "69ee20a58fa0cad6520c2a9538100a87ef0abd7d"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Jul 03 10:02:18 2006 +0200"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Jul 03 19:53:50 2006 -0700"
      },
      "message": "[Bluetooth] Use raw mode for the Frontline sniffer device\n\nThe Frontline sniffer device looks like a normal H:2 Bluetooth device,\nbut it is not and so mark it as raw mode device.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "6ab3d5624e172c553004ecc862bfeac16d9d68b7",
      "tree": "6d98881fe91fd9583c109208d5c27131b93fa248",
      "parents": [
        "e02169b682bc448ccdc819dc8639ed34a23cedd8"
      ],
      "author": {
        "name": "Jörn Engel",
        "email": "joern@wohnheim.fh-wedel.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "committer": {
        "name": "Adrian Bunk",
        "email": "bunk@stusta.de",
        "time": "Fri Jun 30 19:25:36 2006 +0200"
      },
      "message": "Remove obsolete #include \u003clinux/config.h\u003e\n\nSigned-off-by: Jörn Engel \u003cjoern@wohnheim.fh-wedel.de\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\n"
    },
    {
      "commit": "57136ca6d57359c7f21a9bbb4a5a0a61eeb53f2b",
      "tree": "79c31abe40196cc1c350734a15d146d43fa3692c",
      "parents": [
        "81615b624a45621b758380ec45d750483eae281d"
      ],
      "author": {
        "name": "Jesper Juhl",
        "email": "jesper.juhl@gmail.com",
        "time": "Mon Jun 26 00:24:33 2006 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Jun 26 09:58:16 2006 -0700"
      },
      "message": "[PATCH] Bluetooth: fix potential NULL ptr deref in dtl1_cs.c::dtl1_hci_send_frame()\n\nThere\u0027s a problem in drivers/bluetooth/dtl1_cs.c::dtl1_hci_send_frame()\n\nIf bt_skb_alloc() returns NULL, then skb_reserve(s, NSHL); will cause a\nNULL pointer deref - ouch.  If we can\u0027t allocate the resources we require\nwe need to tell the caller by returning -ENOMEM.\n\nFound by the coverity checker as bug #409\n\nSigned-off-by: Jesper Juhl \u003cjesper.juhl@gmail.com\u003e\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "e2d4096365e06b9a3799afbadc28b4519c0b3526",
      "tree": "90ec691d71f9c0309048714e359b8ba351b533f7",
      "parents": [
        "f6fbe01ac976f3ec618cd5fb71ad9ce2cfa7ab2b"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Thu Mar 02 00:09:29 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:26:33 2006 +0200"
      },
      "message": "[PATCH] pcmcia: use bitfield instead of p_state and state\n\nInstead of the two status values struct pcmcia_device-\u003ep_state and state,\nuse descriptive bitfields. Most value-checking in drivers was invalid, as\nthe core now only calls the -\u003eremove() (a.k.a. detach) function in case the\nattachement _and_ configuration was successful.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "15b99ac1729503db9e6dc642a50b9b6cb3bf51f9",
      "tree": "cfb8897487beba502aac2b28bc35066a87e34299",
      "parents": [
        "fba395eee7d3f342ca739c20f5b3ee635d0420a0"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:26:06 2006 +0200"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:26:06 2006 +0200"
      },
      "message": "[PATCH] pcmcia: add return value to _config() functions\n\nMost of the driver initialization isn\u0027t done in the .probe function, but in\nthe internal _config() functions. Make them return a value, so that .probe\ncan properly report whether the probing of the device succeeded or not.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n"
    },
    {
      "commit": "fba395eee7d3f342ca739c20f5b3ee635d0420a0",
      "tree": "5a73f68d3514aa795b0d8c500e4d72170651d762",
      "parents": [
        "fd238232cd0ff4840ae6946bb338502154096d88"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:21:06 2006 +0200"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:21:06 2006 +0200"
      },
      "message": "[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection\n\ndev_link_t * and client_handle_t both mean struct pcmcai_device * by now.\nTherefore, remove all such indirections.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n"
    },
    {
      "commit": "fd238232cd0ff4840ae6946bb338502154096d88",
      "tree": "d20e8f5871f7cff9d0867a84f6ba088fbffcbe28",
      "parents": [
