)]}' { "log": [ { "commit": "752451f01c4567b506bf4343082682dbb8fb30dd", "tree": "ec2ec2989c93e567952ddc1ec879013aa2704f0a", "parents": [ "673ab8783b596cda5b616b317b1a1b47480c66fd", "972deb4f49b5b6703d9c6117ba0aeda2180d4447" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 18 16:51:10 2012 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Dec 18 16:51:10 2012 -0800" }, "message": "Merge branch \u0027i2c-embedded/for-next\u0027 of git://git.pengutronix.de/git/wsa/linux\n\nPull i2c-embedded changes from Wolfram Sang:\n - CBUS driver (an I2C variant)\n - continued rework of the omap driver\n - s3c2410 gets lots of fixes and gains pinctrl support\n - at91 gains DMA support\n - the GPIO muxer gains devicetree probing\n - typical fixes and additions all over\n\n* \u0027i2c-embedded/for-next\u0027 of git://git.pengutronix.de/git/wsa/linux: (45 commits)\n i2c: omap: Remove the OMAP_I2C_FLAG_RESET_REGS_POSTIDLE flag\n i2c: at91: add dma support\n i2c: at91: change struct members indentation\n i2c: at91: fix compilation warning\n i2c: mxs: Do not disable the I2C SMBus quick mode\n i2c: mxs: Handle i2c DMA failure properly\n i2c: s3c2410: Remove recently introduced performance overheads\n i2c: ocores: Move grlib set/get functions into #ifdef CONFIG_OF block\n i2c: s3c2410: Add fix for i2c suspend/resume\n i2c: s3c2410: Fix code to free gpios\n i2c: i2c-cbus-gpio: introduce driver\n i2c: ocores: Add support for the GRLIB port of the controller and use function pointers for getreg and setreg functions\n i2c: ocores: Add irq support for sparc\n i2c: omap: Move the remove constraint\n ARM: dts: cfa10049: Add the i2c muxer buses to the CFA-10049\n i2c: s3c2410: do not special case HDMIPHY stuck bus detection\n i2c: s3c2410: use exponential back off while polling for bus idle\n i2c: s3c2410: do not generate STOP for QUIRK_HDMIPHY\n i2c: s3c2410: grab adapter lock while changing i2c clock\n i2c: s3c2410: Add support for pinctrl\n ...\n" }, { "commit": "2dfea3803dcf70983d14ce1dcbb3e97a7459a28b", "tree": "59bffc7389ff554585f79d7cc06021790dc2b317", "parents": [ "aed606e3bc1f10753254db308d3fd8c053c41328", "1881b68b8961a86d40c3c5c205e533515a2dc9c6" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Dec 16 18:55:20 2012 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sun Dec 16 18:55:20 2012 -0800" }, "message": "Merge tag \u0027mfd-3.8-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\nPull MFS update from Samuel Ortiz:\n \"This is the MFD patch set for the 3.8 merge window.\n\n We have several new drivers, most of the time coming with their sub\n devices drivers:\n\n - Austria Microsystem\u0027s AS3711\n - Nano River\u0027s viperboard\n - TI\u0027s TPS80031, AM335x TS/ADC,\n - Realtek\u0027s MMC/memstick card reader\n - Nokia\u0027s retu\n\n We also got some notable cleanups and improvements:\n\n - tps6586x got converted to IRQ domains.\n - tps65910 and tps65090 moved to the regmap IRQ API.\n - STMPE is now Device Tree aware.\n - A general twl6040 and twl-core cleanup, with moves to the regmap\n I/O and IRQ APIs and a conversion to the recently added PWM\n framework.\n - sta2x11 gained regmap support.\n\n Then the rest is mostly tiny cleanups and fixes, among which we have\n Mark\u0027s wm5xxx and wm8xxx patchset.\"\n\nFar amount of annoying but largely trivial conflicts. Many due to\n__devinit/exit removal, others due to one or two of the new drivers also\nhaving come in through another tree.\n\n* tag \u0027mfd-3.8-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits)\n mfd: tps6507x: Convert to devm_kzalloc\n mfd: stmpe: Update DT support for stmpe driver\n mfd: wm5102: Add readback of DSP status 3 register\n mfd: arizona: Log if we fail to create the primary IRQ domain\n mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ\n mfd: tps80031: Add terminating entry for tps80031_id_table\n mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask()\n mfd: wm5102: Add tuning for revision B\n mfd: arizona: Defer patch initialistation until after first device boot\n mfd: tps65910: Fix wrong ack_base register\n mfd: tps65910: Remove unused data\n mfd: stmpe: Get rid of irq_invert_polarity\n mfd: ab8500-core: Fix invalid free of devm_ allocated data\n mfd: wm5102: Mark DSP memory regions as volatile\n mfd: wm5102: Correct default for LDO1_CONTROL_2\n mfd: arizona: Register haptics devices\n mfd: wm8994: Make current device behaviour the default\n mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ\n mfd: Fix stmpe.c build when OF is not enabled\n mfd: jz4740-adc: Use devm_kzalloc\n ...\n" }, { "commit": "fd62c5450324af7f6cc12897b09b77285cd48a92", "tree": "d4390981348e5a08e31a50fe9cb0da0715cf005c", "parents": [ "a2013a13e68354e0c8f3696b69701803e13fb737", "818b930bc15077fc00ff16bb22c5df1857f05afa" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 13 12:00:48 2012 -0800" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Dec 13 12:00:48 2012 -0800" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid\n\nPull HID subsystem updates from Jiri Kosina:\n\n 1) Support for HID over I2C bus has been added by Benjamin Tissoires.\n ACPI device discovery is still in the works.\n\n 2) Support for Win8 Multitiouch protocol is being added, most work done\n by Benjamin Tissoires as well\n\n 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan\n and Jiri Kosina\n\n 4) ION iCade driver added by Bastien Nocera\n\n 5) Support for a couple new Roccat devices has been added by Stefan\n Achatz\n\n 6) HID sensor hubs are now auto-detected instead of having to list all\n the VID/PID combinations in the blacklist array\n\n 7) other random fixes and support for new device IDs\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits)\n HID: i2c-hid: add mutex protecting open/close race\n Revert \"HID: sensors: add to special driver list\"\n HID: sensors: autodetect USB HID sensor hubs\n HID: hidp: fallback to input session properly if hid is blacklisted\n HID: i2c-hid: fix ret_count check\n HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches\n HID: i2c-hid: remove extra .irq field in struct i2c_hid\n HID: i2c-hid: reorder allocation/free of buffers\n HID: i2c-hid: fix memory corruption due to missing hid declaration\n HID: i2c-hid: remove superfluous include\n HID: i2c-hid: remove unneeded test in i2c_hid_remove\n HID: i2c-hid: i2c_hid_get_report may fail\n HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove\n HID: i2c-hid: fix error messages\n HID: i2c-hid: fix return paths\n HID: i2c-hid: remove unused static declarations\n HID: i2c-hid: fix i2c_hid_dbg macro\n HID: i2c-hid: fix checkpatch.pl warning\n HID: i2c-hid: enhance Kconfig\n HID: i2c-hid: change I2C name\n ...\n" }, { "commit": "805f864ebefc39065b6b0cf2548f13c2fbf888d9", "tree": "08250172d9e0685eea2f1d728a0f4a236acb88bd", "parents": [ "86605cfe8c7c166999bc7476b17940c68bf2f8b7" ], "author": { "name": "Kuninori Morimoto", "email": "kuninori.morimoto.gx@renesas.com", "time": "Thu Dec 06 01:10:28 2012 -0800" }, "committer": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Fri Dec 07 09:16:12 2012 +0100" }, "message": "gpio: pcf857x: use client-\u003eirq for gpio_to_irq()\n\n6e20a0a429bd4dc07d6de16d9c247270e04e4aa0\n(gpio: pcf857x: enable gpio_to_irq() support)\nadded gpio_to_irq() support on pcf857x driver,\nbut it used pdata-\u003eirq.\nThis patch modifies driver to use client-\u003eirq instead of it.\nIt modifies kzm9g board platform settings,\nand device probe information too.\nThis patch is tested on kzm9g board\n\nReported-by: Christian Engelmayer \u003cchristian.engelmayer@frequentis.com\u003e\nAcked-by: Simon Horman \u003chorms+renesas@verge.net.au\u003e\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n" }, { "commit": "04575d5a3dc15d762c7428d2745d30b2d448e443", "tree": "83e93e3c4cb2367c7d85e93e5cf76ee26b18f790", "parents": [ "da059ecfc9f9d98556607c6d6db065aa3b7f162d" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Nov 13 09:28:49 2012 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Nov 21 16:08:03 2012 +0100" }, "message": "mfd: twl: Use decimal numbers for TWL6030_MODULE_IDs\n\nIt is easier fro humans to understand decimal numbers than hexadecimals when\nthey are used as indexes.\n\nAcked-by: Tero Kristo \u003ct-kristo@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "da059ecfc9f9d98556607c6d6db065aa3b7f162d", "tree": "1378a6df2584381951a41bd3da14165c33699668", "parents": [ "0e8f1398a388bbaa5ca965711b9ed5ac4794332d" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Nov 13 09:28:48 2012 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Nov 21 16:08:02 2012 +0100" }, "message": "mfd: twl: Convert module id definitions to enums\n\nUse enum list for the module definitions (TWL4030_MODULE_*) which will ease\nup future work with the IDs.\nAt the same time group the IDs in block of five so it is easier to find the\nID we are looking for (to count the number they stand for).\n\nAt the same time define TWL_MODULE_LED so client drivers can switch to use\nit as soon as it is possible.\n\nAcked-by: Tero Kristo \u003ct-kristo@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "0e8f1398a388bbaa5ca965711b9ed5ac4794332d", "tree": "2af210ea6f057f42203f1453c9060582539097be", "parents": [ "2d86ad37ece5fd064aa7c4fba5dd4378679c2cbf" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Nov 13 09:28:47 2012 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Nov 21 16:08:01 2012 +0100" }, "message": "mfd: twl: Remove unused TWL_MODULE definitions\n\nAUDIO and MADC only available on twl4030 series and the TWL_MODULE_* mapping\nis not needed.\n\nAcked-by: Tero Kristo \u003ct-kristo@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "4a200c3b9a40242652b5734630bdd0bcf3aca75f", "tree": "777d9c0c9ebfb50bce882ff17a211b7b28aca618", "parents": [ "1a1e8c6fada5f6dc48aa5dad453c9d9ebfdc8218" ], "author": { "name": "Benjamin Tissoires", "email": "benjamin.tissoires@gmail.com", "time": "Mon Nov 12 15:42:59 2012 +0100" }, "committer": { "name": "Jiri Kosina", "email": "jkosina@suse.cz", "time": "Mon Nov 19 11:04:38 2012 +0100" }, "message": "HID: i2c-hid: introduce HID over i2c specification implementation\n\nMicrosoft published the protocol specification of HID over i2c:\nhttp://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx\n\nThis patch introduces an implementation of this protocol.\n\nThis implementation does not includes the ACPI part of the specification.\nThis will come when ACPI 5.0 devices enumeration will be available.\n\nOnce the ACPI part is done, OEM will not have to declare HID over I2C\ndevices in their platform specific driver.\n\nSigned-off-by: Benjamin Tissoires \u003cbenjamin.tissoires@gmail.com\u003e\nSigned-off-by: Jiri Kosina \u003cjkosina@suse.cz\u003e\n" }, { "commit": "ebd5ac165f2aaefb767c53112c2010b0ff3df688", "tree": "61ae10e5e50c38483e3c86b183c7cdcd19cc0c96", "parents": [ "23a612916a51cc3772ff46c9dc34a86c9c50840e" ], "author": { "name": "Shinya Kuribayashi", "email": "shinya.kuribayashi.px@renesas.com", "time": "Wed Oct 24 19:58:10 2012 +0900" }, "committer": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Fri Nov 16 09:09:12 2012 +0100" }, "message": "i2c: i2c-sh_mobile: support I2C hardware block with a faster operating clock\n\nOn newer SH-/R-Mobile SoCs, a clock supply to the I2C hardware block,\nwhich is used to generate the SCL clock output, is getting faster than\nbefore, while on the other hand, the SCL clock control registers, ICCH\nand ICCL, stay unchanged in 9-bit-wide (8+1).\n\nOn such silicons, the internal SCL clock counter gets incremented every\n2 clocks of the operating clock.\n\nThis patch makes it configurable through platform data.\n\nSigned-off-by: Shinya Kuribayashi \u003cshinya.kuribayashi.px@renesas.com\u003e\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\n" }, { "commit": "12250d843e8489ee00b5b7726da855e51694e792", "tree": "905d1577a3d91cf9906628dd65648b0006c1893f", "parents": [ "da06a8d7bed2f3bfc12979384b2d1247ec4873db", "62885f59a26195d9f6a3f8c795225dfbab62a110" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 11 10:27:51 2012 +0900" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Oct 11 10:27:51 2012 +0900" }, "message": "Merge branch \u0027i2c-embedded/for-next\u0027 of git://git.pengutronix.de/git/wsa/linux\n\nPull i2c-embedded changes from Wolfram Sang:\n \"The changes for i2c-embedded include:\n\n - massive rework of the omap driver\n - massive rework of the at91 driver. In fact, the old driver gets\n removed; I am okay with this approach since the old driver was\n depending on BROKEN and its limitations made it practically\n unusable, so people used bitbanging instead. But even if there are\n users, there is no platform_data or module parameter which would\n need to be converted. It is just another driver doing I2C\n transfers, just way better. Modifications of arch/arm/at91 related\n files have proper acks from the maintainer.\n - new driver for R-Car I2C\n - devicetree and generic_clock conversions and fixes\n - usual driver fixes and changes.\n\n The rework patches have come a long way and lots of people have been\n involved in creating/testing them. Most patches have been in\n linux-next at least since 3.6-rc5. A few have been added in the last\n week, I have to admit.\n\n An unexpected (but welcome :)) peak in private life is the cause for\n that. The \"late\" patches shouldn\u0027t cause any merge conflicts and I\n will have a special eye on them during the stabilization phase. This\n is an exception and I want to have the patches in place properly in\n time again for the next kernels.