)]}'
{
  "log": [
    {
      "commit": "93864cf04283eb2899ef13ded472a9f24538303f",
      "tree": "c1823ca8e56f8106d4abe5b75c15aed5b8d62e6e",
      "parents": [
        "1209842af4db98ffd7364ec9cf7d1a59293aa74c"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@ti.com",
        "time": "Tue May 03 18:11:36 2011 +0300"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@ti.com",
        "time": "Wed May 11 16:12:35 2011 +0100"
      },
      "message": "ASoC: tlv320dac33: Update e-mail address\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@ti.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@ti.com\u003e\n"
    },
    {
      "commit": "a577b318fc7cb0c46f9f0cdefb5b267490ff8ce5",
      "tree": "6e2dc8b7f900743cf5cf2b23fa89b34480cec3f8",
      "parents": [
        "f430a27f05d42d26d3e438aa262a92565170573f"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@nokia.com",
        "time": "Wed Jul 28 15:26:55 2010 +0300"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Thu Jul 29 10:21:11 2010 +0100"
      },
      "message": "ASoC: tlv320dac33: Add support for automatic FIFO configuration\n\nPlatform parameter to enable automatic FIFO configuration when\nthe codec is in Mode1 or Mode7 FIFO mode.\nWhen this mode is selected, the controls for changing\nnSample (in Mode1), and UTHR (in Mode7) are not added.\nThe driver configures the FIFO configuration based on\nthe stream\u0027s period size in a way, that every burst will\nread period size of data from the host.\nIn Mode7 we need to use a formula, which gives close enough\naproximation for the burst length from the host point\nof view.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "f430a27f05d42d26d3e438aa262a92565170573f",
      "tree": "f448771488ceeda1aa3488d166d2d9a4302dc2b8",
      "parents": [
        "b93cc9f19bade9e9ddd41958352168dc0d266f48"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@nokia.com",
        "time": "Wed Jul 28 15:26:54 2010 +0300"
      },
      "committer": {
        "name": "Liam Girdwood",
        "email": "lrg@slimlogic.co.uk",
        "time": "Thu Jul 29 10:21:04 2010 +0100"
      },
      "message": "ASoC: tlv320dac33: Revisit the FIFO Mode1 handling\n\nReplace the hardwired latency definition with platform data\nparameter, and simplify the nSample parameter calculation.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nAcked-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\nSigned-off-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\n"
    },
    {
      "commit": "eeb309a8a6ff86ce462e072bc95ecbe85618505e",
      "tree": "efd7344fd7ee5035835351bf5b552335390afee6",
      "parents": [
        "c3746a07f13f8711885fd3909c03477a1b47ab82"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@nokia.com",
        "time": "Thu Mar 11 16:26:22 2010 +0200"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Fri Mar 12 11:12:25 2010 +0000"
      },
      "message": "ASoC: tlv320dac33: Add option for keeping the BCLK running\n\nPlatform data option for the codec to keep the BCLK clock\ncontinuously running in FIFO modes (codec master).\n\nOMAP3 McBSP when in slave mode needs continuous BCLK running\non the serial bus in order to operate correctly.\n\nSince in FIFO mode the DAC33 can also shut down the BCLK clock\nand enable it only when it is needed, let the platforms decide\nif the CPU side needs the BCLK running or not.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    },
    {
      "commit": "6aceabb459c07a3fb4873c8306de8143c56241b2",
      "tree": "438703a97f5d386618b51256ea9b3e9e4793fd70",
      "parents": [
        "6cd6cede8c33364d8e1abb5ea35adf627e3781b0"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@nokia.com",
        "time": "Wed Jan 20 09:39:36 2010 +0200"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Wed Jan 20 11:47:49 2010 +0000"
      },
      "message": "ASoC: tlv320dac33: Burst mode BCLK divider configuration\n\nAdd possibility to configure the burst mode BCLK divider through platform\ndata structure.\nThe BCLK divider changes the actual speed of the serial bus in burst mode,\nwhich is faster than the sampling frequency of the running stream.\nIn this way platforms can experiment with the optimal burst speed without\nthe need to modify the codec driver itself.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nAcked-by: Liam Girdwood \u003clrg@slimlogic.co.uk\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    },
    {
      "commit": "c8bf93f0fe8c5a509a29e30f3bac823fa0f6d96e",
      "tree": "2424eb4912787cafcd1fde38711a945cd23fe104",
      "parents": [
        "640fb39e386a0dac9014e5b8a512de0950e30288"
      ],
      "author": {
        "name": "Peter Ujfalusi",
        "email": "peter.ujfalusi@nokia.com",
        "time": "Thu Oct 15 09:03:56 2009 +0300"
      },
      "committer": {
        "name": "Mark Brown",
        "email": "broonie@opensource.wolfsonmicro.com",
        "time": "Thu Oct 15 15:02:04 2009 +0100"
      },
      "message": "ASoC: Codec driver for Texas Instruments tlv320dac33 codec\n\nDriver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo\naudio DAC.\n\nTLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low\npower audio playback.\n\nThe digital interface can use I2S, DSP (A or B), Right and Left\njustified formats.\nDAC33 has stereo analog input, which can be bypassed to the analog\noutputs.\n\nRegarding to the internal 24KB FIFO the driver implements \u0027FIFO bypass\u0027\nmode (default) and nSample mode (FIFO is in use).\na) In \u0027FIFO bypass\u0027 mode the internal FIFO is not in use, the codec is\nworking synchronously as a normal codec (it needs constant stream of\ndata on the digital interface).\n\nb) The nSample mode implementation uses one interrupt line from DAC33 to\nthe host:\nAlarm threshold is set to 10ms of audio data (limit by the driver\nimplementation).\nDAC33 will signal an interrupt, when the FIFO level goes under the\nAlarm threshold.\nThe host will write to nSample register a value (number of stereo\nsamples), to tell DAC33 how many samples it should read in a burst from\nthe host. When the DAC33 received the number of samples, it disables the\nclocks on the I2S bus. When the FIFO use again goes under the Alarm\nthreshold, DAC33 signals the host with an interrupt, and the process is\nrepeated.\n\nSigned-off-by: Peter Ujfalusi \u003cpeter.ujfalusi@nokia.com\u003e\nSigned-off-by: Mark Brown \u003cbroonie@opensource.wolfsonmicro.com\u003e\n"
    }
  ]
}