| /* |
| * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. |
| */ |
| #ifndef _ASM_POWERPC_PPC_ASM_H |
| #define _ASM_POWERPC_PPC_ASM_H |
| |
| #include <linux/stringify.h> |
| #include <linux/config.h> |
| #include <asm/asm-compat.h> |
| |
| #ifndef __ASSEMBLY__ |
| #error __FILE__ should only be used in assembler files |
| #else |
| |
| #define SZL (BITS_PER_LONG/8) |
| |
| /* |
| * Macros for storing registers into and loading registers from |
| * exception frames. |
| */ |
| #ifdef __powerpc64__ |
| #define SAVE_GPR(n, base) std n,GPR0+8*(n)(base) |
| #define REST_GPR(n, base) ld n,GPR0+8*(n)(base) |
| #define SAVE_NVGPRS(base) SAVE_8GPRS(14, base); SAVE_10GPRS(22, base) |
| #define REST_NVGPRS(base) REST_8GPRS(14, base); REST_10GPRS(22, base) |
| #else |
| #define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base) |
| #define REST_GPR(n, base) lwz n,GPR0+4*(n)(base) |
| #define SAVE_NVGPRS(base) SAVE_GPR(13, base); SAVE_8GPRS(14, base); \ |
| SAVE_10GPRS(22, base) |
| #define REST_NVGPRS(base) REST_GPR(13, base); REST_8GPRS(14, base); \ |
| REST_10GPRS(22, base) |
| #endif |
| |
| |
| #define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) |
| #define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) |
| #define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base) |
| #define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base) |
| #define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base) |
| #define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base) |
| #define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) |
| #define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) |
| |
| #define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base) |
| #define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) |
| #define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) |
| #define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) |
| #define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) |
| #define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) |
| #define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base) |
| #define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) |
| #define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) |
| #define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) |
| #define REST_16FPRS(n, base) REST_8FPRS(n, base); REST_8FPRS(n+8, base) |
| #define REST_32FPRS(n, base) REST_16FPRS(n, base); REST_16FPRS(n+16, base) |
| |
| #define SAVE_VR(n,b,base) li b,THREAD_VR0+(16*(n)); stvx n,b,base |
| #define SAVE_2VRS(n,b,base) SAVE_VR(n,b,base); SAVE_VR(n+1,b,base) |
| #define SAVE_4VRS(n,b,base) SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base) |
| #define SAVE_8VRS(n,b,base) SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base) |
| #define SAVE_16VRS(n,b,base) SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base) |
| #define SAVE_32VRS(n,b,base) SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base) |
| #define REST_VR(n,b,base) li b,THREAD_VR0+(16*(n)); lvx n,b,base |
| #define REST_2VRS(n,b,base) REST_VR(n,b,base); REST_VR(n+1,b,base) |
| #define REST_4VRS(n,b,base) REST_2VRS(n,b,base); REST_2VRS(n+2,b,base) |
| #define REST_8VRS(n,b,base) REST_4VRS(n,b,base); REST_4VRS(n+4,b,base) |
| #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) |
| #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) |
| |
| #define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) |