\"\n\n* \u0027i2c-embedded/for-next\u0027 of git://git.pengutronix.de/git/wsa/linux: (44 commits)\n MXS: Implement DMA support into mxs-i2c\n i2c: add Renesas R-Car I2C driver\n i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare\n ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints\n i2c: nomadik: Add Device Tree support to the Nomadik I2C driver\n i2c: algo: pca: Fix chip reset function for PCA9665\n i2c: mpc: Wait for STOP to hit the bus\n i2c: davinci: preparation for switch to common clock framework\n omap-i2c: fix incorrect log message when using a device tree\n i2c: omap: sanitize exit path\n i2c: omap: switch over to autosuspend API\n i2c: omap: remove unnecessary pm_runtime_suspended check\n i2c: omap: switch to threaded IRQ support\n i2c: omap: remove redundant status read\n i2c: omap: get rid of the \"complete\" label\n i2c: omap: resize fifos before each message\n i2c: omap: simplify IRQ exit path\n i2c: omap: always return IRQ_HANDLED\n i2c: omap: simplify errata check\n i2c: omap: bus: add a receiver flag\n ...\n" }, { "commit": "f5a246eab9a268f51ba8189ea5b098a1bfff200e", "tree": "a6ff7169e0bcaca498d9aec8b0624de1b74eaecb", "parents": [ "d5bbd43d5f450c3fca058f5b85f3dfb4e8cc88c9", "7ff34ad80b7080fafaac8efa9ef0061708eddd51" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 09 07:07:14 2012 +0900" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 09 07:07:14 2012 +0900" }, "message": "Merge tag \u0027sound-3.7\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound\n\nPull sound updates from Takashi Iwai:\n \"This contains pretty many small commits covering fairly large range of\n files in sound/ directory. Partly because of additional API support\n and partly because of constantly developed ASoC and ARM stuff.\n\n Some highlights:\n\n - Introduced the helper function and documentation for exposing the\n channel map via control API, as discussed in Plumbers; most of PCI\n drivers are covered, will follow more drivers later\n\n - Most of drivers have been replaced with the new PM callbacks (if\n the bus is supported)\n\n - HD-audio controller got the support of runtime PM and the support\n of D3 clock-stop. Also changing the power_save option in sysfs\n kicks off immediately to enable / disable the power-save mode.\n\n - Another significant code change in HD-audio is the rewrite of\n firmware loading code. Other than that, most of changes in\n HD-audio are continued cleanups and standardization for the generic\n auto parser and bug fixes (HBR, device-specific fixups), in\n addition to the support of channel-map API.\n\n - Addition of ASoC bindings for the compressed API, used by the\n mid-x86 drivers.\n\n - Lots of cleanups and API refreshes for ASoC codec drivers and\n DaVinci.\n\n - Conversion of OMAP to dmaengine.\n\n - New machine driver for Wolfson Microelectronics Bells.\n\n - New CODEC driver for Wolfson Microelectronics WM0010.\n\n - Enhancements to the ux500 and wm2000 drivers\n\n - A new driver for DA9055 and the support for regulator bypass mode.\"\n\nFix up various arm soc header file reorg conflicts.\n\n* tag \u0027sound-3.7\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)\n ALSA: hda - Add new codec ALC283 ALC290 support\n ALSA: hda - avoid unneccesary indices on \"Headphone Jack\" controls\n ALSA: hda - fix indices on boost volume on Conexant\n ALSA: aloop - add locking to timer access\n ALSA: hda - Fix hang caused by race during suspend.\n sound: Remove unnecessary semicolon\n ALSA: hda/realtek - Fix detection of ALC271X codec\n ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310\n ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event\n ALSA: hda - make a generic unsol event handler\n ASoC: codecs: Add DA9055 codec driver\n ASoC: eukrea-tlv320: Convert it to platform driver\n ALSA: ASoC: add DT bindings for CS4271\n ASoC: wm_hubs: Ensure volume updates are handled during class W startup\n ASoC: wm5110: Adding missing volume update bits\n ASoC: wm5110: Add OUT3R support\n ASoC: wm5110: Add AEC loopback support\n ASoC: wm5110: Rename EPOUT to HPOUT3\n ASoC: arizona: Add more clock rates\n ASoC: arizona: Add more DSP options for mixer input muxes\n ...\n" }, { "commit": "6ccbe607132bd823abbad8d32b13af89161707da", "tree": "a864577b1942c638afc904107e9d47629d800cc6", "parents": [ "d3b64c59341ac88b37a4474f8dee86b0d37accca" ], "author": { "name": "Kuninori Morimoto", "email": "kuninori.morimoto.gx@renesas.com", "time": "Thu Sep 27 23:44:25 2012 -0700" }, "committer": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Mon Oct 08 12:46:25 2012 +0200" }, "message": "i2c: add Renesas R-Car I2C driver\n\nR-Car I2C is similar with SH7760 I2C.\nBut the SH7760 I2C driver had many workaround operations, since H/W had bugs.\nThus, it was pointless to keep compatible between SH7760 and R-Car I2C drivers.\nThis patch creates new Renesas R-Car I2C driver.\n\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Wolfram Sang \u003cw.sang@pengutronix.de\u003e\n" }, { "commit": "eee543e8248150e8fb833943c71f40c7b1724600", "tree": "56efec8384b2bca4cf926583b52a7cf6136fa76f", "parents": [ "5f3d2f2e1a63679cf1c4a4210f2f1cc2f335bef6" ], "author": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Fri Oct 05 22:23:51 2012 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Fri Oct 05 22:23:51 2012 +0200" }, "message": "i2c-mux: Add support for device auto-detection\n\nLet I2C bus segments behind multiplexers have a class. This allows for\ndevice auto-detection on these segments. As long as parent segments\ndon\u0027t share the same class, it should be fine.\n\nI implemented support in drivers i2c-mux-gpio and i2c-mux-pca954x. I\nleft i2c-mux-pca9541 and i2c-mux-pinctrl alone for the moment as I\ndon\u0027t know if this feature makes sense for the use cases of these\ndrivers.\n\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nCc: Peter Korsgaard \u003cpeter.korsgaard@barco.com\u003e\nCc: David Daney \u003cdavid.daney@cavium.com\u003e\nCc: Michael Lawnick \u003cml.lawnick@gmx.de\u003e\nCc: Rodolfo Giometti \u003cgiometti@linux.it\u003e\n" }, { "commit": "578f1ef91aa92beb571bfb9af8f4d18f405f3b9e", "tree": "8ff59e772d09180b7e7f952a8c90a1bcf25e1d19", "parents": [ "ecefbd94b834fa32559d854646d777c56749ef1c", "74d8378159de16a0a1d1975d4778120d263d6000" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 05 12:01:30 2012 +0900" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Oct 05 12:01:30 2012 +0900" }, "message": "Merge tag \u0027mfd-3.7-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\nPull MFD changes from Samuel Ortiz:\n \"MFD bits for the 3.7 merge window.\n\n As usual we have a few new drivers:\n\n - TI LP8788\n - TI OMAP USB TLL\n - Maxim MAX8907\n - SMSC ECE1099\n - Dialog Semiconductor DA9055\n - A simpler syscon driver that allow us to get rid of the anatop one.\n\n Drivers are also gradually getting Device Tree and IRQ domain support.\n\n The following drivers got DT support:\n - palmas, 88pm860x, tc3589x and twl4030-audio\n\n And those ones now use the IRQ domain APIs:\n - 88pm860x, tc3589x, db8500_prcmu\n\n Also some other interesting changes:\n - Intel\u0027s ICH LPC now supports Lynx Point\n - TI\u0027s twl4030-audio added a GPO child\n - tps6527 enabled its backlight subdevice\n - The twl6030 pwm driver moved to the new PWM subsystem\n\n And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,\n palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family.\"\n\nFix up various annoying conflicts: the DT and IRQ domain support came in\ntwice and was already in 3.6. And then it was apparently rebased.\n\nGuys, DON\u0027T REBASE!\n\n* tag \u0027mfd-3.7-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)\n ARM: dts: Enable 88pm860x pmic\n mfd: 88pm860x: Move gpadc init into touch\n mfd: 88pm860x: Device tree support\n mfd: 88pm860x: Use irqdomain\n mfd: smsc: Add support for smsc gpio io/keypad driver\n backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe\n mfd: DA9055 core driver\n mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list\n mfd: wm5110: Add register patches for revision B\n mfd: wm5110: Disable control interface error report for WM5110 rev B\n mfd: max8907: Remove regulator-compatible from DT docs\n backlight: Add TPS65217 WLED driver\n mfd: Add backlight as subdevice to the tps65217\n mfd: Provide the PRCMU with its own IRQ domain\n mfd: Fix max8907 sparse warning\n mfd: Add lp8788 mfd driver\n mfd: dbx500: Provide a more accurate smp_twd clock\n mfd: rc5t583: Fix warning messages\n regulator: palmas: Add DT support\n mfd: palmas: Change regulator defns to better suite DT\n ...\n" }, { "commit": "dff8360a4a079692e65e55fbaa6c5dc605528403", "tree": "0ab8ef7595cdfb918b3fd9a8364c6ea6c9c2798f", "parents": [ "916082b073ebb7f4e064cebce0768e34cacde508", "901acf5b2910434501c221a363bb3486b647b5c4" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 02 16:05:10 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 02 16:05:10 2012 -0700" }, "message": "Merge tag \u0027gpio-for-v3.7\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio\n\nPull GPIO changes from Linus Walleij:\n \"So this is the LW GPIO patch stack for v3.7:\n - refactoring from Thierry Redding at Arnd Bergmann\u0027s request to use\n the seq_file iterator interface in gpiolib.\n - A new driver for Avionic Design\u0027s N-bit GPIO expander.\n - Two instances of mutexes replaced by spinlocks from Axel Lin to\n code that is supposed to be fastpath compliant.\n - IRQ demuxer and gpio_to_irq() support for pcf857x by Kuninori\n Morimoto.\n - Dynamic GPIO numbers, device tree support, daisy chaining and some\n other fixes for the 74x164 driver by Maxime Ripard.\n - IRQ domain and device tree support for the tc3589x driver by Lee\n Jones.\n - Some conversion to use managed resources devm_* code.\n - Some instances of clk_prepare() or clk_prepare_enable() added to\n support the new, stricter common clock framework.\n - Some for_each_set_bit() simplifications.\n - Then a lot of fixes as we fixed up all of the above tripping over\n our own shoelaces and that kind of thing.\"\n\n* tag \u0027gpio-for-v3.7\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (34 commits)\n gpio: pcf857x: select IRQ_DOMAIN\n gpio: Document device_node\u0027s det_debounce\n gpio-lpc32xx: Add GPI_28\n gpio: adnp: dt: Reference generic interrupt binding\n gpio: Add Avionic Design N-bit GPIO expander support\n gpio: pxa: using for_each_set_bit to simplify the code\n gpio_msm: using for_each_set_bit to simplify the code\n gpio: Enable the tc3298x GPIO expander driver for Device Tree\n gpio: Provide the tc3589x GPIO expander driver with an IRQ domain\n ARM: shmobile: kzm9g: use gpio-keys instead of gpio-keys-polled\n gpio: pcf857x: fixup smatch WARNING\n gpio: 74x164: Add support for the daisy-chaining\n gpio: 74x164: dts: Add documentation for the dt binding\n dt: Fix incorrect reference in gpio-led documentation\n gpio: 74x164: Add device tree support\n gpio: 74x164: Use dynamic gpio number assignment if no pdata is present\n gpio: 74x164: Use devm_kzalloc\n gpio: 74x164: Use module_spi_driver boiler plate function\n gpio: sx150x: Use irq_data_get_irq_chip_data() at appropriate places\n gpio: em: Use irq_data_get_irq_chip_data() at appropriate places\n ...\n" }, { "commit": "d0b3847b40f8da4b90b22db0f3678ba68bcd1b4e", "tree": "a648b417091d2b0a17cc915fdd7f261e5832def6", "parents": [ "eb775d38e0ff4a83d7fd020a7b147bb61b1e4006" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Sep 10 13:46:29 2012 +0300" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sat Sep 22 11:18:26 2012 -0400" }, "message": "ASoC/mfd: twl4030: Remove set_hs_extmute callback from platform data\n\nWe no longer have users for the set_hs_extmute callback which has been\nreplaced by hs_extmute_gpio so the codec driver can handle the external\nmute if it is needed by the board.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "281ecd1611654cdcdec0ffcb55e8f285b8199727", "tree": "840f6d17d56fc02f2f19d36e775f5d8197360a1f", "parents": [ "79026219588a8102a831ec682e11696fee35797d" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Sep 10 13:46:27 2012 +0300" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sat Sep 22 11:18:24 2012 -0400" }, "message": "ASoC: twl4030: Move hs_extmute GPIO handling to driver\n\nThe external mute (if it is in use) is handled by a GPIO line. Prepare to\nremove the set_hs_extmute callback and replace it with:\nhs_extmute_gpio: the GPIO number to use for external mute\n\nWhen the users of set_hs_extmute has been converted the callback can be removed.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "4cd7a2f1aedb2008004e110d31ce831895139fa0", "tree": "7cd5b469ae2cd1799dc5c745d78b16b305de7ae9", "parents": [ "b5d5a034dec62c456a48d6977d926236ec605015" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Sep 10 13:46:22 2012 +0300" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sat Sep 22 11:14:50 2012 -0400" }, "message": "mfd: twl-core: Add API to query the HFCLK rate\n\nCFG_BOOT register\u0027s HFCLK_FREQ field hold information about the used HFCLK\nfrequency.\nAdd possibility for users to get the configured rate based on this\nregister.\nThis register was configured during boot, without it the chip would not\noperate correctly, so we can trust on this information.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "2275c544cb824b469a386e411cbcaa01a19d4f55", "tree": "3bc3a273d49bc2b21613721c8e8d91dd54f6db58", "parents": [ "cdf4b67099ee8e038178a9e7d83c1aa16618c1ca" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Sep 10 13:46:22 2012 +0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Tue Sep 18 15:44:39 2012 +0200" }, "message": "mfd: twl-core: Add API to query the HFCLK rate\n\nCFG_BOOT register\u0027s HFCLK_FREQ field hold information about the used HFCLK\nfrequency.\nAdd possibility for users to get the configured rate based on this\nregister.\nThis register was configured during boot, without it the chip would not\noperate correctly, so we can trust on this information.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a940d9a1cb2ea0833421fd57e47f8ce2a6d9953b", "tree": "3d63abb69913246bb8805a1b8b313668e648e943", "parents": [ "714df7b8abafa8de4830412cc88fd9415d9bb86a" ], "author": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Tue Sep 04 17:43:30 2012 -0700" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Sep 12 18:06:30 2012 -0700" }, "message": "ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end\n\nWe can\u0027t use hardcoded interrupts for SPARSE_IRQ, and can replace\nthe hardcoded gpio_base with twl_gpiochip.base after it\u0027s been\nallocated.