)]}' { "log": [ { "commit": "e4e72fb4de93e3d4047a4ee3f08778422e17ed0d", "tree": "dd133a749e6fa6960c9aa708041d996110f6440e", "parents": [ "cd8ffc800ce18e558335c4946b2217864fc16045" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:42 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:23 2009 -0400" }, "message": "mac80211/iwlwifi: move virtual A-MDPU queue bookkeeping to iwlwifi\n\nThis patch removes all the virtual A-MPDU-queue bookkeeping from\nmac80211. Curiously, iwlwifi already does its own bookkeeping, so\nit doesn\u0027t require much changes except where it needs to handle\nstarting and stopping the queues in mac80211.\n\nTo handle the queue stop/wake properly, we rewrite the software\nqueue number for aggregation frames and internally to iwlwifi keep\ntrack of the queues that map into the same AC queue, and only talk\nto mac80211 about the AC queue. The implementation requires calling\ntwo new functions, iwl_stop_queue and iwl_wake_queue instead of the\nmac80211 counterparts.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Reinette Chattre \u003creinette.chatre@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "cd8ffc800ce18e558335c4946b2217864fc16045", "tree": "e9bb8c3d6011e89374f9df353ff1f15d45a63590", "parents": [ "a220858d30604902f650074bfac5a7598bc97ea4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:41 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:22 2009 -0400" }, "message": "mac80211: fix aggregation to not require queue stop\n\nInstead of stopping the entire AC queue when enabling aggregation\n(which was only done for hardware with aggregation queues) buffer\nthe packets for each station, and release them to the pending skb\nqueue once aggregation is turned on successfully.\n\nWe get a little more code, but it becomes conceptually simpler and\nwe can remove the entire virtual queue mechanism from mac80211 in\na follow-up patch.\n\nThis changes how mac80211 behaves towards drivers that support\naggregation but have no hardware queues -- those drivers will now\nnot be handed packets while the aggregation session is being\nestablished, but only after it has been fully established.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b1720231ca07dee3382980f3b25e6581bd2e54e9", "tree": "4258dec3d4774ee5968f181533c77766c8584b79", "parents": [ "1870cd71e87da1a1afb904f2c84086f487a07135" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 17:28:39 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:22 2009 -0400" }, "message": "mac80211: unify and fix TX aggregation start\n\nWhen TX aggregation becomes operational, we do a number of steps:\n 1) print a debug message\n 2) wake the virtual queue\n 3) notify the driver\n\nUnfortunately, 1) and 3) are only done if the driver is first to\nreply to the aggregation request, it is, however, possible that the\nremote station replies before the driver! Thus, unify the code for\nthis and call the new function ieee80211_agg_tx_operational in both\nplaces where TX aggregation can become operational.\n\nAdditionally, rename the driver notification from\nIEEE80211_AMPDU_TX_RESUME to IEEE80211_AMPDU_TX_OPERATIONAL.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2b874e83c970b45c328ab12239b066a43505454c", "tree": "e4924ed6989f01682ec50910361b0d621dae0be4", "parents": [ "4a48e2a484e5cf99da4795cf2d6916e057d533ad" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Mar 23 14:10:22 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:15 2009 -0400" }, "message": "mac80211: rate control status only for controlled packets\n\nThis patch changes mac80211 to not notify the rate control algorithm\u0027s\ntx_status() method when reporting status for a packet that didn\u0027t go\nthrough the rate control algorithm\u0027s get_rate() method.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "04de83815993714a7ba2618f637fa1092a5f664b", "tree": "7e491e890a66a3be3e4eae9636914858a6f3bba8", "parents": [ "a08c1c1ac0c26229ca1ca45d554b209a56edc8be" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:35 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:13 2009 -0400" }, "message": "mac80211: add beacon filtering support\n\nAdd IEEE80211_HW_BEACON_FILTERING flag so that driver inform that it supports\nbeacon filtering. Drivers need to call the new function\nieee80211_beacon_loss() to notify about beacon loss.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9050bdd8589c373e01e41ddbd9a192de2ff01ef0", "tree": "a33c69c570d6db96bb54bb3b4b3eb5ea4b43d5ea", "parents": [ "15b7b0629c8213905926394dc73d600e0ca250ce" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Mar 22 21:57:21 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:12 2009 -0400" }, "message": "mac80211: disable power save when scanning\n\nWhen software scanning we need to disable power save so that all possible\nprobe responses and beacons are received. For hardware scanning assume that\nhardware will take care of that and document that assumption.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b3a902850a8f5bc11a660051faae707f928d4bd6", "tree": "0f99f1dcd8f4baf42169aecad0fc6204eba72746", "parents": [ "a9a6ffffd05f97e6acbdeafc595e269855829751" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Mar 18 14:29:38 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:13:00 2009 -0400" }, "message": "mac80211: kill IEEE80211_CONF_SHORT_SLOT_TIME\n\nNo drivers use it any more, so it can now be removed safely.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51b381479ff5bc9b8c49ce15fd8bc35c6b695ca4", "tree": "1a3a36914491900d5b68ef913eff36f7db433a40", "parents": [ "176be728ee7d32cfd33702d82c0733e51f66ab5b" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Mar 12 11:16:48 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:12:45 2009 -0400" }, "message": "mac80211: reduce max number of queues\n\nNo hw/driver actually supports more than four queues right now,\nand we allocate a number of things per queue which means we\nwaste a bit of memory. Reduce the maximum number to four to\naccurately reflect what we do (and need for QoS). Even if we\nhad hardware supporting more queues we couldn\u0027t take advantage\nof that right now anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "176be728ee7d32cfd33702d82c0733e51f66ab5b", "tree": "d7b8feb17aab8da7300562ac1dff74002d5ef503", "parents": [ "14587ce2a8898de959f32dfd505b4871f09930d5" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Mar 12 23:49:28 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Mar 27 20:12:42 2009 -0400" }, "message": "mac80211: remove ieee80211_num_regular_queues\n\nThis inline is useless and actually makes the code _longer_\nrather than shorter.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "80e775bf08f1915870fbb0c1c7a45a3fdc291721", "tree": "117d475755d5f4f0aba17f9efce8fa4fd51d0d10", "parents": [ "8821905cfb65504f64e6beb014133bd2a998f5dc" ], "author": { "name": "Michael Buesch", "email": "mb@bu3sch.de", "time": "Fri Feb 20 15:37:03 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:52:51 2009 -0500" }, "message": "mac80211: Add software scan notifiers\n\nThis adds optional notifier functions for software scan.\n\nSigned-off-by: Michael Buesch \u003cmb@bu3sch.de\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "81cb7623ad3b408f871fa36b774fc20d8dfccac0", "tree": "4a5f0811f0030059321858c634cf7ba5613fb78f", "parents": [ "b06e786d4c850515e2efdf6dc37ba9e2ffc86bab" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Thu Feb 12 11:38:37 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:51:45 2009 -0500" }, "message": "mac80211: Extend the rate control API with an update callback\n\nThe AP can switch dynamically between 20/40 Mhz channel width,\nin which case we switch the local operating channel, but the\nrate control algorithm is not notified. This patch adds a new callback\nto indicate such changes to the RC algorithm.\n\nCurrently, HT channel width change is notified, but this callback\ncan be used to indicate any new requirements that might come up later on.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "96f5e66e8a79810e2982cdcfa28e554f3d97da21", "tree": "d16a0e083b83ab488f20b995c56a496a4ec2c9c8", "parents": [ "f3734ee6df3ac57151e02d091f47d5e52e646539" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Feb 12 00:51:53 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 27 14:51:42 2009 -0500" }, "message": "mac80211: fix aggregation for hardware with ampdu queues\n\nHardware with AMPDU queues currently has broken aggregation.\n\nThis patch fixes it by making all A-MPDUs go over the regular AC queues,\nbut keeping track of the hardware queues in mac80211. As a first rough\nversion, it actually stops the AC queue for extended periods of time,\nwhich can be removed by adding buffering internal to mac80211, but is\ncurrently not a huge problem because people rarely use multiple TIDs\nthat are in the same AC (and iwlwifi currently doesn\u0027t operate as AP).\n\nThis is a short-term fix, my current medium-term plan, which I hope to\nexecute soon as well, but am not sure can finish before .30, looks like\nthis:\n 1) rework the internal queuing layer in mac80211 that we use for\n fragments if the driver stopped queue in the middle of a fragmented\n frame to be able to queue more frames at once (rather than just a\n single frame with its fragments)\n 2) instead of stopping the entire AC queue, queue up the frames in a\n per-station/per-TID queue during aggregation session initiation,\n when the session has come up take all those frames and put them\n onto the queue from 1)\n 3) push the ampdu queue layer abstraction this patch introduces in\n mac80211 into the driver, and remove the virtual queue stuff from\n mac80211 again\n\nThis plan will probably also affect ath9k in that mac80211 queues the\nframes instead of passing them down, even when there are no ampdu queues.