|  | #ifndef __ASM_POWERPC_PCI_H | 
|  | #define __ASM_POWERPC_PCI_H | 
|  | #ifdef __KERNEL__ | 
|  |  | 
|  | /* | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version | 
|  | * 2 of the License, or (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/dma-mapping.h> | 
|  |  | 
|  | #include <asm/machdep.h> | 
|  | #include <asm/scatterlist.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/prom.h> | 
|  | #include <asm/pci-bridge.h> | 
|  |  | 
|  | #include <asm-generic/pci-dma-compat.h> | 
|  |  | 
|  | #define PCIBIOS_MIN_IO		0x1000 | 
|  | #define PCIBIOS_MIN_MEM		0x10000000 | 
|  |  | 
|  | struct pci_dev; | 
|  |  | 
|  | /* Values for the `which' argument to sys_pciconfig_iobase syscall.  */ | 
|  | #define IOBASE_BRIDGE_NUMBER	0 | 
|  | #define IOBASE_MEMORY		1 | 
|  | #define IOBASE_IO		2 | 
|  | #define IOBASE_ISA_IO		3 | 
|  | #define IOBASE_ISA_MEM		4 | 
|  |  | 
|  | /* | 
|  | * Set this to 1 if you want the kernel to re-assign all PCI | 
|  | * bus numbers | 
|  | */ | 
|  | extern int pci_assign_all_buses; | 
|  | #define pcibios_assign_all_busses()	(pci_assign_all_buses) | 
|  |  | 
|  | #define pcibios_scan_all_fns(a, b)	0 | 
|  |  | 
|  | static inline void pcibios_set_master(struct pci_dev *dev) | 
|  | { | 
|  | /* No special bus mastering setup handling */ | 
|  | } | 
|  |  | 
|  | static inline void pcibios_penalize_isa_irq(int irq, int active) | 
|  | { | 
|  | /* We don't do dynamic PCI IRQ allocation */ | 
|  | } | 
|  |  | 
|  | #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ | 
|  | static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) | 
|  | { | 
|  | if (ppc_md.pci_get_legacy_ide_irq) | 
|  | return ppc_md.pci_get_legacy_ide_irq(dev, channel); | 
|  | return channel ? 15 : 14; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | #define HAVE_ARCH_PCI_MWI 1 | 
|  | static inline int pcibios_prep_mwi(struct pci_dev *dev) | 
|  | { | 
|  | /* | 
|  | * We would like to avoid touching the cacheline size or MWI bit | 
|  | * but we cant do that with the current pcibios_prep_mwi | 
|  | * interface. pSeries firmware sets the cacheline size (which is not | 
|  | * the cpu cacheline size in all cases) and hardware treats MWI | 
|  | * the same as memory write. So we dont touch the cacheline size | 
|  | * here and allow the generic code to set the MWI bit. | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | extern struct dma_mapping_ops pci_dma_ops; | 
|  |  | 
|  | /* For DAC DMA, we currently don't support it by default, but | 
|  | * we let 64-bit platforms override this. | 
|  | */ | 
|  | static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask) | 
|  | { | 
|  | if (pci_dma_ops.dac_dma_supported) | 
|  | return pci_dma_ops.dac_dma_supported(&hwdev->dev, mask); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | static inline void pci_dma_burst_advice(struct pci_dev *pdev, | 
|  | enum pci_dma_burst_strategy *strat, | 
|  | unsigned long *strategy_parameter) | 
|  | { | 
|  | unsigned long cacheline_size; | 
|  | u8 byte; | 
|  |  | 
|  | pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte); | 
|  | if (byte == 0) | 
|  | cacheline_size = 1024; | 
|  | else | 
|  | cacheline_size = (int) byte * 4; | 
|  |  | 
|  | *strat = PCI_DMA_BURST_MULTIPLE; | 
|  | *strategy_parameter = cacheline_size; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | extern int pci_domain_nr(struct pci_bus *bus); | 
|  |  | 
|  | /* Decide whether to display the domain number in /proc */ | 
|  | extern int pci_proc_domain(struct pci_bus *bus); | 
|  |  | 
|  | #else /* 32-bit */ | 
|  |  | 
|  | #ifdef CONFIG_PCI | 
|  | static inline void pci_dma_burst_advice(struct pci_dev *pdev, | 
|  | enum pci_dma_burst_strategy *strat, | 
|  | unsigned long *strategy_parameter) | 
|  | { | 
|  | *strat = PCI_DMA_BURST_INFINITY; | 
|  | *strategy_parameter = ~0UL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * At present there are very few 32-bit PPC machines that can have | 
|  | * memory above the 4GB point, and we don't support that. | 
|  | */ | 
|  | #define pci_dac_dma_supported(pci_dev, mask)	(0) | 
|  |  | 
|  | /* Return the index of the PCI controller for device PDEV. */ | 
|  | #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index | 
|  |  | 
