|  | /* | 
|  | * USB PhidgetInterfaceKit driver 1.0 | 
|  | * | 
|  | * Copyright (C) 2004 Sean Young <sean@mess.org> | 
|  | * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This is a driver for the USB PhidgetInterfaceKit. | 
|  | */ | 
|  |  | 
|  | #include <linux/config.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/usb.h> | 
|  |  | 
|  | #define DRIVER_AUTHOR "Sean Young <sean@mess.org>" | 
|  | #define DRIVER_DESC "USB PhidgetInterfaceKit Driver" | 
|  |  | 
|  | #define USB_VENDOR_ID_GLAB		0x06c2 | 
|  | #define USB_DEVICE_ID_INTERFACEKIT004	0x0040 | 
|  | #define USB_DEVICE_ID_INTERFACEKIT888	0x0045 | 
|  | #define USB_DEVICE_ID_INTERFACEKIT047	0x0051 | 
|  | #define USB_DEVICE_ID_INTERFACEKIT088	0x0053 | 
|  |  | 
|  | #define USB_VENDOR_ID_WISEGROUP		0x0925 | 
|  | #define USB_DEVICE_ID_INTERFACEKIT884	0x8201 | 
|  |  | 
|  | #define MAX_INTERFACES			8 | 
|  |  | 
|  | struct driver_interfacekit { | 
|  | int sensors; | 
|  | int inputs; | 
|  | int outputs; | 
|  | int has_lcd; | 
|  | }; | 
|  | #define ifkit(_sensors, _inputs, _outputs, _lcd)			\ | 
|  | static struct driver_interfacekit ph_##_sensors##_inputs##_outputs = {	\ | 
|  | .sensors	= _sensors,					\ | 
|  | .inputs		= _inputs,					\ | 
|  | .outputs	= _outputs,					\ | 
|  | .has_lcd	= _lcd,						\ | 
|  | }; | 
|  | ifkit(0, 0, 4, 0); | 
|  | ifkit(8, 8, 8, 0); | 
|  | ifkit(0, 4, 7, 1); | 
|  | ifkit(8, 8, 4, 0); | 
|  | ifkit(0, 8, 8, 1); | 
|  |  | 
|  | struct phidget_interfacekit { | 
|  | struct usb_device *udev; | 
|  | struct usb_interface *intf; | 
|  | struct driver_interfacekit *ifkit; | 
|  | int outputs[MAX_INTERFACES]; | 
|  | int inputs[MAX_INTERFACES]; | 
|  | int sensors[MAX_INTERFACES]; | 
|  | u8 lcd_files_on; | 
|  |  | 
|  | struct urb *irq; | 
|  | unsigned char *data; | 
|  | dma_addr_t data_dma; | 
|  | }; | 
|  |  | 
|  | static struct usb_device_id id_table[] = { | 
|  | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004), | 
|  | .driver_info = (kernel_ulong_t)&ph_004}, | 
|  | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888), | 
|  | .driver_info = (kernel_ulong_t)&ph_888}, | 
|  | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047), | 
|  | .driver_info = (kernel_ulong_t)&ph_047}, | 
|  | {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088), | 
|  | .driver_info = (kernel_ulong_t)&ph_088}, | 
|  | {USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884), | 
|  | .driver_info = (kernel_ulong_t)&ph_884}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, id_table); | 
|  |  | 
|  | static int change_outputs(struct phidget_interfacekit *kit, int output_num, int enable) | 
|  | { | 
|  | unsigned char *buffer; | 
|  | int retval; | 
|  | int n; | 
|  |  | 
|  | buffer = kmalloc(4, GFP_KERNEL); | 
|  | if (!buffer) { | 
|  | dev_err(&kit->udev->dev, "%s - out of memory\n", | 
|  | __FUNCTION__); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | kit->outputs[output_num] = enable; | 
|  | memset(buffer, 0, 4); | 
|  | for (n=0; n<8; n++) { | 
|  | if (kit->outputs[n]) { | 
|  | buffer[0] |= 1 << n; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_dbg(&kit->udev->dev, "sending data: %02x\n", buffer[0]); | 
|  |  | 
|  | retval = usb_control_msg(kit->udev, | 
|  | usb_sndctrlpipe(kit->udev, 0), | 
|  | 0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000); | 
|  |  | 
|  | if (retval != 4) | 
|  | dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", | 
|  | retval); | 
|  | kfree(buffer); | 
|  |  | 
|  | return retval < 0 ? retval : 0; | 
|  | } | 
|  |  | 
|  | static int change_string(struct phidget_interfacekit *kit, const char *display, unsigned char row) | 
|  | { | 
|  | unsigned char *buffer; | 
|  | unsigned char *form_buffer; | 
|  | int retval = -ENOMEM; | 