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2a5193119269062608582418deba7af82844159a", "tree": "1f2fe8cffbeb7530dce7fa708310f6fb29ab0dd8", "parents": [ "849b7967818995a32c3017542e33eb3155944368" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Feb 10 21:25:55 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 13 13:45:49 2009 -0500" }, "message": "cfg80211/nl80211: scanning (and mac80211 update to use it)\n\nThis patch adds basic scan capability to cfg80211/nl80211 and\nchanges mac80211 to use it. The BSS list that cfg80211 maintains\nis made driver-accessible with a private area in each BSS struct,\nbut mac80211 doesn\u0027t yet use it. That\u0027s another large project.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7b08b3b4a973de20d28d8a322c002c0a5444002a", "tree": "a44ccd7138b1c85917dfdd87e3a6fd9c11ec01b1", "parents": [ "97d97b80984d0207e5c125c1b7b9467aad365d8d" ], "author": { "name": "Alina Friedrichsen", "email": "x-alina@gmx.net", "time": "Thu Feb 05 17:58:34 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Feb 13 13:44:40 2009 -0500" }, "message": "mac80211: Remove TSF atomic requirement from the documentation\n\nThe atomic requirement for the TSF callbacks\nis outdated. get_tsf() is only called by\nieee80211_rx_bss_info() which is indirectly\ncalled by the work queue ieee80211_sta_work().\nIn the same context are called several other\nnon-atomic functions, too.\nAnd the atomic requirement causes problems\nfor drivers of USB wifi cards.\n\nSigned-off-by: Alina Friedrichsen \u003cx-alina@gmx.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7fee5372d814c4be9546e5c28ac0058258d8df3e", "tree": "021aefd5c32d265f2ca6c9b379c11e0484aeba74", "parents": [ "7a7dec656252a5784218a22abf76ad1cdef115d0" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Jan 30 11:13:06 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Feb 09 15:03:44 2009 -0500" }, "message": "mac80211: remove HW_SIGNAL_DB\n\nGiving the signal in dB isn\u0027t much more useful to userspace\nthan giving the signal in unspecified units. This removes\nsome radiotap information for zd1211 (the only driver using\nthis flag), but it helps a lot for getting cfg80211-based\nscanning which won\u0027t support dB, and zd1211 being dB is a\nlittle fishy anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Bruno Randolf \u003cbruno@thinktube.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3b5d665b51cda73ef1a774b515afd879a38e3674", "tree": "68d71f6ac09f638b65ca1e256a17dfdb6c5b12b4", "parents": [ "3978e5bce63484789891c67413372da3915bcbd6" ], "author": { "name": "Alina Friedrichsen", "email": "x-alina@gmx.net", "time": "Sat Jan 24 07:09:59 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:46 2009 -0500" }, "message": "mac80211: Generic TSF debugging\n\nThis patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs.\n\nSigned-off-by: Alina Friedrichsen \u003cx-alina@gmx.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "c771c9d8da1e8292ef8bf7fd4ce135dacc650130", "tree": "79b259a6b0396cbecf9e775c7ba5a80e2c4d94c9", "parents": [ "506d03f97d10e54fd27c58c872a98242326d6419" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Jan 23 22:54:03 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:45 2009 -0500" }, "message": "mac80211: add interface list lock\n\nUsing only the RTNL has a number of problems, most notably that\nieee80211_iterate_active_interfaces() and other interface list\ntraversals cannot be done from the internal workqueue because it\nneeds to be flushed under the RTNL.\n\nThis patch introduces a new mutex that protects the interface list\nagainst modifications. A more detailed explanation is part of the\ncode change.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9a95371aa26e3cb9fb1340362912000088ff3c3e", "tree": "aaa8470b9304d344a2c15f30776b3dd1c044183a", "parents": [ "f976376de0d6a9697fb635369f12ae00251f4566" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Jan 22 15:05:53 2009 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:19 2009 -0500" }, "message": "mac80211: allow mac80211 drivers to get to struct ieee80211_hw from wiphy\n\nIf a driver is given a wiphy and it wants to get to its private\nmac80211 driver area it can use wiphy_to_ieee80211_hw() to get first\nto its ieee80211_hw and then access the private structure via hw-\u003epriv. The\nwiphy_priv() is already being used internally by mac80211 and drivers\nshould not use this. This can be helpful in a drivers reg_notifier().\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "078e1e60dd6c6b0d4bc8d58ccb80c008e8efc9ff", "tree": "7fa2580b76a5693a37449e9cc075eee2394bb0c3", "parents": [ "07c1e852514e862e246b9f2962ce8fc0d7ac8ed1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jan 22 18:07:31 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:13 2009 -0500" }, "message": "mac80211: Add capability to enable/disable beaconing\n\nThis patch adds a flag to notify drivers to start and stop\nbeaconing when needed, for example, during a scan run. Based\non Sujith\u0027s first patch to do the same, but now disables\nbeaconing for all virtual interfaces while scanning, has a\nseparate change flag and tracks user-space requests.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2134e7e724798cf8d54ae822afe235abb607d9b2", "tree": "3f409a1615d0d1d61dbce9242028b6249a67c8cb", "parents": [ "e129a948c906200db87727822559c09b62278824" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Thu Jan 22 09:00:52 2009 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:10 2009 -0500" }, "message": "mac80211: Add documentation bits for mac80211_rate_control_flags\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "881d948c23442173a011f1adcfe4c95bf7f27515", "tree": "3d7e6a4bf23b960cf45a4d2c5734578168ce0424", "parents": [ "369391db1aabd089cefaadaabb6d9fc82e78b0a7" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 21 15:13:48 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:09 2009 -0500" }, "message": "wireless: restrict to 32 legacy rates\n\nSince the standards only define 12 legacy rates, 32 is certainly\na sane upper limit and we don\u0027t need to use u64 everywhere. Add\nsanity checking that no more than 32 rates are registered and\nchange the variables to u32 throughout.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5f936f11613c32ca7f8ed5fa333bb38a4501deeb", "tree": "6963b1e32eaa4d4bdb14655c9e8f209bf0e2c7f7", "parents": [ "e9414b6b3f34dcc3683e66dffa4f5f167d49df51" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 21 12:47:05 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:01:07 2009 -0500" }, "message": "mac80211: constify ieee80211_if_conf.bssid\n\nThen one place can be a static const.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6dd1bf3118b62a3ce241dc2b7e05e3d4a28c9eb1", "tree": "0bbd7a254372af31b534f36f45ac7db751ddc7fe", "parents": [ "e724b8fef6088e5dd240b53a38443e48fbcc8e93" ], "author": { "name": "Bob Copeland", "email": "me@bobcopeland.com", "time": "Thu Jan 08 21:00:34 2009 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:17 2009 -0500" }, "message": "mac80211: document return codes from ops callbacks\n\nFor any callbacks in ieee80211_ops, specify what values the return\ncodes represent. While at it, fix a couple of capitalization and\npunctuation differences.\n\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nReviewed-by: Kalle Valo \u003ckalle.valo@iki.fi\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4375d08350e3661d5e8860d33eea084e47ba01cf", "tree": "bb4df587cbe044700e0f29900c51e54ebd06ddd3", "parents": [ "1f7d77ab69789980dad44e1af7afd3a68cd48276" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Jan 08 13:32:11 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:08 2009 -0500" }, "message": "mac80211: 802.11w - Add driver capability flag for MFP\n\nThis allows user space to determine whether a driver supports MFP and\nbehave properly without having to ask user to configure this in\nMFP-optional mode.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "1f7d77ab69789980dad44e1af7afd3a68cd48276", "tree": "35406a27e707f0ebda27aaada47bc4c90fb26d31", "parents": [ "63a5ab82255a4ff5d0783f16427210f1d45d7ec8" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Jan 08 13:32:10 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:08 2009 -0500" }, "message": "mac80211: 802.11w - Optional software CCMP for management frames\n\nIf driver/firmware/hardware does not support CCMP for management\nframes, it can now request mac80211 to take care of encrypting and\ndecrypting management frames (when MFP is enabled) in software. The\nwill need to add this new IEEE80211_KEY_FLAG_SW_MGMT flag when a CCMP\nkey is being configured for TX side and return the undecrypted frames\non RX side without RX_FLAG_DECRYPTED flag to use software CCMP for\nmanagement frames (but hardware for data frames).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3cfcf6ac6d69dc290e96416731eea5c88ac7d426", "tree": "35bc626e2e3f7c37a7eb50c1f057adb4830eccc6", "parents": [ "765cb46a3fc856245ea68a7c961ac87c77e4ae2d" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Thu Jan 08 13:32:02 2009 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 16:00:03 2009 -0500" }, "message": "mac80211: 802.11w - Use BIP (AES-128-CMAC)\n\nAdd mechanism for managing BIP keys (IGTK) and integrate BIP into the\nTX/RX paths.