| #define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) |
| #define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) |
| #define SAVE_8EVRS(n,s,base) SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base) |
| #define SAVE_16EVRS(n,s,base) SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base) |
| #define SAVE_32EVRS(n,s,base) SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base) |
| #define REST_EVR(n,s,base) lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n |
| #define REST_2EVRS(n,s,base) REST_EVR(n,s,base); REST_EVR(n+1,s,base) |
| #define REST_4EVRS(n,s,base) REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base) |
| #define REST_8EVRS(n,s,base) REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base) |
| #define REST_16EVRS(n,s,base) REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base) |
| #define REST_32EVRS(n,s,base) REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base) |
| |
| /* Macros to adjust thread priority for hardware multithreading */ |
| #define HMT_VERY_LOW or 31,31,31 # very low priority |
| #define HMT_LOW or 1,1,1 |
| #define HMT_MEDIUM_LOW or 6,6,6 # medium low priority |
| #define HMT_MEDIUM or 2,2,2 |
| #define HMT_MEDIUM_HIGH or 5,5,5 # medium high priority |
| #define HMT_HIGH or 3,3,3 |
| |
| /* handle instructions that older assemblers may not know */ |
| #define RFCI .long 0x4c000066 /* rfci instruction */ |
| #define RFDI .long 0x4c00004e /* rfdi instruction */ |
| #define RFMCI .long 0x4c00004c /* rfmci instruction */ |
| |
| #ifdef __KERNEL__ |
| #ifdef CONFIG_PPC64 |
| |
| #define XGLUE(a,b) a##b |
| #define GLUE(a,b) XGLUE(a,b) |
| |
| #define _GLOBAL(name) \ |
| .section ".text"; \ |
| .align 2 ; \ |
| .globl name; \ |
| .globl GLUE(.,name); \ |
| .section ".opd","aw"; \ |
| name: \ |
| .quad GLUE(.,name); \ |
| .quad .TOC.@tocbase; \ |
| .quad 0; \ |
| .previous; \ |
| .type GLUE(.,name),@function; \ |
| GLUE(.,name): |
| |
| #define _KPROBE(name) \ |
| .section ".kprobes.text","a"; \ |
| .align 2 ; \ |
| .globl name; \ |
| .globl GLUE(.,name); \ |
| .section ".opd","aw"; \ |
| name: \ |
| .quad GLUE(.,name); \ |
| .quad .TOC.@tocbase; \ |
| .quad 0; \ |
| .previous; \ |
| .type GLUE(.,name),@function; \ |
| GLUE(.,name): |
| |
| #define _STATIC(name) \ |
| .section ".text"; \ |
| .align 2 ; \ |
| .section ".opd","aw"; \ |
| name: \ |
| .quad GLUE(.,name); \ |
| .quad .TOC.@tocbase; \ |
| .quad 0; \ |
| .previous; \ |
| .type GLUE(.,name),@function; \ |
| GLUE(.,name): |
| |
| #else /* 32-bit */ |
| |
| #define _GLOBAL(n) \ |
| .text; \ |
| .stabs __stringify(n:F-1),N_FUN,0,0,n;\ |
| .globl n; \ |
| n: |
| |
| #define _KPROBE(n) \ |
| .section ".kprobes.text","a"; \ |
| .globl n; \ |
| n: |
| |
| #endif |
| |
| /* |
| * LOAD_REG_IMMEDIATE(rn, expr) |
| * Loads the value of the constant expression 'expr' into register 'rn' |
| * using immediate instructions only. Use this when it's important not |
| * to reference other data (i.e. on ppc64 when the TOC pointer is not |
| * valid). |
| * |
| * LOAD_REG_ADDR(rn, name) |
| * Loads the address of label 'name' into register 'rn'. Use this when |
| * you don't particularly need immediate instructions only, but you need |
| * the whole address in one register (e.g. it's a structure address and |
| * you want to access various offsets within it). On ppc32 this is |
| * identical to LOAD_REG_IMMEDIATE. |
| * |
| * LOAD_REG_ADDRBASE(rn, name) |
| * ADDROFF(name) |
| * LOAD_REG_ADDRBASE loads part of the address of label 'name' into |
