|  | /* | 
|  | * Freescale QUICC Engine USB Host Controller Driver | 
|  | * | 
|  | * Copyright (c) Freescale Semicondutor, Inc. 2006. | 
|  | *               Shlomi Gridish <gridish@freescale.com> | 
|  | *               Jerry Huang <Chang-Ming.Huang@freescale.com> | 
|  | * Copyright (c) Logic Product Development, Inc. 2007 | 
|  | *               Peter Barada <peterb@logicpd.com> | 
|  | * Copyright (c) MontaVista Software, Inc. 2008. | 
|  | *               Anton Vorontsov <avorontsov@ru.mvista.com> | 
|  | * | 
|  | * This program is free software; you can redistribute  it and/or modify it | 
|  | * under  the terms of  the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/hcd.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <asm/qe.h> | 
|  | #include "fhci.h" | 
|  |  | 
|  | /* virtual root hub specific descriptor */ | 
|  | static u8 root_hub_des[] = { | 
|  | 0x09, /* blength */ | 
|  | 0x29, /* bDescriptorType;hub-descriptor */ | 
|  | 0x01, /* bNbrPorts */ | 
|  | 0x00, /* wHubCharacteristics */ | 
|  | 0x00, | 
|  | 0x01, /* bPwrOn2pwrGood;2ms */ | 
|  | 0x00, /* bHubContrCurrent;0mA */ | 
|  | 0x00, /* DeviceRemoveable */ | 
|  | 0xff, /* PortPwrCtrlMask */ | 
|  | }; | 
|  |  | 
|  | static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) | 
|  | { | 
|  | int gpio = fhci->gpios[gpio_nr]; | 
|  | bool alow = fhci->alow_gpios[gpio_nr]; | 
|  |  | 
|  | if (!gpio_is_valid(gpio)) | 
|  | return; | 
|  |  | 
|  | gpio_set_value(gpio, on ^ alow); | 
|  | mdelay(5); | 
|  | } | 
|  |  | 
|  | void fhci_config_transceiver(struct fhci_hcd *fhci, | 
|  | enum fhci_port_status status) | 
|  | { | 
|  | fhci_dbg(fhci, "-> %s: %d\n", __func__, status); | 
|  |  | 
|  | switch (status) { | 
|  | case FHCI_PORT_POWER_OFF: | 
|  | fhci_gpio_set_value(fhci, GPIO_POWER, false); | 
|  | break; | 
|  | case FHCI_PORT_DISABLED: | 
|  | case FHCI_PORT_WAITING: | 
|  | fhci_gpio_set_value(fhci, GPIO_POWER, true); | 
|  | break; | 
|  | case FHCI_PORT_LOW: | 
|  | fhci_gpio_set_value(fhci, GPIO_SPEED, false); | 
|  | break; | 
|  | case FHCI_PORT_FULL: | 
|  | fhci_gpio_set_value(fhci, GPIO_SPEED, true); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s: %d\n", __func__, status); | 
|  | } | 
|  |  | 
|  | /* disable the USB port by clearing the EN bit in the USBMOD register */ | 
|  | void fhci_port_disable(struct fhci_hcd *fhci) | 
|  | { | 
|  | struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; | 
|  | enum fhci_port_status port_status; | 
|  |  | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | fhci_stop_sof_timer(fhci); | 
|  |  | 
|  | fhci_flush_all_transmissions(usb); | 
|  |  | 
|  | fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
|  | port_status = usb->port_status; | 
|  | usb->port_status = FHCI_PORT_DISABLED; | 
|  |  | 
|  | /* Enable IDLE since we want to know if something comes along */ | 
|  | usb->saved_msk |= USB_E_IDLE_MASK; | 
|  | out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); | 
|  |  | 
|  | /* check if during the disconnection process attached new device */ | 
|  | if (port_status == FHCI_PORT_WAITING) | 
|  | fhci_device_connected_interrupt(fhci); | 
|  | usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; | 
|  | usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
|  | fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | /* enable the USB port by setting the EN bit in the USBMOD register */ | 