\n\nSigned-off-by: Jouni Malinen \u003cj@w1.fi\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4be8c3873e0b88397866d3ede578503e188f9ad2", "tree": "1ccf8a0c204bb01aca08d90c2d8c37b5e0439bd3", "parents": [ "acbaf32e94cb70218792cac68e5149e482e77441" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 07 18:28:20 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:58 2009 -0500" }, "message": "mac80211: extend/document powersave API\n\nThis modifies hardware flags for powersave to support three different\nflags:\n * IEEE80211_HW_SUPPORTS_PS - indicates general PS support\n * IEEE80211_HW_PS_NULLFUNC_STACK - indicates nullfunc sending in software\n * IEEE80211_HW_SUPPORTS_DYNAMIC_PS - indicates dynamic PS on the device\n\nIt also adds documentation for all this which explains how to set the\nvarious flags.\n\nAdditionally, it fixes a few things:\n * a spot where \u0026\u0026 was used to test flags\n * enable CONF_PS only when associated again\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "46f2c4bd7e2ba2cfedbcd4fe15d316eebc608cba", "tree": "70df1219af8e137032a01560e6ca8ac216dbf24c", "parents": [ "e9aeabaeb9a0bece50100dc74bbd720a68cb8f5c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jan 06 18:13:18 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:56 2009 -0500" }, "message": "mac80211: move dynamic PS timeout to hardware config\n\nThis will be needed for drivers that set the\nIEEE80211_HW_NO_STACK_DYNAMIC_PS flag and still\nwant to handle dynamic PS.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nReviewed-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4797938c5dfa22af30fd16679192972f878419a1", "tree": "5e9de4801903f0e8fd5aac75c26295ed0069667a", "parents": [ "47166791b7296db5c0a7189401e42b8c7f4cca25" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jan 07 10:13:27 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:55 2009 -0500" }, "message": "mac80211: clean up channel type config\n\nThe channel_type really doesn\u0027t need to be the only member in\na new structure, so remove the struct. Additionally, remove\nthe _CONF_CHANGE_HT flag and use _CONF_CHANGE_CHANNEL when the\nchannel type changes, since that\u0027s enough of a change to require\nreprogramming the hardware anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "2bf30fabadbdcb535b057afc92aba015884847dc", "tree": "7a0234aeb666602e7b25a62bb7e483be0fb4a742", "parents": [ "8465676241cad5e28a1b745c32a0e18e1f67e18e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jan 06 23:23:56 2009 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:53 2009 -0500" }, "message": "mac80211: remove user_power_level from driver API\n\nI missed this during review of \"mac80211: Fix tx power setting\",\nthe user_power_level shouldn\u0027t be available to the driver but\nrather be an internal value used to calculate the value for the\ndriver.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "dc822b5db479dc0178d5c04cbb656dad0b6564fb", "tree": "f06d09fb4d70830ce1489f4589cb03a491833955", "parents": [ "b3093664c931aa06fc50da42e25b3b6dc307a915" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Dec 29 12:55:09 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:42 2009 -0500" }, "message": "mac80211: clean up set_key callback\n\nThe set_key callback now seems rather odd, passing a MAC address\ninstead of a station struct, and a local address instead of a\nvif struct. Change that.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nAcked-by: Bob Copeland \u003cme@bobcopeland.com\u003e [ath5k]\nAcked-by: Ivo van Doorn \u003civdoorn@gmail.com\u003e [rt2x00]\nAcked-by: Christian Lamparter \u003cchunkeey@web.de\u003e [p54]\nTested-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e [iwl3945]\nTested-by: Samuel Ortiz \u003csamuel@sortiz.org\u003e [iwl3945]\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e3c92df08cbf6a0cb60a9c7ce377378383967e07", "tree": "088d70d7924c6dac0e900d4190db928623ec3c76", "parents": [ "a085ff718c8c9f14c44feb337774fadfd982e1a5" ], "author": { "name": "Vasanthakumar Thiagarajan", "email": "vasanth@atheros.com", "time": "Wed Dec 24 13:53:11 2008 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:36 2009 -0500" }, "message": "mac80211: Fix tx power setting\n\npower_level in ieee80211_conf is being used for more than one\npurpose. It being used as user configured power limit and the\nfinal power limit given to the driver. By doing so, except very\nfirst time, the tx power limit is taken from min(chan-\u003emax_power,\nlocal-\u003ehw.conf.power_level) which is not what we want. This patch\ndefines a new memeber in ieee80211_conf which is meant only for\nuser configured power limit.\n\nSigned-off-by: Vasanthakumar Thiagarajan \u003cvasanth@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "285256a59d790c6a9afe8ec82804a369d956ac06", "tree": "679c78347f255f3a1e198c2cbba98463a99185e5", "parents": [ "de27e64e5eb72ff3edcaf5edce2f306ada1f094d" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Dec 23 15:58:45 2008 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:32 2009 -0500" }, "message": "mac80211: no need for ht.enabled\n\nWe can simply use conf_is_ht() check where needed.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "10c806b32db1c9f010945e92043ef2a3f6fffc3f", "tree": "fc971f55e0f4b30a63a024ad786498f6b6bc3f36", "parents": [ "51af3d3fbbe326077a7e245268a7de325de6ecd2" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Dec 23 15:58:36 2008 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Jan 29 15:59:27 2009 -0500" }, "message": "mac80211: add HT conf helpers\n\nIn HT capable drivers you often need to check if you\nare currently using HT20 or HT40. This adds a few small\nhelpers to let drivers figure that out.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b6b50a21625bbf59a89b807dd0fc1eb5412aeff3", "tree": "6aa7bd968089f4d0858a6748bac714dd3d36df07", "parents": [ "ef15aa490f2e447ce04fe643500b814ef40f6ea9" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Fri Jan 09 15:25:09 2009 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jan 16 17:08:23 2009 -0500" }, "message": "mac80211: more kernel-doc fixes\n\nFix (delete) more mac80211 kernel-doc:\n\nWarning(linux-2.6.28-git13//include/net/mac80211.h:375): Excess struct/union/enum/typedef member \u0027retry_count\u0027 description in \u0027ieee80211_tx_info\u0027\nWarning(linux-2.6.28-git13//net/mac80211/sta_info.h:308): Excess struct/union/enum/typedef member \u0027last_txrate\u0027 description in \u0027sta_info\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "520eb82076993b7f55ef9b80771d264272e5127b", "tree": "f98b74dbe404d4c3a55b5f649c25ca24958e62ba", "parents": [ "ce7c9111a97492d04c504f40736a669c235d664a" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Thu Dec 18 23:35:27 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:24:00 2008 -0500" }, "message": "mac80211: implement dynamic power save\n\nThis patch implements dynamic power save for mac80211. Basically it\nmeans enabling power save mode after an idle period. Implementing it\ndynamically gives a good compromise of low power consumption and low\nlatency. Some hardware have support for this in firmware, but some\nrequire the host to do it.\n\nThe dynamic power save is implemented by adding an timeout to\nieee80211_subif_start_xmit(). The timeout can be enabled from userspace\nwith Wireless Extensions. For example, the command below enables the\ndynamic power save and sets the time timeout to 500 ms:\n\niwconfig wlan0 power timeout 500m\n\nPower save now only works with devices which handle power save in firmware.\nIt\u0027s also disabled by default and the heuristics when and how to enable is\nconsidered as a policy decision and will be left for the userspace to handle.\nIn case the firmware has support for this, drivers can disable this feature\nwith IEEE80211_HW_NO_STACK_DYNAMIC_PS.\n\nBig thanks to Johannes Berg for the help with the design and code.\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0fb8ca45eb164c405eef8978f26829f9348b4d4d", "tree": "1fc5728b225e7d5a0d06bb0700c83d64bde44f82", "parents": [ "9d8eed12dbc04f8ed70090da14211c808b5a8d81" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Fri Dec 12 14:38:33 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:23:04 2008 -0500" }, "message": "mac80211: Add HT rates into RX status reporting\n\nThis patch adds option for HT-enabled drivers to report HT rates\n(HT20/HT40, short GI, MCS index) to mac80211. These rates are\ncurrently not in the rate table, so the rate_idx is used to indicate\nMCS index.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "094d05dc32fc2930e381189a942016e5561775d9", "tree": "4deedbcbe196f88cb8d9fe0cd0755775a7ff0939", "parents": [ "420e7fabd9c6d907280ed6b3e40eef425c5d8d8d" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Fri Dec 12 11:57:43 2008 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 19 15:22:54 2008 -0500" }, "message": "mac80211: Fix HT channel selection\n\nHT management is done differently for AP and STA modes, unify\nto just the -\u003econfig() callback since HT is fundamentally a\nPHY property and cannot be per-BSS.\n\nRename enum nl80211_sec_chan_offset as nl80211_channel_type to denote\nthe channel type ( NO_HT, HT20, HT40+, HT40- ).