| /* | 
 |  *  Copyright (C) 1995  Linus Torvalds | 
 |  * | 
 |  *  Pentium III FXSR, SSE support | 
 |  *	Gareth Hughes <gareth@valinux.com>, May 2000 | 
 |  * | 
 |  *  X86-64 port | 
 |  *	Andi Kleen. | 
 |  * | 
 |  *	CPU hotplug support - ashok.raj@intel.com | 
 |  */ | 
 |  | 
 | /* | 
 |  * This file handles the architecture-dependent parts of process handling.. | 
 |  */ | 
 |  | 
 | #include <linux/stackprotector.h> | 
 | #include <linux/cpu.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/elfcore.h> | 
 | #include <linux/smp.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/user.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/module.h> | 
 | #include <linux/ptrace.h> | 
 | #include <linux/notifier.h> | 
 | #include <linux/kprobes.h> | 
 | #include <linux/kdebug.h> | 
 | #include <linux/tick.h> | 
 | #include <linux/prctl.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/io.h> | 
 | #include <linux/ftrace.h> | 
 |  | 
 | #include <asm/pgtable.h> | 
 | #include <asm/system.h> | 
 | #include <asm/processor.h> | 
 | #include <asm/i387.h> | 
 | #include <asm/mmu_context.h> | 
 | #include <asm/prctl.h> | 
 | #include <asm/desc.h> | 
 | #include <asm/proto.h> | 
 | #include <asm/ia32.h> | 
 | #include <asm/idle.h> | 
 | #include <asm/syscalls.h> | 
 | #include <asm/debugreg.h> | 
 |  | 
 | asmlinkage extern void ret_from_fork(void); | 
 |  | 
 | DEFINE_PER_CPU(unsigned long, old_rsp); | 
 | static DEFINE_PER_CPU(unsigned char, is_idle); | 
 |  | 
 | static ATOMIC_NOTIFIER_HEAD(idle_notifier); | 
 |  | 
 | void idle_notifier_register(struct notifier_block *n) | 
 | { | 
 | 	atomic_notifier_chain_register(&idle_notifier, n); | 
 | } | 
 | EXPORT_SYMBOL_GPL(idle_notifier_register); | 
 |  | 
 | void idle_notifier_unregister(struct notifier_block *n) | 
 | { | 
 | 	atomic_notifier_chain_unregister(&idle_notifier, n); | 
 | } | 
 | EXPORT_SYMBOL_GPL(idle_notifier_unregister); | 
 |  | 
 | void enter_idle(void) | 
 | { | 
 | 	percpu_write(is_idle, 1); | 
 | 	atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); | 
 | } | 
 |  | 
 | static void __exit_idle(void) | 
 | { | 
 | 	if (x86_test_and_clear_bit_percpu(0, is_idle) == 0) | 
 | 		return; | 
 | 	atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); | 
 | } | 
 |  | 
 | /* Called from interrupts to signify idle end */ | 
 | void exit_idle(void) | 
 | { | 
 | 	/* idle loop has pid 0 */ | 
 | 	if (current->pid) | 
 | 		return; | 
 | 	__exit_idle(); | 
 | } | 
 |  | 
 | #ifndef CONFIG_SMP | 
 | static inline void play_dead(void) | 
 | { | 
 | 	BUG(); | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  * The idle thread. There's no useful work to be | 
 |  * done, so just try to conserve power and have a | 
 |  * low exit latency (ie sit in a loop waiting for | 
 |  * somebody to say that they'd like to reschedule) | 
 |  */ | 
 | void cpu_idle(void) | 
 | { | 
 | 	current_thread_info()->status |= TS_POLLING; | 
 |  | 
 | 	/* | 
 | 	 * If we're the non-boot CPU, nothing set the stack canary up | 
 | 	 * for us.  CPU0 already has it initialized but no harm in | 
 | 	 * doing it again.  This is a good place for updating it, as | 
 | 	 * we wont ever return from this function (so the invalid | 
 | 	 * canaries already on the stack wont ever trigger). | 
 | 	 */ | 
 | 	boot_init_stack_canary(); | 
 |  | 