        "a78f4dd331a4f6a396eb5849656a4a72a70a56d7"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Sun Mar 05 10:45:09 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:15:57 2006 +0200"
      },
      "message": "[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device\n\nEmbed dev_link_t into struct pcmcia_device(), as they basically address the\nsame entity. The actual contents of dev_link_t will be cleaned up step by step.\nThis patch includes a bugfix from and signed-off-by Andrew Morton.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "70294b468302fd7a0a99dad935c7ba5322989345",
      "tree": "e54b0b7c85517ef717f3755e06ca08fbb0f5937e",
      "parents": [
        "4bbed5231468014b500b048d7370a1c6c349231a"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Sun Jan 15 12:43:16 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:15:55 2006 +0200"
      },
      "message": "[PATCH] pcmcia: remove unneeded Vcc pseudo setting\n\nAs we do not allow setting Vcc in the pcmcia core, and Vpp1 and\nVpp2 can only be set to the same value, a lot of code can be\nstreamlined.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "8661bb5b4af1849c1f5a4e80c4e275fd13c155d6",
      "tree": "ad99d85ea8d6f5c4c99b93f869bfd412994fb4ee",
      "parents": [
        "50db3fdbbc98260fb538c1cc3f8cc597ba7bffe7"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Thu Mar 02 00:02:33 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:15:52 2006 +0200"
      },
      "message": "[PATCH] pcmcia: default suspend and resume handling\n\nIn all but one case, the suspend and resume functions of PCMCIA drivers\ncontain mostly of calls to pcmcia_release_configuration() and\npcmcia_request_configuration(). Therefore, move this code out of the\ndrivers and into the core.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "5f2a71fcb7995633b335a1e380ac63a968e61320",
      "tree": "d47f4227d314fc9f298b75c217fa78440004e6e7",
      "parents": [
        "1de9cedfbdff1d8adb662cd3afc5bda66e393351"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Sun Jan 15 09:32:39 2006 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Mar 31 17:15:50 2006 +0200"
      },
      "message": "[PATCH] pcmcia: add pcmcia_disable_device\n\npcmcia_disable_device(struct pcmcia_device *p_dev) performs the necessary\ncleanups upon device or driver removal: it calls the appropriate\npcmcia_release_* functions, and can replace (most) of the current drivers\u0027\n_release() functions.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "9225806386e398eeba46958a7befa017bda73f58",
      "tree": "425bb3d66554d10f45138795335545615cace048",
      "parents": [
        "7b005bd34c895ebeefd1c62f90a329730b88946b"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Feb 13 11:40:07 2006 +0100"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Mon Feb 13 11:40:07 2006 +0100"
      },
      "message": "[Bluetooth] Fix firmware loading problem of BT3C driver\n\nBefore the PCMCIA subsystem was fully integrated into the device and\ndriver model, the BT3C driver had to workaround this when loading the\nfirmware. This workaround is broken and makes the driver oops when\nloading the firmware. This patch removes this workaround and uses now\nthe provided device structure from the PCMCIA subsystem.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "858119e159384308a5dde67776691a2ebf70df0f",
      "tree": "f360768f999d51edc0863917ce0bf79e88c0ec4c",
      "parents": [
        "b0a9499c3dd50d333e2aedb7e894873c58da3785"
      ],
      "author": {
        "name": "Arjan van de Ven",
        "email": "arjan@infradead.org",
        "time": "Sat Jan 14 13:20:43 2006 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sat Jan 14 18:27:06 2006 -0800"
      },
      "message": "[PATCH] Unlinline a bunch of other functions\n\nRemove the \"inline\" keyword from a bunch of big functions in the kernel with\nthe goal of shrinking it by 30kb to 40kb\n\nSigned-off-by: Arjan van de Ven \u003carjan@infradead.org\u003e\nSigned-off-by: Ingo Molnar \u003cmingo@elte.hu\u003e\nAcked-by: Jeff Garzik \u003cjgarzik@pobox.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "33f0f88f1c51ae5c2d593d26960c760ea154c2e2",
      "tree": "f53a38cf49406863f079d74d0e8f91b276f7c1a9",
      "parents": [
        "6ed80991a2dce4afc113be35089c564d62fa1f11"
      ],
      "author": {
        "name": "Alan Cox",