\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "89fad578a61810b7fdf8edd294890f3c0cde4390", "tree": "7f8c3f45f83e3c1934b447a54d9971fcb4364eaa", "parents": [ "dd397dc9dddfa2149a1bbc9e52ac7d5630737cec" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@web.de", "time": "Tue Dec 09 16:28:06 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 12 14:01:42 2008 -0500" }, "message": "mac80211: integrate sta_notify_ps cmds into sta_notify\n\nThis patch replaces the newly introduced sta_notify_ps function,\nwhich can be used to notify the driver about every power state\ntransition for all associated stations, by integrating its functionality\nback into the original sta_notify callback.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f546638c3f809fdacddc03fe765669c3042e0d9d", "tree": "2f5936ca90d2774ce33c03f96065ef561443af51", "parents": [ "e4f2a3458f451d5fb6aa55aac6aaadcf220d0da1" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Dec 09 12:30:03 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 12 14:01:33 2008 -0500" }, "message": "mac80211: remove fragmentation offload functionality\n\nThere\u0027s no driver that actually does fragmentation on the\ndevice, and the callback is buggy (when it returns an error,\nmac80211\u0027s fragmentation status is changed so reading the\nfrag threshold from userspace reads the new value despite\nthe error). Let\u0027s just remove it, if we really find some\nhardware supporting it we can add it back later.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7ba1c04ed727a70df2dc63464232c0ec906ad67d", "tree": "c146057793701b7b828d3bf726984ca94ee0b80c", "parents": [ "8ee5afbc9d2162f0919dd089023fb690f7cf8134" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Dec 08 11:18:32 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 12 13:48:25 2008 -0500" }, "message": "mac80211: improve sta_notify documentation\n\nMention more possible STA entries and document the atomic requirement.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8bef7a10014c4579c66579ab47fc1bb9563ac42a", "tree": "d446d570f9bc3e2f3a9bf946e235e12f8cfb0757", "parents": [ "02e37ba1298359baa123cf71ffa03d92abd259b2" ], "author": { "name": "Kalle Valo", "email": "kalle.valo@nokia.com", "time": "Sun Nov 30 20:56:28 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 05 09:35:45 2008 -0500" }, "message": "mac80211: document ieee80211_tx_info.pad\n\nFixes htmldocs warning:\n\nWarning(mac80211.h:379): No description found for parameter \u0027pad[2]\u0027\n\nSigned-off-by: Kalle Valo \u003ckalle.valo@nokia.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4571d3bf87b76eae875283ff9f7243984b5ddcae", "tree": "7c621ac727de783f9446765208470a53aeafb184", "parents": [ "2a163c6de452c0b321396caceac5d163949b4cf2" ], "author": { "name": "Christian Lamparter", "email": "chunkeey@web.de", "time": "Sun Nov 30 00:48:41 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 05 09:35:43 2008 -0500" }, "message": "mac80211: add sta_notify_ps callback\n\nThis patch is necessary in order to provide a proper Access point support for p54.\nUnfortunately for us, there is no documented way to disable the interfering\npower save buffering mechanism in firmware completely.\n\nTherefore we give in and notify the driver through our new sta_notify_ps callback,\nso that we can update the filter state.\n\nSigned-off-by: Christian Lamparter \u003cchunkeey@web.de\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "72bdcf34380917260da41e3c49e10edee04bc5cd", "tree": "cbfb8e389f58514febf47ea62781517a9df42f25", "parents": [ "72eaa43a532b4156966444779829a986a4432f11" ], "author": { "name": "Jouni Malinen", "email": "j@w1.fi", "time": "Wed Nov 26 16:15:24 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Dec 05 09:32:11 2008 -0500" }, "message": "nl80211: Add frequency configuration (including HT40)\n\nThis patch adds new NL80211_CMD_SET_WIPHY attributes\nNL80211_ATTR_WIPHY_FREQ and NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET to allow\nuserspace to set the operating channel (e.g., hostapd for AP mode).\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "627271018df75c8861b9e75b39d5995842e6ec95", "tree": "9f77eecc9fa2093f0b114f00ee6356c1ececdb47", "parents": [ "beb2a7f331361bfe81e71acdb0739eae570475a2" ], "author": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Nov 12 10:01:41 2008 -0500" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 21 11:08:18 2008 -0500" }, "message": "mac80211: add explicit padding in struct ieee80211_tx_info\n\nOtherwise, the BUILD_BUG_ON calls in ieee80211_tx_info_clear_status can\nfail on some architectures.\n\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0ed94eaaed618634f68197161203aac9f849471e", "tree": "daa650a6f9272f21c2dd5f3e6ed33fbd1a2e639c", "parents": [ "e4e58cf8cc646d93de852f32f972448a95387c60" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Fri Nov 07 19:50:42 2008 -0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 21 11:08:15 2008 -0500" }, "message": "mac80211: remove more excess kernel-doc\n\nDelete kernel-doc struct descriptions for fields that don\u0027t exist:\n\nWarning(include/net/mac80211.h:1263): Excess struct/union/enum/typedef member \u0027conf_ht\u0027 description in \u0027ieee80211_ops\u0027\nWarning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member \u0027addr\u0027 description in \u0027sta_info\u0027\nWarning(net/mac80211/sta_info.h:309): Excess struct/union/enum/typedef member \u0027aid\u0027 description in \u0027sta_info\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\ncc: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\ncc: John W. Linville \u003clinville@tuxdriver.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4821277f36e008b531728e359fbbedb229117f4b", "tree": "7e73197e8f5ae76133c84f8c6cd0bab3d97ad5f8", "parents": [ "8b0162a3dc5c30e862b7a73da29e32de3170f5e4" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Mon Nov 03 21:05:01 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Nov 21 11:06:05 2008 -0500" }, "message": "mac80211: fix BUILD_BUG_ON() caused by misalignment on arm\n\nOn ARM alignment is done slightly different from other architectures.\nstruct ieee80211_tx_rate is aligned to word size, even though it only has 3\nsingle-byte members, which triggers the BUILD_BUG_ON in\nieee80211_tx_info_clear_status\n\nThis patch marks the struct ieee80211_tx_rate as packed, so that ARM\nbehaves like the other architectures.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6ab33d51713d6d60c7677c0d020910a8cb37e513", "tree": "546c2ff099b2757e75cf34ddace874f1220f740e", "parents": [ "7be6065b39c3f1cfa796667eac1a2170465acc91", "13d428afc007fcfcd6deeb215618f54cf9c0cae6" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Nov 20 16:44:00 2008 -0800" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Nov 20 16:44:00 2008 -0800" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tdrivers/net/ixgbe/ixgbe_main.c\n\tinclude/net/mac80211.h\n\tnet/phonet/af_phonet.c\n" }, { "commit": "8e3bad65a59915f2ddc40f62a180ad81695d8440", "tree": "d54daf1d8d09192afdccfe913c0a22a6b0c0c5f5", "parents": [ "9b44fb89cab6e01816cdc05d6b59fdcf8100b8c3" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Nov 17 10:59:59 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Nov 18 17:26:26 2008 -0500" }, "message": "mac80211: remove ieee80211_notify_mac\n\nBefore ieee80211_notify_mac() was added, it was presented with the\nuse case of using it to tell mac80211 that the association may\nhave been lost because the firmware crashed/reset.\n\nSince then, it has also been used by iwlwifi to (slightly) speed\nup re-association after resume, a workaround around the fact that\nmac80211 has no suspend/resume handling yet. It is also not used\nby any other drivers, so clearly it cannot be necessary for \"good\nenough\" suspend/resume.\n\nUnfortunately, the callback suffers from a severe problem: It only\nworks for station mode. If suspend/resume happens while in IBSS or\nany other mode (but station), then the callback is pointless.\n\nRecently, it has created a number of locking issues, first because\nit required rtnl locking rather than RCU due to calling sleeping\nfunctions within the critical section, and now because it\u0027s called\nby iwlwifi from the mac80211 workqueue that may not use the rtnl\nbecause it is flushed under rtnl.\n(cf. http://bugzilla.kernel.org/show_bug.cgi?id\u003d12046)\n\nI think, therefore, that we should take a step back, remove it\nentirely for now and add the small feature it provided properly.\nFor suspend and resume we will need to introduce new hooks, and for\nthe case where the firmware was reset the driver will probably\nsimply just pretend it has done a suspend/resume cycle to get\nmac80211 to reprogram the hardware completely, not just try to\nconnect to the current AP again in station mode. When doing so, we\nwill need to take into account locking issues and possibly defer\nto schedule_work from within mac80211 for the resume operation,\nwhile the suspend operation must be done directly.\n\nProper suspend/resume should also not necessarily try to reconnect\nto the current AP, the time spent in suspend may have been short\nenough to not be disconnected from the AP, mac80211 will detect\nthat the AP went out of range quickly if it did, and if the\nassociation is lost then the AP will disassoc as soon as a data\nframe is sent. We might also take into account WWOL then, and\nhave mac80211 program the hardware into such a mode where it is\navailable and requested.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8469cdef1f123e2e3e56645f1ac26c7cfb333d9c", "tree": "40f9cffd53ee14f16334dcb96447484eeb93e0d6", "parents": [ "dca3edb88ef567671886a85c5e40d491ccecf934" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Wed Oct 29 10:19:28 2008 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 10 15:17:32 2008 -0500" }, "message": "mac80211: Add a new event in ieee80211_ampdu_mlme_action\n\nSend a notification to the driver on succesful\nreception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME\nfor this purpose.