\n\nCc: Grant Likely \u003cgrant.likely@secretlab.ca\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "6e20a0a429bd4dc07d6de16d9c247270e04e4aa0", "tree": "15bbafa3dbcfedbe29a71f287e075932108c447e", "parents": [ "7cb6580c0b2690e5c6ac1acd9375fa55d72af289" ], "author": { "name": "Kuninori Morimoto", "email": "kuninori.morimoto.gx@renesas.com", "time": "Thu Jun 14 19:40:41 2012 -0700" }, "committer": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Thu Aug 23 23:41:17 2012 +0200" }, "message": "gpio: pcf857x: enable gpio_to_irq() support\n\npcf857x chip has some pins, but interrupt pin is only 1 pin.\nAnd gpiolib requests 1 interrupt per 1 gpio pin.\n\nThus, this patch added demuxed irq to pcf857x driver,\nand enabled gpio_to_irq().\n\nSigned-off-by: Kuninori Morimoto \u003ckuninori.morimoto.gx@renesas.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n" }, { "commit": "4b24ff71108164e047cf2c95990b77651163e315", "tree": "4b478906379adf22ff259fc1f2cce0da796df415", "parents": [ "bca1a5c0eabe0f17081760c61e8d08e73dd6b6a6", "4b1bf5871f7d59de6484cc887e205d6d2f1e6fbd" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 31 18:08:25 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Jul 31 18:08:25 2012 -0700" }, "message": "Merge tag \u0027for-v3.6\u0027 of git://git.infradead.org/battery-2.6\n\nPull battery updates from Anton Vorontsov:\n \"The tag contains just a few battery-related changes for v3.6. It\u0027s is\n all pretty straightforward, except one thing.\n\n One of our patches added thermal support for power supply class, but\n thermal/ subsystem changed under our feet. We (well, Stephen, that\n is) caught the issue and it was decided[1] that I\u0027d just delay the\n battery pull request, and then will fix it up by merging upstream back\n into battery tree at the specific commit.\n\n That\u0027s not all though: another[2] small fixup for thermal subsystem\n was needed to get rid of a warning in power supply subsystem (the\n warning was not drivers/power\u0027s \"fault\", the thermal registration\n function just needed a proper const annotation, which is also done by\n a small commit on top of the merge.\n\n So, to sum this up:\n - The \u0027master\u0027 branch of the battery tree was in the -next tree for\n weeks, was never rebased, altered etc. It should be all OK;\n - Although, for-v3.6 tag contains the \u0027master\u0027 branch + merge + the\n warning fix.\n\n [1] http://lkml.org/lkml/2012/6/19/23\n [2] http://lkml.org/lkml/2012/6/18/28\"\n\n* tag \u0027for-v3.6\u0027 of git://git.infradead.org/battery-2.6: (23 commits)\n thermal: Constify \u0027type\u0027 argument for the registration routine\n olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries\n olpc-battery: Add VOLTAGE_MAX_DESIGN property\n charger-manager: Fix build break related to EXTCON\n lp8727_charger: Move header file into platform_data directory\n power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT\n bq27x00_battery: Add support for BQ27425 chip\n charger-manager: Set current limit of regulator for over current protection\n charger-manager: Use EXTCON Subsystem to detect charger cables for charging\n test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties\n test_power: Add support for USB AC source\n gpio-charger: Use cansleep version of gpio_set_value\n bq27x00_battery: Add support for power average and health properties\n sbs-battery: Don\u0027t trigger false supply_changed event\n twl4030_charger: Allow charger to control the regulator that feeds it\n twl4030_charger: Add backup-battery charging\n twl4030_charger: Fix some typos\n max17042_battery: Support CHARGE_COUNTER power supply attribute\n smb347-charger: Add constant charge and current properties\n power_supply: Add constant charge_current and charge_voltage properties\n ...\n" }, { "commit": "f948ad0787de7b393c325803014fd7d5f1b501b1", "tree": "d5ac20ec61151809b8e365a137099a3f93562692", "parents": [ "608adca52305e4d14ca5978f9c62698ca45d3f42", "4fbb0022cba37eef4a263183fdb7dbee89b299f2" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 26 13:56:38 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 26 13:56:38 2012 -0700" }, "message": "Merge tag \u0027gpio-for-v3.6\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio\n\nPull GPIO changes from Linus Walleij:\n - New driver for AMD-8111 southbridge GPIOs\n - New driver for Wolfson Micro Arizona devices\n - Propagate device tree parse errors\n - Probe deferral finalizations - all expected calls to GPIO will now\n hopefully request deferral where apropriate\n - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP\n and PCA953X drivers.\n\nFix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c\n\n* tag \u0027gpio-for-v3.6\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:\n gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available\n gpiolib: Defer failed gpio requests by default\n MAINTAINERS: add entry OMAP GPIO driver\n gpio/pca953x: increase variables size to support 24 bit of data\n GPIO: PCA953X: Increase size of invert variable to support 24 bit\n gpio/omap: move bank-\u003edbck initialization to omap_gpio_mod_init()\n gpio/mxc: use the edge_sel feature if available\n gpio: propagate of_parse_phandle_with_args errors\n gpio: samsung: add flags specifier to device-tree binding\n gpiolib: Add support for Wolfson Microelectronics Arizona class devices\n gpio: gpio-lpc32xx: Add gpio_to_irq mapping\n gpio: pcf857x: share 8/16 bit access functions\n gpio: LPC32xx: Driver cleanup\n MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry\n gpiolib: wm8994: Convert to devm_kzalloc()\n gpiolib: wm8994: Use irq_domain mappings for gpios\n gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips\n gpio/tca6424: merge I2C transactions, remove cast\n gpio/of: fix a typo of comment message\n" }, { "commit": "945c40c6b007eb4b07374a38ea37b2a34da306b1", "tree": "09d36ed7d59cd7d63162de84671761366939450b", "parents": [ "0082c16e3a6d87c7b156ccf21f5e6c448b102809", "314820c9e892d8f41ba4db300ec96770d9c8294b" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 26 12:59:53 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Jul 26 12:59:53 2012 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\nPull input layer updates from Dmitry Torokhov:\n \"First set of updates for the input subsystem. You will get a new\n touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx\n SoC, large update to Atmel mXT touchscreen driver, a lot of drivers\n acquired device tree support and a slew of other fixes.\"\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)\n Input: add MELFAS mms114 touchscreen driver\n Input: add support for key scan interface of the LPC32xx SoC\n Input: omap4-keypad - add device tree support\n Input: hanwang - add support for Art Master II tablet\n Input: spear_keyboard - reconfigure operating frequency on suspend\n Input: spear_keyboard - fix clock handling during suspend/resume\n Input: ff-memless - fix a couple min_t() casts\n Input: synaptics - print firmware ID and board number at init\n Input: spear_keyboard - generalize keyboard frequency configuration\n Input: spear_keyboard - rename bit definitions to reflect register\n Input: spear_keyboard - use correct io accessors\n Input: spear-keyboard - fix disable device_init_wakeup in remove\n Input: wacom_i2c - fix compiler warning\n Input: imx_keypad - check error returned by clk_prepare_enable()\n Input: imx_keypad - adapt the new kpp clock name\n Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()\n Input: ad7879 - add option to correct xy axis\n Input: synaptics_usb - Remove TrackPoint name trailing whitespace\n Revert \"Input: atmel_mxt_ts - warn if sysfs could not be created\"\n Input: MT - Include win8 support\n ...\n" }, { "commit": "07b8481d4aff73d6f451f25e74ea10240ff5131e", "tree": "3b69fbd4bc82b4741e14f484e76a796ced7f2429", "parents": [ "69690bec400e4c6cc89ef37376da1e633e14ad0f" ], "author": { "name": "Joonyoung Shim", "email": "jy0922.shim@samsung.com", "time": "Fri Jul 13 00:25:45 2012 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue Jul 17 23:16:17 2012 -0700" }, "message": "Input: add MELFAS mms114 touchscreen driver\n\nThis is a initial driver for new touchscreen chip mms114 of MELFAS.\nIt uses I2C interface and supports 10 multi touch.\n\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\n" }, { "commit": "6a7b36aa4b0afbe7a9798feac16de47ad856f358", "tree": "ce7f451864f44cbd4d8896f7ca8d478f07b8d249", "parents": [ "346720130aa49e1b711c0900e98fd12f4de972b0" ], "author": { "name": "Chandrabhanu Mahapatra", "email": "cmahapatra@ti.com", "time": "Tue Jul 10 19:05:37 2012 +0530" }, "committer": { "name": "Linus Walleij", "email": "linus.walleij@linaro.org", "time": "Tue Jul 17 21:00:18 2012 +0200" }, "message": "GPIO: PCA953X: Increase size of invert variable to support 24 bit\n\nTCA6424 is a low voltage 24 bit I2C and SMBus I/O expander of pca953x family\nsimilar to its 16 bit predecessor TCA6416. It comes with three 8-bit active\nInput, Output, Polarity Inversion and Configuration registers each. The polarity\nof Input ports can be reversed by setting the appropiate bit in Polarity\nInversion registers.\n\nThe variables corresponding to Input, Output and Configuration registers have\nalready been updated to support 24 bit values. This patch thus updates the\ninvert variable of PCA953X platform data to support 24 bit.\n\nSigned-off-by: Chandrabhanu Mahapatra \u003ccmahapatra@ti.com\u003e\nSigned-off-by: Linus Walleij \u003clinus.walleij@linaro.org\u003e\n" }, { "commit": "210d4bc8a3128e3e61ac3bf4657114f8e6450e2a", "tree": "456c27828d2d3f4e76539736a0d53165932d7cd2", "parents": [ "9c645d2f887bd92df487b2c5dcd44d5fc0e7c761" ], "author": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Wed May 09 07:40:40 2012 +1000" }, "committer": { "name": "Anton Vorontsov", "email": "cbouatmailru@gmail.com", "time": "Tue Jun 19 19:12:53 2012 -0700" }, "message": "twl4030_charger: Add backup-battery charging\n\nThis allows a voltage and current (bb_uvolts and bb_uamps) to be\nspecified in the platform_data, and charging of the backup battery will\nbe enabled with those specification.\n\nAs it is not possible to monitor the backup battery at all there is no\nnew device created to represent it.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nSigned-off-by: Anton Vorontsov \u003ccbouatmailru@gmail.com\u003e\n" }, { "commit": "3e7b706ca5151849e4ca91f7f3d8d6d8d8f7b667", "tree": "14744c525e8f52376faf474d1530a0da93780ee9", "parents": [ "a844a197f136ea4cffe050890dd25a35a4d26a42" ], "author": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Wed Mar 14 15:34:17 2012 -0700" }, "committer": { "name": "Kevin Hilman", "email": "khilman@ti.com", "time": "Tue Jun 19 15:24:34 2012 -0700" }, "message": "mfd: twl: remove pdata-\u003eirq_base/_end, no more users\n\nAfter converstion to SPARSE_IRQ, the driver doesn\u0027t use the\npdata-\u003eirq_base/irq_end fields anymore. The last users\nhave been cleanup up, and now these fields can be removed.\n\nCc: Benoit Cousson \u003cb-cousson@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Kevin Hilman \u003ckhilman@ti.com\u003e\n" }, { "commit": "2c01e7bc46f10e9190818437e564f7e0db875ae9", "tree": "8b06c85d69754f7df27f7fb42520f6e2ceaea907", "parents": [ "ab11ca34eea8fda7a1a9302d86f6ef6108ffd68f", "e644dae645e167d154c0526358940986682a72b0" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 24 10:34:29 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu May 24 10:34:29 2012 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\nPull input layer updates from Dmitry Torokhov:\n - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics\n Navpoint, LM8333 keypads, Wacom I2C touhscreen);\n - updates to existing touchpad drivers (ALPS, Sntelic);\n - Wacom driver now supports Intuos5;\n - device-tree bindings in numerous drivers;\n - other cleanups and fixes.\n\nFix annoying conflict in drivers/input/tablet/wacom_wac.c that I think\nimplies that the input layer device naming is broken, but let\u0027s see. I\nbrough it up with Dmitry.\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)\n Input: matrix-keymap - fix building keymaps\n Input: spear-keyboard - document DT bindings\n Input: spear-keyboard - add device tree bindings\n Input: matrix-keymap - wire up device tree support\n Input: matrix-keymap - uninline and prepare for device tree support\n Input: adp5588 - add support for gpio names\n Input: omap-keypad - dynamically handle register offsets\n Input: synaptics - fix compile warning\n MAINTAINERS: adjust input-related patterns\n Input: ALPS - switch to using input_mt_report_finger_count\n Input: ALPS - add semi-MT support for v4 protocol\n Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver\n Input: atmel_mxt_ts - dump each message on just 1 line\n Input: atmel_mxt_ts - do not read extra (checksum) byte\n Input: atmel_mxt_ts - verify object size in mxt_write_object\n Input: atmel_mxt_ts - only allow root to update firmware\n Input: atmel_mxt_ts - use CONFIG_PM_SLEEP\n Input: sentelic - report device\u0027s production serial number\n Input: tl6040-vibra - Device Tree support\n Input: evdev - properly handle read/write with count 0\n ...