| * register 'rn'. ADDROFF(name) returns the remainder of the address as |
| * a constant expression. ADDROFF(name) is a signed expression < 16 bits |
| * in size, so is suitable for use directly as an offset in load and store |
| * instructions. Use this when loading/storing a single word or less as: |
| * LOAD_REG_ADDRBASE(rX, name) |
| * ld rY,ADDROFF(name)(rX) |
| */ |
| #ifdef __powerpc64__ |
| #define LOAD_REG_IMMEDIATE(reg,expr) \ |
| lis (reg),(expr)@highest; \ |
| ori (reg),(reg),(expr)@higher; \ |
| rldicr (reg),(reg),32,31; \ |
| oris (reg),(reg),(expr)@h; \ |
| ori (reg),(reg),(expr)@l; |
| |
| #define LOAD_REG_ADDR(reg,name) \ |
| ld (reg),name@got(r2) |
| |
| #define LOAD_REG_ADDRBASE(reg,name) LOAD_REG_ADDR(reg,name) |
| #define ADDROFF(name) 0 |
| |
| /* offsets for stack frame layout */ |
| #define LRSAVE 16 |
| |
| #else /* 32-bit */ |
| |
| #define LOAD_REG_IMMEDIATE(reg,expr) \ |
| lis (reg),(expr)@ha; \ |
| addi (reg),(reg),(expr)@l; |
| |
| #define LOAD_REG_ADDR(reg,name) LOAD_REG_IMMEDIATE(reg, name) |
| |
| #define LOAD_REG_ADDRBASE(reg, name) lis (reg),name@ha |
| #define ADDROFF(name) name@l |
| |
| /* offsets for stack frame layout */ |
| #define LRSAVE 4 |
| |
| #endif |
| |
| /* various errata or part fixups */ |
| #ifdef CONFIG_PPC601_SYNC_FIX |
| #define SYNC \ |
| BEGIN_FTR_SECTION \ |
| sync; \ |
| isync; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_601) |
| #define SYNC_601 \ |
| BEGIN_FTR_SECTION \ |
| sync; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_601) |
| #define ISYNC_601 \ |
| BEGIN_FTR_SECTION \ |
| isync; \ |
| END_FTR_SECTION_IFSET(CPU_FTR_601) |
| #else |
| #define SYNC |
| #define SYNC_601 |
| #define ISYNC_601 |
| #endif |
| |
| |
| #ifndef CONFIG_SMP |
| #define TLBSYNC |
| #else /* CONFIG_SMP */ |
| /* tlbsync is not implemented on 601 */ |
| #define TLBSYNC \ |
| BEGIN_FTR_SECTION \ |
| tlbsync; \ |
| sync; \ |
| END_FTR_SECTION_IFCLR(CPU_FTR_601) |
| #endif |
| |
| |
| /* |
| * This instruction is not implemented on the PPC 603 or 601; however, on |
| * the 403GCX and 405GP tlbia IS defined and tlbie is not. |
| * All of these instructions exist in the 8xx, they have magical powers, |
| * and they must be used. |
| */ |
| |
| #if !defined(CONFIG_4xx) && !defined(CONFIG_8xx) |
| #define tlbia \ |
| li r4,1024; \ |
| mtctr r4; \ |
| lis r4,KERNELBASE@h; \ |
| 0: tlbie r4; \ |
| addi r4,r4,0x1000; \ |
| bdnz 0b |
| #endif |
| |
| |
| #ifdef CONFIG_IBM440EP_ERR42 |
| #define PPC440EP_ERR42 isync |
| #else |
| #define PPC440EP_ERR42 |
| #endif |
| |
| |
| #if defined(CONFIG_BOOKE) |
| #define toreal(rd) |
| #define fromreal(rd) |
| |
| #define tophys(rd,rs) \ |
| addis rd,rs,0 |
| |
| #define tovirt(rd,rs) \ |
| addis rd,rs,0 |
| |
| #elif defined(CONFIG_PPC64) |
| #define toreal(rd) /* we can access c000... in real mode */ |
| #define fromreal(rd) |
| |
| #define tophys(rd,rs) \ |
| clrldi rd,rs,2 |
| |
| #define tovirt(rd,rs) \ |
| rotldi rd,rs,16; \ |
| ori rd,rd,((KERNELBASE>>48)&0xFFFF);\ |
| rotldi rd,rd,48 |
| #else |
| /* |
| * On APUS (Amiga PowerPC cpu upgrade board), we don't know the |
| * physical base address of RAM at compile time. |
| */ |
| #define toreal(rd) tophys(rd,rd) |
| #define fromreal(rd) tovirt(rd,rd) |
| |
| #define tophys(rd,rs) \ |
| 0: addis rd,rs,-KERNELBASE@h; \ |
| .section ".vtop_fixup","aw"; \ |
| .align 1; \ |
| .long 0b; \ |
| .previous |
| |
| #define tovirt(rd,rs) \ |
| 0: addis rd,rs,KERNELBASE@h; \ |
| .section ".ptov_fixup","aw"; \ |