        "email": "alan@lxorguk.ukuu.org.uk",
        "time": "Mon Jan 09 20:54:13 2006 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Tue Jan 10 08:01:59 2006 -0800"
      },
      "message": "[PATCH] TTY layer buffering revamp\n\nThe API and code have been through various bits of initial review by\nserial driver people but they definitely need to live somewhere for a\nwhile so the unconverted drivers can get knocked into shape, existing\ndrivers that have been updated can be better tuned and bugs whacked out.\n\nThis replaces the tty flip buffers with kmalloc objects in rings. In the\nnormal situation for an IRQ driven serial port at typical speeds the\nbehaviour is pretty much the same, two buffers end up allocated and the\nkernel cycles between them as before.\n\nWhen there are delays or at high speed we now behave far better as the\nbuffer pool can grow a bit rather than lose characters. This also means\nthat we can operate at higher speeds reliably.\n\nFor drivers that receive characters in blocks (DMA based, USB and\nespecially virtualisation) the layer allows a lot of driver specific\ncode that works around the tty layer with private secondary queues to be\nremoved. The IBM folks need this sort of layer, the smart serial port\npeople do, the virtualisers do (because a virtualised tty typically\noperates at infinite speed rather than emulating 9600 baud).\n\nFinally many drivers had invalid and unsafe attempts to avoid buffer\noverflows by directly invoking tty methods extracted out of the innards\nof work queue structs. These are no longer needed and all go away. That\nfixes various random hangs with serial ports on overflow.\n\nThe other change in here is to optimise the receive_room path that is\nused by some callers. It turns out that only one ldisc uses receive room\nexcept asa constant and it updates it far far less than the value is\nread. We thus make it a variable not a function call.\n\nI expect the code to contain bugs due to the size alone but I\u0027ll be\nwatching and squashing them and feeding out new patches as it goes.\n\nBecause the buffers now dynamically expand you should only run out of\nbuffering when the kernel runs out of memory for real.  That means a lot of\nthe horrible hacks high performance drivers used to do just aren\u0027t needed any\nmore.\n\nDescription:\n\ntty_insert_flip_char is an old API and continues to work as before, as does\ntty_flip_buffer_push() [this is why many drivers dont need modification].  It\ndoes now also return the number of chars inserted\n\nThere are also\n\ntty_buffer_request_room(tty, len)\n\nwhich asks for a buffer block of the length requested and returns the space\nfound.  This improves efficiency with hardware that knows how much to\ntransfer.\n\nand tty_insert_flip_string_flags(tty, str, flags, len)\n\nto insert a string of characters and flags\n\nFor a smart interface the usual code is\n\n    len \u003d tty_request_buffer_room(tty, amount_hardware_says);\n    tty_insert_flip_string(tty, buffer_from_card, len);\n\nMore description!\n\nAt the moment tty buffers are attached directly to the tty.  This is causing a\nlot of the problems related to tty layer locking, also problems at high speed\nand also with bursty data (such as occurs in virtualised environments)\n\nI\u0027m working on ripping out the flip buffers and replacing them with a pool of\ndynamically allocated buffers.  This allows both for old style \"byte I/O\"\ndevices and also helps virtualisation and smart devices where large blocks of\ndata suddenely materialise and need storing.\n\nSo far so good.  Lots of drivers reference tty-\u003eflip.*.  Several of them also\ncall directly and unsafely into function pointers it provides.  This will all\nbreak.  Most drivers can use tty_insert_flip_char which can be kept as an API\nbut others need more.\n\nAt the moment I\u0027ve added the following interfaces, if people think more will\nbe needed now is a good time to say\n\n int tty_buffer_request_room(tty, size)\n\nTry and ensure at least size bytes are available, returns actual room (may be\nzero).  At the moment it just uses the flipbuf space but that will change.\nRepeated calls without characters being added are not cumulative.  (ie if you\ncall it with 1, 1, 1, and then 4 you\u0027ll have four characters of space.  