| /* | 
 |  * linux/arch/arm/mach-ep93xx/gpio.c | 
 |  * | 
 |  * Generic EP93xx GPIO handling | 
 |  * | 
 |  * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> | 
 |  * | 
 |  * Based on code originally from: | 
 |  *  linux/arch/arm/mach-ep93xx/core.c | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License version 2 as | 
 |  *  published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/io.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/irq.h> | 
 |  | 
 | #include <mach/hardware.h> | 
 |  | 
 | /************************************************************************* | 
 |  * Interrupt handling for EP93xx on-chip GPIOs | 
 |  *************************************************************************/ | 
 | static unsigned char gpio_int_unmasked[3]; | 
 | static unsigned char gpio_int_enabled[3]; | 
 | static unsigned char gpio_int_type1[3]; | 
 | static unsigned char gpio_int_type2[3]; | 
 | static unsigned char gpio_int_debounce[3]; | 
 |  | 
 | /* Port ordering is: A B F */ | 
 | static const u8 int_type1_register_offset[3]	= { 0x90, 0xac, 0x4c }; | 
 | static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 }; | 
 | static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 }; | 
 | static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x58 }; | 
 | static const u8 int_debounce_register_offset[3]	= { 0xa8, 0xc4, 0x64 }; | 
 |  | 
 | static void ep93xx_gpio_update_int_params(unsigned port) | 
 | { | 
 | 	BUG_ON(port > 2); | 
 |  | 
 | 	__raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); | 
 |  | 
 | 	__raw_writeb(gpio_int_type2[port], | 
 | 		EP93XX_GPIO_REG(int_type2_register_offset[port])); | 
 |  | 
 | 	__raw_writeb(gpio_int_type1[port], | 
 | 		EP93XX_GPIO_REG(int_type1_register_offset[port])); | 
 |  | 
 | 	__raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], | 
 | 		EP93XX_GPIO_REG(int_en_register_offset[port])); | 
 | } | 
 |  | 
 | static inline void ep93xx_gpio_int_mask(unsigned line) | 
 | { | 
 | 	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); | 
 | } | 
 |  | 
 | void ep93xx_gpio_int_debounce(unsigned int irq, int enable) | 
 | { | 
 | 	int line = irq_to_gpio(irq); | 
 | 	int port = line >> 3; | 
 | 	int port_mask = 1 << (line & 7); | 
 |  | 
 | 	if (enable) | 
 | 		gpio_int_debounce[port] |= port_mask; | 
 | 	else | 
 | 		gpio_int_debounce[port] &= ~port_mask; | 
 |  | 
 | 	__raw_writeb(gpio_int_debounce[port], | 
 | 		EP93XX_GPIO_REG(int_debounce_register_offset[port])); | 
 | } | 
 | EXPORT_SYMBOL(ep93xx_gpio_int_debounce); | 
 |  | 
 | static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) | 
 | { | 
 | 	unsigned char status; | 
 | 	int i; | 
 |  | 
 | 	status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		if (status & (1 << i)) { | 
 | 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; | 
 | 			generic_handle_irq(gpio_irq); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); | 
 | 	for (i = 0; i < 8; i++) { | 
 | 		if (status & (1 << i)) { | 
 | 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; | 
 | 			generic_handle_irq(gpio_irq); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) | 
 | { | 
 | 	/* | 
 | 	 * map discontiguous hw irq range to continous sw irq range: | 
 | 	 * | 
 | 	 *  IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) | 
 | 	 */ | 
 | 	int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ | 
 | 	int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; | 
 |  | 
 | 	generic_handle_irq(gpio_irq); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_irq_ack(unsigned int irq) | 
 | { | 
 | 	int line = irq_to_gpio(irq); | 
 | 	int port = line >> 3; | 
 | 	int port_mask = 1 << (line & 7); | 
 |  | 
 | 	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { | 
 | 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */ | 
 | 		ep93xx_gpio_update_int_params(port); | 
 | 	} | 
 |  | 
 | 	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_irq_mask_ack(unsigned int irq) | 
 | { | 
 | 	int line = irq_to_gpio(irq); | 
 | 	int port = line >> 3; | 
 | 	int port_mask = 1 << (line & 7); | 
 |  | 
 | 	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) | 
 | 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */ | 
 |  | 
 | 	gpio_int_unmasked[port] &= ~port_mask; | 
 | 	ep93xx_gpio_update_int_params(port); | 
 |  | 
