[SCSI] lpfc 8.3.19: Add latest SLI4 Hardware initialization support
- Add the Lancer FC and FCoE PCI IDs
- Add new SLI4 INTF register definitions
- Implement new SLI4 doorbell register
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index ec8e8e8..912b595 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1853,6 +1853,14 @@
m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
"Fibre Channel Adapter"};
break;
+ case PCI_DEVICE_ID_LANCER_FC:
+ oneConnect = 1;
+ m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"};
+ break;
+ case PCI_DEVICE_ID_LANCER_FCOE:
+ oneConnect = 1;
+ m = (typeof(m)){"Undefined", "PCIe", "FCoE"};
+ break;
default:
m = (typeof(m)){"Unknown", "", ""};
break;
@@ -3950,7 +3958,7 @@
int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
- int longs;
+ int longs, sli_family;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4012,12 +4020,22 @@
*/
buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
- /* Feature Level 1 hardware is limited to 2 pages */
- if ((bf_get(lpfc_sli_intf_featurelevel1, &phba->sli4_hba.sli_intf) ==
- LPFC_SLI_INTF_FEATURELEVEL1_1))
- max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
- else
- max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+
+ sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
+ max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+ switch (sli_family) {
+ case LPFC_SLI_INTF_FAMILY_BE2:
+ case LPFC_SLI_INTF_FAMILY_BE3:
+ /* There is a single hint for BE - 2 pages per BPL. */
+ if (bf_get(lpfc_sli_intf_sli_hint1, &phba->sli4_hba.sli_intf) ==
+ LPFC_SLI_INTF_SLI_HINT1_1)
+ max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
+ break;
+ case LPFC_SLI_INTF_FAMILY_LNCR_A0:
+ case LPFC_SLI_INTF_FAMILY_LNCR_B0:
+ default:
+ break;
+ }
for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
dma_buf_size < max_buf_size && buf_size > dma_buf_size;
dma_buf_size = dma_buf_size << 1)
@@ -5233,16 +5251,22 @@
&phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_VALID) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
- "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ "IFType=0x%x, SLIHint_1=0x%x, SLIHint_2=0x%x, "
+ "FT=0x%x\n",
bf_get(lpfc_sli_intf_sli_family,
&phba->sli4_hba.sli_intf),
bf_get(lpfc_sli_intf_slirev,
&phba->sli4_hba.sli_intf),
- bf_get(lpfc_sli_intf_featurelevel1,
+ bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf),
- bf_get(lpfc_sli_intf_featurelevel2,
+ bf_get(lpfc_sli_intf_sli_hint1,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_sli_hint2,
+ &phba->sli4_hba.sli_intf),
+ bf_get(lpfc_sli_intf_func_type,
&phba->sli4_hba.sli_intf));
}
+
phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
@@ -8992,6 +9016,10 @@
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BALIUS,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};