The\nother functions will also try and grow buffers in future but this will be a\nmore efficient way when you know block sizes.\n\n int tty_insert_flip_char(tty, ch, flag)\n\nAs before insert a character if there is room.  Now returns 1 for success, 0\nfor failure.\n\n int tty_insert_flip_string(tty, str, len)\n\nInsert a block of non error characters.  Returns the number inserted.\n\n int tty_prepare_flip_string(tty, strptr, len)\n\nAdjust the buffer to allow len characters to be added.  Returns a buffer\npointer in strptr and the length available.  This allows for hardware that\nneeds to use functions like insl or mencpy_fromio.\n\nSigned-off-by: Alan Cox \u003calan@redhat.com\u003e\nCc: Paul Fulghum \u003cpaulkf@microgate.com\u003e\nSigned-off-by: Hirokazu Takata \u003ctakata@linux-m32r.org\u003e\nSigned-off-by: Serge Hallyn \u003cserue@us.ibm.com\u003e\nSigned-off-by: Jeff Dike \u003cjdike@addtoit.com\u003e\nSigned-off-by: John Hawkes \u003chawkes@sgi.com\u003e\nSigned-off-by: Martin Schwidefsky \u003cschwidefsky@de.ibm.com\u003e\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "725a6abfe37025975c125ace1c7da35f27ce5384",
      "tree": "dc10f24a25e1c765b63ea661c8859c7fa365d274",
      "parents": [
        "6e493882726e762d0eb7a0a5fcae42a122ae75a5"
      ],
      "author": {
        "name": "Richard Purdie",
        "email": "rpurdie@rpsys.net",
        "time": "Thu Jan 05 09:56:03 2006 +0000"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Jan 06 00:31:07 2006 +0100"
      },
      "message": "[PATCH] pcmcia: add some IDs for ide-cs and dtl1_cs\n\nAdd some PCMCIA device IDs for the microdrive found in the Sharp Zaurus\nand a different revision of the Socket CF+ Bluetooth card.\n\nSigned-off-by: Richard Purdie \u003crpurdie@rpsys.net\u003e\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n"
    },
    {
      "commit": "f8cfa618dccbdc6dab5297f75779566a388a98fd",
      "tree": "b91e0952038dafc6e03bf8b1d8948b1fdefec031",
      "parents": [
        "b463581154f3f3eecda27cae60df813fefcd84d3"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Nov 14 21:25:51 2005 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Jan 06 00:03:24 2006 +0100"
      },
      "message": "[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback\n\nUnify the EVENT_CARD_INSERTION and \"attach\" callbacks to one unified\nprobe() callback. As all in-kernel drivers are changed to this new\ncallback, there will be no temporary backwards-compatibility. Inside a\nprobe() function, each driver _must_ set struct pcmcia_device\n*p_dev-\u003einstance and instance-\u003ehandle correctly.\n\nWith these patches, the basic driver interface for 16-bit PCMCIA drivers\nnow has the classic four callbacks known also from other buses:\n\n        int (*probe)            (struct pcmcia_device *dev);\n        void (*remove)          (struct pcmcia_device *dev);\n\n        int (*suspend)          (struct pcmcia_device *dev);\n        int (*resume)           (struct pcmcia_device *dev);\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "b463581154f3f3eecda27cae60df813fefcd84d3",
      "tree": "5e5b0f7a32b0727b64e52b9b2649897e6c841074",
      "parents": [
        "f3990715589d378a2d3aa9b8accd78bb4a2378b7"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Nov 14 21:25:35 2005 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Jan 06 00:03:20 2006 +0100"
      },
      "message": "[PATCH] pcmcia: remove dev_list from drivers\n\nThe linked list of devices managed by each PCMCIA driver is, in very most\ncases, unused. Therefore, remove it from many drivers.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "cc3b4866bee996c922e875b8c8efe9f0d8803aae",
      "tree": "6632837b6986f33566f75ed971cecbdc210e3201",
      "parents": [
        "8e9e793d68fcda6cc84c18cedf85ca0f91d801a8"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Nov 14 21:23:14 2005 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Fri Jan 06 00:03:10 2006 +0100"
      },
      "message": "[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback\n\nUnify the \"detach\" and REMOVAL_EVENT handlers to one \"remove\" function.\nOld functionality is preserved, for the moment.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "98e4c28b7ec390c2dad6a4c69d69629c0f7e8b10",
