ASoC: rt5640: Use the platform data for DMIC settings
The patch uses the platform data for DMIC settings.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index f0717db..6ede622 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -872,54 +872,6 @@
static const struct snd_kcontrol_new rt5640_sdi_mux =
SOC_DAPM_ENUM("SDI select", rt5640_sdi_sel_enum);
-static int rt5640_set_dmic1_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_codec *codec = w->codec;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- snd_soc_update_bits(codec, RT5640_GPIO_CTRL1,
- RT5640_GP2_PIN_MASK | RT5640_GP3_PIN_MASK,
- RT5640_GP2_PIN_DMIC1_SCL | RT5640_GP3_PIN_DMIC1_SDA);
- snd_soc_update_bits(codec, RT5640_DMIC,
- RT5640_DMIC_1L_LH_MASK | RT5640_DMIC_1R_LH_MASK |
- RT5640_DMIC_1_DP_MASK,
- RT5640_DMIC_1L_LH_FALLING | RT5640_DMIC_1R_LH_RISING |
- RT5640_DMIC_1_DP_IN1P);
- break;
-
- default:
- return 0;
- }
-
- return 0;
-}
-
-static int rt5640_set_dmic2_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
-{
- struct snd_soc_codec *codec = w->codec;
-
- switch (event) {
- case SND_SOC_DAPM_PRE_PMU:
- snd_soc_update_bits(codec, RT5640_GPIO_CTRL1,
- RT5640_GP2_PIN_MASK | RT5640_GP4_PIN_MASK,
- RT5640_GP2_PIN_DMIC1_SCL | RT5640_GP4_PIN_DMIC2_SDA);
- snd_soc_update_bits(codec, RT5640_DMIC,
- RT5640_DMIC_2L_LH_MASK | RT5640_DMIC_2R_LH_MASK |
- RT5640_DMIC_2_DP_MASK,
- RT5640_DMIC_2L_LH_FALLING | RT5640_DMIC_2R_LH_RISING |
- RT5640_DMIC_2_DP_IN1N);
- break;
-
- default:
- return 0;
- }
-
- return 0;
-}
-
static void hp_amp_power_on(struct snd_soc_codec *codec)
{
struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec);
@@ -1054,12 +1006,10 @@
SND_SOC_DAPM_SUPPLY("DMIC CLK", SND_SOC_NOPM, 0, 0,
set_dmic_clk, SND_SOC_DAPM_PRE_PMU),
- SND_SOC_DAPM_SUPPLY("DMIC1 Power", RT5640_DMIC,
- RT5640_DMIC_1_EN_SFT, 0, rt5640_set_dmic1_event,
- SND_SOC_DAPM_PRE_PMU),
- SND_SOC_DAPM_SUPPLY("DMIC2 Power", RT5640_DMIC,
- RT5640_DMIC_2_EN_SFT, 0, rt5640_set_dmic2_event,
- SND_SOC_DAPM_PRE_PMU),
+ SND_SOC_DAPM_SUPPLY("DMIC1 Power", RT5640_DMIC, RT5640_DMIC_1_EN_SFT, 0,
+ NULL, 0),
+ SND_SOC_DAPM_SUPPLY("DMIC2 Power", RT5640_DMIC, RT5640_DMIC_2_EN_SFT, 0,
+ NULL, 0),
/* Boost */
SND_SOC_DAPM_PGA("BST1", RT5640_PWR_ANLG2,
RT5640_PWR_BST1_BIT, 0, NULL, 0),
@@ -2187,6 +2137,25 @@
regmap_update_bits(rt5640->regmap, RT5640_IN3_IN4,
RT5640_IN_DF2, RT5640_IN_DF2);
+ if (rt5640->pdata.dmic_en) {
+ regmap_update_bits(rt5640->regmap, RT5640_GPIO_CTRL1,
+ RT5640_GP2_PIN_MASK, RT5640_GP2_PIN_DMIC1_SCL);
+
+ if (rt5640->pdata.dmic1_data_pin) {
+ regmap_update_bits(rt5640->regmap, RT5640_DMIC,
+ RT5640_DMIC_1_DP_MASK, RT5640_DMIC_1_DP_GPIO3);
+ regmap_update_bits(rt5640->regmap, RT5640_GPIO_CTRL1,
+ RT5640_GP3_PIN_MASK, RT5640_GP3_PIN_DMIC1_SDA);
+ }
+
+ if (rt5640->pdata.dmic2_data_pin) {
+ regmap_update_bits(rt5640->regmap, RT5640_DMIC,
+ RT5640_DMIC_2_DP_MASK, RT5640_DMIC_2_DP_GPIO4);
+ regmap_update_bits(rt5640->regmap, RT5640_GPIO_CTRL1,
+ RT5640_GP4_PIN_MASK, RT5640_GP4_PIN_DMIC2_SDA);
+ }
+ }
+
rt5640->hp_mute = 1;
ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5640,