[SCSI] 2.6 aacraid: Variable FIB size (updated patch)
New code from the Adaptec driver. Performance enhancement for newer
adapters. I hope that this isn't too big for a single patch. I believe
that other than the few small cleanups mentioned, that the changes are
all related.
- Added Variable FIB size negotiation for new adapters.
- Added support to maximize scatter gather tables and thus permit
requests larger than 64KB/each.
- Limit Scatter Gather to 34 elements for ROMB platforms.
- aac_printf is only enabled with AAC_QUIRK_34SG
- Large FIB ioctl support
- some minor cleanup
Passes sparse check.
I have tested it on x86 and ppc64 machines.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index a250a6f..4248441 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -8,12 +8,18 @@
#define MAXIMUM_NUM_CONTAINERS 32
-#define AAC_NUM_FIB (256 + 64)
-#define AAC_NUM_IO_FIB 100
+#define AAC_NUM_MGT_FIB 8
+#define AAC_NUM_IO_FIB (512 - AAC_NUM_MGT_FIB)
+#define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
#define AAC_MAX_LUN (8)
#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
+/*
+ * max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512
+ * Linux has starvation problems if we permit larger than 4MB I/O ...
+ */
+#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)8192)
/*
* These macros convert from physical channels to virtual channels
@@ -303,12 +309,9 @@
} _u;
};
-#define FIB_DATA_SIZE_IN_BYTES (512 - sizeof(struct aac_fibhdr))
-
-
struct hw_fib {
struct aac_fibhdr header;
- u8 data[FIB_DATA_SIZE_IN_BYTES]; // Command specific data
+ u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data
};
/*
@@ -370,11 +373,12 @@
#define RequestAdapterInfo 703
#define IsAdapterPaused 704
#define SendHostTime 705
-#define LastMiscCommand 706
+#define RequestSupplementAdapterInfo 706
+#define LastMiscCommand 707
-//
-// Commands that will target the failover level on the FSA adapter
-//
+/*
+ * Commands that will target the failover level on the FSA adapter
+ */
enum fib_xfer_state {
HostOwned = (1<<0),
@@ -407,6 +411,7 @@
*/
#define ADAPTER_INIT_STRUCT_REVISION 3
+#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
struct aac_init
{
@@ -424,6 +429,14 @@
__le32 HostPhysMemPages; /* number of 4k pages of host
physical memory */
__le32 HostElapsedSeconds; /* number of seconds since 1970. */
+ /*
+ * ADAPTER_INIT_STRUCT_REVISION_4 begins here
+ */
+ __le32 InitFlags; /* flags for supported features */
+#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
+ __le32 MaxIoCommands; /* max outstanding commands */
+ __le32 MaxIoSize; /* largest I/O command */
+ __le32 MaxFibSize; /* largest FIB to adapter */
};
enum aac_log_level {
@@ -447,7 +460,7 @@
{
void (*adapter_interrupt)(struct aac_dev *dev);
void (*adapter_notify)(struct aac_dev *dev, u32 event);
- int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 *status);
+ int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
};
@@ -567,6 +580,7 @@
#define Mailbox3 SaDbCSR.MAILBOX3
#define Mailbox4 SaDbCSR.MAILBOX4
#define Mailbox5 SaDbCSR.MAILBOX5
+#define Mailbox6 SaDbCSR.MAILBOX6
#define Mailbox7 SaDbCSR.MAILBOX7
#define DoorbellReg_p SaDbCSR.PRISETIRQ
@@ -812,6 +826,25 @@
__le32 OEM;
};
+struct aac_supplement_adapter_info
+{
+ u8 AdapterTypeText[17+1];
+ u8 Pad[2];
+ __le32 FlashMemoryByteSize;
+ __le32 FlashImageId;
+ __le32 MaxNumberPorts;
+ __le32 Version;
+ __le32 FeatureBits;
+ u8 SlotNumber;
+ u8 ReservedPad0[0];
+ u8 BuildDate[12];
+ __le32 CurrentNumberPorts;
+ __le32 ReservedGrowth[24];
+};
+#define AAC_FEATURE_FALCON 0x00000010
+#define AAC_SIS_VERSION_V3 3
+#define AAC_SIS_SLOT_UNKNOWN 0xFF
+
/*
* Battery platforms
*/
@@ -857,6 +890,12 @@
u16 irq_mask;
/*
+ * negotiated FIB settings
+ */
+ unsigned max_fib_size;
+ unsigned sg_tablesize;
+
+ /*
* Map for 128 fib objects (64k)
*/
dma_addr_t hw_fib_pa;
@@ -915,12 +954,14 @@
u32 aif_thread;
struct completion aif_completion;
struct aac_adapter_info adapter_info;
+ struct aac_supplement_adapter_info supplement_adapter_info;
/* These are in adapter info but they are in the io flow so
* lets break them out so we don't have to do an AND to check them
*/
u8 nondasd_support;
u8 dac_support;
u8 raid_scsi_mode;
+ u8 printf_enabled;
};
#define aac_adapter_interrupt(dev) \
@@ -929,6 +970,8 @@
#define aac_adapter_notify(dev, event) \
(dev)->a_ops.adapter_notify(dev, event)
+#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
+ (dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
@@ -1327,7 +1370,7 @@
};
/*
- * Query for Container Configuration Count
+ * Query for Container Configuration Status
*/
#define CT_GET_CONTAINER_COUNT 4
@@ -1481,6 +1524,7 @@
#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
#define FSACTL_GET_CONTAINERS 2131
+#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED)
struct aac_common
@@ -1667,3 +1711,5 @@
struct aac_driver_ident* aac_get_driver_ident(int devtype);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
+extern int numacb;
+extern int acbsize;