      "tree": "b3d46f0643352e541d6a39e6da09059687cf713d",
      "parents": [
        "63e7ebd06402951bc8863ba5b7bc9b9f42044849"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Nov 14 21:21:18 2005 +0100"
      },
      "committer": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Thu Jan 05 23:59:02 2006 +0100"
      },
      "message": "[PATCH] pcmcia: new suspend core\n\nMove the suspend and resume methods out of the event handler, and into\nspecial functions. Also use these functions for pre- and post-reset, as\nalmost all drivers already do, and the remaining ones can easily be\nconverted.\n\nBugfix to include/pcmcia/ds.c\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\n\n"
    },
    {
      "commit": "75318d2d7cab77b14c5d3dbd5e69f2680a769e16",
      "tree": "13098167bd41d7dd0b0d3f678534a6daa29b4005",
      "parents": [
        "2143acc6dc79bdbff812f02a7dc5ab9d4fc81fc8"
      ],
      "author": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Mon Nov 21 14:53:03 2005 -0800"
      },
      "committer": {
        "name": "Greg Kroah-Hartman",
        "email": "gregkh@suse.de",
        "time": "Wed Jan 04 13:48:34 2006 -0800"
      },
      "message": "[PATCH] USB: remove .owner field from struct usb_driver\n\nIt is no longer needed, so let\u0027s remove it, saving a bit of memory.\n\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n"
    },
    {
      "commit": "1ebb92521d0bc2d4ef772730d29333c06b807191",
      "tree": "d480ca68fd4c7f1185e189942feef8d85edbb659",
      "parents": [
        "7ef934b3b73f74aea23aa0e98affe86d7ea816a3"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Nov 08 09:57:21 2005 -0800"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Nov 08 09:57:21 2005 -0800"
      },
      "message": "[Bluetooth]: Add endian annotations to the core\n\nThis patch adds the endian annotations to the Bluetooth core.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "7ef934b3b73f74aea23aa0e98affe86d7ea816a3",
      "tree": "9fb67c510698d25800033b2729f404c708b0c07f",
      "parents": [
        "89f5f0aeed14ac7245f760b0b96c9269c87bcbbe"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Nov 08 09:57:05 2005 -0800"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Nov 08 09:57:05 2005 -0800"
      },
      "message": "[Bluetooth]: Add another ignore parameter to the HCI USB driver\n\nThis patchs adds the module parameter ignore_dga to the HCI USB driver\nwhich makes it possible to prevent this driver from being loaded by\nsome buggy Digianswer devices.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "089b1dbbde28f0f641c20beabba28fa89ab4fab9",
      "tree": "d95a59688897569f2aa875ec5a9576caaedfc2cc",
      "parents": [
        "f5e3c2faa20615e900ab26bd957f898400435924"
      ],
      "author": {
        "name": "Deepak Saxena",
        "email": "dsaxena@plexity.net",
        "time": "Mon Nov 07 01:01:26 2005 -0800"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Mon Nov 07 07:54:00 2005 -0800"
      },
      "message": "[PATCH] bluetooth: kmalloc + memset -\u003e kzalloc conversion\n\nSigned-off-by: Deepak Saxena \u003cdsaxena@plexity.net\u003e\nCc: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "245dc3d19b6ff7db42c9f3cca9006c8db59e2dee",
      "tree": "e5b2594ccdad0af1901efd5f6109d9e28391e882",
      "parents": [
        "dd7f5527b3e68a7b2f715ae1a21164383f418013"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:57 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:57 2005 +0200"
      },
      "message": "[Bluetooth] Ignore additional interfaces of BPA 100/105 devices\n\nIf a BPA 100/105 device contains more then one interface then ignore the\nadditional interfaces, because they are unused.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "0372a6627f862f90a2c43772befeecef508cfd7b",
      "tree": "8e2d141927ac8d63663d8c88a6a0eb7e096d8a8b",
      "parents": [
        "20dd6f59d6ea5fe47397c5254606c76b1d047727"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:45 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:45 2005 +0200"
      },
      "message": "[Bluetooth] Cleanup of the HCI UART driver\n\nThis patch contains the big cleanup of the HCI UART driver. The uneeded\nheader files are removed and their structure declarations are moved into\nthe protocol implementations.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "20dd6f59d6ea5fe47397c5254606c76b1d047727",
