Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/i386/mach-voyager/voyager_thread.c b/arch/i386/mach-voyager/voyager_thread.c
new file mode 100644
index 0000000..9980eef
--- /dev/null
+++ b/arch/i386/mach-voyager/voyager_thread.c
@@ -0,0 +1,167 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* Copyright (C) 2001
+ *
+ * Author: J.E.J.Bottomley@HansenPartnership.com
+ *
+ * linux/arch/i386/kernel/voyager_thread.c
+ *
+ * This module provides the machine status monitor thread for the
+ * voyager architecture. This allows us to monitor the machine
+ * environment (temp, voltage, fan function) and the front panel and
+ * internal UPS. If a fault is detected, this thread takes corrective
+ * action (usually just informing init)
+ * */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/mc146818rtc.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/kmod.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <asm/desc.h>
+#include <asm/voyager.h>
+#include <asm/vic.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
+#include <linux/irq.h>
+
+#define THREAD_NAME "kvoyagerd"
+
+/* external variables */
+int kvoyagerd_running = 0;
+DECLARE_MUTEX_LOCKED(kvoyagerd_sem);
+
+static int thread(void *);
+
+static __u8 set_timeout = 0;
+
+/* Start the machine monitor thread. Return 1 if OK, 0 if fail */
+static int __init
+voyager_thread_start(void)
+{
+ if(kernel_thread(thread, NULL, CLONE_KERNEL) < 0) {
+ /* This is serious, but not fatal */
+ printk(KERN_ERR "Voyager: Failed to create system monitor thread!!!\n");
+ return 1;
+ }
+ return 0;
+}
+
+static int
+execute(const char *string)
+{
+ int ret;
+
+ char *envp[] = {
+ "HOME=/",
+ "TERM=linux",
+ "PATH=/sbin:/usr/sbin:/bin:/usr/bin",
+ NULL,
+ };
+ char *argv[] = {
+ "/bin/bash",
+ "-c",
+ (char *)string,
+ NULL,
+ };
+
+ if ((ret = call_usermodehelper(argv[0], argv, envp, 1)) != 0) {
+ printk(KERN_ERR "Voyager failed to run \"%s\": %i\n",
+ string, ret);
+ }
+ return ret;
+}
+
+static void
+check_from_kernel(void)
+{
+ if(voyager_status.switch_off) {
+
+ /* FIXME: This should be configureable via proc */
+ execute("umask 600; echo 0 > /etc/initrunlvl; kill -HUP 1");
+ } else if(voyager_status.power_fail) {
+ VDEBUG(("Voyager daemon detected AC power failure\n"));
+
+ /* FIXME: This should be configureable via proc */
+ execute("umask 600; echo F > /etc/powerstatus; kill -PWR 1");
+ set_timeout = 1;
+ }
+}
+
+static void
+check_continuing_condition(void)
+{
+ if(voyager_status.power_fail) {
+ __u8 data;
+ voyager_cat_psi(VOYAGER_PSI_SUBREAD,
+ VOYAGER_PSI_AC_FAIL_REG, &data);
+ if((data & 0x1f) == 0) {
+ /* all power restored */
+ printk(KERN_NOTICE "VOYAGER AC power restored, cancelling shutdown\n");
+ /* FIXME: should be user configureable */
+ execute("umask 600; echo O > /etc/powerstatus; kill -PWR 1");
+ set_timeout = 0;
+ }
+ }
+}
+
+static void
+wakeup(unsigned long unused)
+{
+ up(&kvoyagerd_sem);
+}
+
+static int
+thread(void *unused)
+{
+ struct timer_list wakeup_timer;
+
+ kvoyagerd_running = 1;
+
+ reparent_to_init();
+ daemonize(THREAD_NAME);
+
+ set_timeout = 0;
+
+ init_timer(&wakeup_timer);
+
+ sigfillset(¤t->blocked);
+ current->signal->tty = NULL;
+
+ printk(KERN_NOTICE "Voyager starting monitor thread\n");
+
+ for(;;) {
+ down_interruptible(&kvoyagerd_sem);
+ VDEBUG(("Voyager Daemon awoken\n"));
+ if(voyager_status.request_from_kernel == 0) {
+ /* probably awoken from timeout */
+ check_continuing_condition();
+ } else {
+ check_from_kernel();
+ voyager_status.request_from_kernel = 0;
+ }
+ if(set_timeout) {
+ del_timer(&wakeup_timer);
+ wakeup_timer.expires = HZ + jiffies;
+ wakeup_timer.function = wakeup;
+ add_timer(&wakeup_timer);
+ }
+ }
+}
+
+static void __exit
+voyager_thread_stop(void)
+{
+ /* FIXME: do nothing at the moment */
+}
+
+module_init(voyager_thread_start);
+//module_exit(voyager_thread_stop);