 | 	/* endless idle loop with no priority at all */ | 
 | 	while (1) { | 
 | 		tick_nohz_stop_sched_tick(1); | 
 | 		while (!need_resched()) { | 
 |  | 
 | 			rmb(); | 
 |  | 
 | 			if (cpu_is_offline(smp_processor_id())) | 
 | 				play_dead(); | 
 | 			/* | 
 | 			 * Idle routines should keep interrupts disabled | 
 | 			 * from here on, until they go to idle. | 
 | 			 * Otherwise, idle callbacks can misfire. | 
 | 			 */ | 
 | 			local_irq_disable(); | 
 | 			enter_idle(); | 
 | 			/* Don't trace irqs off for idle */ | 
 | 			stop_critical_timings(); | 
 | 			pm_idle(); | 
 | 			start_critical_timings(); | 
 |  | 
 | 			/* In many cases the interrupt that ended idle | 
 | 			   has already called exit_idle. But some idle | 
 | 			   loops can be woken up without interrupt. */ | 
 | 			__exit_idle(); | 
 | 		} | 
 |  | 
 | 		tick_nohz_restart_sched_tick(); | 
 | 		preempt_enable_no_resched(); | 
 | 		schedule(); | 
 | 		preempt_disable(); | 
 | 	} | 
 | } | 
 |  | 
 | /* Prints also some state that isn't saved in the pt_regs */ | 
 | void __show_regs(struct pt_regs *regs, int all) | 
 | { | 
 | 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs; | 
 | 	unsigned long d0, d1, d2, d3, d6, d7; | 
 | 	unsigned int fsindex, gsindex; | 
 | 	unsigned int ds, cs, es; | 
 |  | 
 | 	show_regs_common(); | 
 | 	printk(KERN_DEFAULT "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); | 
 | 	printk_address(regs->ip, 1); | 
 | 	printk(KERN_DEFAULT "RSP: %04lx:%016lx  EFLAGS: %08lx\n", regs->ss, | 
 | 			regs->sp, regs->flags); | 
 | 	printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n", | 
 | 	       regs->ax, regs->bx, regs->cx); | 
 | 	printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n", | 
 | 	       regs->dx, regs->si, regs->di); | 
 | 	printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n", | 
 | 	       regs->bp, regs->r8, regs->r9); | 
 | 	printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n", | 
 | 	       regs->r10, regs->r11, regs->r12); | 
 | 	printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n", | 
 | 	       regs->r13, regs->r14, regs->r15); | 
 |  | 
 | 	asm("movl %%ds,%0" : "=r" (ds)); | 
 | 	asm("movl %%cs,%0" : "=r" (cs)); | 
 | 	asm("movl %%es,%0" : "=r" (es)); | 
 | 	asm("movl %%fs,%0" : "=r" (fsindex)); | 
 | 	asm("movl %%gs,%0" : "=r" (gsindex)); | 
 |  | 
 | 	rdmsrl(MSR_FS_BASE, fs); | 
 | 	rdmsrl(MSR_GS_BASE, gs); | 
 | 	rdmsrl(MSR_KERNEL_GS_BASE, shadowgs); | 
 |  | 
 | 	if (!all) | 
 | 		return; | 
 |  | 
 | 	cr0 = read_cr0(); | 
 | 	cr2 = read_cr2(); | 
 | 	cr3 = read_cr3(); | 
 | 	cr4 = read_cr4(); | 
 |  | 
 | 	printk(KERN_DEFAULT "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n", | 
 | 	       fs, fsindex, gs, gsindex, shadowgs); | 
 | 	printk(KERN_DEFAULT "CS:  %04x DS: %04x ES: %04x CR0: %016lx\n", cs, ds, | 
 | 			es, cr0); | 
 | 	printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3, | 
 | 			cr4); | 
 |  | 
 | 	get_debugreg(d0, 0); | 
 | 	get_debugreg(d1, 1); | 
 | 	get_debugreg(d2, 2); | 
 | 	printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n", d0, d1, d2); | 
 | 	get_debugreg(d3, 3); | 
 | 	get_debugreg(d6, 6); | 
 | 	get_debugreg(d7, 7); | 
 | 	printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n", d3, d6, d7); | 
 | } | 
 |  | 
 | void release_thread(struct task_struct *dead_task) | 
 | { | 