      "tree": "ffc9b0a7f3d582120c997ec4277f561f9d8c6f87",
      "parents": [
        "408c1ce2716c7a004851c93f9f9dcf3d763bc240"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:40 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Fri Oct 28 19:20:40 2005 +0200"
      },
      "message": "[Bluetooth] Remove TXCRC compile option for BCSP driver\n\nThe TXCRC compile option is not really useful and thus change it\ninto a module parameter.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "dd0fc66fb33cd610bc1a5db8a5e232d34879b4d7",
      "tree": "51f96a9db96293b352e358f66032e1f4ff79fafb",
      "parents": [
        "3b0e77bd144203a507eb191f7117d2c5004ea1de"
      ],
      "author": {
        "name": "Al Viro",
        "email": "viro@ftp.linux.org.uk",
        "time": "Fri Oct 07 07:46:04 2005 +0100"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Sat Oct 08 15:00:57 2005 -0700"
      },
      "message": "[PATCH] gfp flags annotations - part 1\n\n - added typedef unsigned int __nocast gfp_t;\n\n - replaced __nocast uses for gfp flags with gfp_t - it gives exactly\n   the same warnings as far as sparse is concerned, doesn\u0027t change\n   generated code (from gcc point of view we replaced unsigned int with\n   typedef) and documents what\u0027s going on far better.\n\nSigned-off-by: Al Viro \u003cviro@zeniv.linux.org.uk\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "0915e8865fe4684dc82f043ac7036f34bf89f52a",
      "tree": "c1050f1de6eafc0d2e8650da0c58fbf83e27dcb5",
      "parents": [
        "354d28d5f8546e115ebaae9311897f0bc4b6a8d4"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Sep 13 01:32:37 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Sep 13 01:32:37 2005 +0200"
      },
      "message": "[Bluetooth] Add ignore parameters to the HCI USB driver\n\nThis patch adds the module parameters ignore_csr and ignore_sniffer\nto the HCI USB driver. This allows an easier use of CSR ROM chips\nthat need an additional initialization routine and the Frontline\nsniffers.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "0d48d93947dd9ea21c5cdc76a8581b06a4a39281",
      "tree": "96a1cbfe83a02e27fed3d30f1ac9f2fe05c17506",
      "parents": [
        "2eb25a6c34504254760e67172f7518d6bfdd7676"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Aug 09 20:30:28 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Aug 29 15:55:13 2005 -0700"
      },
      "message": "[Bluetooth]: Move packet type into the SKB control buffer\n\nThis patch moves the usage of packet type into the SKB control\nbuffer. After this patch it is now possible to shrink the sk_buff\nstructure and redefine its pkt_type.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "2eb25a6c34504254760e67172f7518d6bfdd7676",
      "tree": "fc2f39fedac03f773b7bbb3489774df57edc721c",
      "parents": [
        "3a5e903c09aed19ca4a1bb26d87b8d6461a93818"
      ],
      "author": {
        "name": "Victor Fusco",
        "email": "victor@cetuc.puc-rio.br",
        "time": "Tue Aug 09 20:29:11 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Aug 29 15:55:07 2005 -0700"
      },
      "message": "[Bluetooth]: Fix sparse warnings (__nocast type)\n\nThis patch fixes the sparse warnings \"implicit cast to nocast type\"\nfor the priority or gfp_mask parameters of the memory allocations.\n\nSigned-off-by: Victor Fusco \u003cvictor@cetuc.puc-rio.br\u003e\nSigned-off-by: Domen Puncer \u003cdomen@coderock.org\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "4aa769b99724953a6f322c648c0cfbe8c6616382",
      "tree": "464078550df33ac4f9c8eaf286e95a4f5f46a890",
      "parents": [
        "f6ccf55419c4f0021e7382f000f2fd14a29f3d3c"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Tue Aug 09 20:27:37 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Aug 29 15:54:42 2005 -0700"
      },
      "message": "[Bluetooth]: Update and cleanup of the virtual HCI driver\n\nThis patch cleans up the virtual HCI driver. It also adds support for\nthe dynamic minor device number allocation.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "8728b834b226ffcf2c94a58530090e292af2a7bf",
      "tree": "2fd51ff3b7097eb3ffc41ea3a1d8b3ba04715b4c",
      "parents": [