|  | int i,j, len, buf_ptr; | 
|  |  | 
|  | buffer = kmalloc(8, GFP_KERNEL); | 
|  | form_buffer = kmalloc(30, GFP_KERNEL); | 
|  | if ((!buffer) || (!form_buffer)) { | 
|  | dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | len = strlen(display); | 
|  | if (len > 20) | 
|  | len = 20; | 
|  |  | 
|  | dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display); | 
|  |  | 
|  | form_buffer[0] = row * 0x40 + 0x80; | 
|  | form_buffer[1] = 0x02; | 
|  | buf_ptr = 2; | 
|  | for (i = 0; i<len; i++) | 
|  | form_buffer[buf_ptr++] = display[i]; | 
|  |  | 
|  | for (i = 0; i < (20 - len); i++) | 
|  | form_buffer[buf_ptr++] = 0x20; | 
|  | form_buffer[buf_ptr++] = 0x01; | 
|  | form_buffer[buf_ptr++] = row * 0x40 + 0x80 + strlen(display); | 
|  |  | 
|  | for (i = 0; i < buf_ptr; i += 7) { | 
|  | if ((buf_ptr - i) > 7) | 
|  | len = 7; | 
|  | else | 
|  | len = (buf_ptr - i); | 
|  | for (j = 0; j < len; j++) | 
|  | buffer[j] = form_buffer[i + j]; | 
|  | buffer[7] = len; | 
|  |  | 
|  | retval = usb_control_msg(kit->udev, | 
|  | usb_sndctrlpipe(kit->udev, 0), | 
|  | 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); | 
|  | if (retval < 0) | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | retval = 0; | 
|  | exit: | 
|  | kfree(buffer); | 
|  | kfree(form_buffer); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | #define set_lcd_line(number)	\ | 
|  | static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)	\ | 
|  | {											\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);				\ | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf);			\ | 
|  | change_string(kit, buf, number - 1);						\ | 
|  | return count;									\ | 
|  | }											\ | 
|  | static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number); | 
|  | set_lcd_line(1); | 
|  | set_lcd_line(2); | 
|  |  | 
|  | static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(dev); | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf); | 
|  | int enabled; | 
|  | unsigned char *buffer; | 
|  | int retval = -ENOMEM; | 
|  |  | 
|  | buffer = kmalloc(8, GFP_KERNEL); | 
|  | if (!buffer) { | 
|  | dev_err(&kit->udev->dev, "%s - out of memory\n", __FUNCTION__); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (sscanf(buf, "%d", &enabled) < 1) { | 
|  | retval = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  | memset(buffer, 0x00, 8); | 
|  | if (enabled) | 
|  | buffer[0] = 0x01; | 
|  | buffer[7] = 0x11; | 
|  |  | 
|  | dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off"); | 
|  |  | 
|  | retval = usb_control_msg(kit->udev, | 
|  | usb_sndctrlpipe(kit->udev, 0), | 
|  | 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); | 
|  | if (retval < 0) | 
|  | goto exit; | 
|  |  | 
|  | retval = count; | 
|  | exit: | 
|  | kfree(buffer); | 
|  | return retval; | 
|  | } | 
|  | static DEVICE_ATTR(backlight, S_IWUGO, NULL, set_backlight); | 
|  |  | 
|  | static void remove_lcd_files(struct phidget_interfacekit *kit) | 
|  | { | 
|  | if (kit->lcd_files_on) { | 
|  | dev_dbg(&kit->udev->dev, "Removing lcd files\n"); | 
|  | device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1); | 
|  | device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2); | 
|  | device_remove_file(&kit->intf->dev, &dev_attr_backlight); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(dev); | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf); | 
|  | int enable; | 
|  |  | 
|  | if (kit->ifkit->has_lcd == 0) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (sscanf(buf, "%d", &enable) < 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (enable) { | 
|  | if (!kit->lcd_files_on) { | 
|  | dev_dbg(&kit->udev->dev, "Adding lcd files\n"); | 
|  | device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1); | 