 | 	if (dead_task->mm) { | 
 | 		if (dead_task->mm->context.size) { | 
 | 			printk("WARNING: dead process %8s still has LDT? <%p/%d>\n", | 
 | 					dead_task->comm, | 
 | 					dead_task->mm->context.ldt, | 
 | 					dead_task->mm->context.size); | 
 | 			BUG(); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static inline void set_32bit_tls(struct task_struct *t, int tls, u32 addr) | 
 | { | 
 | 	struct user_desc ud = { | 
 | 		.base_addr = addr, | 
 | 		.limit = 0xfffff, | 
 | 		.seg_32bit = 1, | 
 | 		.limit_in_pages = 1, | 
 | 		.useable = 1, | 
 | 	}; | 
 | 	struct desc_struct *desc = t->thread.tls_array; | 
 | 	desc += tls; | 
 | 	fill_ldt(desc, &ud); | 
 | } | 
 |  | 
 | static inline u32 read_32bit_tls(struct task_struct *t, int tls) | 
 | { | 
 | 	return get_desc_base(&t->thread.tls_array[tls]); | 
 | } | 
 |  | 
 | /* | 
 |  * This gets called before we allocate a new thread and copy | 
 |  * the current task into it. | 
 |  */ | 
 | void prepare_to_copy(struct task_struct *tsk) | 
 | { | 
 | 	unlazy_fpu(tsk); | 
 | } | 
 |  | 
 | int copy_thread(unsigned long clone_flags, unsigned long sp, | 
 | 		unsigned long unused, | 
 | 	struct task_struct *p, struct pt_regs *regs) | 
 | { | 
 | 	int err; | 
 | 	struct pt_regs *childregs; | 
 | 	struct task_struct *me = current; | 
 |  | 
 | 	childregs = ((struct pt_regs *) | 
 | 			(THREAD_SIZE + task_stack_page(p))) - 1; | 
 | 	*childregs = *regs; | 
 |  | 
 | 	childregs->ax = 0; | 
 | 	if (user_mode(regs)) | 
 | 		childregs->sp = sp; | 
 | 	else | 
 | 		childregs->sp = (unsigned long)childregs; | 
 |  | 
 | 	p->thread.sp = (unsigned long) childregs; | 
 | 	p->thread.sp0 = (unsigned long) (childregs+1); | 
 | 	p->thread.usersp = me->thread.usersp; | 
 |  | 
 | 	set_tsk_thread_flag(p, TIF_FORK); | 
 |  | 
 | 	p->thread.io_bitmap_ptr = NULL; | 
 |  | 
 | 	savesegment(gs, p->thread.gsindex); | 
 | 	p->thread.gs = p->thread.gsindex ? 0 : me->thread.gs; | 
 | 	savesegment(fs, p->thread.fsindex); | 
 | 	p->thread.fs = p->thread.fsindex ? 0 : me->thread.fs; | 
 | 	savesegment(es, p->thread.es); | 
 | 	savesegment(ds, p->thread.ds); | 
 |  | 
 | 	err = -ENOMEM; | 
 | 	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps)); | 
 |  | 
 | 	if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) { | 
 | 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL); | 
 | 		if (!p->thread.io_bitmap_ptr) { | 
 | 			p->thread.io_bitmap_max = 0; | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 		memcpy(p->thread.io_bitmap_ptr, me->thread.io_bitmap_ptr, | 
 | 				IO_BITMAP_BYTES); | 
 | 		set_tsk_thread_flag(p, TIF_IO_BITMAP); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Set a new TLS for the child thread? | 
 | 	 */ | 
 | 	if (clone_flags & CLONE_SETTLS) { | 
 | #ifdef CONFIG_IA32_EMULATION | 
 | 		if (test_thread_flag(TIF_IA32)) | 
 | 			err = do_set_thread_area(p, -1, | 
 | 				(struct user_desc __user *)childregs->si, 0); | 
 | 		else | 
 | #endif | 
 | 			err = do_arch_prctl(p, ARCH_SET_FS, childregs->r8); | 
 | 		if (err) | 
 | 			goto out; | 
 | 	} | 
 | 	err = 0; | 
 | out: | 
 | 	if (err && p->thread.io_bitmap_ptr) { | 
 | 		kfree(p->thread.io_bitmap_ptr); | 
 | 		p->thread.io_bitmap_max = 0; | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static void | 
 | start_thread_common(struct pt_regs *regs, unsigned long new_ip, | 