        "6869c4d8e066e21623c812c448a05f1ed931c9c6"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Tue Aug 09 19:25:21 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@sunset.davemloft.net",
        "time": "Mon Aug 29 15:31:14 2005 -0700"
      },
      "message": "[NET]: Kill skb-\u003elist\n\nRemove the \"list\" member of struct sk_buff, as it is entirely\nredundant.  All SKB list removal callers know which list the\nSKB is on, so storing this in sk_buff does nothing other than\ntaking up some space.\n\nTwo tricky bits were SCTP, which I took care of, and two ATM\ndrivers which Francois Romieu \u003cromieu@fr.zoreil.com\u003e fixed\nup.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\nSigned-off-by: Francois Romieu \u003cromieu@fr.zoreil.com\u003e\n"
    },
    {
      "commit": "66e8b6c31b9254243afaac8af4135e84e11dd38e",
      "tree": "cf25ee6d3b555a246be9bf8b783d3a92325cf5d9",
      "parents": [
        "e9a3e671c09d419f29710d8620ed916d3bf7d7ab"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:51 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:51 2005 +0200"
      },
      "message": "[Bluetooth] Remove unused functions and cleanup symbol exports\n\nThis patch removes the unused bt_dump() function and it also removes\nits BT_DMP macro. It also unexports the hci_dev_get(), hci_send_cmd()\nand hci_si_event() functions.\n\nSigned-off-by: Adrian Bunk \u003cbunk@stusta.de\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "e9a3e671c09d419f29710d8620ed916d3bf7d7ab",
      "tree": "6ce4e75810fc0724d05c305fc6b517aba23598c0",
      "parents": [
        "dcc365d8f28d6a2332fa37e64d669858a8d017e8"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:47 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:47 2005 +0200"
      },
      "message": "[Bluetooth] Kill redundant NULL checks before kfree()\n\nThere\u0027s no need to check for NULL before calling kfree() on a pointer.\n\nSigned-off-by: Jesper Juhl \u003cjuhl-lkml@dif.dk\u003e\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "cad0f6270c0bae5bcae6af3c7ac7bd3ae5d9b618",
      "tree": "958f349daed2ad3e1f4c97e94aabbef3c30c1d82",
      "parents": [
        "534afb90a9cd0b9643f62d660c164e1d924f39cf"
      ],
      "author": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:36 2005 +0200"
      },
      "committer": {
        "name": "Marcel Holtmann",
        "email": "marcel@holtmann.org",
        "time": "Sat Aug 06 12:36:36 2005 +0200"
      },
      "message": "[Bluetooth] Send HCI_Reset for Kensington dongle\n\nThe Kensington Bluetooth USB adapter is based on a Broadcom chip\nwith the HID proxy support. To initialize these kind of devices\ncorrectly it is necessary to send HCI_Reset as the first command.\n\nSigned-off-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\n"
    },
    {
      "commit": "b03efcfb2180289718991bb984044ce6c5b7d1b0",
      "tree": "f3b0c6c4eaf0991c28b7116a20994b48398eea57",
      "parents": [
        "a92b7b80579fe68fe229892815c750f6652eb6a9"
      ],
      "author": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Fri Jul 08 14:57:23 2005 -0700"
      },
      "committer": {
        "name": "David S. Miller",
        "email": "davem@davemloft.net",
        "time": "Fri Jul 08 14:57:23 2005 -0700"
      },
      "message": "[NET]: Transform skb_queue_len() binary tests into skb_queue_empty()\n\nThis is part of the grand scheme to eliminate the qlen\nmember of skb_queue_head, and subsequently remove the\n\u0027list\u0027 member of sk_buff.\n\nMost users of skb_queue_len() want to know if the queue is\nempty or not, and that\u0027s trivially done with skb_queue_empty()\nwhich doesn\u0027t use the skb_queue_head-\u003eqlen member and instead\nuses the queue list emptyness as the test.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n"
    },
    {
      "commit": "44670d2b50efd2443c3810239d6ea3fd02f8ef64",
      "tree": "a32aa41a9dd5eb33e657f94f823d44948f5be9c2",
      "parents": [
        "2ffe6e280f792790c39f241e7e3c5d2ef8da1b94"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Thu Jul 07 17:59:05 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Thu Jul 07 18:24:07 2005 -0700"
      },
      "message": "[PATCH] pcmcia: remove references to pcmcia/version.h\n\nAs a follow-up, remove the inclusion of pcmcia/version.h in many files.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1e212f3645a6b355de8c43a23376bc0e2ac49a63",