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "41bb73eeac5ff5fb217257ba33b654747b3abf11", "tree": "766ebc2b0da42bb30abbc59ec9a2dd4e43f7a825", "parents": [ "b23f99bcfa12c7b452f7ad201ea5921534d4e9ff" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Oct 29 01:09:37 2008 +0100" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Nov 10 15:11:56 2008 -0500" }, "message": "mac80211: remove SSID driver code\n\nRemove the SSID from the driver API since now there is no\ndriver that requires knowing the SSID and I think it\u0027s\nunlikely that any hardware design that does require the\nSSID will play well with mac80211.\n\nThis also removes support for setting the SSID in master\nmode which will require a patch to hostapd to not try.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e25cf4a6945e0f859186231be7164ba565412e0a", "tree": "0526b4d6692617a68ea72252607c755cd57216d9", "parents": [ "4c2442980043b9585be12b4f59e1bbe7e1f7a801" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Oct 23 08:51:20 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:02:36 2008 -0400" }, "message": "mac80211: fix two kernel-doc warnings\n\nOne parameter wasn\u0027t described and one I forgot to update when\nrenaming it; also update TBDs in sta_info.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "8b30b1fe368ab03049435884c11c5c50e4c4ef0b", "tree": "02b27b36cf90267d59584b493ad652e3a4cc6a7e", "parents": [ "4393dce9402c58744433c7a4f3931e17ddde4fb4" ], "author": { "name": "Sujith", "email": "Sujith.Manoharan@atheros.com", "time": "Fri Oct 24 09:55:27 2008 +0530" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:02:14 2008 -0400" }, "message": "mac80211: Re-enable aggregation\n\nWireless HW without any dedicated queues for aggregation\ndo not need the ampdu_queues mechanism present right now\nin mac80211. Since mac80211 is still incomplete wrt TX MQ\nchanges, do not allow aggregation sessions for drivers that\nset ampdu_queues.\n\nThis is only an interim hack until Intel fixes the requeue issue.\n\nSigned-off-by: Sujith \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: Luis Rodriguez \u003cLuis.Rodriguez@Atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e37d4dffdffb7f834bd28d4ae8e3dcdf07fce508", "tree": "16017523c380e7d2e507647f93b7a22c4d478c6e", "parents": [ "558875112c28c7b2744a92c9836c256dd57bc5b6" ], "author": { "name": "Bob Copeland", "email": "me@bobcopeland.com", "time": "Mon Oct 20 21:20:27 2008 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:41 2008 -0400" }, "message": "mac80211: fix a few typos in mac80211 kernel doc\n\nCorrect a handful of errors found while reading the mac80211 book.\n\nSigned-off-by: Bob Copeland \u003cme@bobcopeland.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "50fb2e4572141770380f5919793c6e575fa3474b", "tree": "6227726fda3e7b54515b6738bcf62b5f395ded23", "parents": [ "65a0667b43ff746b2964b2a257ffff1a4747e19d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Oct 16 11:21:49 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:37 2008 -0400" }, "message": "mac80211: remove rate_control_clear\n\n\"Clearing\" the rate control algorithm is pointless, none of\nthe algorithms actually uses this operation and it\u0027s not even\ninvoked properly for all channel switching. Also, there\u0027s no\nneed to since rate control algorithms work per station.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e6a9854b05c1a6af1308fe2b8c68f35abf28a3ee", "tree": "241f611f8194586ccabf61bacb060508773b9d05", "parents": [ "cb121bad67a32cde37adc2729b7e18aa4fd3063e" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 21 12:40:02 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:23 2008 -0400" }, "message": "mac80211/drivers: rewrite the rate control API\n\nSo after the previous changes we were still unhappy with how\nconvoluted the API is and decided to make things simpler for\neverybody. This completely changes the rate control API, now\ntaking into account 802.11n with MCS rates and more control,\nmost drivers don\u0027t support that though.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ae5eb02641233a4e9d1b92d22090f1b1afa14466", "tree": "117b7cb5efa3ff1cf714218098fc6db3820ed4e0", "parents": [ "bda3933a8aceedd03e0dd410844bd310033ca756" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 14 16:58:37 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:16 2008 -0400" }, "message": "mac80211: rewrite HT handling\n\nThe HT handling has the following deficiencies, which I\u0027ve\n(partially) fixed:\n * it always uses the AP info even if there is no AP,\n hence has no chance of working as an AP\n * it pretends to be HW config, but really is per-BSS\n * channel sanity checking is left to the drivers\n * it generally lets the driver control too much\n\nHT enabling is still wrong with this patch if you have more than\none virtual STA mode interface, but that never happens currently.\nOnce WDS, IBSS or AP/VLAN gets HT capabilities, it will also be\nwrong, see the comment in ieee80211_enable_ht().\n\nAdditionally, this fixes a number of bugs:\n * mac80211: ieee80211_set_disassoc doesn\u0027t notify the driver any\n more since the refactoring\n * iwl-agn-rs: always uses the HT capabilities from the wrong stuff\n mac80211 gives it rather than the actual peer STA\n * ath9k: a number of bugs resulting from the broken HT API\n\nI\u0027m not entirely happy with putting the HT capabilities into\nstruct ieee80211_sta as restricted to our own HT TX capabilities,\nbut I see no cleaner solution for now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "bda3933a8aceedd03e0dd410844bd310033ca756", "tree": "f4d2c70a6338e500b6db93b073801181280b1840", "parents": [ "9124b07740c51cbc6e358dd0c4abc6ee8ded084d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Sat Oct 11 01:51:51 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:15 2008 -0400" }, "message": "mac80211: move bss_conf into vif\n\nMove bss_conf into the vif struct so that drivers can\naccess it during -\u003etx without having to store it in\nthe private data or similar. No driver updates because\nthis is only for when they want to start using it.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9124b07740c51cbc6e358dd0c4abc6ee8ded084d", "tree": "5746885ca90399588f0735aa1a5511648f0be329", "parents": [ "525181891fb5ed323b6ba0f141c422f1395acfb9" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 14 19:17:54 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:14 2008 -0400" }, "message": "mac80211: make retry limits part of hw config\n\nInstead of having a separate callback, use the HW config callback\nwith a new flag to change retry limits.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e8975581f63870be42ff4662b293d1b0c8c21350", "tree": "3d0d67e73d009ea6480b459585c0a70fc35fa9da", "parents": [ "0f4ac38b5999c3d51adad52d61c56c1b99c247ec" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Oct 09 12:18:51 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:07 2008 -0400" }, "message": "mac80211: introduce hw config change flags\n\nThis makes mac80211 notify the driver which configuration\nactually changed, e.g. channel etc.\n\nNo driver changes, this is just plumbing, driver authors are\nexpected to act on this if they want to.\n\nAlso remove the HW CONFIG debug printk, it\u0027s incorrect, often\nwe configure something else.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "0f4ac38b5999c3d51adad52d61c56c1b99c247ec", "tree": "0376bd4904597495ce788883d371d794e8c85f69", "parents": [ "d9fe60dea7779d412b34679f1177c5ca1940ea8d" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Oct 09 12:18:04 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:06 2008 -0400" }, "message": "mac80211: kill hw.conf.antenna_sel_{rx,tx}\n\nNever actually used.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d9fe60dea7779d412b34679f1177c5ca1940ea8d", "tree": "a51e16b013f7c1d16ded502cb32c03872bcbfcaa", "parents": [ "40333e4fb476014cdd939d27e20eb54573172b32" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Oct 09 12:13:49 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 19:00:06 2008 -0400" }, "message": "802.11: clean up/fix HT support\n\nThis patch cleans up a number of things:\n * the unusable definition of the HT capabilities/HT information\n information elements\n * variable names that are hard to understand\n * mac80211: move ieee80211_handle_ht to ht.c and remove the unused\n enable_ht parameter\n * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht\n * mac80211: fix bug with casting the result of ieee80211_bss_get_ie\n to an information element _contents_ rather than the\n whole element, add size checking (another out-of-bounds\n access bug fixed!)\n * mac80211: remove some unused return values in favour of BUG_ON\n checking\n * a few minor other things\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "7a5158ef8da70fdedeb0530faaa8128aa645be3c", "tree": "6db285b5fc4971c5e15168fc0fb7cf442b89f168", "parents": [ "e87a2feea75e3cba7af43ed9317b56b282d87742" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Oct 08 10:59:33 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 18:58:53 2008 -0400" }, "message": "mac80211: fix short slot handling\n\nThis patch makes mac80211 handle short slot requests from the AP\nproperly. Also warn about uses of IEEE80211_CONF_SHORT_SLOT_TIME\nand optimise out the code since it cannot ever be hit anyway.