 | 		    unsigned long new_sp, | 
 | 		    unsigned int _cs, unsigned int _ss, unsigned int _ds) | 
 | { | 
 | 	loadsegment(fs, 0); | 
 | 	loadsegment(es, _ds); | 
 | 	loadsegment(ds, _ds); | 
 | 	load_gs_index(0); | 
 | 	regs->ip		= new_ip; | 
 | 	regs->sp		= new_sp; | 
 | 	percpu_write(old_rsp, new_sp); | 
 | 	regs->cs		= _cs; | 
 | 	regs->ss		= _ss; | 
 | 	regs->flags		= X86_EFLAGS_IF; | 
 | 	set_fs(USER_DS); | 
 | 	/* | 
 | 	 * Free the old FP and other extended state | 
 | 	 */ | 
 | 	free_thread_xstate(current); | 
 | } | 
 |  | 
 | void | 
 | start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) | 
 | { | 
 | 	start_thread_common(regs, new_ip, new_sp, | 
 | 			    __USER_CS, __USER_DS, 0); | 
 | } | 
 |  | 
 | #ifdef CONFIG_IA32_EMULATION | 
 | void start_thread_ia32(struct pt_regs *regs, u32 new_ip, u32 new_sp) | 
 | { | 
 | 	start_thread_common(regs, new_ip, new_sp, | 
 | 			    __USER32_CS, __USER32_DS, __USER32_DS); | 
 | } | 
 | #endif | 
 |  | 
 | /* | 
 |  *	switch_to(x,y) should switch tasks from x to y. | 
 |  * | 
 |  * This could still be optimized: | 
 |  * - fold all the options into a flag word and test it with a single test. | 
 |  * - could test fs/gs bitsliced | 
 |  * | 
 |  * Kprobes not supported here. Set the probe on schedule instead. | 
 |  * Function graph tracer not supported too. | 
 |  */ | 
 | __notrace_funcgraph struct task_struct * | 
 | __switch_to(struct task_struct *prev_p, struct task_struct *next_p) | 
 | { | 
 | 	struct thread_struct *prev = &prev_p->thread; | 
 | 	struct thread_struct *next = &next_p->thread; | 
 | 	int cpu = smp_processor_id(); | 
 | 	struct tss_struct *tss = &per_cpu(init_tss, cpu); | 
 | 	unsigned fsindex, gsindex; | 
 | 	bool preload_fpu; | 
 |  | 
 | 	/* | 
 | 	 * If the task has used fpu the last 5 timeslices, just do a full | 
 | 	 * restore of the math state immediately to avoid the trap; the | 
 | 	 * chances of needing FPU soon are obviously high now | 
 | 	 */ | 
 | 	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5; | 
 |  | 
 | 	/* we're going to use this soon, after a few expensive things */ | 
 | 	if (preload_fpu) | 
 | 		prefetch(next->fpu.state); | 
 |  | 
 | 	/* | 
 | 	 * Reload esp0, LDT and the page table pointer: | 
 | 	 */ | 
 | 	load_sp0(tss, next); | 
 |  | 
 | 	/* | 
 | 	 * Switch DS and ES. | 
 | 	 * This won't pick up thread selector changes, but I guess that is ok. | 
 | 	 */ | 
 | 	savesegment(es, prev->es); | 
 | 	if (unlikely(next->es | prev->es)) | 
 | 		loadsegment(es, next->es); | 
 |  | 
 | 	savesegment(ds, prev->ds); | 
 | 	if (unlikely(next->ds | prev->ds)) | 
 | 		loadsegment(ds, next->ds); | 
 |  | 
 |  | 
 | 	/* We must save %fs and %gs before load_TLS() because | 
 | 	 * %fs and %gs may be cleared by load_TLS(). | 
 | 	 * | 
 | 	 * (e.g. xen_load_tls()) | 
 | 	 */ | 
 | 	savesegment(fs, fsindex); | 
 | 	savesegment(gs, gsindex); | 
 |  | 
 | 	load_TLS(next, cpu); | 
 |  | 
 | 	/* Must be after DS reload */ | 
 | 	__unlazy_fpu(prev_p); | 
 |  | 
 | 	/* Make sure cpu is ready for new context */ | 
 | 	if (preload_fpu) | 
 | 		clts(); | 
 |  | 
 | 	/* | 
 | 	 * Leave lazy mode, flushing any hypercalls made here. | 
 | 	 * This must be done before restoring TLS segments so | 
 | 	 * the GDT and LDT are properly updated, and must be | 
 | 	 * done before math_state_restore, so the TS bit is up | 