 | 	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_irq_mask(unsigned int irq) | 
 | { | 
 | 	int line = irq_to_gpio(irq); | 
 | 	int port = line >> 3; | 
 |  | 
 | 	gpio_int_unmasked[port] &= ~(1 << (line & 7)); | 
 | 	ep93xx_gpio_update_int_params(port); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_irq_unmask(unsigned int irq) | 
 | { | 
 | 	int line = irq_to_gpio(irq); | 
 | 	int port = line >> 3; | 
 |  | 
 | 	gpio_int_unmasked[port] |= 1 << (line & 7); | 
 | 	ep93xx_gpio_update_int_params(port); | 
 | } | 
 |  | 
 | /* | 
 |  * gpio_int_type1 controls whether the interrupt is level (0) or | 
 |  * edge (1) triggered, while gpio_int_type2 controls whether it | 
 |  * triggers on low/falling (0) or high/rising (1). | 
 |  */ | 
 | static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) | 
 | { | 
 | 	struct irq_desc *desc = irq_desc + irq; | 
 | 	const int gpio = irq_to_gpio(irq); | 
 | 	const int port = gpio >> 3; | 
 | 	const int port_mask = 1 << (gpio & 7); | 
 |  | 
 | 	gpio_direction_input(gpio); | 
 |  | 
 | 	switch (type) { | 
 | 	case IRQ_TYPE_EDGE_RISING: | 
 | 		gpio_int_type1[port] |= port_mask; | 
 | 		gpio_int_type2[port] |= port_mask; | 
 | 		desc->handle_irq = handle_edge_irq; | 
 | 		break; | 
 | 	case IRQ_TYPE_EDGE_FALLING: | 
 | 		gpio_int_type1[port] |= port_mask; | 
 | 		gpio_int_type2[port] &= ~port_mask; | 
 | 		desc->handle_irq = handle_edge_irq; | 
 | 		break; | 
 | 	case IRQ_TYPE_LEVEL_HIGH: | 
 | 		gpio_int_type1[port] &= ~port_mask; | 
 | 		gpio_int_type2[port] |= port_mask; | 
 | 		desc->handle_irq = handle_level_irq; | 
 | 		break; | 
 | 	case IRQ_TYPE_LEVEL_LOW: | 
 | 		gpio_int_type1[port] &= ~port_mask; | 
 | 		gpio_int_type2[port] &= ~port_mask; | 
 | 		desc->handle_irq = handle_level_irq; | 
 | 		break; | 
 | 	case IRQ_TYPE_EDGE_BOTH: | 
 | 		gpio_int_type1[port] |= port_mask; | 
 | 		/* set initial polarity based on current input level */ | 
 | 		if (gpio_get_value(gpio)) | 
 | 			gpio_int_type2[port] &= ~port_mask; /* falling */ | 
 | 		else | 
 | 			gpio_int_type2[port] |= port_mask; /* rising */ | 
 | 		desc->handle_irq = handle_edge_irq; | 
 | 		break; | 
 | 	default: | 
 | 		pr_err("failed to set irq type %d for gpio %d\n", type, gpio); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	gpio_int_enabled[port] |= port_mask; | 
 |  | 
 | 	desc->status &= ~IRQ_TYPE_SENSE_MASK; | 
 | 	desc->status |= type & IRQ_TYPE_SENSE_MASK; | 
 |  | 
 | 	ep93xx_gpio_update_int_params(port); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct irq_chip ep93xx_gpio_irq_chip = { | 
 | 	.name		= "GPIO", | 
 | 	.ack		= ep93xx_gpio_irq_ack, | 
 | 	.mask_ack	= ep93xx_gpio_irq_mask_ack, | 
 | 	.mask		= ep93xx_gpio_irq_mask, | 
 | 	.unmask		= ep93xx_gpio_irq_unmask, | 
 | 	.set_type	= ep93xx_gpio_irq_type, | 
 | }; | 
 |  | 
 | void __init ep93xx_gpio_init_irq(void) | 
 | { | 
 | 	int gpio_irq; | 
 |  | 
 | 	for (gpio_irq = gpio_to_irq(0); | 
 | 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { | 
 | 		set_irq_chip(gpio_irq, &ep93xx_gpio_irq_chip); | 
 | 		set_irq_handler(gpio_irq, handle_level_irq); | 
 | 		set_irq_flags(gpio_irq, IRQF_VALID); | 
 | 	} | 
 |  | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler); | 
 | 	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler); | 
 | } | 
 |  | 
 |  | 
 | /************************************************************************* | 
 |  * gpiolib interface for EP93xx on-chip GPIOs | 
 |  *************************************************************************/ | 
 | struct ep93xx_gpio_chip { | 
 | 	struct gpio_chip	chip; | 
 |  | 
 | 	void __iomem		*data_reg; | 
 | 	void __iomem		*data_dir_reg; | 
 | }; | 
 |  | 
 | #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) | 
 |  | 
 | static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); | 
 | 	unsigned long flags; | 
 | 	u8 v; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	v = __raw_readb(ep93xx_chip->data_dir_reg); | 
 | 	v &= ~(1 << offset); | 
 | 	__raw_writeb(v, ep93xx_chip->data_dir_reg); | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ep93xx_gpio_direction_output(struct gpio_chip *chip, | 
 | 					unsigned offset, int val) | 
 | { | 
 | 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); | 
 | 	unsigned long flags; | 
 | 	int line; | 
 | 	u8 v; | 
 |  | 