\n" }, { "commit": "5949a7e9ab2db04edaeee7c368eb4c99131f4629", "tree": "13e8da5dc42cc62b9721659c41045d2c27c31cc3", "parents": [ "178e43aef2979525d7864daefd9499614e13800e", "411a2df5090ccb88f4c3726e4951ebed579fec11" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sat May 12 11:10:25 2012 +0100" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sat May 12 11:10:25 2012 +0100" }, "message": "Merge remote-tracking branch \u0027regulator/topic/drivers\u0027 into regulator-next\n\nConflicts:\n\tdrivers/regulator/88pm8607.c (simple overlap with a bugfix in v3.4)\n" }, { "commit": "d0a3457d38adbad37e43ffe6b763360b2bfe71d9", "tree": "ed1dcb47e63d38be8205c829564cde4247fc51bd", "parents": [ "f77621cc640a7c50b3d8c5254ecc5d91eaa99d0d" ], "author": { "name": "Jean-François Dagenais", "email": "jeff.dagenais@gmail.com", "time": "Thu May 10 22:32:00 2012 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Thu May 10 22:34:16 2012 -0700" }, "message": "Input: adp5588 - add support for gpio names\n\nSigned-off-by: Jean-François Dagenais \u003cjeff.dagenais@gmail.com\u003e\nAcked-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "411a2df5090ccb88f4c3726e4951ebed579fec11", "tree": "a7cafad203cc96667da2a8c5f8d9d524cc29ea2f", "parents": [ "c30540d78e60068d5638b79f1bcc92b259c3c7e2" ], "author": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Wed May 09 05:44:00 2012 +1000" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed May 09 10:04:33 2012 +0100" }, "message": "regulator: twl-regulator: make TWL4030_ALLOW_UNSUPPORTED more configurable.\n\nThe regulators in the twl4030 can provide some voltage settings\nthat are not offically supported.\nThese settings are disabled by default, but can be enabled with\n CONFIG_TWL4030_ALLOW_UNSUPPORTED\u003dy\nHowever\n - that config variable is not mentioned in any Kconfig so cannot\n be used, and\n - a global setting is clumsy - a per regulator setting would be\n better.\n\nSo define a new \u0027feature\u0027 flag that a board file can set to enable\nthese unsupported volatages for boards which need them.\n\nThis flag cannot (yet) be set using device-tree.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "c30540d78e60068d5638b79f1bcc92b259c3c7e2", "tree": "bdd455d6f5d3412f2f67b97d281023922253be5b", "parents": [ "1f904fd1cdbda0930f667ad6a1b304d3e8f8334f" ], "author": { "name": "NeilBrown", "email": "neilb@suse.de", "time": "Wed May 09 05:43:59 2012 +1000" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Wed May 09 10:04:23 2012 +0100" }, "message": "mfd: twl: define all feature flags in one place.\n\ntwl-regulator has a collection of feature flags, some defined\nin twl-core.c and one defined in i2c/twl.h.\nThis is confusing for anyone adding a new feature flag.\n\nSo collect them together and place them in twl.h immediately\nafter the structure in which they are initially set.\n\nSigned-off-by: NeilBrown \u003cneilb@suse.de\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "8eaeb9393397be8eb700ab38a69c450975463b77", "tree": "1f6b9d8d8197b16c19ed0ed03d55886e0c519ba5", "parents": [ "4accdff7a3e397b43e50f605ee561ba7994745c7" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Apr 03 11:56:51 2012 +0300" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Apr 16 16:45:34 2012 +0200" }, "message": "mfd: Convert twl6040 to i2c driver, and separate it from twl core\n\nComplete the separation of the twl6040 from the twl core since\nit is a separate chip, not part of the twl6030 PMIC.\n\nMake the needed Kconfig changes for the depending drivers at the\nsame time to avoid breaking the kernel build (vibra, ASoC components).\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonicro.com\u003e\nAcked-by: Tony Lindgren \u003ctony@atomide.com\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "30304e5a79d424eb2c8707b3ff0e9b8bf6ab3e8f", "tree": "63968fb97b86861e31922515395feef8a110f884", "parents": [ "750f77064a290beb162352077b52c61b04bcae0e", "b8589e2a8065b8e7773742b60ae96b63b757bb69" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 13:56:35 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Mar 28 13:56:35 2012 -0700" }, "message": "Merge tag \u0027mfd_3.4-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6\n\nPull MFD changes from Samuel Ortiz:\n - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh\u0027s RC5T583 and\n TI\u0027s TPS65090 and TPS65217.\n - New variants support (8420, 8520 ab9540), cleanups and bug fixes for\n the abx500 and db8500 ST-E chipsets.\n - Some minor fixes and update for the wm8994 from Mark.\n - The beginning of a long term TWL cleanup effort coming from the TI\n folks.\n - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997\n drivers.\n\nFix up trivial conflicts due to duplicate patches and header file\ncleanups (\u003clinux/device.h\u003e removal etc).\n\n* tag \u0027mfd_3.4-1\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)\n gpio/twl: Add DT support to gpio-twl4030 driver\n gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support\n mfd: Detach twl6040 from the pmic mfd driver\n mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups\n mfd: Micro-optimization on twl4030 IRQ handler\n mfd: Make twl4030 SIH SPARSE_IRQ capable\n mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files\n mfd: Remove references already defineid in header file from twl-core\n mfd: Remove unneeded header from twl-core\n mfd: Make twl-core not depend on pdata-\u003eirq_base/end\n ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files\n mfd: Return twl6030_mmc_card_detect IRQ for board setup\n Revert \"mfd: Add platform data for MAX8997 haptic driver\"\n mfd: Add support for TPS65090\n mfd: Add some da9052-i2c section annotations\n mfd: Build rtc5t583 only if I2C config is selected to y.\n mfd: Add anatop mfd driver\n mfd: Fix compilation error in tps65910.h\n mfd: Add 8420 variant to db8500-prcmu\n mfd: Add 8520 PRCMU variant to db8500-prcmu\n ...\n" }, { "commit": "fc2bb8d1cde1296d210a0f1ff9ee979a447d0a34", "tree": "725696adebdc70e1b4e0ce8537da25eb5f2bf564", "parents": [ "475c77edf826333aa61625f49d6a2bec26ecb5a6", "bbceeee82ef55c11db0161f4078edd79290e3bcf" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Mar 23 14:12:04 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Fri Mar 23 14:12:04 2012 -0700" }, "message": "Merge branch \u0027i2c-embedded/for-3.4\u0027 of git://git.pengutronix.de/git/wsa/linux\n\nPull i2c embedded updates from Wolfram Sang:\n \"Nothing special from i2c-embedded for this merge window. Two new\n drivers, minor feature additions, bugfixes, cleanups.\n\n All patches have been in linux-next for some time, too.\"\n\n* \u0027i2c-embedded/for-3.4\u0027 of git://git.pengutronix.de/git/wsa/linux:\n i2c-eg20t: Remove write-only variables\n i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time\n i2c-s3c2410: Add stub runtime power management\n i2c-s3c2410: Convert to devm_kzalloc()\n i2c: add CSR SiRFprimaII on-chip I2C controllers driver\n i2c: tegra: Remove unnecessary write to INT_STATUS\n i2c: imx: fix imx driver to work though signal is pending\n i2c: designware: dw_i2c_init_driver as subsys initcall\n misc: at24: describe platform_data with kernel_doc\n i2c: Move I2C_EG20T option to the right place.\n i2c: Support for Netlogic XLR/XLS I2C controller.\n i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA\n i2c: versatile: Add Device Tree support\n" }, { "commit": "be53bfdb8088e9d1924199cc1a96e113756b1075", "tree": "8c65eb9d82ca4c0f11c17cfdc44d5263820b415b", "parents": [ "b2094ef840697bc8ca5d17a83b7e30fad5f1e9fa", "5466c7b1683a23dbbcfb7ee4a71c4f23886001c7" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 22 13:08:22 2012 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 22 13:08:22 2012 -0700" }, "message": "Merge branch \u0027drm-next\u0027 of git://people.freedesktop.org/~airlied/linux\n\nPull drm main changes from Dave Airlie:\n \"This is the main drm pull request, I\u0027m probably going to send two more\n smaller ones, will explain below.\n\n This contains a patch that is also in the fbdev tree, but it should be\n the same patch, it added an API for hot unplugging framebuffer\n devices, and I need that API for a new driver.\n\n It also contains some changes to the i2c tree which Jean has acked,\n and one change to moorestown platform stuff in x86.\n\n Highlights:\n - new drivers: UDL driver for USB displaylink devices, kms only,\n should support correct hotplug operations.\n - core: i2c speedups + better hotplug support, EDID overriding via\n firmware interface - allows user to load a firmware for a broken\n monitor/kvm from userspace, it even has documentation for it.\n - exynos: new HDMI audio + hdmi 1.4 + virtual output driver\n - gma500: code cleanup\n - radeon: cleanups, CS optimisations, streamout support and pageflip\n fix\n - nouveau: NVD9 displayport support + more reclocking work\n - i915: re-enabling GMBUS, finish gpu patch (might help hibernation\n who knows), missed irq fixes, stencil tiling fixes, interlaced\n support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB,\n semaphore fixes\n\n As well as the usual bunch of cleanups and fixes all over the place.\n\n I\u0027ve got two things I\u0027d like to merge a bit later:\n\n a) AMD support for all their new radeonhd 7000 series GPU and APUs.\n AMD dropped this a bit late due to insane internal review\n processes, (please AMD just follow Intel and let open source guys\n ship stuff early) however I don\u0027t want to penalise people who own\n this hardware (since its been on sale for 3-4 months and GPU hw\n doesn\u0027t exactly have a lifetime in years) and consign them to\n using closed drivers for longer than necessary. The changes are\n well contained and just plug into the driver new gpu functionality\n so they should be fairly regression proof. I just want to give\n them a bit of a run on the hw AMD kindly sent me.\n\n b) drm prime/dma-buf interface code. This is just infrastructure\n code to expose the dma-buf stuff to drm drivers and to userspace.\n I\u0027m not planning on pushing any driver support in this cycle\n (except maybe exynos), but I\u0027d like to get the infrastructure code\n in so for the next cycle I can start getting the driver support\n into the individual drivers. We have started driver support for\n i915, nouveau and udl along with I think exynos and omap in\n staging. However this code relies on the dma-buf tree being\n pulled into your tree first since it needs the latest interfaces\n from that tree. I\u0027ll push to get that tree sent asap.\n\n (oh and any warnings you see in i915 are gcc\u0027s fault from what anyone\n can see).\"\n\nFix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new\nmsic_thermal_platform_data() thermal function being added next to the\ntc35876x_platform_data() i2c device function..\n\n* \u0027drm-next\u0027 of git://people.freedesktop.org/~airlied/linux: (326 commits)\n drm/i915: use DDC_ADDR instead of hard-coding it\n drm/radeon: use DDC_ADDR instead of hard-coding it\n drm: remove unneeded redefinition of DDC_ADDR\n drm/exynos: added virtual display driver.\n drm: allow loading an EDID as firmware to override broken monitor\n drm/exynos: enable hdmi audio feature\n drm/exynos: add default pixel format for plane\n drm/exynos: cleanup exynos_hdmi.h\n drm/exynos: add is_local member in exynos_drm_subdrv struct\n drm/exynos: add subdrv open/close functions\n drm/exynos: remove module of exynos drm subdrv\n drm/exynos: release pending pageflip events when closed\n drm/exynos: added new funtion to get/put dma address.\n drm/exynos: update gem and buffer framework.\n drm/exynos: added mode_fixup feature and code clean.\n drm/exynos: add HDMI version 1.4 support\n drm/exynos: remove exynos_mixer.h\n gma500: Fix mmap frambuffer\n drm/radeon: Drop radeon_gem_object_(un)pin.\n drm/radeon: Restrict offset for legacy display engine.\n ...\n" }, { "commit": "f01b1f90bf46ddaf2a68215a9489364c974e5689", "tree": "3beb31a6777b16926d81eb10d1ec0c901a175503", "parents": [ "78518ffa08fceee42d61359303c58bdd0a82033f" ], "author": { "name": "Benoit Cousson", "email": "b-cousson@ti.com", "time": "Wed Feb 29 22:38:06 2012 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu Mar 22 13:04:54 2012 +0100" }, "message": "mfd: Make twl4030 SIH SPARSE_IRQ capable\n\ntwl4030 is using a two level irq controllers infrastruture.\nSo far, only the first level was using dynamic irq_desc allocation\nto be able to have irq_domain support for device tree.\nThere is a need to allocate separate irq_descs for the SIH too to\navoid hacking the first level with interrupts from the second level.\n\nAdd an irq_base parameter to allow the caller to provide the base from\npdata or from dynamic allocation.\n\nAffect TWL4030_NR_IRQS to the twl-core IRQs only.\n\nMoreover that will allow the extraction of the of_node pointer for further\nDevice Tree conversion.\n\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\nSigned-off-by: Benoit Cousson \u003cb-cousson@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "46eda3e96a65b378041c79c51ff2e02009f7e2d0", "tree": "92a50ac1a12e660240a60c55510fd4b2d8a2d424", "parents": [ "e9d47fa4ebb9382bc3282fc13ad28a4e2a1a089e" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue Feb 28 15:09:13 2012 +0530" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sun Mar 11 20:09:26 2012 +0000" }, "message": "mfd: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS\n\nTo be able to attach consumers to these supplies from board\nfiles we need to have regulator_init_data for them.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "34a38440689b06a515104d668494e0ff8a4e1537", "tree": "b6ea0840779978b209a11eeaedc0575080d57885", "parents": [ "63bfff4e20211b464cbea6e79e5fd36df227c154" ], "author": { "name": "Tero Kristo", "email": "t-kristo@ti.com", "time": "Tue Feb 28 15:09:10 2012 +0530" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sun Mar 11 20:09:00 2012 +0000" }, "message": "regulator: twl6030: add support for vdd1, vdd2 and vdd3 regulators\n\nvdd1 and vdd2 are now common regulators for twl4030 and twl6030. Also\nadded vdd3 as a new regulator for twl6030. twl6030 vdd1...vdd3 smps\nregulator voltages can only be controlled through the smartreflex\nvoltage channel, thus the support for the voltage_get and set is\nminimal and requires external controller.