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e87a2feea75e3cba7af43ed9317b56b282d87742", "tree": "3565c7758def16a84cba37202846559d0072a964", "parents": [ "d73782fdde76554016abf73b46f843b29f520848" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 07 12:04:35 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 18:06:01 2008 -0400" }, "message": "mac80211: remove max_antenna_gain config\n\nThe antenna gain isn\u0027t exactly configurable, despite the belief of\nsome unnamed individual who thinks that the EEPROM might influence\nit.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "3db594380b8452eda4d88b12844077809607caaa", "tree": "f50fb71136b72c6f1c547aad62c17bab7eb9222c", "parents": [ "c6a1fa12d206882757264869f8e32d606b930e2a" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Oct 07 12:04:33 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Oct 31 18:06:00 2008 -0400" }, "message": "mac80211: remove wiphy_to_hw\n\nThis isn\u0027t used by anyone, if we ever need it we can add\nit back, until then it\u0027s useless.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea2d8b59bc7b770fde03de2bb9b3ee46e8bdc8d5", "tree": "27047b27410b24f88cd8e3a84d863594e4fff98c", "parents": [ "f2c2e25554991f9c17bcd24028db5e1c50ecb0ad" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Oct 27 09:47:03 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 27 17:46:11 2008 -0400" }, "message": "mac80211.h: fix kernel-doc excesses\n\nFix mac80211.h kernel-doc: it had some extra parameters that were\nno longer valid and incorrect format for a return value in 2 places.\n\nWarning(lin2628-rc2//include/net/mac80211.h:1487): Excess function parameter or struct member \u0027control\u0027 description in \u0027ieee80211_beacon_get\u0027\nWarning(lin2628-rc2//include/net/mac80211.h:1596): Excess function parameter or struct member \u0027control\u0027 description in \u0027ieee80211_get_buffered_bc\u0027\nWarning(lin2628-rc2//include/net/mac80211.h:1632): Excess function parameter or struct member \u0027rc4key\u0027 description in \u0027ieee80211_get_tkip_key\u0027\nWarning(lin2628-rc2//include/net/mac80211.h:1735): Excess function parameter or struct member \u0027return\u0027 description in \u0027ieee80211_start_tx_ba_session\u0027\nWarning(lin2628-rc2//include/net/mac80211.h:1775): Excess function parameter or struct member \u0027return\u0027 description in \u0027ieee80211_stop_tx_ba_session\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "e1a65b5828edfddb29c6fb4eb556fa503295146b", "tree": "e144d55d363a2200ba35ce80e6a5a8581b52f9b7", "parents": [ "4233df6b748193d45f79fb7448991a473061a65d" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Mon Oct 13 09:15:01 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Oct 14 21:12:37 2008 -0400" }, "message": "mac80211: fixme for kernel-doc\n\nFix kernel-doc warnings in mac80211.h.\nFields need real explanations added to them.\n\nWarning(lin2627-g3-kdocfixes//include/net/mac80211.h:659): No description found for parameter \u0027icv_len\u0027\nWarning(lin2627-g3-kdocfixes//include/net/mac80211.h:659): No description found for parameter \u0027iv_len\u0027\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "870abdf67170daa9f1022e55a35c469239fcc74c", "tree": "5ca00db880d71149eea2cdaeb67ed20f5281071d", "parents": [ "76708dee382a69b2f9d0e50f413f99fefb2dc509" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Oct 05 18:04:24 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 06 18:14:57 2008 -0400" }, "message": "mac80211: add multi-rate retry support\n\nThis patch adjusts the rate control API to allow multi-rate retry\nif supported by the driver. The ieee80211_hw struct specifies how\nmany alternate rate selections the driver supports.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "76708dee382a69b2f9d0e50f413f99fefb2dc509", "tree": "ce1b8014520c08641423a0842d03eace38da0c4e", "parents": [ "417bd25ac4c6f76c8aafe8a584f3620f4a936b72" ], "author": { "name": "Felix Fietkau", "email": "nbd@openwrt.org", "time": "Sun Oct 05 18:02:48 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Oct 06 18:14:57 2008 -0400" }, "message": "mac80211: free up 2 bytes in skb-\u003ecb\n\nFree up 2 bytes in skb-\u003ecb to be used for multi-rate retry later.\nMove iv_len and icv_len initialization into key alloc.\n\nSigned-off-by: Felix Fietkau \u003cnbd@openwrt.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "4b7679a561e552eeda1e3567119bef2bca99b66e", "tree": "b5f2b45c9186eb954f9329322d07e277e669b422", "parents": [ "2ff6a6d4e92270283432690adf53a7e5ab186d19" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 18 18:14:18 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Wed Sep 24 16:18:03 2008 -0400" }, "message": "mac80211: clean up rate control API\n\nLong awaited, hard work. This patch totally cleans up the rate control\nAPI to remove the requirement to include internal headers outside of\nnet/mac80211/.\n\nThere\u0027s one internal use in the PID algorithm left for mesh networking,\nwe\u0027ll have to figure out a way to clean that one up and decide how to\ndo the peer link evaluation, possibly independent of the rate control\nalgorithm or via new API.\n\nAdditionally, ath9k is left using the cross-inclusion hack for now, we\nwill add new API where necessary to make this work properly, but right\nnow I\u0027m not expert enough to do it. It\u0027s still off better than before.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "25d834e16294c8dfd923dae6bdb8a055391a99a5", "tree": "b9d756464d89949651e5acd1df97846af3028df0", "parents": [ "9c31fd635ddfae6eb61712491770befa2ce1fdde" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Fri Sep 12 22:52:47 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:25 2008 -0400" }, "message": "mac80211: fix virtual interfaces vs. injection\n\nCurrently, virtual interface pointers passed to drivers might be\nfrom monitor interfaces and as such completely uninitialised\nbecause we do not tell the driver about monitor interfaces when\nthose are created. Instead of passing them, we should therefore\nindicate to the driver that there is no information; do that by\npassing a NULL value and adjust drivers to cope with it.\n\nAs a result, some mac80211 API functions also need to cope with\na NULL vif pointer so drivers can still call them unconditionally.\n\nAlso, when injecting frames we really don\u0027t want to pass NULL all\nthe time, if we know we are the source address of a frame and have\na local interface for that address, we can to use that interface.\nThis also helps with processing the frame correctly for that\ninterface which will help the 802.11w implementation. It\u0027s not\nentirely correct for VLANs or WDS interfaces because there the MAC\naddress isn\u0027t unique, but it\u0027s already a lot better than what we\ndo now.\n\nFinally, when injecting without a matching local interface, don\u0027t\nassign sequence numbers at all.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "687c7c0807371aeaa94ff2fff511eeb326b5c5de", "tree": "5f1a51d7f42dba9718ab7286768a5d3c7a4b4b34", "parents": [ "ae17e986091637e7ef5a8224c7b689029b105131" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 03:14:11 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:24 2008 -0400" }, "message": "mac80211: share sta_info-\u003eht_info\n\nRate control algorithms may need access to a station\u0027s\nHT capabilities, so share the ht_info struct in the\npublic station API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "323ce79a9cdbf838ea577677b1ddace8e0b4d4c6", "tree": "f14a67ec7927865dc1537b2c3a4fb20c0325f517", "parents": [ "b7e35008815a1c39123f4dd53b430788e2e18da4" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 02:45:11 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:24 2008 -0400" }, "message": "mac80211: share sta-\u003esupp_rates\n\nAs more preparation for a saner rate control algorithm API,\nshare the supported rates bitmap in the public API.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "17741cdc264e4d768167766a252210e201c1519a", "tree": "72c0e697af29a40c03bce002b529c3951d34a3b7", "parents": [ "8aa21e6fd703cb3fed66ac07dcbcb861f00cf6d6" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:02:02 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:23 2008 -0400" }, "message": "mac80211: share STA information with driver\n\nThis patch changes mac80211 to share some more data about\nstations with drivers. Should help iwlwifi and ath9k when\n they get around to updating, and might also help with\nimplementing rate control algorithms without internals.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nCc: Sujith Manoharan \u003cSujith.Manoharan@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "05c914fe330fa8e1cc67870dc0d3809dfd96c107", "tree": "df53bcab47335f3361c09478d6b1447b7d298536", "parents": [ "96dd22ac06b0dbfb069fdf530c72046a941e9694" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:58 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:23 2008 -0400" }, "message": "mac80211: use nl80211 interface types\n\nThere\u0027s really no reason for mac80211 to be using its\nown interface type defines. Use the nl80211 types and\nsimplify the configuration code a bit: there\u0027s no need\nto translate them any more now.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "96dd22ac06b0dbfb069fdf530c72046a941e9694", "tree": "4dbf19921a1d4add0ca03a0ff1d7db37c4ecb8be", "parents": [ "ccd7b36286f8c42b3fa95c5a8d402162ffab41df" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:57 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:22 2008 -0400" }, "message": "mac80211: inform driver of basic rateset\n\nDrivers need to know the basic rateset to be able to configure\nthe ACK/CTS programming in hardware correctly.