iwlwifi: merge and better support of suspend/resume for iwlagn and iwl3945
With mac80211's help to call stop() and start() in mac80211
suspend/resume function, both iwlagn and iwl3945 no longer calling
stop() and start(); remove un-necessary STATUS_IN_SUSPEND bit from both
header files and functions,
Move apm_ops.stop() function into pci_suspend() to ensure
DMA is stopped before go into suspend mode.
iwl3945 has the similar suspend/resume function as iwlagn, so move both
functions to iwlcore to be shared by both drivers.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 3889158..2cb073e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1654,7 +1654,7 @@
ieee80211_stop_queues(priv->hw);
/* If we have not previously called iwl_init() then
- * clear all bits but the RF Kill and SUSPEND bits and return */
+ * clear all bits but the RF Kill bits and return */
if (!iwl_is_init(priv)) {
priv->status = test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
@@ -1662,23 +1662,19 @@
STATUS_RF_KILL_SW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
- test_bit(STATUS_IN_SUSPEND, &priv->status) <<
- STATUS_IN_SUSPEND |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
STATUS_EXIT_PENDING;
goto exit;
}
- /* ...otherwise clear out all the status bits but the RF Kill and
- * SUSPEND bits and continue taking the NIC down. */
+ /* ...otherwise clear out all the status bits but the RF Kill
+ * bits and continue taking the NIC down. */
priv->status &= test_bit(STATUS_RF_KILL_HW, &priv->status) <<
STATUS_RF_KILL_HW |
test_bit(STATUS_RF_KILL_SW, &priv->status) <<
STATUS_RF_KILL_SW |
test_bit(STATUS_GEO_CONFIGURED, &priv->status) <<
STATUS_GEO_CONFIGURED |
- test_bit(STATUS_IN_SUSPEND, &priv->status) <<
- STATUS_IN_SUSPEND |
test_bit(STATUS_FW_ERROR, &priv->status) <<
STATUS_FW_ERROR |
test_bit(STATUS_EXIT_PENDING, &priv->status) <<
@@ -1703,7 +1699,7 @@
udelay(5);
/* FIXME: apm_ops.suspend(priv) */
- if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+ if (exit_pending)
priv->cfg->ops->lib->apm_ops.stop(priv);
else
priv->cfg->ops->lib->apm_ops.reset(priv);
@@ -2064,9 +2060,6 @@
IWL_DEBUG_INFO(priv, "Start UP work done.\n");
- if (test_bit(STATUS_IN_SUSPEND, &priv->status))
- return 0;
-
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -3566,45 +3559,6 @@
ieee80211_free_hw(priv->hw);
}
-#ifdef CONFIG_PM
-
-static int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct iwl_priv *priv = pci_get_drvdata(pdev);
-
- if (priv->is_open) {
- set_bit(STATUS_IN_SUSPEND, &priv->status);
- iwl_mac_stop(priv->hw);
- priv->is_open = 1;
- }
-
- pci_save_state(pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-static int iwl_pci_resume(struct pci_dev *pdev)
-{
- struct iwl_priv *priv = pci_get_drvdata(pdev);
- int ret;
-
- pci_set_power_state(pdev, PCI_D0);
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
- pci_restore_state(pdev);
- iwl_enable_interrupts(priv);
-
- if (priv->is_open)
- iwl_mac_start(priv->hw);
-
- clear_bit(STATUS_IN_SUSPEND, &priv->status);
- return 0;
-}
-
-#endif /* CONFIG_PM */
/*****************************************************************************
*