\n\nSigned-off-by: Tero Kristo \u003ct-kristo@ti.com\u003e\nSigned-off-by: Rajendra Nayak \u003crnayak@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "63bfff4e20211b464cbea6e79e5fd36df227c154", "tree": "4ea7a62c37820578be7ecbc943f6e62a017c64e4", "parents": [ "a33b6e5a8fb5fadeef206bacef13117e8a3080c4" ], "author": { "name": "Tero Kristo", "email": "t-kristo@ti.com", "time": "Thu Feb 16 12:27:52 2012 +0200" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Sun Mar 11 20:08:45 2012 +0000" }, "message": "regulator: twl4030: add support for external voltage get/set\n\nThis is needed for SMPS regulators, which use the OMAP voltage\nprocessor for voltage get/set functions instead of the normal I2C\nchannel. For this purpose, regulator_init_data-\u003edriver_data contents\nare expanded, it is now a struct which contains function pointers\nfor the set/get voltage operations, a data pointer for these, and\nthe previously used features bitmask.\n\nSigned-off-by: Tero Kristo \u003ct-kristo@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e [for the MFD part]\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "026abc333205c1fff80138b8c2cac3d0347685f4", "tree": "dbcb2ad763f96b5f0c99ec5650f477aa103a8528", "parents": [ "c6265ff593467d472814aa9f16f89f6c1dc90a5d" ], "author": { "name": "Kirill A. Shutemov", "email": "kirill.shutemov@linux.intel.com", "time": "Thu Mar 08 16:02:20 2012 +0000" }, "committer": { "name": "Dave Airlie", "email": "airlied@redhat.com", "time": "Sat Mar 10 13:05:48 2012 +0000" }, "message": "gma500: initial medfield merge\n\nWe need to merge this ahead of some of the cleanup because a lot of needed\ncleanup spans both new and old chips. If we try and clean up and the merge\nwe end up fighting ourselves.\n\nSigned-off-by: Kirill A. Shutemov \u003ckirill.shutemov@linux.intel.com\u003e\n[With a load of the cleanup stuff folded in, register stuff reworked sanely]\nSigned-off-by: Alan Cox \u003calan@linux.intel.com\u003e\nSigned-off-by: Dave Airlie \u003cairlied@redhat.com\u003e\n" }, { "commit": "64eac23196e9cb7cad63f3c747928cc53d2699b5", "tree": "d786ab36a0d0c09a6b5123dbf030902653cc619c", "parents": [ "3e1b76be0bf3e14b02882bd87af68d0469f0f660" ], "author": { "name": "Wolfram Sang", "email": "wolfram@the-dreams.de", "time": "Fri Feb 24 07:41:06 2012 +0100" }, "committer": { "name": "Wolfram Sang", "email": "w.sang@pengutronix.de", "time": "Fri Feb 24 22:25:58 2012 +0100" }, "message": "misc: at24: describe platform_data with kernel_doc\n\nThere have been questions about its fields lately, so describe them properly.\n\nReported-by: Yegor Yefremov \u003cyegorslists@googlemail.com\u003e\nSigned-off-by: Wolfram Sang \u003cwolfram@the-dreams.de\u003e\n" }, { "commit": "26cc3ab984cd00e95cb58ba5aaea4238ea56c700", "tree": "472a56db7678b50e3d6bba59c2f04a09e40635be", "parents": [ "aeb5032b3f8b9ab69daa545777433fa94b3494c4" ], "author": { "name": "Igor Grinberg", "email": "grinberg@compulab.co.il", "time": "Sun Nov 13 11:49:50 2011 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Jan 09 00:37:40 2012 +0100" }, "message": "mfd: Add power off functionality to TWL\n\nTWL family of PMICs, used in master mode, have a power off\nfunctionality. The resulting power off sequence shuts down all the SoC\nsupplies, LDOs, etc. The sequence is described in the datasheets\nchapter \"Power-Off Sequence\".\nNote, that board must be wired correctly for the power off to work as\nexpected.\n\nSigned-off-by: Igor Grinberg \u003cgrinberg@compulab.co.il\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a0a4194c943bc64dd7b6e26cccb036cb26b81363", "tree": "4282f0dd573344d10f69616eb05868b5cd563cc1", "parents": [ "cf0223503e6198292cdcc864e01eeb5fe7490752", "b958f7a7cbdfbf59ba61de7ebb9c59b0ee3a7967" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Nov 03 09:40:51 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Nov 03 09:40:51 2011 -0700" }, "message": "Merge branch \u0027for-next\u0027 of git://git.infradead.org/users/sameo/mfd-2.6\n\n* \u0027for-next\u0027 of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)\n mfd: Fix missing abx500 header file updates\n mfd: Add missing \u003clinux/io.h\u003e include to intel_msic\n x86, mrst: add platform support for MSIC MFD driver\n mfd: Expose TurnOnStatus in ab8500 sysfs\n mfd: Remove support for early drop ab8500 chip\n mfd: Add support for ab8500 v3.3\n mfd: Add ab8500 interrupt disable hook\n mfd: Convert db8500-prcmu panic() into pr_crit()\n mfd: Refactor db8500-prcmu request_clock() function\n mfd: Rename db8500-prcmu init function\n mfd: Fix db5500-prcmu defines\n mfd: db8500-prcmu voltage domain consumers additions\n mfd: db8500-prcmu reset code retrieval\n mfd: db8500-prcmu tweak for modem wakeup\n mfd: Add db8500-pcmu watchdog accessor functions for watchdog\n mfd: hwacc power state db8500-prcmu accessor\n mfd: Add db8500-prcmu accessors for PLL and SGA clock\n mfd: Move to the new db500 PRCMU API\n mfd: Create a common interface for dbx500 PRCMU drivers\n mfd: Initialize DB8500 PRCMU regs\n ...\n\nFix up trivial conflicts in\n\tarch/arm/mach-imx/mach-mx31moboard.c\n\tarch/arm/mach-omap2/board-omap3beagle.c\n\tarch/arm/mach-u300/include/mach/irqs.h\n\tdrivers/mfd/wm831x-spi.c\n" }, { "commit": "3d6271f92e98094584fd1e609a9969cd33e61122", "tree": "a3091ebc18edf9a2cef177bace2aea8b0b16d8ea", "parents": [ "881de67046f424fc3a6e05b1c681c12afd94e802" ], "author": { "name": "Kyle Manna", "email": "kyle@kylemanna.com", "time": "Thu Aug 11 22:33:13 2011 -0500" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Mon Oct 24 14:09:10 2011 +0200" }, "message": "mfd: Turn on the twl4030-madc MADC clock\n\nWithout turning the MADC clock on, no MADC conversions occur.\n\n$ cat /sys/class/hwmon/hwmon0/device/in8_input\n[ 53.428436] twl4030_madc twl4030_madc: conversion timeout!\ncat: read error: Resource temporarily unavailable\n\nSigned-off-by: Kyle Manna \u003ckyle@kylemanna.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "341deefe8f4584b09564193cb46d8cf386f491a5", "tree": "6610d3c3c0306e3b1a8e82552f5e426818ff5a57", "parents": [ "550eca7cafa1c6e2c077afb2211a364a982d8645" ], "author": { "name": "Philip Rakity", "email": "prakity@marvell.com", "time": "Tue Oct 11 20:54:55 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue Oct 11 20:56:41 2011 -0700" }, "message": "Input: tsc2007 - make sure that X plate resistance is specified\n\nAbort driver initialization if X plate resistance was not specified in\nplatform data as it will cause pressure to be always calculated as 0,\nand making userspace ignore touch coordinates.\n\nSigned-off-by: Philip Rakity \u003cprakity@marvell.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "bc574e190d3fbed37d724e33a16aee326d6f2ac4", "tree": "ecbd7238f1402783f122d2a1a0310bb2cdb1dd9a", "parents": [ "b0af8dfdd67699e25083478c63eedef2e72ebd85", "db47cccebd74e575963bc80cc5ac926399388a21", "345e397d841068c4ba2829a226fbe6613bac1d0d" ], "author": { "name": "Arnd Bergmann", "email": "arnd@arndb.de", "time": "Sun Jul 17 21:48:22 2011 +0200" }, "committer": { "name": "Arnd Bergmann", "email": "arnd@arndb.de", "time": "Sun Jul 17 21:48:22 2011 +0200" }, "message": "Merge branches \u0027omap/prcm\u0027 and \u0027omap/mfd\u0027 of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc into next/devel-2\n" }, { "commit": "1fbe99529d9490fd29982af07731650f112ffdfa", "tree": "f65de0c7602c079cc24c34e233c19dd9db1770a8", "parents": [ "f7026c99961da48cc4c09cc4f152db5fb30832e7" ], "author": { "name": "Axel Castaneda Gonzalez", "email": "x0055901@ti.com", "time": "Wed Feb 23 20:08:28 2011 -0600" }, "committer": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Jul 04 19:36:29 2011 +0300" }, "message": "ASoC: twl6040: Configure ramp step based on platform\n\nEnable ramp down/up step to be configured based on\nplatform.\n\nSigned-off-by: Axel Castaneda Gonzalez \u003cx0055901@ti.com\u003e\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n" }, { "commit": "cc697d38392c92b7504e7719c65ae905f0a0618a", "tree": "53f0c7be681859d3529a24245bcdae76e664d92c", "parents": [ "6c44863763254eaf96ec7d4f816fb88605301e76" ], "author": { "name": "Misael Lopez Cruz", "email": "misael.lopez@ti.com", "time": "Sun May 01 03:51:24 2011 -0500" }, "committer": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Jul 04 19:36:18 2011 +0300" }, "message": "input: Add initial support for TWL6040 vibrator\n\nAdd twl6040_vibra as a child of MFD device twl6040_codec. This\nimplementation covers the PCM-to-PWM mode of TWL6040 vibrator\nmodule.\n\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nCC: Tejun Heo \u003ctj@kernel.org\u003e\nAcked-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "f19b2823f82499c60ec15d5fe8783193d77e3043", "tree": "75148aed2558ec27ca87cf94e7ec3f398cd77e96", "parents": [ "4ae6df5e1018796ce260be59b2c603bd0f9faa94" ], "author": { "name": "Misael Lopez Cruz", "email": "misael.lopez@ti.com", "time": "Wed Apr 27 02:14:07 2011 -0500" }, "committer": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Jul 04 19:34:37 2011 +0300" }, "message": "mfd: twl6040: Add initial support\n\nTWL6040 IC provides analog high-end audio codec functions for\nhandset applications. It contains several audio analog inputs\nand outputs as well as vibrator support. It\u0027s connected to the\nhost processor via PDM interface for audio data communication.\nThe audio modules are controlled by internal registers that\ncan be accessed by I2C and PDM interface.\n\nTWL6040 MFD will be registered as a child of TWL-CORE, and will\nhave two children of its own: twl6040-codec and twl6040-vibra.\n\nThis driver is based on TWL4030 and WM8350 MFD drivers.\n\nSigned-off-by: Misael Lopez Cruz \u003cmisael.lopez@ti.com\u003e\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "4ae6df5e1018796ce260be59b2c603bd0f9faa94", "tree": "0a673e318826a51ce2660ed7e978eaa6e64fc6d6", "parents": [ "57fe7251f5bfc4332f24479376de48a1e8ca6211" ], "author": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Tue May 31 15:21:13 2011 +0300" }, "committer": { "name": "Peter Ujfalusi", "email": "peter.ujfalusi@ti.com", "time": "Mon Jul 04 18:44:02 2011 +0300" }, "message": "MFD: twl4030-audio: Rename platform data\n\nAllign the platform data names for twl4030 audio submodule:\ntwl4030_audio_data: for the core MFD driver\ntwl4030_codec_data: for ASoC codec driver\ntwl4030_vibra_data: for the input/ForceFeedback driver\n\nTo avoid breakage, change all depending drivers, files\nto use the new types.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "a59ec1e7ff98cc4365d5b1bff4e7102e86b5716b", "tree": "2500a9be830853d901d6b8210f9bfbae02a9987a", "parents": [ "7f81c8890c15a10f5220bebae3b6dfae4961962a" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Wed Jun 15 15:08:11 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Jun 15 20:03:59 2011 -0700" }, "message": "backlight: new driver for the ADP8870 backlight devices\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nCc: Richard Purdie \u003crpurdie@rpsys.net\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "6523b148b44be38d89c2ee9865d34da30d9f5f1c", "tree": "aa4408d8655093167289092b62c057122dd8a51d", "parents": [ "521d8ec3f0d8069bea3b3afa70f487cdb5118018" ], "author": { "name": "Graeme Gregory", "email": "gg@slimlogic.co.uk", "time": "Thu May 12 14:27:56 2011 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu May 26 19:45:40 2011 +0200" }, "message": "mfd: Fix twl6030 irq definitions\n\nThe charger fault IRQs from the twl will in future patches be handled\nby a seperate IRQ handler in the charger driver than the general charger\nIRQ. Give them different IRQ numbers now to allow the charger driver to\nbe merged in the future.\n\nSigned-off-by: Graeme Gregory \u003cgg@slimlogic.co.uk\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "521d8ec3f0d8069bea3b3afa70f487cdb5118018", "tree": "8cc81ed96a6cd8b5d495cb3d74732f705117cd73", "parents": [ "586e1a1763d34bd256f3f1e77293d8386e4871d2" ], "author": { "name": "Graeme Gregory", "email": "gg@slimlogic.co.uk", "time": "Thu May 12 14:27:55 2011 +0100" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu May 26 19:45:39 2011 +0200" }, "message": "mfd: Add phoenix lite (twl6025) support to twl6030\n\nPhoenix Lite is based on the twl6030 family of PMICs. It has mostly the\nsame feature set of twl6030 but with small changes. The codec block has\nalso been removed. It also has a new charger block and new features in\nits ADC block. VUSB handling also differs.\n\nSigned-off-by: Graeme Gregory \u003cgg@slimlogic.co.uk\u003e\nReviewed-by: Mark Brown \u003cbroonie@opensource.wolfsonicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "ca972d13382436530896e90591e2793e7a9e7eba", "tree": "414e0e666015509a66342a8f5ce2184e0a1ef9ba", "parents": [ "d7ac829fa30d44d6553a0ead41f47bb92ee4d73e" ], "author": { "name": "Lesly A M", "email": "leslyam@ti.com", "time": "Thu Apr 14 17:57:53 2011 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu May 26 19:45:24 2011 +0200" }, "message": "mfd: TWL5030 version checking in twl-core\n\nAdded API to get the TWL5030 Si version from the IDCODE register.\nIt is used for enabling the workaround for TWL erratum 27.\n\nSigned-off-by: Lesly A M \u003cleslyam@ti.com\u003e\nCc: Nishanth Menon \u003cnm@ti.com\u003e\nCc: David Derrick \u003cdderrick@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "d7ac829fa30d44d6553a0ead41f47bb92ee4d73e", "tree": "d189f6ab11a724c2430943cc6e76b16ec29d02b0", "parents": [ "1f968ff61f2987f500832e93b9b704f26adadea6" ], "author": { "name": "Lesly A M", "email": "leslyam@ti.com", "time": "Thu Apr 14 17:57:51 2011 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Thu May 26 19:45:23 2011 +0200" }, "message": "mfd: Modifying the twl4030-power macro name Main_Ref to all caps\n\nModifying the macro name Main_Ref to all caps(MAIN_REF).