|  | device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2); | 
|  | device_create_file(&kit->intf->dev, &dev_attr_backlight); | 
|  | kit->lcd_files_on = 1; | 
|  | } | 
|  | } else { | 
|  | if (kit->lcd_files_on) { | 
|  | remove_lcd_files(kit); | 
|  | kit->lcd_files_on = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  | static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files); | 
|  |  | 
|  | static void interfacekit_irq(struct urb *urb, struct pt_regs *regs) | 
|  | { | 
|  | struct phidget_interfacekit *kit = urb->context; | 
|  | unsigned char *buffer = kit->data; | 
|  | int status; | 
|  | int n; | 
|  |  | 
|  | switch (urb->status) { | 
|  | case 0:			/* success */ | 
|  | break; | 
|  | case -ECONNRESET:	/* unlink */ | 
|  | case -ENOENT: | 
|  | case -ESHUTDOWN: | 
|  | return; | 
|  | /* -EPIPE:  should clear the halt */ | 
|  | default:		/* error */ | 
|  | goto resubmit; | 
|  | } | 
|  |  | 
|  | for (n=0; n<8; n++) { | 
|  | kit->inputs[n] = buffer[1] & (1 << n) ? 1 : 0; | 
|  | } | 
|  |  | 
|  | if (buffer[0] & 1) { | 
|  | kit->sensors[4] = buffer[2] + (buffer[3] & 0x0f) * 256; | 
|  | kit->sensors[5] = buffer[4] + (buffer[3] & 0xf0) * 16; | 
|  | kit->sensors[6] = buffer[5] + (buffer[6] & 0x0f) * 256; | 
|  | kit->sensors[7] = buffer[7] + (buffer[6] & 0xf0) * 16; | 
|  | } else { | 
|  | kit->sensors[0] = buffer[2] + (buffer[3] & 0x0f) * 256; | 
|  | kit->sensors[1] = buffer[4] + (buffer[3] & 0xf0) * 16; | 
|  | kit->sensors[2] = buffer[5] + (buffer[6] & 0x0f) * 256; | 
|  | kit->sensors[3] = buffer[7] + (buffer[6] & 0xf0) * 16; | 
|  | } | 
|  |  | 
|  | resubmit: | 
|  | status = usb_submit_urb(urb, SLAB_ATOMIC); | 
|  | if (status) | 
|  | err("can't resubmit intr, %s-%s/interfacekit0, status %d", | 
|  | kit->udev->bus->bus_name, | 
|  | kit->udev->devpath, status); | 
|  | } | 
|  |  | 
|  | #define show_set_output(value)		\ | 
|  | static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf, 	\ | 
|  | size_t count)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf);	\ | 
|  | int enabled;							\ | 
|  | int retval;							\ | 
|  | \ | 
|  | if (sscanf(buf, "%d", &enabled) < 1) {				\ | 
|  | return -EINVAL;						\ | 
|  | }								\ | 
|  | \ | 
|  | retval = change_outputs(kit, value - 1, enabled ? 1 : 0);	\ | 
|  | \ | 
|  | return retval ? retval : count;					\ | 
|  | }									\ | 
|  | \ | 
|  | static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf);	\ | 
|  | \ | 
|  | return sprintf(buf, "%d\n", kit->outputs[value - 1]);		\ | 
|  | }									\ | 
|  | static DEVICE_ATTR(output##value, S_IWUGO | S_IRUGO,			\ | 
|  | show_output##value, set_output##value); | 
|  | show_set_output(1); | 
|  | show_set_output(2); | 
|  | show_set_output(3); | 
|  | show_set_output(4); | 
|  | show_set_output(5); | 
|  | show_set_output(6); | 
|  | show_set_output(7); | 
|  | show_set_output(8);	/* should be MAX_INTERFACES - 1 */ | 
|  |  | 
|  | #define show_input(value)	\ | 
|  | static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf);	\ | 
|  | \ | 
|  | return sprintf(buf, "%d\n", kit->inputs[value - 1]);		\ | 
|  | }									\ | 
|  | static DEVICE_ATTR(input##value, S_IRUGO, show_input##value, NULL); | 
|  |  | 
|  | show_input(1); | 
|  | show_input(2); | 
|  | show_input(3); | 
|  | show_input(4); | 
|  | show_input(5); | 
|  | show_input(6); | 
|  | show_input(7); | 
|  | show_input(8);		/* should be MAX_INTERFACES - 1 */ | 
|  |  | 
|  | #define show_sensor(value)	\ | 
|  | static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct phidget_interfacekit *kit = usb_get_intfdata(intf);	\ | 
|  | \ | 
|  | return sprintf(buf, "%d\n", kit->sensors[value - 1]);		\ | 
|  | }									\ | 
|  | static DEVICE_ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL); | 
|  |  | 