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "5bc75728fd43bb15b46f16ef465bcf9d487393cf", "tree": "5732adee3965970390bf7953d214c757bbdba2a2", "parents": [ "b7413430d4d2a6168e68231d9f93763047b6d60c" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Sep 11 00:01:51 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:20 2008 -0400" }, "message": "mac80211: fix scan vs. interface removal race\n\nWhen we remove an interface, we can currently end up having\na pointer to it left in local-\u003escan_sdata after it has been\nset down, and then with a hardware scan the scan completion\ncan try to access it which is a bug. Alternatively, a scan\nthat started as a hardware scan may terminate as though it\nwas a software scan, if the timing is just right.\n\nOn SMP systems, software scan also has a similar problem,\njust canceling the delayed work and setting a flag isn\u0027t\nenough since it may be running concurrently; in this case\nwe would also never restore state of other interfaces.\n\nThis patch hopefully fixes the problems by always invoking\nieee80211_scan_completed or requiring it to be invoked by\nthe driver, I suspect the drivers that have -\u003ehw_scan() are\nbuggy. The bug will not manifest itself unless you remove\nthe interface while hw-scanning which will also turn off\nthe hw, and then add a new interface which will be unusable\nuntil you scan once.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b2e1b30290539b344cbaff0d9da38012e03aa347", "tree": "8d021d078c12f3d7b47da4b52a54eff4509daa98", "parents": [ "63f2c0464875b6ef2132cecb19b2a5abbf061227" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Tue Sep 09 23:19:48 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Sep 15 16:48:19 2008 -0400" }, "message": "cfg80211: Add new wireless regulatory infrastructure\n\nThis adds the new wireless regulatory infrastructure. The\nmain motiviation behind this was to centralize regulatory\ncode as each driver was implementing their own regulatory solution,\nand to replace the initial centralized code we have where:\n\n* only 3 regulatory domains are supported: US, JP and EU\n* regulatory domains can only be changed through module parameter\n* all rules were built statically in the kernel\n\nWe now have support for regulatory domains for many countries\nand regulatory domains are now queried through a userspace agent\nthrough udev allowing distributions to update regulatory rules\nwithout updating the kernel.\n\nEach driver can regulatory_hint() a regulatory domain\nbased on either their EEPROM mapped regulatory domain value to a\nrespective ISO/IEC 3166-1 country code or pass an internally built\nregulatory domain. We also add support to let the user set the\nregulatory domain through userspace in case of faulty EEPROMs to\nfurther help compliance.\n\nSupport for world roaming will be added soon for cards capable of\nthis.\n\nFor more information see:\n\nhttp://wireless.kernel.org/en/developers/Regulatory/CRDA\n\nFor now we leave an option to enable the old module parameter,\nieee80211_regdom, and to build the 3 old regdomains statically\n(US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY.\nThese old static definitions and the module parameter is being\nscheduled for removal for 2.6.29. Note that if you use this\nyou won\u0027t make use of a world regulatory domain as its pointless.\nIf you leave this option enabled and if CRDA is present and you\nuse US or JP we will try to ask CRDA to update us a regulatory\ndomain for us.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "fe3fa827314b877486c515a001c3e6f604f6f16f", "tree": "64b04c2ee021bf8428bc2f5e9370459bf0ae9459", "parents": [ "69e6c010fd5f5015d3cc64718fbe266face93770" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Mon Sep 08 11:05:09 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Thu Sep 11 15:53:34 2008 -0400" }, "message": "mac80211: make conf_tx non-atomic\n\nThe conf_tx callback currently needs to be atomic, this requirement\nis just because it can be called from scanning. This rearranges it\nslightly to only update while not scanning (which is fine, we\u0027ll be\ngetting beacons when associated) and thus removes the atomic\nrequirement.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9f1ba9062e032fb7b395cd27fc564754fe4e9867", "tree": "6610106cd769aa3cc144b7a4f1547e07eeba5c88", "parents": [ "7f93ea3e246db512c0c17b79847f57dd3a2891e1" ], "author": { "name": "Jouni Malinen", "email": "jouni.malinen@atheros.com", "time": "Thu Aug 07 20:07:01 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 29 16:23:55 2008 -0400" }, "message": "mac80211/cfg80211: Add BSS configuration options for AP mode\n\nThis change adds a new cfg80211 command, NL80211_CMD_SET_BSS, to allow\nAP mode BSS parameters to be changed from user space (e.g., hostapd).\nThe drivers using mac80211 are expected to be modified with separate\nchanges to use the new BSS info parameter for short slot time in the\nbss_info_changed() handler.\n\nSigned-off-by: Jouni Malinen \u003cjouni.malinen@atheros.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6b644e524bbd4089a28e0711de4f1cf2daa5db50", "tree": "3c3993bc52c10aa0aa570dd60c3d5b78c56a80ae", "parents": [ "b73d70ad8665fd3f35c855075b9a94de3e2b69e2" ], "author": { "name": "Harvey Harrison", "email": "harvey.harrison@gmail.com", "time": "Tue Jul 15 18:44:12 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:54 2008 -0400" }, "message": "mac80211: remove ieee80211_get_hdrlen\n\nAll users have been moved over to the version taking a le16 frame control\nrather than a cpu-endian value.\n\nSigned-off-by: Harvey Harrison \u003charvey.harrison@gmail.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "b4f28bbb9bf0b2c829ecf97ce2173f204fde4f10", "tree": "1ae74cd00a46086f7e5f31d140bf75b8793507ef", "parents": [ "63266a653589e1a237527479f10212ea77ce7844" ], "author": { "name": "Bruno Randolf", "email": "br1@einfach.org", "time": "Wed Jul 30 17:19:55 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:50 2008 -0400" }, "message": "mac80211: add rx status flag for short preamble\n\nand use it for the radiotap header\n\nSigned-off-by: Bruno Randolf \u003cbr1@einfach.org\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "92ab85354993ac3a364c65cab45745af470ffc67", "tree": "b36501661ee9093cb8e66919bbebbca4374c36d6", "parents": [ "5442060c08a49bd0b416f033e0ae43ccedef5278" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Thu Jul 24 21:02:04 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Aug 22 16:29:50 2008 -0400" }, "message": "mac80211: add ieee80211_queue_stopped)\n\nThis patch adds ieee80211_queue_stopped that let drivers to query\nqueue status\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "546c80c91f8d847477ee8354aad26f116048169d", "tree": "8e07ae6911fd017be50496394eaf5933fd79c5f9", "parents": [ "d47c3cebf5aae9d72b2cc18e5ac3b520fdbb0bca" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Thu Aug 14 11:43:20 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 18 11:05:14 2008 -0400" }, "message": "mac80211: remove kdoc references to IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE\n\nIEEE80211_HW_HOST_GEN_BEACON_TEMPLATE was made unnecessary in\nthe recent revamp on beacon configuration.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea95bba41e69c616bb1512cf59d22f33266b8568", "tree": "fe3d17351465189b041bf20c0c9f6c4835d63997", "parents": [ "98f7dfd86cbbd377e2cbc293529681b914296f68" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Fri Jul 18 13:53:00 2008 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 04 15:09:07 2008 -0400" }, "message": "mac80211: make listen_interval be limited by low level driver\n\nThis patch makes possible for a driver to specify maximal listen interval\nThe possibility for user to configure listen interval is not implemented\nyet, currently the maximum provided by the driver or 1 is used.\nMac80211 uses config handler to set listen interval for to the driver.\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "98f7dfd86cbbd377e2cbc293529681b914296f68", "tree": "cce0e06183ae4b8ce0aa845cb56cf9ca90984749", "parents": [ "298df1f62aa69881528bf0f1c3c14395bc447846" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Fri Jul 18 13:52:59 2008 +0800" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Aug 04 15:09:07 2008 -0400" }, "message": "mac80211: pass dtim_period to low level driver\n\nThis patch adds the dtim_period in ieee80211_bss_conf, this allows the low\nlevel driver to know the dtim_period, and to plan power save accordingly.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Zhu Yi \u003cyi.zhu@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "d0f09804144fd9471a13cf4d80e66842c7fa114f", "tree": "4a1f0f78bad7e5be4ad400397a19d4b8d6fbbdcd", "parents": [ "0ccd58fc03f40529f66190b1a41e92a732d2bda8" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 29 11:32:07 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 29 16:55:08 2008 -0400" }, "message": "mac80211: partially fix skb-\u003ecb use\n\nThis patch fixes mac80211 to not use the skb-\u003ecb over the queue step\nfrom virtual interfaces to the master. The patch also, for now,\ndisables aggregation because that would still require requeuing,\nwill fix that in a separate patch. There are two other places (software\nrequeue and powersaving stations) where requeue can happen, but that is\nnot currently used by any drivers/not possible to use respectively.