\n\nSuggested by Nishanth Menon \u003cnm@ti.com\u003e\n\nSigned-off-by: Lesly A M \u003cleslyam@ti.com\u003e\nCc: Nishanth Menon \u003cnm@ti.com\u003e\nCc: David Derrick \u003cdderrick@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "4a7df24ddc7097cd789a7527187826552ea0765e", "tree": "2e70557e1d8e6d971ee6094de823900df1f8288e", "parents": [ "37d8cb5478651b27779b9a80d024c614c452eae3", "5bdfdfeed5eed599a3ddc455f7c254a209ceae8d" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 24 16:39:23 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue May 24 16:39:23 2011 -0700" }, "message": "Merge branch \u0027for-linus/2640/i2c\u0027 of git://git.fluff.org/bjdooks/linux\n\n* \u0027for-linus/2640/i2c\u0027 of git://git.fluff.org/bjdooks/linux: (21 commits)\n mach-ux500: set proper I2C platform data from MOP500s\n i2c-nomadik: break out single messsage transmission\n i2c-nomadik: reset the hw after status check\n i2c-nomadik: remove the unnecessary delay\n i2c-nomadik: change the TX and RX threshold\n i2c-nomadik: add code to retry on timeout failure\n i2c-nomadik: use pm_runtime API\n i2c-nomadik: print abort cause only on abort tag\n i2c-nomadik: correct adapter timeout initialization\n i2c-nomadik: remove the redundant error message\n i2c-nomadik: corrrect returned error numbers\n i2c-nomadik: fix speed enumerator\n i2c-nomadik: make i2c timeout specific per i2c bus\n i2c-nomadik: add regulator support\n i2c: i2c-sh_mobile bus speed platform data V2\n i2c: i2c-sh_mobile clock string removal\n i2c-eg20t: Support new device ML7223 IOH\n i2c: tegra: Add de-bounce cycles.\n i2c: tegra: fix repeated start handling\n i2c: tegra: recover from spurious interrupt storm\n ...\n" }, { "commit": "891e376b1e864519bf7e49fa741f473078318530", "tree": "8b7876c61ab3191e68a82e5c531864dc98a6a9e6", "parents": [ "1af38eac8cdb70dbad3086b4f1bf7296eb1b09b1" ], "author": { "name": "Thierry Reding", "email": "thierry.reding@avionic-design.de", "time": "Tue May 17 09:32:29 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue May 17 09:38:53 2011 -0700" }, "message": "Input: tsc2007 - add X, Y and Z fuzz factors to platform data\n\nThese new platform-specific values can be used to set the fuzz parameter\npassed to the input_set_abs_params() function for the ABS_X, ABS_Y and\nABS_PRESSURE axes.\n\nSigned-off-by: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "1af38eac8cdb70dbad3086b4f1bf7296eb1b09b1", "tree": "74a251236e74d963592da41cde26b60fe33b6f0a", "parents": [ "2d137c7ed25f9754f52495af570897ad993e4fe7" ], "author": { "name": "Thierry Reding", "email": "thierry.reding@avionic-design.de", "time": "Tue May 17 09:32:02 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue May 17 09:38:49 2011 -0700" }, "message": "Input: tsc2007 - add poll_period parameter to platform data\n\nThis new parameter allows the polling frequency to be configured while\nkeeping the default of once every millisecond.\n\nSigned-off-by: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "2d137c7ed25f9754f52495af570897ad993e4fe7", "tree": "0d5a131c68022d5b3b24867e65731bf7e85d831c", "parents": [ "84005eb5ea2939d448047fcf6924b3b9b6ed974d" ], "author": { "name": "Thierry Reding", "email": "thierry.reding@avionic-design.de", "time": "Tue May 17 09:31:33 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue May 17 09:38:43 2011 -0700" }, "message": "Input: tsc2007 - add poll_delay parameter to platform data\n\nDepending on the quality of the touch panel, the time for the X-, X+, Y-\nand Y+ inputs to settle may vary. The poll_delay parameter can be used\nto override the default of 1 millisecond.\n\nCc: Dmitry Torokhov \u003cdmitry.torokhov@gmail.com\u003e\nCc: Kwangwoo Lee \u003ckwangwoo.lee@gmail.com\u003e\nSigned-off-by: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "84005eb5ea2939d448047fcf6924b3b9b6ed974d", "tree": "3a31ceef0058d784461c5b69b38ca4c23fe42d5a", "parents": [ "4a1a42af0aba011e263098f107a2f45e0de2f279" ], "author": { "name": "Thierry Reding", "email": "thierry.reding@avionic-design.de", "time": "Tue May 17 09:31:01 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Tue May 17 09:38:39 2011 -0700" }, "message": "Input: tsc2007 - add max_rt parameter to platform data\n\nFinger touch events or very quick stylus events on low-quality panels\ncan cause the tsc2007 to read bogus values. Looking at oscilloscope\nsnapshots, this seems to be caused by the touch event disappearing\nduring the measurements. These bogus values result in misclicks, where\nthe X and Y values deviate from the real position.\n\nMost of these misclicks can be filtered out by setting a low enough\nthreshold for the maximum resistance (which is loosely the inverse of\nthe pressure) allowed to consider a set of values valid. Since this\nbehaviour is largely dependent on the type and quality of the panel,\nthis commit introduces the max_rt parameter. The default value is kept\nat MAX_12BIT.\n\nSigned-off-by: Thierry Reding \u003cthierry.reding@avionic-design.de\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "36682b81de32090f5c9fac165e71ab8939aab8c0", "tree": "117c09e71f3482fc3b483f4ee7345437df28e1f8", "parents": [ "7cbbb758d3c93b24b45b169af55440d2e7d5b7f6" ], "author": { "name": "Zhang Jiejing", "email": "jiejing.zhang@freescale.com", "time": "Wed May 11 14:32:01 2011 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Thu May 12 08:28:58 2011 -0700" }, "message": "Input: add driver FSL MPR121 capacitive touch sensor\n\nThis patch adds basic support for Freescale MPR121 capacitive touch\nsensor. It\u0027s an i2c controller with up to 12 capacitance sensing inputs.\n\nProduct information (data sheet, application notes) can be found here:\nhttp://www.freescale.com/webapp/sps/site/prod_summary.jsp?code\u003dMPR121\n\nSigned-off-by: Zhang Jiejing \u003cjiejing.zhang@freescale.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "81f8115305f821335cf9e16110bf0806f7b93283", "tree": "99353fbf61b57769b52cadb47c30ae6f3fb88479", "parents": [ "1082d5d29d9a71f43b969b89ce613374602a6946" ], "author": { "name": "Magnus Damm", "email": "damm@opensource.se", "time": "Thu Apr 28 13:25:36 2011 +0900" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Wed May 11 07:08:13 2011 +0100" }, "message": "i2c: i2c-sh_mobile bus speed platform data V2\n\nAdd support to the i2c-sh_mobile driver for setting\nthe I2C bus speed using platform data.\n\nSigned-off-by: Magnus Damm \u003cdamm@opensource.se\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "f99c1d4f94f91fd3a20bd2eaa3be9c5e7d2668eb", "tree": "317d1434bfdd7f13aa0f4ee73e022eb7c7d5c89a", "parents": [ "bcd2f639629b58fbc702bb8be348a03e75472021" ], "author": { "name": "Keerthy", "email": "j-keerthy@ti.com", "time": "Tue Mar 01 19:12:26 2011 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Mar 23 10:42:00 2011 +0100" }, "message": "mfd: Add twl4030 madc driver\n\nIntroducing a driver for MADC on TWL4030 powerIC. MADC stands for monitoring\nADC. This driver monitors the real time conversion of analog signals like\nbattery temperature, battery cuurent etc.\n\nSigned-off-by: Keerthy \u003cj-keerthy@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "8e6de4a30294809420ac9a974b4f28b38ebdb38f", "tree": "959d2347144addb920e80ffbf0950d1bcd9a2437", "parents": [ "dae2db30c114cd0dec59b4130c315c9cce351741" ], "author": { "name": "Balaji T K", "email": "balajitk@ti.com", "time": "Thu Feb 10 18:44:50 2011 +0530" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Wed Mar 23 10:41:48 2011 +0100" }, "message": "regulator: twl: add clk32kg to twl-regulator\n\nIn OMAP4 Blaze and Panda, 32KHz clock to WLAN is supplied from Phoenix\nTWL6030. The 32KHz clock state (ON/OFF) is configured in\nCLK32KG_CFG_[GRP, TRANS, STATE] register. This follows the same register\nprogramming model as other regulators in TWL6030. So add CLK32KG as pseudo\nregulator.\n\nSigned-off-by: Balaji T K \u003cbalajitk@ti.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "75ea6358bc7d97630a8edc2b89c930de118cf7eb", "tree": "e77a60e46844adf71758bad41d77d40658acd7eb", "parents": [ "14577beb8293c187a12d2e78ac6250d5dcec2190", "97491ba3f64c2137101efdfe7593305d692d7d63" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 22 10:05:27 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Mar 22 10:05:27 2011 -0700" }, "message": "Merge branch \u0027for-linus/2639/i2c-2\u0027 of git://git.fluff.org/bjdooks/linux\n\n* \u0027for-linus/2639/i2c-2\u0027 of git://git.fluff.org/bjdooks/linux:\n i2c-pxa2xx: Don\u0027t clear isr bits too early\n i2c-pxa2xx: Fix register offsets\n i2c-pxa2xx: pass of_node from platform driver to adapter and publish\n i2c-pxa2xx: check timeout correctly\n i2c-pxa2xx: add support for shared IRQ handler\n i2c-pxa2xx: Add PCI support for PXA I2C controller\n ARM: pxa2xx: reorganize I2C files\n i2c-pxa2xx: use dynamic register layout\n i2c-mxs: set controller to pio queue mode after reset\n i2c-eg20t: support new device OKI SEMICONDUCTOR ML7213 IOH\n i2c/busses: Add support for Diolan U2C-12 USB-I2C adapter\n" }, { "commit": "c0046867f34bb81ec3f237ebbc5241ae678b8379", "tree": "a5d9e95c3fcd09a53dac9ce88abb00f4bef4a4fc", "parents": [ "fdf241a8ed93236915c70717a4b6dfb856274496" ], "author": { "name": "Dirk Eibach", "email": "eibach@gdsys.de", "time": "Mon Mar 21 17:59:37 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Mon Mar 21 17:59:37 2011 +0100" }, "message": "hwmon: (ads1015) Make gain and datarate configurable\n\nConfiguration for ads1015 gain and datarate is possible via\ndevicetree or platform data.\n\nThis is a followup patch to previous ads1015 patches on Jean Delvares\ntree.\n\nSigned-off-by: Dirk Eibach \u003ceibach@gdsys.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "8c22a8f57516275afcd81c84f3724ac08cf6aa7b", "tree": "9b3e0770466cf7edcb2d48f483cae79fa82bdfce", "parents": [ "a98d506c08ffe754fa013c7f70c4d578b991fb4b" ], "author": { "name": "Dirk Eibach", "email": "eibach@gdsys.de", "time": "Mon Mar 21 17:59:36 2011 +0100" }, "committer": { "name": "Jean Delvare", "email": "khali@endymion.delvare", "time": "Mon Mar 21 17:59:36 2011 +0100" }, "message": "hwmon: Add support for Texas Instruments ADS1015\n\nSigned-off-by: Dirk Eibach \u003ceibach@gdsys.de\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "b459396ee9398bdf61e3118ca730394f58e90c9c", "tree": "3353e4671ed424b4b069428643daf39f0e3f281b", "parents": [ "d6668c7cd4defdab1a74c8dd271b5ca23d99b627" ], "author": { "name": "Sebastian Andrzej Siewior", "email": "bigeasy@linutronix.de", "time": "Wed Feb 23 12:38:16 2011 +0100" }, "committer": { "name": "Ben Dooks", "email": "ben-linux@fluff.org", "time": "Mon Mar 21 09:09:33 2011 +0000" }, "message": "ARM: pxa2xx: reorganize I2C files\n\nThis patch moves the platform data definition from\narch/arm/plat-pxa/include/plat/i2c.h to include/linux/i2c/pxa-i2c.h so\nit can be accessed from x86 the same way as on ARM.\n\nThis change should make no functional change to the PXA code. The move\nis verified by building the following defconfigs:\n cm_x2xx_defconfig corgi_defconfig em_x270_defconfig ezx_defconfig\n imote2_defconfig pxa3xx_defconfig spitz_defconfig zeus_defconfig\n raumfeld_defconfig magician_defconfig mmp2_defconfig pxa168_defconfig\n pxa910_defconfig\n\nSigned-off-by: Sebastian Andrzej Siewior \u003cbigeasy@linutronix.de\u003e\nSigned-off-by: Dirk Brandewie \u003cdirk.brandewie@gmail.com\u003e\nSigned-off-by: Ben Dooks \u003cben-linux@fluff.org\u003e\n" }, { "commit": "a952baa034ae7c2e4a66932005cbc7ebbccfe28d", "tree": "ff5abe0c77f5b129946300677d9b57b00d926a1e", "parents": [ "5bab188a316718a26346cdb25c4cc6b319f8f907", "97eb3f24352ec6632c2127b35d8087d2a809a9b9" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 19 22:27:06 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Sat Mar 19 22:27:06 2011 -0700" }, "message": "Merge branch \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input\n\n* \u0027for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits)\n Input: tsc2005 - remove \u0027disable\u0027 sysfs attribute\n Input: tsc2005 - add open/close\n Input: tsc2005 - handle read errors from SPI layer\n Input: tsc2005 - do not rearm timer in hardirq handler\n Input: tsc2005 - don\u0027t use work for \u0027pen up\u0027 handling\n Input: tsc2005 - do not use 0 in place of NULL\n Input: tsc2005 - use true/false for boolean variables\n Input: tsc2005 - hide selftest attribute if we can\u0027t reset\n Input: tsc2005 - rework driver initialization code\n Input: tsc2005 - set up bus type in input device\n Input: tsc2005 - set up parent device\n Input: tsc2005 - clear driver data after unbinding\n Input: tsc2005 - add module description\n Input: tsc2005 - remove driver banner message\n Input: tsc2005 - remove incorrect module alias\n Input: tsc2005 - convert to using dev_pm_ops\n Input: tsc2005 - use spi_get/set_drvdata()\n Input: introduce tsc2005 driver\n Input: xen-kbdfront - move to drivers/input/misc\n Input: xen-kbdfront - add grant reference for shared page\n ...\n" }, { "commit": "0df0914d414a504b975f3cc66ace0c16ef55b7f3", "tree": "c97ffa357943a8b226cdec1b9632c4cede813205", "parents": [ "6899608533410557e6698cb9d4ff6df553916e98", "05f689400ea5fa3d71af82f910c8b140f87ad1f3" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 17 19:28:15 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 17 19:28:15 2011 -0700" }, "message": "Merge branch \u0027omap-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6\n\n* \u0027omap-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits)\n omap: zoom: host should not pull up wl1271\u0027s irq line\n arm: plat-omap: iommu: fix request_mem_region() error path\n OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430\n omap4: mux: Remove duplicate mux modes\n omap: iovmm: don\u0027t check \u0027da\u0027 to set IOVMF_DA_FIXED flag\n omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set\n omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected\n omap4: board-omap4panda: Initialise the serial pads\n omap3: board-3430sdp: Initialise the serial pads\n omap4: board-4430sdp: Initialise the serial pads\n omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init\n omap2+: mux: Remove the use of IDLE flag\n omap2+: Add separate list for dynamic pads to mux\n perf: add OMAP support for the new power events\n OMAP4: Add IVA OPP enteries.\n OMAP4: Update Voltage Rail Values for MPU, IVA and CORE\n OMAP4: Enable 800 MHz and 1 GHz MPU-OPP\n OMAP3+: OPP: Replace voltage values with Macros\n OMAP3: wdtimer: Fix CORE idle transition\n Watchdog: omap_wdt: add fine grain runtime-pm\n ...