drivers/net: Trim trailing whitespace
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index a3d515d..4ee8790 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -496,7 +496,7 @@
static void speedo_show_state(struct net_device *dev);
static struct ethtool_ops ethtool_ops;
-
+
#ifdef honor_default_port
/* Optional driver feature to allow forcing the transceiver setting.
@@ -646,7 +646,7 @@
option = 0;
rtnl_lock();
- if (dev_alloc_name(dev, dev->name) < 0)
+ if (dev_alloc_name(dev, dev->name) < 0)
goto err_free_unlock;
/* Read the station address EEPROM before doing the reset.
@@ -825,10 +825,10 @@
sp->mii_if.dev = dev;
sp->mii_if.mdio_read = mdio_read;
sp->mii_if.mdio_write = mdio_write;
-
+
sp->rx_bug = (eeprom[3] & 0x03) == 3 ? 0 : 1;
- if (((pdev->device > 0x1030 && (pdev->device < 0x103F)))
- || (pdev->device == 0x2449) || (pdev->device == 0x2459)
+ if (((pdev->device > 0x1030 && (pdev->device < 0x103F)))
+ || (pdev->device == 0x2449) || (pdev->device == 0x2459)
|| (pdev->device == 0x245D)) {
sp->chip_id = 1;
}
@@ -1208,7 +1208,7 @@
int i;
if (netif_msg_pktdata(sp)) {
- printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n",
+ printk(KERN_DEBUG "%s: Tx ring dump, Tx queue %u / %u:\n",
dev->name, sp->cur_tx, sp->dirty_tx);
for (i = 0; i < TX_RING_SIZE; i++)
printk(KERN_DEBUG "%s: %c%c%2d %8.8x.\n", dev->name,
@@ -1586,7 +1586,7 @@
/* Always check if all rx buffers are allocated. --SAW */
speedo_refill_rx_buffers(dev, 0);
-
+
spin_lock(&sp->lock);
/*
* The chip may have suspended reception for various reasons.
@@ -1607,8 +1607,8 @@
/* these are all reserved values */
break;
}
-
-
+
+
/* User interrupt, Command/Tx unit interrupt or CU not active. */
if (status & 0xA400) {
speedo_tx_buffer_gc(dev);
@@ -1619,7 +1619,7 @@
netif_wake_queue(dev); /* Attention: under a spinlock. --SAW */
}
}
-
+
spin_unlock(&sp->lock);
if (--boguscnt < 0) {
@@ -2263,7 +2263,7 @@
sp->rx_mode = new_rx_mode;
}
-
+
#ifdef CONFIG_PM
static int eepro100_suspend(struct pci_dev *pdev, pm_message_t state)
{
@@ -2275,12 +2275,12 @@
if (!netif_running(dev))
return 0;
-
+
del_timer_sync(&sp->timer);
netif_device_detach(dev);
iowrite32(PortPartialReset, ioaddr + SCBPort);
-
+
/* XXX call pci_set_power_state ()? */
pci_disable_device(pdev);
pci_set_power_state (pdev, PCI_D3hot);
@@ -2324,7 +2324,7 @@
{
struct net_device *dev = pci_get_drvdata (pdev);
struct speedo_private *sp = netdev_priv(dev);
-
+
unregister_netdev(dev);
release_region(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1));
@@ -2337,7 +2337,7 @@
pci_disable_device(pdev);
free_netdev(dev);
}
-
+
static struct pci_device_id eepro100_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, 0x1229, PCI_ANY_ID, PCI_ANY_ID, },
{ PCI_VENDOR_ID_INTEL, 0x1209, PCI_ANY_ID, PCI_ANY_ID, },
@@ -2368,7 +2368,7 @@
{ 0,}
};
MODULE_DEVICE_TABLE(pci, eepro100_pci_tbl);
-
+
static struct pci_driver eepro100_driver = {
.name = "eepro100",
.id_table = eepro100_pci_tbl,
@@ -2395,7 +2395,7 @@
module_init(eepro100_init_module);
module_exit(eepro100_cleanup_module);
-
+
/*
* Local variables:
* compile-command: "gcc -DMODULE -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -c eepro100.c `[ -f /usr/include/linux/modversions.h ] && echo -DMODVERSIONS`"