Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release
bug fixes
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..b2297e5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@
return 0;
}
- if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+ if (intsrc->source_irq == 0) {
if (acpi_skip_timer_override) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ printk(PREFIX "BIOS IRQ0 override ignored.\n");
return 0;
}
- if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+ if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+ && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
}
@@ -1334,17 +1336,12 @@
}
/*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
*/
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
- /*
- * The ati_ixp4x0_rev() early PCI quirk should have set
- * the acpi_skip_timer_override flag already:
- */
if (!acpi_skip_timer_override) {
- WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
- pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+ pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
d->ident);
acpi_skip_timer_override = 1;
}
@@ -1438,7 +1435,7 @@
* is enabled. This input is incorrectly designated the
* ISA IRQ 0 via an interrupt source override even though
* it is wired to the output of the master 8259A and INTIN0
- * is not connected at all. Force ignoring BIOS IRQ0 pin2
+ * is not connected at all. Force ignoring BIOS IRQ0
* override in that cases.
*/
{
@@ -1473,6 +1470,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
},
},
+ {
+ .callback = dmi_ignore_irq0_timer_override,
+ .ident = "FUJITSU SIEMENS",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
{}
};
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 25b48ed..5de92f1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -451,6 +451,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
},
},
+ { /* Handle problems with rebooting on the Precision M6600. */
+ .callback = set_pci_reboot,
+ .ident = "Dell OptiPlex 990",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+ },
+ },
{ }
};
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index a43fa1a..1502c502 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -36,6 +36,7 @@
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
+static DEFINE_MUTEX(round_robin_lock);
static unsigned long power_saving_mwait_eax;
@@ -107,7 +108,7 @@
if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
return;
- mutex_lock(&isolated_cpus_lock);
+ mutex_lock(&round_robin_lock);
cpumask_clear(tmp);
for_each_cpu(cpu, pad_busy_cpus)
cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
@@ -116,7 +117,7 @@
if (cpumask_empty(tmp))
cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
if (cpumask_empty(tmp)) {
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
return;
}
for_each_cpu(cpu, tmp) {
@@ -131,7 +132,7 @@
tsk_in_cpu[tsk_index] = preferred_cpu;
cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
cpu_weight[preferred_cpu]++;
- mutex_unlock(&isolated_cpus_lock);
+ mutex_unlock(&round_robin_lock);
set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
}
diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 9f66181..240a244 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -173,7 +173,7 @@
{
int result = 0;
- if (!strncmp(val, "enable", strlen("enable") - 1)) {
+ if (!strncmp(val, "enable", strlen("enable"))) {
result = acpi_debug_trace(trace_method_name, trace_debug_level,
trace_debug_layer, 0);
if (result)
@@ -181,7 +181,7 @@
goto exit;
}
- if (!strncmp(val, "disable", strlen("disable") - 1)) {
+ if (!strncmp(val, "disable", strlen("disable"))) {
int name = 0;
result = acpi_debug_trace((char *)&name, trace_debug_level,
trace_debug_layer, 0);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index a576575..1e0a9e1 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -558,6 +558,8 @@
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
+ if (!video->cap._DOS)
+ return 0;
if (bios_flag < 0 || bios_flag > 3 || lcd_flag < 0 || lcd_flag > 1)
return -EINVAL;