|  | void fhci_port_enable(void *lld) | 
|  | { | 
|  | struct fhci_usb *usb = (struct fhci_usb *)lld; | 
|  | struct fhci_hcd *fhci = usb->fhci; | 
|  |  | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | fhci_config_transceiver(fhci, usb->port_status); | 
|  |  | 
|  | if ((usb->port_status != FHCI_PORT_FULL) && | 
|  | (usb->port_status != FHCI_PORT_LOW)) | 
|  | fhci_start_sof_timer(fhci); | 
|  |  | 
|  | usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; | 
|  | usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | void fhci_io_port_generate_reset(struct fhci_hcd *fhci) | 
|  | { | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); | 
|  | gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); | 
|  | gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); | 
|  |  | 
|  | mdelay(5); | 
|  |  | 
|  | qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); | 
|  | qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); | 
|  | qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | /* generate the RESET condition on the bus */ | 
|  | void fhci_port_reset(void *lld) | 
|  | { | 
|  | struct fhci_usb *usb = (struct fhci_usb *)lld; | 
|  | struct fhci_hcd *fhci = usb->fhci; | 
|  | u8 mode; | 
|  | u16 mask; | 
|  |  | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | fhci_stop_sof_timer(fhci); | 
|  | /* disable the USB controller */ | 
|  | mode = in_8(&fhci->regs->usb_mod); | 
|  | out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); | 
|  |  | 
|  | /* disable idle interrupts */ | 
|  | mask = in_be16(&fhci->regs->usb_mask); | 
|  | out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); | 
|  |  | 
|  | fhci_io_port_generate_reset(fhci); | 
|  |  | 
|  | /* enable interrupt on this endpoint */ | 
|  | out_be16(&fhci->regs->usb_mask, mask); | 
|  |  | 
|  | /* enable the USB controller */ | 
|  | mode = in_8(&fhci->regs->usb_mod); | 
|  | out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); | 
|  | fhci_start_sof_timer(fhci); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | int ret = 0; | 
|  | unsigned long flags; | 
|  |  | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | spin_lock_irqsave(&fhci->lock, flags); | 
|  |  | 
|  | if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | | 
|  | USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | | 
|  | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { | 
|  | *buf = 1 << 1; | 
|  | ret = 1; | 
|  | fhci_dbg(fhci, "-- %s\n", __func__); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | 
|  | u16 wIndex, char *buf, u16 wLength) | 
|  | { | 
|  | struct fhci_hcd *fhci = hcd_to_fhci(hcd); | 
|  | int retval = 0; | 
|  | int len = 0; | 
|  | struct usb_hub_status *hub_status; | 
|  | struct usb_port_status *port_status; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&fhci->lock, flags); | 
|  |  | 
|  | fhci_dbg(fhci, "-> %s\n", __func__); | 
|  |  | 
|  | switch (typeReq) { | 
|  | case ClearHubFeature: | 
|  | switch (wValue) { | 
|  | case C_HUB_LOCAL_POWER: | 
|  | case C_HUB_OVER_CURRENT: | 
|  | break; | 
|  | default: | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | case ClearPortFeature: | 
|  | fhci->vroot_hub->feature &= (1 << wValue); | 
|  |  | 
|  | switch (wValue) { | 
|  | case USB_PORT_FEAT_ENABLE: | 
|  | fhci->vroot_hub->port.wPortStatus &= | 
