fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform data
This is a preparation for HDMI hotplug support. This patch just moves all
platform defined video modes for the sh_mobile_lcdcfb driver to separate
arrays and switches all users to use element 0 of that array, so, this patch
doesn't introduce any functional changes and as such should not cause any
regressions.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 1d7b495..feadf5d 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -231,14 +231,41 @@
};
/* LCDC */
+const static struct fb_videomode ecovec_lcd_modes[] = {
+ {
+ .name = "Panel",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 70,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
+const static struct fb_videomode ecovec_dvi_modes[] = {
+ {
+ .name = "DVI",
+ .xres = 1280,
+ .yres = 720,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+};
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.interface_type = RGB18,
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
- .lcd_cfg = {
- .sync = 0, /* hsync and vsync are active low */
- },
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
@@ -1079,33 +1106,18 @@
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
- lcdc_info.ch[0].clock_divider = 1,
- lcdc_info.ch[0].lcd_cfg.name = "DVI";
- lcdc_info.ch[0].lcd_cfg.xres = 1280;
- lcdc_info.ch[0].lcd_cfg.yres = 720;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 1;
+ lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes);
gpio_set_value(GPIO_PTA2, 1);
gpio_set_value(GPIO_PTU1, 1);
} else {
/* Panel */
-
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
- lcdc_info.ch[0].clock_divider = 2,
- lcdc_info.ch[0].lcd_cfg.name = "Panel";
- lcdc_info.ch[0].lcd_cfg.xres = 800;
- lcdc_info.ch[0].lcd_cfg.yres = 480;
- lcdc_info.ch[0].lcd_cfg.left_margin = 220;
- lcdc_info.ch[0].lcd_cfg.right_margin = 110;
- lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
- lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
- lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
- lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
+ lcdc_info.ch[0].clock_divider = 2;
+ lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes;
+ lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes);
gpio_set_value(GPIO_PTR1, 1);