 | 	 * to date. | 
 | 	 */ | 
 | 	arch_end_context_switch(next_p); | 
 |  | 
 | 	/* | 
 | 	 * Switch FS and GS. | 
 | 	 * | 
 | 	 * Segment register != 0 always requires a reload.  Also | 
 | 	 * reload when it has changed.  When prev process used 64bit | 
 | 	 * base always reload to avoid an information leak. | 
 | 	 */ | 
 | 	if (unlikely(fsindex | next->fsindex | prev->fs)) { | 
 | 		loadsegment(fs, next->fsindex); | 
 | 		/* | 
 | 		 * Check if the user used a selector != 0; if yes | 
 | 		 *  clear 64bit base, since overloaded base is always | 
 | 		 *  mapped to the Null selector | 
 | 		 */ | 
 | 		if (fsindex) | 
 | 			prev->fs = 0; | 
 | 	} | 
 | 	/* when next process has a 64bit base use it */ | 
 | 	if (next->fs) | 
 | 		wrmsrl(MSR_FS_BASE, next->fs); | 
 | 	prev->fsindex = fsindex; | 
 |  | 
 | 	if (unlikely(gsindex | next->gsindex | prev->gs)) { | 
 | 		load_gs_index(next->gsindex); | 
 | 		if (gsindex) | 
 | 			prev->gs = 0; | 
 | 	} | 
 | 	if (next->gs) | 
 | 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs); | 
 | 	prev->gsindex = gsindex; | 
 |  | 
 | 	/* | 
 | 	 * Switch the PDA and FPU contexts. | 
 | 	 */ | 
 | 	prev->usersp = percpu_read(old_rsp); | 
 | 	percpu_write(old_rsp, next->usersp); | 
 | 	percpu_write(current_task, next_p); | 
 |  | 
 | 	percpu_write(kernel_stack, | 
 | 		  (unsigned long)task_stack_page(next_p) + | 
 | 		  THREAD_SIZE - KERNEL_STACK_OFFSET); | 
 |  | 
 | 	/* | 
 | 	 * Now maybe reload the debug registers and handle I/O bitmaps | 
 | 	 */ | 
 | 	if (unlikely(task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT || | 
 | 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV)) | 
 | 		__switch_to_xtra(prev_p, next_p, tss); | 
 |  | 
 | 	/* | 
 | 	 * Preload the FPU context, now that we've determined that the | 
 | 	 * task is likely to be using it.  | 
 | 	 */ | 
 | 	if (preload_fpu) | 
 | 		__math_state_restore(); | 
 |  | 
 | 	return prev_p; | 
 | } | 
 |  | 
 | void set_personality_64bit(void) | 
 | { | 
 | 	/* inherit personality from parent */ | 
 |  | 
 | 	/* Make sure to be in 64bit mode */ | 
 | 	clear_thread_flag(TIF_IA32); | 
 |  | 
 | 	/* Ensure the corresponding mm is not marked. */ | 
 | 	if (current->mm) | 
 | 		current->mm->context.ia32_compat = 0; | 
 |  | 
 | 	/* TBD: overwrites user setup. Should have two bits. | 
 | 	   But 64bit processes have always behaved this way, | 
 | 	   so it's not too bad. The main problem is just that | 
 | 	   32bit childs are affected again. */ | 
 | 	current->personality &= ~READ_IMPLIES_EXEC; | 
 | } | 
 |  | 
 | void set_personality_ia32(void) | 
 | { | 
 | 	/* inherit personality from parent */ | 
 |  | 
 | 	/* Make sure to be in 32bit mode */ | 
 | 	set_thread_flag(TIF_IA32); | 
 | 	current->personality |= force_personality32; | 
 |  | 
 | 	/* Mark the associated mm as containing 32-bit tasks. */ | 
 | 	if (current->mm) | 
 | 		current->mm->context.ia32_compat = 1; | 
 |  | 
 | 	/* Prepare the first "return" to user space */ | 
 | 	current_thread_info()->status |= TS_COMPAT; | 
 | } | 
 |  | 
 | unsigned long get_wchan(struct task_struct *p) | 
 | { | 
 | 	unsigned long stack; | 
 | 	u64 fp, ip; | 
 | 	int count = 0; | 
 |  | 
 | 	if (!p || p == current || p->state == TASK_RUNNING) | 
 | 		return 0; | 
 | 	stack = (unsigned long)task_stack_page(p); | 