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "605a0bd66d9d55e9ba46da1a9e5140c68bdf6d85", "tree": "f50c76d148bd0844b4ace3085e8ccaf99ca0cd71", "parents": [ "281c7413ed914623d3245299a4761b6b27ab9fdb" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Tue Jul 15 10:10:01 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 29 16:36:24 2008 -0400" }, "message": "mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag\n\nI forgot this in the previous patch that made it unused.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "51cb6db0f5654f08a4a6bfa3888dc36a51c2df3e", "tree": "b9103a34674efeca9ffa2f9ef9cec1ee9735ab9d", "parents": [ "eae792b722fef08dcf3aee88266ee7def9710757" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Tue Jul 15 03:34:57 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Thu Jul 17 19:21:12 2008 -0700" }, "message": "mac80211: Reimplement WME using -\u003eselect_queue().\n\nThe only behavior change is that we do not drop packets under any\ncircumstances. If that is absolutely needed, we could easily add it\nback.\n\nWith cleanups and help from Johannes Berg.\n\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n" }, { "commit": "f434b2d111d9ff84ebdd0f11a7ae42c761453259", "tree": "8c19b89773cb03812e81f3d170c97c31925dec36", "parents": [ "f591fa5dbbbeaebd95c9c019b3a536a327fb79de" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 10 11:22:31 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:52:57 2008 -0400" }, "message": "mac80211: fix struct ieee80211_tx_queue_params\n\nMultiple issues:\n - there are no \"default\" values needed\n - cw_min/cw_max can be larger than documented\n - restructure to decrease size\n - use get_unaligned_le16\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "f591fa5dbbbeaebd95c9c019b3a536a327fb79de", "tree": "fdede2804a4d962b072a88dbee870ba41eeb8964", "parents": [ "22bb1be4d271961846cd0889b0f8d671db773080" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Thu Jul 10 11:21:26 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:52:57 2008 -0400" }, "message": "mac80211: fix TX sequence numbers\n\nThis patch makes mac80211 assign proper sequence numbers to\nQoS-data frames. It also removes the old sequence number code\nbecause we noticed that only the driver or hardware can assign\nsequence numbers to non-QoS-data and especially management\nframes in a race-free manner because beacons aren\u0027t passed\nthrough mac80211\u0027s TX path.\n\nThis patch also adds temporary code to the rt2x00 drivers to\nnot break them completely, that code will have to be reworked\nfor proper sequence numbers on beacons.\n\nIt also moves sequence number assignment down in the TX path\nso no sequence numbers are assigned to frames that are dropped.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "9d139c810a2aa17365cc548d0cd2a189d8433c65", "tree": "ef10ca55f93689ab97368376d277102d2527c961", "parents": [ "f3947e2dfa3b18f375b7acd03b7ee2877d0751fc" ], "author": { "name": "Johannes Berg", "email": "johannes@sipsolutions.net", "time": "Wed Jul 09 14:40:37 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:30:07 2008 -0400" }, "message": "mac80211: revamp beacon configuration\n\nThis patch changes mac80211\u0027s beacon configuration handling\nto never pass skbs to the driver directly but rather always\nrequire the driver to use ieee80211_beacon_get(). Additionally,\nit introduces \"change flags\" on the config_interface() call\nto enable drivers to figure out what is changing. Finally, it\nremoves the beacon_update() driver callback in favour of\nhaving IBSS beacon delivered by ieee80211_beacon_get() as well.\n\nSigned-off-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "49292d56352a6ab90d04c3448dd8b6106dfef2d6", "tree": "d207a45ec1333831a82f2c9b2655b2a081ae889e", "parents": [ "79d16385c7f287a33ea771c4dbe60ae43f791b49" ], "author": { "name": "Samuel Ortiz", "email": "samuel@sortiz.org", "time": "Fri Jul 04 10:49:31 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jul 14 14:30:06 2008 -0400" }, "message": "mac80211: power management wext hooks\n\nThis patch implements the power management routines wireless extensions\nfor mac80211.\nFor now we only support switching PS mode between on and off.\n\nSigned-off-by: Samuel Ortiz \u003csameo@openedhand.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "6ef307bc561911c8cdda98ef3896b5982b602a43", "tree": "e9f78dc7bfe9907b68f25a68441715856b52b1f5", "parents": [ "fd4484af7c02b31bcb6090eeb0d85cf947719f2d" ], "author": { "name": "Randy Dunlap", "email": "randy.dunlap@oracle.com", "time": "Thu Jul 03 13:52:18 2008 -0700" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 08 14:16:03 2008 -0400" }, "message": "mac80211: fix lots of kernel-doc\n\nFix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation.\nFix a few typos also.\n\nNote: Some fields are marked as TBD and need to have their description\ncorrected.\n\nSigned-off-by: Randy Dunlap \u003crandy.dunlap@oracle.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "429a380571a6e6b8525b93161544eafc9b227e44", "tree": "a90ad1cba6ea557ace90a74ea02af9d5bcad36c1", "parents": [ "b2898a27809f54a33050a70d0eaa4a78194163a0" ], "author": { "name": "Ron Rindjunsky", "email": "ron.rindjunsky@intel.com", "time": "Tue Jul 01 14:16:03 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Tue Jul 08 10:21:34 2008 -0400" }, "message": "mac80211: add block ack request capability\n\nThis patch adds block ack request capability\n\nSigned-off-by: Ester Kummer \u003cester.kummer@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Ron Rindjunsky \u003cron.rindjunsky@intel.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ea2aca084ba82aaf7c148d04914ceed8758ce08a", "tree": "dcb3f4f849cf48deac2dd3bafd5c2cd2f0e7dc79", "parents": [ "f3032be921cd126615ce3bfd7084e3d319f3f892", "c5a78ac00c400df29645e59938700301efb371d0" ], "author": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 05 23:08:07 2008 -0700" }, "committer": { "name": "David S. Miller", "email": "davem@davemloft.net", "time": "Sat Jul 05 23:08:07 2008 -0700" }, "message": "Merge branch \u0027master\u0027 of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6\n\nConflicts:\n\n\tDocumentation/feature-removal-schedule.txt\n\tdrivers/net/wan/hdlc_fr.c\n\tdrivers/net/wireless/iwlwifi/iwl-4965.c\n\tdrivers/net/wireless/iwlwifi/iwl3945-base.c\n" }, { "commit": "06ff47bc9595848b818ac79e7d8069337c6e58b1", "tree": "a0a2d00f25f5c97f04dffd4c27059e1d217ea5a0", "parents": [ "7b1e78d5052a92e95d851fbb0236a712264fe7e8" ], "author": { "name": "Tomas Winkler", "email": "tomas.winkler@intel.com", "time": "Wed Jun 18 17:53:44 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 30 17:37:34 2008 -0400" }, "message": "mac80211: add spectrum capabilities\n\nThis patch add spectrum capability and required information\nelements to association request providing AP has requested it and\nit is supported by the driver\n\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: Assaf Krauss \u003cassaf.krauss@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "23976efedd5ecb420b87455787c537eb4aed1981", "tree": "902550e2716af5682de8219da1f228e13a5f0adb", "parents": [ "1bcca3c463e4930cef9986b05165bb0b3eb46f63" ], "author": { "name": "Emmanuel Grumbach", "email": "emmanuel.grumbach@intel.com", "time": "Sat Jun 28 02:50:13 2008 +0300" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Mon Jun 30 15:43:53 2008 -0400" }, "message": "mac80211: don\u0027t accept WEP keys other than WEP40 and WEP104\n\nThis patch makes mac80211 refuse a WEP key whose length is not WEP40 nor\nWEP104.\n\nSigned-off-by: Emmanuel Grumbach \u003cemmanuel.grumbach@intel.com\u003e\nSigned-off-by: Tomas Winkler \u003ctomas.winkler@intel.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "428da76523e4a9c08bdfadc25a05b520f19b9133", "tree": "4fcdffdd45b38e81f11631867aaf75db676e3b9c", "parents": [ "f37d08bddc5cb8de18e55f2b0a401b3eb6269af4" ], "author": { "name": "Ivo van Doorn", "email": "ivdoorn@gmail.com", "time": "Tue Jun 24 19:23:36 2008 +0200" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 27 09:09:20 2008 -0400" }, "message": "mac80211: Add RTNL warning for workqueue\n\nThe workqueue provided by mac80211 should not be used for\nscheduled tasks that acquire the RTNL lock. This could be done\nwhen the driver uses the function ieee80211_iterate_active_interfaces()\nwithin the scheduled work. Such behavior will end in locking\ndependencies problems when an interface is being removed.\n\nThis patch will add a notification about the RTNL locking and\nthe mac80211 workqueue to prevent driver developers from\nblindly using it.\n\nSigned-off-by: Ivo van Doorn \u003cIvDoorn@gmail.com\u003e\nAcked-by: Johannes Berg \u003cjohannes@sipsolutions.net\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" }, { "commit": "ffd7891dc909b3648e87f7cf8f84a6dc12fc1cc6", "tree": "563c41b3bce49effd3544081cb54ba5ab6fdfb15", "parents": [ "61243d8e79de67d703b192fae2c4ab80fc0fac34" ], "author": { "name": "Luis R. Rodriguez", "email": "lrodriguez@atheros.com", "time": "Sat Jun 21 10:02:46 2008 -0400" }, "committer": { "name": "John W. Linville", "email": "linville@tuxdriver.com", "time": "Fri Jun 27 09:09:17 2008 -0400" }, "message": "mac80211: Let drivers have access to TKIP key offets for TX and RX MIC\n\nSome drivers may want to to use the TKIP key offsets for TX and RX\nMIC so lets move this out. Lets also clear up a bit how this is used\ninternally in mac80211.\n\nSigned-off-by: Luis R. Rodriguez \u003clrodriguez@atheros.com\u003e\nSigned-off-by: John W. Linville \u003clinville@tuxdriver.com\u003e\n" } ], "next": "6693be7124cb8e4f15f0d80ed6e3e50678771737" }