\n\nFix up various conflicts in\n - arch/arm/mach-omap2/board-omap3evm.c\n - arch/arm/mach-omap2/clock3xxx_data.c\n - arch/arm/mach-omap2/usb-musb.c\n - arch/arm/plat-omap/include/plat/usb.h\n - drivers/usb/musb/musb_core.h\n" }, { "commit": "19520fc1ee36164808e6f084bd95e8178e2db231", "tree": "abf66f8c2a2b35e574e9452673263614fc50c63f", "parents": [ "c8def554d031664e984323f6a5d667f070717776", "d668a8b022a201e65ec5e301a9e6dff78987550c" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 17 16:59:38 2011 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Mar 17 16:59:38 2011 -0700" }, "message": "Merge branch \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging\n\n* \u0027hwmon-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (44 commits)\n hwmon: (lineage-pem): Fix in1 voltage alarm sysfs attributes\n hwmon/f71882fg: Add support for f71808e\n hwmon/f71882fg: Add support for f71869f and f71869e\n hwmon/f71882fg: Add support for f71889ed\n hwmon/f71882fg: Break out test for auto pwm\u0027s controlled by digital readings\n hwmon/f71882fg: Separate temp beep sysfs attr from the other temp sysfs attr\n hwmon/f71882fg: Remove bogus temp2_type for certain models\n hwmon/f71882fg: Make number of temps configurable\n hwmon/f71882fg: Make creation of in sysfs attributes more generic\n hwmon/f71882fg: Only allow negative auto point temps if fan_neg_temp is enabled\n hwmon/f71882fg: Fix temp1 sensor type reporting\n hwmon: (w83627ehf) Display correct temperature sensor labels for systems with NCT6775F\n hwmon: (w83627ehf) Add fan debounce support for NCT6775F and NCT6776F\n hwmon: (w83627ehf) Update Kconfig for W83677HG-B, NCT6775F and NCT6776F\n hwmon: (w83627ehf) Store rpm instead of raw fan speed data\n hwmon: (w83627ehf) Use 16 bit fan count registers if supported\n hwmon: (w83627ehf) Add support for Nuvoton NCT6775F and NCT6776F\n hwmon: (w83627ehf) Permit enabling SmartFan IV mode if configured at startup\n hwmon: (w83627ehf) Convert register arrays to 16 bit, and convert access to pointers\n hwmon: (w83627ehf) Remove references to datasheets which no longer exist\n ...\n" }, { "commit": "442aba78728e77e03172ba83e905b9aff96febcf", "tree": "fe6c99958017922dafd4010c3af2c8c8b6441057", "parents": [ "06923f84422371a6fb10b3efcd05b80ab48715c0" ], "author": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Wed Jan 26 20:09:02 2011 -0800" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Mar 14 22:36:26 2011 -0700" }, "message": "hwmon: PMBus device driver\n\nThis driver adds support for hardware monitoring features of various PMBus\ndevices.\n\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\n" }, { "commit": "a5b79d62f2e6d1b0d44bcdafce46f47bf355b9fe", "tree": "dc918d8203b45d5dd4cd98e82ebd5f30bad0c94b", "parents": [ "521cb40b0c44418a4fd36dc633f575813d59a43d" ], "author": { "name": "stigge@antcom.de", "email": "stigge@antcom.de", "time": "Thu Jan 20 18:42:55 2011 +0100" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Mon Mar 14 22:36:24 2011 -0700" }, "message": "hwmon: Driver for Maxim MAX6639\n\n2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller\n\nSigned-off-by: Roland Stigge \u003cstigge@antcom.de\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "0a0d128d023a49eb8afa0e988e6773416318a0b5", "tree": "962c97cdb12a32d2774f4f302803ac60b05d3bd9", "parents": [ "6a58baf8f222f60cded29770ff9a0f6f6c100b64" ], "author": { "name": "Ilkka Koskinen", "email": "ilkka.koskinen@nokia.com", "time": "Wed Mar 02 13:24:06 2011 +0000" }, "committer": { "name": "Tony Lindgren", "email": "tony@atomide.com", "time": "Wed Mar 02 17:01:14 2011 -0800" }, "message": "mfd: twl4030_codec: Remove unused and duplicate audio_mclk fields\n\naudio_mclk can be queried from mfd driver. Therefore, it is not\nneeded in twl4030_codec_audio_data or in twl4030_codec_vibra_data\nanymore.\n\nSigned-off-by: Ilkka Koskinen \u003cilkka.koskinen@nokia.com\u003e\nAcked-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nAcked-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nSigned-off-by: Tony Lindgren \u003ctony@atomide.com\u003e\n" }, { "commit": "adf779c1ee1d5556ebd83e39a7189022d4ebce3a", "tree": "add454348d5a2eca573fa6751fb20d576a5bce8e", "parents": [ "5ad567ffbaf208bd35bff4341906346c1a1d4574" ], "author": { "name": "Heungjun Kim", "email": "riverful.kim@samsung.com", "time": "Wed Feb 23 21:40:11 2011 -0800" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Wed Feb 23 21:43:31 2011 -0800" }, "message": "Input: mcs_touchkey - add support for suspend/resume\n\nThis adds support for system-level suspend/resume to the driver.\n\nSigned-off-by: Heungjun Kim \u003criverful.kim@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "919ed895f0b4227da26ea1b0a1347db5010f105e", "tree": "eb81c0ee83be2171b831412460258027884c2a02", "parents": [ "71749f5c66e797a39600dae9de58aab3858dc488" ], "author": { "name": "Iiro Valkonen", "email": "iiro.valkonen@atmel.com", "time": "Tue Feb 15 13:36:52 2011 -0800" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Mon Feb 21 01:02:34 2011 -0800" }, "message": "Input: atmel_mxt_ts - allow board code to specify IRQ flags\n\nDifferent board have different requirements/setups so let\u0027s be more\nflexible.\n\nSigned-off-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "71749f5c66e797a39600dae9de58aab3858dc488", "tree": "dfb7593588c36288e3bbbae68a5ca22ac62c255b", "parents": [ "46ee2a05a466ca7e34d65fe3feba195d62109362" ], "author": { "name": "Iiro Valkonen", "email": "iiro.valkonen@atmel.com", "time": "Tue Feb 15 13:36:52 2011 -0800" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Mon Feb 21 01:02:33 2011 -0800" }, "message": "Input: atmel_mxt_ts - allow board code to suppliy controller config\n\nAs there is no common configuration settings that would work in every\nsituation, remove the fixed config data from driver code and add\nconfig data to platform data.\n\nSigned-off-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "7686b108d8ef5c32f429d5228798636f3a1caf5a", "tree": "0adce74109f9779e517dcd1a3b2601358bc37b61", "parents": [ "964de52147c2842092642512e6f654fc2ab51408" ], "author": { "name": "Iiro Valkonen", "email": "iiro.valkonen@atmel.com", "time": "Wed Feb 02 23:21:58 2011 -0800" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Mon Feb 21 01:02:27 2011 -0800" }, "message": "Input: atmel_mxt_ts - get rid of qt602240 prefixes in names\n\nChange prefixes from qt602240 to mxt to reflect that the driver supports\nwhole line of mXT touchscreens.\n\nSigned-off-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "964de52147c2842092642512e6f654fc2ab51408", "tree": "709284f85ce341b0b99c3297d71678335f7b9354", "parents": [ "2546bcc2d64c3bd0e7cb802cb8fc6cf757c6be0b" ], "author": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Wed Feb 02 23:21:58 2011 -0800" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Mon Feb 21 01:02:26 2011 -0800" }, "message": "Input: qt602240_ts - rename to atmel_mxt_ts\n\nSince the driver will be supporting whole range of Atmels mXT touchscreen\ncontrollers we better rename it to atmel_mxt_ts.\n\nAcked-by: Iiro Valkonen \u003ciiro.valkonen@atmel.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "d8692748408fbec28dfb065f4127307e24187476", "tree": "97a488ea790100e06a23c3d601b535445ac0548d", "parents": [ "31e9992ab09264ed1372ba86a0924899ab08700b" ], "author": { "name": "Hema HK", "email": "hemahk@ti.com", "time": "Thu Feb 17 12:06:06 2011 +0530" }, "committer": { "name": "Felipe Balbi", "email": "balbi@ti.com", "time": "Thu Feb 17 21:11:46 2011 +0200" }, "message": "usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data\n\nDeclare the .phy_suspend function pointer to twl4030_usb_data structure.\nOMAP internal phy suspend function will be hooked though this function\npointer to use in the transceiver driver.\n\nSigned-off-by: Hema HK \u003chemahk@ti.com\u003e\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nCc: Paul Walmsley \u003cpaul@pwsan.com\u003e\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n" }, { "commit": "6099469805c24af14250e182bb9ca082b8a6b716", "tree": "9b08dd1a10ff89f2557575f5bf95b07babf92beb", "parents": [ "430400b86304ea729ba10f2966a8af67da60a37f" ], "author": { "name": "Roland Stigge", "email": "stigge@antcom.de", "time": "Sun Jan 09 09:31:39 2011 -0500" }, "committer": { "name": "Guenter Roeck", "email": "guenter.roeck@ericsson.com", "time": "Sun Jan 09 09:10:10 2011 -0800" }, "message": "hwmon: Support for Dallas Semiconductor DS620\n\nDriver for Dallas Semiconductor DS620 temperature sensor and thermostat\n\nSigned-off-by: Roland Stigge \u003cstigge@antcom.de\u003e\nSigned-off-by: Guenter Roeck \u003cguenter.roeck@ericsson.com\u003e\n" }, { "commit": "36facadd9ea98f8415d0dbb63e0763b7ee9d3911", "tree": "99dea00b332ed852f2b0a4923b581dd723f03634", "parents": [ "2faa83e2a519abea1055d156ce1b42b8fa57e87b", "0b83ae960cd7d4a5ee02786ecf41ab45688999bf" ], "author": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Dec 16 10:05:06 2010 -0800" }, "committer": { "name": "Greg Kroah-Hartman", "email": "gregkh@suse.de", "time": "Thu Dec 16 10:05:06 2010 -0800" }, "message": "Merge branch \u0027usb-next\u0027 into musb-merge\n\n* usb-next: (132 commits)\n USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path\n USB: uas: Ensure we only bind to a UAS interface\n USB: uas: Rename sense pipe and sense urb to status pipe and status urb\n USB: uas: Use kzalloc instead of kmalloc\n USB: uas: Fix up the Sense IU\n usb: musb: core: kill unneeded #include\u0027s\n DA8xx: assign name to MUSB IRQ resource\n usb: gadget: g_ncm added\n usb: gadget: f_ncm.c added\n usb: gadget: u_ether: prepare for NCM\n usb: pch_udc: Fix setup transfers with data out\n usb: pch_udc: Fix compile error, warnings and checkpatch warnings\n usb: add ab8500 usb transceiver driver\n USB: gadget: Implement runtime PM for MSM bus glue driver\n USB: gadget: Implement runtime PM for ci13xxx gadget\n USB: gadget: Add USB controller driver for MSM SoC\n USB: gadget: Introduce ci13xxx_udc_driver struct\n USB: gadget: Initialize ci13xxx gadget device\u0027s coherent DMA mask\n USB: gadget: Fix \"scheduling while atomic\" bugs in ci13xxx_udc\n USB: gadget: Separate out PCI bus code from ci13xxx_udc\n ...\n" }, { "commit": "e70357e35c522776d9f56f6800af4ed7a5bdbaaf", "tree": "bb002bfcf01d284e036535e4476e616102d604c3", "parents": [ "4c42fbc99fc8656efc7d2b5e92be0d430ccefdc6" ], "author": { "name": "Hema HK", "email": "hemahk@ti.com", "time": "Fri Dec 10 18:09:52 2010 +0530" }, "committer": { "name": "Felipe Balbi", "email": "balbi@ti.com", "time": "Fri Dec 10 14:46:51 2010 +0200" }, "message": "mfd: TWL6030: OMAP4: Registering the TWL6030-usb device\n\nRegistering the twl6030-usb transceiver device as a child to twl6030 core.\nRemoved the NOP transceiver init call from board file.\n\nPopulated twl4030_usb_data platform data structure with the function\npointers for OMAP4430 internal PHY operation to be used by twl630-usb driver.\n\nSigned-off-by: Hema HK \u003chemahk@ti.com\u003e\nCc: Samuel Ortiz \u003csameo@linux.intel.com\u003e\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nSigned-off-by: Felipe Balbi \u003cbalbi@ti.com\u003e\n" }, { "commit": "95716c0decb2ed3ff94998b6390cc8f8d6d1e748", "tree": "ba6de8cf9685538c39dde6402fdf313fa2de0440", "parents": [ "c8ddb2713c624f432fa5fe3c7ecffcdda46ea0d4" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Tue Nov 02 11:33:05 2010 -0700" }, "committer": { "name": "Dmitry Torokhov", "email": "dmitry.torokhov@gmail.com", "time": "Wed Nov 03 10:44:20 2010 -0700" }, "message": "Input: adp5588-keys - unify common header defines\n\nUnify adp5588-gpio and adp5588-keys common header defines (as per Andrew\nMorton request). For consistency, move remaining defines and prefix\naccordingly.\n\nNo functional changes.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Dmitry Torokhov \u003cdtor@mail.ru\u003e\n" }, { "commit": "72f2e2c763edc41f8eead042b6ff933acb0378e2", "tree": "b31ca0ae6be04e9191fdd99fa157c9ec4b4598a2", "parents": [ "8e00593557c3c5a7bc6f636412a1cadcf4624232" ], "author": { "name": "kishore kadiyala", "email": "kishore.kadiyala@ti.com", "time": "Fri Sep 24 17:13:20 2010 +0000" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:29:59 2010 +0200" }, "message": "mfd: Adding twl6030 mmc card detect support for MMC1\n\nAdding card detect callback function and card detect configuration\nfunction for MMC1 Controller on OMAP4.\n\nCard detect configuration function does initial configuration of the\nMMC Control \u0026 PullUp-PullDown registers of Phoenix.\n\nFor MMC1 Controller, card detect interrupt source is\ntwl6030 which is non-gpio. The card detect call back function provides\ncard present/absent status by reading MMC Control register present\non twl6030.\n\nSince OMAP4 doesn\u0027t use any GPIO line as used in OMAP3 for card detect,\nthe suspend/resume initialization which was done in omap_hsmmc_gpio_init\npreviously is moved to the probe thus making it generic for both OMAP3 \u0026\nOMAP4.\n\nCc: Tony Lindgren \u003ctony@atomide.com\u003e\nCc: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nCc: Madhusudhan Chikkature \u003cmadhu.cr@ti.com\u003e\nCc: Adrian Hunter \u003cadrian.hunter@nokia.com\u003e\nSigned-off-by: Kishore Kadiyala \u003ckishore.kadiyala@ti.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "89712059c09ff12f1e60e444d05d2ca257dd00ef", "tree": "9292c3ede7afb1644a2b3b92fbc5cbf5e9bcfd6d", "parents": [ "f8539ddcbbbca7b6a06e0c2cdfbd116ba43a2fe0" ], "author": { "name": "Felipe Balbi", "email": "felipe.balbi@nokia.com", "time": "Fri Sep 10 17:10:21 2010 +0200" }, "committer": { "name": "Samuel Ortiz", "email": "sameo@linux.intel.com", "time": "Fri Oct 29 00:28:47 2010 +0200" }, "message": "i2c: twl: add register defines for pm master module\n\nSome modules already need to talk to at least PROTECT_KEY\nregister, while at that, add defines to the entire register\nspace.