|  | /* Set the name of the bus as it appears in /proc/bus/pci */ | 
|  | static inline int pci_proc_domain(struct pci_bus *bus) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | struct vm_area_struct; | 
|  | /* Map a range of PCI memory or I/O space for a device into user space */ | 
|  | int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, | 
|  | enum pci_mmap_state mmap_state, int write_combine); | 
|  |  | 
|  | /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ | 
|  | #define HAVE_PCI_MMAP	1 | 
|  |  | 
|  | #ifdef CONFIG_PPC64 | 
|  | /* pci_unmap_{single,page} is not a nop, thus... */ | 
|  | #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\ | 
|  | dma_addr_t ADDR_NAME; | 
|  | #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\ | 
|  | __u32 LEN_NAME; | 
|  | #define pci_unmap_addr(PTR, ADDR_NAME)			\ | 
|  | ((PTR)->ADDR_NAME) | 
|  | #define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\ | 
|  | (((PTR)->ADDR_NAME) = (VAL)) | 
|  | #define pci_unmap_len(PTR, LEN_NAME)			\ | 
|  | ((PTR)->LEN_NAME) | 
|  | #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\ | 
|  | (((PTR)->LEN_NAME) = (VAL)) | 
|  |  | 
|  | /* The PCI address space does not equal the physical memory address | 
|  | * space (we have an IOMMU).  The IDE and SCSI device layers use | 
|  | * this boolean for bounce buffer decisions. | 
|  | */ | 
|  | #define PCI_DMA_BUS_IS_PHYS	(0) | 
|  |  | 
|  | #else /* 32-bit */ | 
|  |  | 
|  | /* The PCI address space does equal the physical memory | 
|  | * address space (no IOMMU).  The IDE and SCSI device layers use | 
|  | * this boolean for bounce buffer decisions. | 
|  | */ | 
|  | #define PCI_DMA_BUS_IS_PHYS     (1) | 
|  |  | 
|  | /* pci_unmap_{page,single} is a nop so... */ | 
|  | #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) | 
|  | #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) | 
|  | #define pci_unmap_addr(PTR, ADDR_NAME)		(0) | 
|  | #define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0) | 
|  | #define pci_unmap_len(PTR, LEN_NAME)		(0) | 
|  | #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0) | 
|  |  | 
|  | #endif /* CONFIG_PPC64 */ | 
|  |  | 
|  | extern void pcibios_resource_to_bus(struct pci_dev *dev, | 
|  | struct pci_bus_region *region, | 
|  | struct resource *res); | 
|  |  | 
|  | extern void pcibios_bus_to_resource(struct pci_dev *dev, | 
|  | struct resource *res, | 
|  | struct pci_bus_region *region); | 
|  |  | 
|  | static inline struct resource *pcibios_select_root(struct pci_dev *pdev, | 
|  | struct resource *res) | 
|  | { | 
|  | struct resource *root = NULL; | 
|  |  | 
|  | if (res->flags & IORESOURCE_IO) | 
|  | root = &ioport_resource; | 
|  | if (res->flags & IORESOURCE_MEM) | 
|  | root = &iomem_resource; | 
|  |  | 
|  | return root; | 
|  | } | 
|  |  | 
|  | extern int unmap_bus_range(struct pci_bus *bus); | 
|  |  | 
|  | extern int remap_bus_range(struct pci_bus *bus); | 
|  |  | 
|  | extern void pcibios_fixup_device_resources(struct pci_dev *dev, | 
|  | struct pci_bus *bus); | 
|  |  | 
|  | extern void pcibios_claim_one_bus(struct pci_bus *b); | 
|  |  | 
|  | extern struct pci_controller *init_phb_dynamic(struct device_node *dn); | 
|  |  | 
|  | extern struct pci_dev *of_create_pci_dev(struct device_node *node, | 
|  | struct pci_bus *bus, int devfn); | 
|  |  | 
|  | extern void of_scan_pci_bridge(struct device_node *node, | 
|  | struct pci_dev *dev); | 
|  |  | 
|  | extern void of_scan_bus(struct device_node *node, struct pci_bus *bus); | 
|  |  | 
|  | extern int pci_read_irq_line(struct pci_dev *dev); | 
|  |  | 
|  | extern void pcibios_add_platform_entries(struct pci_dev *dev); | 
|  |  | 
|  | struct file; | 
|  | extern pgprot_t	pci_phys_mem_access_prot(struct file *file, | 
|  | unsigned long pfn, | 
|  | unsigned long size, | 
|  | pgprot_t prot); | 
|  |  | 
|  | #if defined(CONFIG_PPC_MULTIPLATFORM) || defined(CONFIG_PPC32) | 
|  | #define HAVE_ARCH_PCI_RESOURCE_TO_USER | 
|  | extern void pci_resource_to_user(const struct pci_dev *dev, int bar, | 
|  | const struct resource *rsrc, | 
|  | u64 *start, u64 *end); | 
|  | #endif /* CONFIG_PPC_MULTIPLATFORM || CONFIG_PPC32 */ | 
|  |  | 
|  | #endif	/* __KERNEL__ */ | 
|  | #endif /* __ASM_POWERPC_PCI_H */ |