 | 	local_irq_save(flags); | 
 |  | 
 | 	/* Set the value */ | 
 | 	v = __raw_readb(ep93xx_chip->data_reg); | 
 | 	if (val) | 
 | 		v |= (1 << offset); | 
 | 	else | 
 | 		v &= ~(1 << offset); | 
 | 	__raw_writeb(v, ep93xx_chip->data_reg); | 
 |  | 
 | 	/* Drive as an output */ | 
 | 	line = chip->base + offset; | 
 | 	if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { | 
 | 		/* Ports A/B/F */ | 
 | 		ep93xx_gpio_int_mask(line); | 
 | 		ep93xx_gpio_update_int_params(line >> 3); | 
 | 	} | 
 |  | 
 | 	v = __raw_readb(ep93xx_chip->data_dir_reg); | 
 | 	v |= (1 << offset); | 
 | 	__raw_writeb(v, ep93xx_chip->data_dir_reg); | 
 |  | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) | 
 | { | 
 | 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); | 
 |  | 
 | 	return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) | 
 | { | 
 | 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); | 
 | 	unsigned long flags; | 
 | 	u8 v; | 
 |  | 
 | 	local_irq_save(flags); | 
 | 	v = __raw_readb(ep93xx_chip->data_reg); | 
 | 	if (val) | 
 | 		v |= (1 << offset); | 
 | 	else | 
 | 		v &= ~(1 << offset); | 
 | 	__raw_writeb(v, ep93xx_chip->data_reg); | 
 | 	local_irq_restore(flags); | 
 | } | 
 |  | 
 | static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) | 
 | { | 
 | 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); | 
 | 	u8 data_reg, data_dir_reg; | 
 | 	int gpio, i; | 
 |  | 
 | 	data_reg = __raw_readb(ep93xx_chip->data_reg); | 
 | 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg); | 
 |  | 
 | 	gpio = ep93xx_chip->chip.base; | 
 | 	for (i = 0; i < chip->ngpio; i++, gpio++) { | 
 | 		int is_out = data_dir_reg & (1 << i); | 
 |  | 
 | 		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s", | 
 | 				chip->label, i, gpio, | 
 | 				gpiochip_is_requested(chip, i) ? : "", | 
 | 				is_out ? "out" : "in ", | 
 | 				(data_reg & (1 << i)) ? "hi" : "lo"); | 
 |  | 
 | 		if (!is_out) { | 
 | 			int irq = gpio_to_irq(gpio); | 
 | 			struct irq_desc *desc = irq_desc + irq; | 
 |  | 
 | 			if (irq >= 0 && desc->action) { | 
 | 				char *trigger; | 
 |  | 
 | 				switch (desc->status & IRQ_TYPE_SENSE_MASK) { | 
 | 				case IRQ_TYPE_NONE: | 
 | 					trigger = "(default)"; | 
 | 					break; | 
 | 				case IRQ_TYPE_EDGE_FALLING: | 
 | 					trigger = "edge-falling"; | 
 | 					break; | 
 | 				case IRQ_TYPE_EDGE_RISING: | 
 | 					trigger = "edge-rising"; | 
 | 					break; | 
 | 				case IRQ_TYPE_EDGE_BOTH: | 
 | 					trigger = "edge-both"; | 
 | 					break; | 
 | 				case IRQ_TYPE_LEVEL_HIGH: | 
 | 					trigger = "level-high"; | 
 | 					break; | 
 | 				case IRQ_TYPE_LEVEL_LOW: | 
 | 					trigger = "level-low"; | 
 | 					break; | 
 | 				default: | 
 | 					trigger = "?trigger?"; | 
 | 					break; | 
 | 				} | 
 |  | 
 | 				seq_printf(s, " irq-%d %s%s", | 
 | 						irq, trigger, | 
 | 						(desc->status & IRQ_WAKEUP) | 
 | 							? " wakeup" : ""); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		seq_printf(s, "\n"); | 
 | 	} | 
 | } | 
 |  | 
 | #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\ | 
 | 	{								\ | 
 | 		.chip = {						\ | 
 | 			.label		  = name,			\ | 
 | 			.direction_input  = ep93xx_gpio_direction_input, \ | 
 | 			.direction_output = ep93xx_gpio_direction_output, \ | 
 | 			.get		  = ep93xx_gpio_get,		\ | 
 | 			.set		  = ep93xx_gpio_set,		\ | 
 | 			.dbg_show	  = ep93xx_gpio_dbg_show,	\ | 
 | 			.base		  = base_gpio,			\ | 
 | 			.ngpio		  = 8,				\ | 
 | 		},							\ | 
 | 		.data_reg	= EP93XX_GPIO_REG(dr),			\ | 
 | 		.data_dir_reg	= EP93XX_GPIO_REG(ddr),			\ | 
 | 	} | 
 |  | 
 | static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { | 
 | 	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), | 
 | 	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), | 
 | 	EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), | 
 | 	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), | 
 | 	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), | 
 | 	EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), | 
 | 	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), | 
 | 	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), | 
 | }; | 
 |  | 
 | void __init ep93xx_gpio_init(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) | 
 | 		gpiochip_add(&ep93xx_gpio_banks[i].chip); | 
 | } |