      "tree": "89324df417c19a1a63efb2ec6630e7d4b47181a0",
      "parents": [
        "bf45d9b0ac108b11245203ebb082d30f5059846b"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Thu Jul 07 17:59:00 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@g5.osdl.org",
        "time": "Thu Jul 07 18:24:05 2005 -0700"
      },
      "message": "[PATCH] pcmcia: move event handler\n\nMove the \"event handler\" to struct pcmcia_driver -- the unified event handler\nwill disappear really soon, but switching it to struct pcmcia_driver in the\nmeantime allows for better \"step-by-step\" patches.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "88eca2e526d087797a529aad478e5e6b42188415",
      "tree": "5414eba9257b1cdaff1cb732f55dc675373e67f4",
      "parents": [
        "7fb22bb4d044f11a675c6947eac4923b84e0289e"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Jun 27 16:28:39 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Mon Jun 27 18:03:15 2005 -0700"
      },
      "message": "[PATCH] pcmcia: id_table for dtl1_cs.c\n\nAdd pcmcia_device_id table.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "279c936153199e105b96429dec11233ae153667c",
      "tree": "4c7e0dae5371ca7d5a66cd249099b4fdfdba9448",
      "parents": [
        "a01c3ed48e3319f9a4eb4e43b8c6abe00f1a1389"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Jun 27 16:28:38 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Mon Jun 27 18:03:15 2005 -0700"
      },
      "message": "[PATCH] pcmcia: id_table for btuart_cs.c\n\nAdd pcmcia_device_id table.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "a01c3ed48e3319f9a4eb4e43b8c6abe00f1a1389",
      "tree": "3bfc937be27b3cfbc0bd8ea82c4d24343a1b2d0d",
      "parents": [
        "7f70cb6d9f8b0fd97215250cff797ff8c3b24f1d"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Jun 27 16:28:37 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Mon Jun 27 18:03:15 2005 -0700"
      },
      "message": "[PATCH] pcmcia: id_table for bt3c_cs.c\n\nAdd pcmcia_device_id table.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "7f70cb6d9f8b0fd97215250cff797ff8c3b24f1d",
      "tree": "07a3cd83b991f741ec1b13583e6dde33e2149af3",
      "parents": [
        "a13bcf0d5abaf21a1eb7a988915ab97152f57f78"
      ],
      "author": {
        "name": "Dominik Brodowski",
        "email": "linux@dominikbrodowski.net",
        "time": "Mon Jun 27 16:28:35 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Mon Jun 27 18:03:15 2005 -0700"
      },
      "message": "[PATCH] pcmcia: id_table for bluecard_cs.c\n\nAdd pcmcia_device_id table.\n\nSigned-off-by: Dominik Brodowski \u003clinux@dominikbrodowski.net\u003e\nAcked-by: Marcel Holtmann \u003cmarcel@holtmann.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "64ccd715d3cf498318b14b646ce5f97e7ab15bb5",
      "tree": "b43bdaeec1b1175fe80ffe3648b1a98a2e21317b",
      "parents": [
        "bfb07599da289881d3bcbb601a110e997fc7444b"
      ],
      "author": {
        "name": "Alexey Dobriyan",
        "email": "adobriyan@gmail.com",
        "time": "Thu Jun 23 00:10:33 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Thu Jun 23 09:45:36 2005 -0700"
      },
      "message": "[PATCH] Convert users to tty_unregister_ldisc()\n\ntty_register_ldisc(N_FOO, NULL) \u003d\u003e tty_unregister_ldisc(N_FOO)\n\nSigned-off-by: Alexey Dobriyan \u003cadobriyan@gmail.com\u003e\nSigned-off-by: Andrew Morton \u003cakpm@osdl.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@osdl.org\u003e\n"
    },
    {
      "commit": "1da177e4c3f41524e886b7f1b8a0c1fc7321cac2",
      "tree": "0bba044c4ce775e45a88a51686b5d9f90697ea9d",
      "parents": [],
      "author": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "committer": {
        "name": "Linus Torvalds",
        "email": "torvalds@ppc970.osdl.org",
        "time": "Sat Apr 16 15:20:36 2005 -0700"
      },
      "message": "Linux-2.6.12-rc2\n\nInitial git repository build. I\u0027m not bothering with the full history,\neven though we have it. We can create a separate \"historical\" git\narchive of that later if we want to, and in the meantime it\u0027s about\n3.2GB when imported into git - space that would just make the early\ngit days unnecessarily complicated, when we don\u0027t have a lot of good\ninfrastructure for it.\n\nLet it rip!\n"
    }
  ]
}