|  | show_sensor(1); | 
|  | show_sensor(2); | 
|  | show_sensor(3); | 
|  | show_sensor(4); | 
|  | show_sensor(5); | 
|  | show_sensor(6); | 
|  | show_sensor(7); | 
|  | show_sensor(8);		/* should be MAX_INTERFACES - 1 */ | 
|  |  | 
|  | static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_device *dev = interface_to_usbdev(intf); | 
|  | struct usb_host_interface *interface; | 
|  | struct usb_endpoint_descriptor *endpoint; | 
|  | struct phidget_interfacekit *kit; | 
|  | struct driver_interfacekit *ifkit; | 
|  | int pipe, maxp; | 
|  |  | 
|  | ifkit = (struct driver_interfacekit *)id->driver_info; | 
|  | if (!ifkit) | 
|  | return -ENODEV; | 
|  |  | 
|  | interface = intf->cur_altsetting; | 
|  | if (interface->desc.bNumEndpoints != 1) | 
|  | return -ENODEV; | 
|  |  | 
|  | endpoint = &interface->endpoint[0].desc; | 
|  | if (!(endpoint->bEndpointAddress & 0x80)) | 
|  | return -ENODEV; | 
|  | /* | 
|  | * bmAttributes | 
|  | */ | 
|  | pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); | 
|  | maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); | 
|  |  | 
|  | kit = kmalloc(sizeof(*kit), GFP_KERNEL); | 
|  | if (kit  == NULL) { | 
|  | dev_err(&intf->dev, "%s - out of memory\n", __FUNCTION__); | 
|  | return -ENOMEM; | 
|  | } | 
|  | memset(kit, 0, sizeof(*kit)); | 
|  | kit->ifkit = ifkit; | 
|  |  | 
|  | kit->data = usb_buffer_alloc(dev, 8, SLAB_ATOMIC, &kit->data_dma); | 
|  | if (!kit->data) { | 
|  | kfree(kit); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | kit->irq = usb_alloc_urb(0, GFP_KERNEL); | 
|  | if (!kit->irq) { | 
|  | usb_buffer_free(dev, 8, kit->data, kit->data_dma); | 
|  | kfree(kit); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | kit->udev = usb_get_dev(dev); | 
|  | kit->intf = intf; | 
|  | usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data, | 
|  | (maxp > 8 ? 8 : maxp), | 
|  | interfacekit_irq, kit, endpoint->bInterval); | 
|  | kit->irq->transfer_dma = kit->data_dma; | 
|  | kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | 
|  |  | 
|  | usb_set_intfdata(intf, kit); | 
|  |  | 
|  | if (usb_submit_urb(kit->irq, GFP_KERNEL)) { | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (ifkit->outputs >= 4) { | 
|  | device_create_file(&intf->dev, &dev_attr_output1); | 
|  | device_create_file(&intf->dev, &dev_attr_output2); | 
|  | device_create_file(&intf->dev, &dev_attr_output3); | 
|  | device_create_file(&intf->dev, &dev_attr_output4); | 
|  | } | 
|  | if (ifkit->outputs == 8) { | 
|  | device_create_file(&intf->dev, &dev_attr_output5); | 
|  | device_create_file(&intf->dev, &dev_attr_output6); | 
|  | device_create_file(&intf->dev, &dev_attr_output7); | 
|  | device_create_file(&intf->dev, &dev_attr_output8); | 
|  | } | 
|  |  | 
|  | if (ifkit->inputs >= 4) { | 
|  | device_create_file(&intf->dev, &dev_attr_input1); | 
|  | device_create_file(&intf->dev, &dev_attr_input2); | 
|  | device_create_file(&intf->dev, &dev_attr_input3); | 
|  | device_create_file(&intf->dev, &dev_attr_input4); | 
|  | } | 
|  | if (ifkit->inputs == 8) { | 
|  | device_create_file(&intf->dev, &dev_attr_input5); | 
|  | device_create_file(&intf->dev, &dev_attr_input6); | 
|  | device_create_file(&intf->dev, &dev_attr_input7); | 
|  | device_create_file(&intf->dev, &dev_attr_input8); | 
|  | } | 
|  |  | 
|  | if (ifkit->sensors >= 4) { | 
|  | device_create_file(&intf->dev, &dev_attr_sensor1); | 
|  | device_create_file(&intf->dev, &dev_attr_sensor2); | 
|  | device_create_file(&intf->dev, &dev_attr_sensor3); | 
|  | device_create_file(&intf->dev, &dev_attr_sensor4); | 
|  | } | 
|  | if (ifkit->sensors >= 7) { | 
|  | device_create_file(&intf->dev, &dev_attr_sensor5); | 
|  | device_create_file(&intf->dev, &dev_attr_sensor6); | 