\n\nSigned-off-by: Felipe Balbi \u003cfelipe.balbi@nokia.com\u003e\nSigned-off-by: Samuel Ortiz \u003csameo@linux.intel.com\u003e\n" }, { "commit": "dc5ae4f2f58cfa98b67d2be379fc99080a8967af", "tree": "8ef3cd48b98d21fc1a23b446d55769497c0c0667", "parents": [ "9ef8c8c51a7d76bae73e0259c356b24533b6b7c0" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Wed Oct 27 15:33:20 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Oct 27 18:03:07 2010 -0700" }, "message": "gpio: adp5588-gpio: add i2c forward declaration\n\nSome ADP5588 functions take a pointer to an i2c_client, but if the i2c\nheader doesn\u0027t happen to be included first, we hit the standard \"struct\ndeclared inside parameter list\" warnings from gcc. So add a simple\nforward decl of the i2c_client struct.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "9ef8c8c51a7d76bae73e0259c356b24533b6b7c0", "tree": "7dc3a50966ed68cf1980a86729a476521838e0e1", "parents": [ "459773ae8dbbd480886d186181c6bc2e8556025f" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Wed Oct 27 15:33:20 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Oct 27 18:03:07 2010 -0700" }, "message": "gpio: adp5588-gpio: gpio_start must be signed\n\nCommon code interprets this as a signed value (a negative value is used to\nrequest dynamic ID allocation), so make sure the platform data has proper\ntypes to support that.\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "459773ae8dbbd480886d186181c6bc2e8556025f", "tree": "38d738b858105a46a473bcae0958e2ded77a2e21", "parents": [ "ead6db084392349ad33323b1bb2916058dd7e82b" ], "author": { "name": "Michael Hennerich", "email": "michael.hennerich@analog.com", "time": "Wed Oct 27 15:33:19 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Wed Oct 27 18:03:07 2010 -0700" }, "message": "gpio: adp5588-gpio: support interrupt controller\n\nImplement irq_chip functionality on ADP5588/5587 GPIO expanders. Only\nlevel sensitive interrupts are supported. Interrupts provided by this\nirq_chip must be requested using request_threaded_irq().\n\nSigned-off-by: Michael Hennerich \u003cmichael.hennerich@analog.com\u003e\nSigned-off-by: Mike Frysinger \u003cvapier@gentoo.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "92b1f84d46b24675493d95a239eea2b07e5f13f8", "tree": "d81be3348c30402d623059c86259f83657900a0f", "parents": [ "190420ab34ab4c077c641893ac19f364cf3606e4" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Tue Oct 26 14:22:38 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:14 2010 -0700" }, "message": "drivers/misc: driver for APDS990X ALS and proximity sensors\n\nThis is a driver for Avago APDS990X combined ALS and proximity sensor.\n\nInterface is sysfs based. The driver uses interrupts to provide new data.\nThe driver supports pm_runtime and regulator frameworks.\n\nSee Documentation/misc-devices/apds990x.txt for details\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "190420ab34ab4c077c641893ac19f364cf3606e4", "tree": "202b84214c818dff63eb4a0fe37d87679604d443", "parents": [ "4b068de9ab1c404734fde90ce5d3f4f5b4f0b9d5" ], "author": { "name": "Samu Onkalo", "email": "samu.p.onkalo@nokia.com", "time": "Tue Oct 26 14:22:37 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Tue Oct 26 16:52:14 2010 -0700" }, "message": "drivers/misc: driver for bh1770glc / sfh7770 ALS and proximity sensor\n\nThis is a driver for ROHM BH1770GLC and OSRAM SFH7770 combined ALS and\nproximity sensor.\n\nInterface is sysfs based. The driver uses interrupts to provide new data.\n The driver supports pm_runtime and regulator frameworks.\n\nSee Documentation/misc-devices/bh1770glc.txt for details\n\nSigned-off-by: Samu Onkalo \u003csamu.p.onkalo@nokia.com\u003e\nAcked-by: Jonathan Cameron \u003cjic23@cam.ac.uk\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "aa5c14d5c0d3e4c587db4a1b220b9c86415c538f", "tree": "0114637e8be2b38176e7e91e6cea3501b22cb66a", "parents": [ "79fc84c7e0d2fe89c4e82f3a26fd8b0d13c31703", "b11bdb5254ff17cb63e4ae5088b73fdcd2cc2602" ], "author": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Mon Oct 25 10:00:30 2010 +0200" }, "committer": { "name": "Takashi Iwai", "email": "tiwai@suse.de", "time": "Mon Oct 25 10:00:30 2010 +0200" }, "message": "Merge branch \u0027topic/asoc\u0027 into for-linus\n\nConflicts:\n\tarch/powerpc/platforms/85xx/p1022_ds.c\n" }, { "commit": "5affb607720d734ca572b8a77c5c7d62d3042b6f", "tree": "5c3a675bef03570958fc4e9baffb318ec7f64e31", "parents": [ "0dcc48c15f63ee86c2fcd33968b08d651f0360a5" ], "author": { "name": "Gregory Bean", "email": "gbean@codeaurora.org", "time": "Thu Sep 09 16:38:02 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Sep 09 18:57:24 2010 -0700" }, "message": "gpio: sx150x: correct and refine reset-on-probe behavior\n\nReplace the arbitrary software-reset call from the device-probe\nmethod, because:\n\n- It is defective. To work correctly, it should be two byte writes,\n not a single word write. As it stands, it does nothing.\n\n- Some devices with sx150x expanders installed have their NRESET pins\n ganged on the same line, so resetting one causes the others to reset -\n not a nice thing to do arbitrarily!\n\n- The probe, usually taking place at boot, implies a recent hard-reset,\n so a software reset at this point is just a waste of energy anyway.\n\nTherefore, make it optional, defaulting to off, as this will match the\ncommon case of probing at powerup and also matches the current broken\nno-op behavior.\n\nSigned-off-by: Gregory Bean \u003cgbean@codeaurora.org\u003e\nReviewed-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\nSigned-off-by: Andrew Morton \u003cakpm@linux-foundation.org\u003e\nSigned-off-by: Linus Torvalds \u003ctorvalds@linux-foundation.org\u003e\n" }, { "commit": "e4862f2f6f5653dfb67f3ba2b6f0bc74516ed51a", "tree": "1db5a0540a4eecfad9b7daee476b985e82ddc810", "parents": [ "ec62dbd7eb8e3dddb221da89ecbcea0fc3dee8c1", "b2c1e07b81a126e5846dfc3d36f559d861df59f4" ], "author": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Aug 16 18:42:58 2010 +0100" }, "committer": { "name": "Mark Brown", "email": "broonie@opensource.wolfsonmicro.com", "time": "Mon Aug 16 18:42:58 2010 +0100" }, "message": "Merge branch \u0027for-2.6.36\u0027 into for-2.6.37\n\nFairly simple conflicts, the most serious ones are the i.MX ones which I\nsuspect now need another rename.\n\nConflicts:\n\tarch/arm/mach-mx2/clock_imx27.c\n\tarch/arm/mach-mx2/devices.c\n\tarch/arm/mach-omap2/board-rx51-peripherals.c\n\tarch/arm/mach-omap2/board-zoom2.c\n\tsound/soc/fsl/mpc5200_dma.c\n\tsound/soc/fsl/mpc5200_dma.h\n\tsound/soc/fsl/mpc8610_hpcd.c\n\tsound/soc/pxa/spitz.c\n" }, { "commit": "5950ec8d3e47a08ec0b678a0e0ba5d1b9b62dd8e", "tree": "8cac7d3dadf50be14b2ac0441e61ecd8935f27e0", "parents": [ "b9783dcebe952bf73449fe70a19ee4814adc81a0" ], "author": { "name": "Ira W. Snyder", "email": "iws@ovro.caltech.edu", "time": "Sat Aug 14 21:08:49 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Sat Aug 14 21:08:49 2010 +0200" }, "message": "hwmon: (ltc4245) Expose all GPIO pins as analog voltages\n\nAdd support for exposing all GPIO pins as analog voltages. Though this is\nnot an ideal use of the chip, some hardware engineers may decide that the\nLTC4245 meets their design requirements when studying the datasheet.\n\nThe GPIO pins are sampled in round-robin fashion, meaning that a slow\nreader will see stale data. A userspace application can detect this,\nbecause it will get -EAGAIN when reading from a sysfs file which contains\nstale data.\n\nUsers can choose to use this feature on a per-chip basis by using either\nplatform data or the OF device tree (where applicable).\n\nSigned-off-by: Ira W. Snyder \u003ciws@ovro.caltech.edu\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" }, { "commit": "1c00650c233c404fadf9347329214d55283bd17a", "tree": "9de7cda2fe2e54411cc24ff3befd758c9cb9cd74", "parents": [ "26df0766a73a859bb93dc58e747c5028557a23fd", "7f528135da9704d67db1f727162024b078e1cd8f" ], "author": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Aug 12 10:06:29 2010 -0700" }, "committer": { "name": "Linus Torvalds", "email": "torvalds@linux-foundation.org", "time": "Thu Aug 12 10:06:29 2010 -0700" }, "message": "Merge branch \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging\n\n* \u0027i2c-for-linus\u0027 of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:\n i2c: I2C bus multiplexer driver pca954x\n i2c: Multiplexed I2C bus core support\n i2c: Use a separate mutex for userspace client lists\n i2c: Make i2c_default_probe self-sufficient\n i2c: Drop dummy variable\n i2c: Move adapter locking helpers to i2c-core\n V4L/DVB: Use custom I2C probing function mechanism\n i2c: Add support for custom probe function\n i2c-dev: Use memdup_user\n i2c-dev: Remove unnecessary kmalloc casts\n" }, { "commit": "f0fba2ad1b6b53d5360125c41953b7afcd6deff0", "tree": "f6ad50905f8daa616593c978d7ae992e73241180", "parents": [ "bda7d2a862e6b788bca2d02d38a07966a9c92e48" ], "author": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Wed Mar 17 20:15:21 2010 +0000" }, "committer": { "name": "Liam Girdwood", "email": "lrg@slimlogic.co.uk", "time": "Thu Aug 12 14:00:00 2010 +0100" }, "message": "ASoC: multi-component - ASoC Multi-Component Support\n\nThis patch extends the ASoC API to allow sound cards to have more than one\nCODEC and more than one platform DMA controller. This is achieved by dividing\nsome current ASoC structures that contain both driver data and device data into\nstructures that only either contain device data or driver data. i.e.\n\n struct snd_soc_codec ---\u003e struct snd_soc_codec (device data)\n +-\u003e struct snd_soc_codec_driver (driver data)\n\n struct snd_soc_platform ---\u003e struct snd_soc_platform (device data)\n +-\u003e struct snd_soc_platform_driver (driver data)\n\n struct snd_soc_dai ---\u003e struct snd_soc_dai (device data)\n +-\u003e struct snd_soc_dai_driver (driver data)\n\n struct snd_soc_device ---\u003e deleted\n\nThis now allows ASoC to be more tightly aligned with the Linux driver model and\nalso means that every ASoC codec, platform and (platform) DAI is a kernel\ndevice. ASoC component private data is now stored as device private data.\n\nThe ASoC sound card struct snd_soc_card has also been updated to store lists\nof it\u0027s components rather than a pointer to a codec and platform. The PCM\nruntime struct soc_pcm_runtime now has pointers to all its components.\n\nThis patch adds DAPM support for ASoC multi-component and removes struct\nsnd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec\nor runtime PCM level basis rather than using snd_soc_socdev.\n\nOther notable multi-component changes:-\n\n * Stream operations now de-reference less structures.\n * close_delayed work() now runs on a DAI basis rather than looping all DAIs\n in a card.\n * PM suspend()/resume() operations can now handle N CODECs and Platforms\n per sound card.\n * Added soc_bind_dai_link() to bind the component devices to the sound card.\n * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove\n DAI link components.\n * sysfs entries can now be registered per component per card.\n * snd_soc_new_pcms() functionailty rolled into dai_link_probe().\n * snd_soc_register_codec() now does all the codec list and mutex init.\n\nThis patch changes the probe() and remove() of the CODEC drivers as follows:-\n\n o Make CODEC driver a platform driver\n o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core.\n o Removed all static codec pointers (drivers now support \u003e 1 codec dev)\n o snd_soc_register_pcms() now done by core.\n o snd_soc_register_dai() folded into snd_soc_register_codec().\n\nCS4270 portions:\nAcked-by: Timur Tabi \u003ctimur@freescale.com\u003e\n\nSome TLV320aic23 and Cirrus platform fixes.\nSigned-off-by: Ryan Mallon \u003cryan@bluewatersys.com\u003e\n\nTI CODEC and OMAP fixes\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nSigned-off-by: Janusz Krzysztofik \u003cjkrzyszt@tis.icnet.pl\u003e\nSigned-off-by: Jarkko Nikula \u003cjhnikula@gmail.com\u003e\n\nSamsung platform and misc fixes :-\nSigned-off-by: Chanwoo Choi \u003ccw00.choi@samsung.com\u003e\nSigned-off-by: Joonyoung Shim \u003cjy0922.shim@samsung.com\u003e\nSigned-off-by: Kyungmin Park \u003ckyungmin.park@samsung.com\u003e\nReviewed-by: Jassi Brar \u003cjassi.brar@samsung.com\u003e\nSigned-off-by: Seungwhan Youn \u003csw.youn@samsung.com\u003e\n\nMPC8610 and PPC fixes.\nSigned-off-by: Timur Tabi \u003ctimur@freescale.com\u003e\n\ni.MX fixes and some core fixes.\nSigned-off-by: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\n\nJ4740 platform fixes:-\nSigned-off-by: Lars-Peter Clausen \u003clars@metafoo.de\u003e\n\nCC: Tony Lindgren \u003ctony@atomide.com\u003e\nCC: Nicolas Ferre \u003cnicolas.ferre@atmel.com\u003e\nCC: Kevin Hilman \u003ckhilman@deeprootsystems.com\u003e\nCC: Sascha Hauer \u003cs.hauer@pengutronix.de\u003e\nCC: Atsushi Nemoto \u003canemo@mba.ocn.ne.jp\u003e\nCC: Kuninori Morimoto \u003cmorimoto.kuninori@renesas.com\u003e\nCC: Daniel Gloeckner \u003cdg@emlix.com\u003e\nCC: Manuel Lauss \u003cmano@roarinelk.homelinux.net\u003e\nCC: Mike Frysinger \u003cvapier.adi@gmail.com\u003e\nCC: Arnaud Patard \u003capatard@mandriva.com\u003e\nCC: Wan ZongShun \u003cmcuos.com@gmail.com\u003e\n\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n" }, { "commit": "7f528135da9704d67db1f727162024b078e1cd8f", "tree": "53261ac3cdfbbac4a727843b72453a6f7f1cb080", "parents": [ "0826374bff57411d239f2fcb15da3c35af0a93cd" ], "author": { "name": "Michael Lawnick", "email": "ml.lawnick@gmx.de", "time": "Wed Aug 11 18:21:03 2010 +0200" }, "committer": { "name": "Jean Delvare", "email": "khali@linux-fr.org", "time": "Wed Aug 11 18:21:03 2010 +0200" }, "message": "i2c: I2C bus multiplexer driver pca954x\n\nI2C driver for PCA954x I2C multiplexer series.\n\nSigned-off-by: Michael Lawnick \u003cml.lawnick@gmx.de\u003e\nAcked-by: Rodolfo Giometti \u003cgiometti@linux.it\u003e\nSigned-off-by: Jean Delvare \u003ckhali@linux-fr.org\u003e\n" } ], "next": "c34f16b70a52e348a62944fe0d5c7c1eb9ad5b72" }