| .align 1; \ |
| .long 0b; \ |
| .previous |
| #endif |
| |
| #ifdef CONFIG_PPC64 |
| #define RFI rfid |
| #define MTMSRD(r) mtmsrd r |
| |
| #else |
| #define FIX_SRR1(ra, rb) |
| #ifndef CONFIG_40x |
| #define RFI rfi |
| #else |
| #define RFI rfi; b . /* Prevent prefetch past rfi */ |
| #endif |
| #define MTMSRD(r) mtmsr r |
| #define CLR_TOP32(r) |
| #endif |
| |
| #endif /* __KERNEL__ */ |
| |
| /* The boring bits... */ |
| |
| /* Condition Register Bit Fields */ |
| |
| #define cr0 0 |
| #define cr1 1 |
| #define cr2 2 |
| #define cr3 3 |
| #define cr4 4 |
| #define cr5 5 |
| #define cr6 6 |
| #define cr7 7 |
| |
| |
| /* General Purpose Registers (GPRs) */ |
| |
| #define r0 0 |
| #define r1 1 |
| #define r2 2 |
| #define r3 3 |
| #define r4 4 |
| #define r5 5 |
| #define r6 6 |
| #define r7 7 |
| #define r8 8 |
| #define r9 9 |
| #define r10 10 |
| #define r11 11 |
| #define r12 12 |
| #define r13 13 |
| #define r14 14 |
| #define r15 15 |
| #define r16 16 |
| #define r17 17 |
| #define r18 18 |
| #define r19 19 |
| #define r20 20 |
| #define r21 21 |
| #define r22 22 |
| #define r23 23 |
| #define r24 24 |
| #define r25 25 |
| #define r26 26 |
| #define r27 27 |
| #define r28 28 |
| #define r29 29 |
| #define r30 30 |
| #define r31 31 |
| |
| |
| /* Floating Point Registers (FPRs) */ |
| |
| #define fr0 0 |
| #define fr1 1 |
| #define fr2 2 |
| #define fr3 3 |
| #define fr4 4 |
| #define fr5 5 |
| #define fr6 6 |
| #define fr7 7 |
| #define fr8 8 |
| #define fr9 9 |
| #define fr10 10 |
| #define fr11 11 |
| #define fr12 12 |
| #define fr13 13 |
| #define fr14 14 |
| #define fr15 15 |
| #define fr16 16 |
| #define fr17 17 |
| #define fr18 18 |
| #define fr19 19 |
| #define fr20 20 |
| #define fr21 21 |
| #define fr22 22 |
| #define fr23 23 |
| #define fr24 24 |
| #define fr25 25 |
| #define fr26 26 |
| #define fr27 27 |
| #define fr28 28 |
| #define fr29 29 |
| #define fr30 30 |
| #define fr31 31 |
| |
| /* AltiVec Registers (VPRs) */ |
| |
| #define vr0 0 |
| #define vr1 1 |
| #define vr2 2 |
| #define vr3 3 |
| #define vr4 4 |
| #define vr5 5 |
| #define vr6 6 |
| #define vr7 7 |
| #define vr8 8 |
| #define vr9 9 |
| #define vr10 10 |
| #define vr11 11 |
| #define vr12 12 |
| #define vr13 13 |
| #define vr14 14 |
| #define vr15 15 |
| #define vr16 16 |
| #define vr17 17 |
| #define vr18 18 |
| #define vr19 19 |
| #define vr20 20 |
| #define vr21 21 |
| #define vr22 22 |
| #define vr23 23 |
| #define vr24 24 |
| #define vr25 25 |
| #define vr26 26 |
| #define vr27 27 |
| #define vr28 28 |
| #define vr29 29 |
| #define vr30 30 |
| #define vr31 31 |
| |
| /* SPE Registers (EVPRs) */ |
| |
| #define evr0 0 |
| #define evr1 1 |
| #define evr2 2 |
| #define evr3 3 |
| #define evr4 4 |
| #define evr5 5 |
| #define evr6 6 |
| #define evr7 7 |
| #define evr8 8 |
| #define evr9 9 |
| #define evr10 10 |
| #define evr11 11 |
| #define evr12 12 |
| #define evr13 13 |
| #define evr14 14 |
| #define evr15 15 |
| #define evr16 16 |
| #define evr17 17 |
| #define evr18 18 |
| #define evr19 19 |
| #define evr20 20 |
| #define evr21 21 |
| #define evr22 22 |
| #define evr23 23 |
| #define evr24 24 |
| #define evr25 25 |
| #define evr26 26 |
| #define evr27 27 |
| #define evr28 28 |
| #define evr29 29 |
| #define evr30 30 |
| #define evr31 31 |
| |
| /* some stab codes */ |
| #define N_FUN 36 |
| #define N_RSYM 64 |
| #define N_SLINE 68 |
| #define N_SO 100 |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* _ASM_POWERPC_PPC_ASM_H */ |