|  | ~USB_PORT_STAT_ENABLE; | 
|  | fhci_port_disable(fhci); | 
|  | break; | 
|  | case USB_PORT_FEAT_C_ENABLE: | 
|  | fhci->vroot_hub->port.wPortChange &= | 
|  | ~USB_PORT_STAT_C_ENABLE; | 
|  | break; | 
|  | case USB_PORT_FEAT_SUSPEND: | 
|  | fhci->vroot_hub->port.wPortStatus &= | 
|  | ~USB_PORT_STAT_SUSPEND; | 
|  | fhci_stop_sof_timer(fhci); | 
|  | break; | 
|  | case USB_PORT_FEAT_C_SUSPEND: | 
|  | fhci->vroot_hub->port.wPortChange &= | 
|  | ~USB_PORT_STAT_C_SUSPEND; | 
|  | break; | 
|  | case USB_PORT_FEAT_POWER: | 
|  | fhci->vroot_hub->port.wPortStatus &= | 
|  | ~USB_PORT_STAT_POWER; | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); | 
|  | break; | 
|  | case USB_PORT_FEAT_C_CONNECTION: | 
|  | fhci->vroot_hub->port.wPortChange &= | 
|  | ~USB_PORT_STAT_C_CONNECTION; | 
|  | break; | 
|  | case USB_PORT_FEAT_C_OVER_CURRENT: | 
|  | fhci->vroot_hub->port.wPortChange &= | 
|  | ~USB_PORT_STAT_C_OVERCURRENT; | 
|  | break; | 
|  | case USB_PORT_FEAT_C_RESET: | 
|  | fhci->vroot_hub->port.wPortChange &= | 
|  | ~USB_PORT_STAT_C_RESET; | 
|  | break; | 
|  | default: | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | case GetHubDescriptor: | 
|  | memcpy(buf, root_hub_des, sizeof(root_hub_des)); | 
|  | buf[3] = 0x11; /* per-port power, no ovrcrnt */ | 
|  | len = (buf[0] < wLength) ? buf[0] : wLength; | 
|  | break; | 
|  | case GetHubStatus: | 
|  | hub_status = (struct usb_hub_status *)buf; | 
|  | hub_status->wHubStatus = | 
|  | cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); | 
|  | hub_status->wHubChange = | 
|  | cpu_to_le16(fhci->vroot_hub->hub.wHubChange); | 
|  | len = 4; | 
|  | break; | 
|  | case GetPortStatus: | 
|  | port_status = (struct usb_port_status *)buf; | 
|  | port_status->wPortStatus = | 
|  | cpu_to_le16(fhci->vroot_hub->port.wPortStatus); | 
|  | port_status->wPortChange = | 
|  | cpu_to_le16(fhci->vroot_hub->port.wPortChange); | 
|  | len = 4; | 
|  | break; | 
|  | case SetHubFeature: | 
|  | switch (wValue) { | 
|  | case C_HUB_OVER_CURRENT: | 
|  | case C_HUB_LOCAL_POWER: | 
|  | break; | 
|  | default: | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | case SetPortFeature: | 
|  | fhci->vroot_hub->feature |= (1 << wValue); | 
|  |  | 
|  | switch (wValue) { | 
|  | case USB_PORT_FEAT_ENABLE: | 
|  | fhci->vroot_hub->port.wPortStatus |= | 
|  | USB_PORT_STAT_ENABLE; | 
|  | fhci_port_enable(fhci->usb_lld); | 
|  | break; | 
|  | case USB_PORT_FEAT_SUSPEND: | 
|  | fhci->vroot_hub->port.wPortStatus |= | 
|  | USB_PORT_STAT_SUSPEND; | 
|  | fhci_stop_sof_timer(fhci); | 
|  | break; | 
|  | case USB_PORT_FEAT_RESET: | 
|  | fhci->vroot_hub->port.wPortStatus |= | 
|  | USB_PORT_STAT_RESET; | 
|  | fhci_port_reset(fhci->usb_lld); | 
|  | fhci->vroot_hub->port.wPortStatus |= | 
|  | USB_PORT_STAT_ENABLE; | 
|  | fhci->vroot_hub->port.wPortStatus &= | 
|  | ~USB_PORT_STAT_RESET; | 
|  | break; | 
|  | case USB_PORT_FEAT_POWER: | 
|  | fhci->vroot_hub->port.wPortStatus |= | 
|  | USB_PORT_STAT_POWER; | 
|  | fhci_config_transceiver(fhci, FHCI_PORT_WAITING); | 
|  | break; | 
|  | default: | 
|  | goto error; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | error: | 
|  | retval = -EPIPE; | 
|  | } | 
|  |  | 
|  | fhci_dbg(fhci, "<- %s\n", __func__); | 
|  |  | 
|  | spin_unlock_irqrestore(&fhci->lock, flags); | 
|  |  | 
|  | return retval; | 
|  | } |