|  | device_create_file(&intf->dev, &dev_attr_sensor7); | 
|  | } | 
|  | if (ifkit->sensors == 8) { | 
|  | device_create_file(&intf->dev, &dev_attr_sensor8); | 
|  | } | 
|  |  | 
|  | if (ifkit->has_lcd) | 
|  | device_create_file(&intf->dev, &dev_attr_lcd); | 
|  |  | 
|  | dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n", | 
|  | ifkit->sensors, ifkit->inputs, ifkit->outputs); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void interfacekit_disconnect(struct usb_interface *interface) | 
|  | { | 
|  | struct phidget_interfacekit *kit; | 
|  |  | 
|  | kit = usb_get_intfdata(interface); | 
|  | usb_set_intfdata(interface, NULL); | 
|  | if (!kit) | 
|  | return; | 
|  |  | 
|  | if (kit->ifkit->outputs >= 4) { | 
|  | device_remove_file(&interface->dev, &dev_attr_output1); | 
|  | device_remove_file(&interface->dev, &dev_attr_output2); | 
|  | device_remove_file(&interface->dev, &dev_attr_output3); | 
|  | device_remove_file(&interface->dev, &dev_attr_output4); | 
|  | } | 
|  | if (kit->ifkit->outputs == 8) { | 
|  | device_remove_file(&interface->dev, &dev_attr_output5); | 
|  | device_remove_file(&interface->dev, &dev_attr_output6); | 
|  | device_remove_file(&interface->dev, &dev_attr_output7); | 
|  | device_remove_file(&interface->dev, &dev_attr_output8); | 
|  | } | 
|  |  | 
|  | if (kit->ifkit->inputs >= 4) { | 
|  | device_remove_file(&interface->dev, &dev_attr_input1); | 
|  | device_remove_file(&interface->dev, &dev_attr_input2); | 
|  | device_remove_file(&interface->dev, &dev_attr_input3); | 
|  | device_remove_file(&interface->dev, &dev_attr_input4); | 
|  | } | 
|  | if (kit->ifkit->inputs == 8) { | 
|  | device_remove_file(&interface->dev, &dev_attr_input5); | 
|  | device_remove_file(&interface->dev, &dev_attr_input6); | 
|  | device_remove_file(&interface->dev, &dev_attr_input7); | 
|  | device_remove_file(&interface->dev, &dev_attr_input8); | 
|  | } | 
|  |  | 
|  | if (kit->ifkit->sensors >= 4) { | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor1); | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor2); | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor3); | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor4); | 
|  | } | 
|  | if (kit->ifkit->sensors >= 7) { | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor5); | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor6); | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor7); | 
|  | } | 
|  | if (kit->ifkit->sensors == 8) { | 
|  | device_remove_file(&interface->dev, &dev_attr_sensor8); | 
|  | } | 
|  | if (kit->ifkit->has_lcd) | 
|  | device_remove_file(&interface->dev, &dev_attr_lcd); | 
|  |  | 
|  | dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n", | 
|  | kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs); | 
|  |  | 
|  | usb_kill_urb(kit->irq); | 
|  | usb_free_urb(kit->irq); | 
|  | usb_buffer_free(kit->udev, 8, kit->data, kit->data_dma); | 
|  |  | 
|  | usb_put_dev(kit->udev); | 
|  | kfree(kit); | 
|  | } | 
|  |  | 
|  | static struct usb_driver interfacekit_driver = { | 
|  | .name = "phidgetkit", | 
|  | .probe = interfacekit_probe, | 
|  | .disconnect = interfacekit_disconnect, | 
|  | .id_table = id_table | 
|  | }; | 
|  |  | 
|  | static int __init interfacekit_init(void) | 
|  | { | 
|  | int retval = 0; | 
|  |  | 
|  | retval = usb_register(&interfacekit_driver); | 
|  | if (retval) | 
|  | err("usb_register failed. Error number %d", retval); | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void __exit interfacekit_exit(void) | 
|  | { | 
|  | usb_deregister(&interfacekit_driver); | 
|  | } | 
|  |  | 
|  | module_init(interfacekit_init); | 
|  | module_exit(interfacekit_exit); | 
|  |  | 
|  | MODULE_AUTHOR(DRIVER_AUTHOR); | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_LICENSE("GPL"); |