 | 	if (p->thread.sp < stack || p->thread.sp >= stack+THREAD_SIZE) | 
 | 		return 0; | 
 | 	fp = *(u64 *)(p->thread.sp); | 
 | 	do { | 
 | 		if (fp < (unsigned long)stack || | 
 | 		    fp >= (unsigned long)stack+THREAD_SIZE) | 
 | 			return 0; | 
 | 		ip = *(u64 *)(fp+8); | 
 | 		if (!in_sched_functions(ip)) | 
 | 			return ip; | 
 | 		fp = *(u64 *)fp; | 
 | 	} while (count++ < 16); | 
 | 	return 0; | 
 | } | 
 |  | 
 | long do_arch_prctl(struct task_struct *task, int code, unsigned long addr) | 
 | { | 
 | 	int ret = 0; | 
 | 	int doit = task == current; | 
 | 	int cpu; | 
 |  | 
 | 	switch (code) { | 
 | 	case ARCH_SET_GS: | 
 | 		if (addr >= TASK_SIZE_OF(task)) | 
 | 			return -EPERM; | 
 | 		cpu = get_cpu(); | 
 | 		/* handle small bases via the GDT because that's faster to | 
 | 		   switch. */ | 
 | 		if (addr <= 0xffffffff) { | 
 | 			set_32bit_tls(task, GS_TLS, addr); | 
 | 			if (doit) { | 
 | 				load_TLS(&task->thread, cpu); | 
 | 				load_gs_index(GS_TLS_SEL); | 
 | 			} | 
 | 			task->thread.gsindex = GS_TLS_SEL; | 
 | 			task->thread.gs = 0; | 
 | 		} else { | 
 | 			task->thread.gsindex = 0; | 
 | 			task->thread.gs = addr; | 
 | 			if (doit) { | 
 | 				load_gs_index(0); | 
 | 				ret = checking_wrmsrl(MSR_KERNEL_GS_BASE, addr); | 
 | 			} | 
 | 		} | 
 | 		put_cpu(); | 
 | 		break; | 
 | 	case ARCH_SET_FS: | 
 | 		/* Not strictly needed for fs, but do it for symmetry | 
 | 		   with gs */ | 
 | 		if (addr >= TASK_SIZE_OF(task)) | 
 | 			return -EPERM; | 
 | 		cpu = get_cpu(); | 
 | 		/* handle small bases via the GDT because that's faster to | 
 | 		   switch. */ | 
 | 		if (addr <= 0xffffffff) { | 
 | 			set_32bit_tls(task, FS_TLS, addr); | 
 | 			if (doit) { | 
 | 				load_TLS(&task->thread, cpu); | 
 | 				loadsegment(fs, FS_TLS_SEL); | 
 | 			} | 
 | 			task->thread.fsindex = FS_TLS_SEL; | 
 | 			task->thread.fs = 0; | 
 | 		} else { | 
 | 			task->thread.fsindex = 0; | 
 | 			task->thread.fs = addr; | 
 | 			if (doit) { | 
 | 				/* set the selector to 0 to not confuse | 
 | 				   __switch_to */ | 
 | 				loadsegment(fs, 0); | 
 | 				ret = checking_wrmsrl(MSR_FS_BASE, addr); | 
 | 			} | 
 | 		} | 
 | 		put_cpu(); | 
 | 		break; | 
 | 	case ARCH_GET_FS: { | 
 | 		unsigned long base; | 
 | 		if (task->thread.fsindex == FS_TLS_SEL) | 
 | 			base = read_32bit_tls(task, FS_TLS); | 
 | 		else if (doit) | 
 | 			rdmsrl(MSR_FS_BASE, base); | 
 | 		else | 
 | 			base = task->thread.fs; | 
 | 		ret = put_user(base, (unsigned long __user *)addr); | 
 | 		break; | 
 | 	} | 
 | 	case ARCH_GET_GS: { | 
 | 		unsigned long base; | 
 | 		unsigned gsindex; | 
 | 		if (task->thread.gsindex == GS_TLS_SEL) | 
 | 			base = read_32bit_tls(task, GS_TLS); | 
 | 		else if (doit) { | 
 | 			savesegment(gs, gsindex); | 
 | 			if (gsindex) | 
 | 				rdmsrl(MSR_KERNEL_GS_BASE, base); | 
 | 			else | 
 | 				base = task->thread.gs; | 
 | 		} else | 
 | 			base = task->thread.gs; | 
 | 		ret = put_user(base, (unsigned long __user *)addr); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | long sys_arch_prctl(int code, unsigned long addr) | 
 | { | 
 | 	return do_arch_prctl(current, code, addr); | 
 | } | 
 |  | 
 | unsigned long KSTK_ESP(struct task_struct *task) | 
 | { | 
 | 	return (test_tsk_thread_flag(task, TIF_IA32)) ? | 
 | 			(task_pt_regs(task)->sp) : ((task)->thread.usersp); | 
 | } |