[MIPS] TXx9: Reorganize PCI code
Split out PCIC dependent code and SoC dependent code from board dependent
code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code.
Also fix some build problems on CONFIG_PCI=n.
As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards
and PCI66 support is available for all TX49 boards.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
new file mode 100644
index 0000000..8173faa
--- /dev/null
+++ b/arch/mips/txx9/generic/pci.c
@@ -0,0 +1,377 @@
+/*
+ * linux/arch/mips/txx9/pci.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
+ * linux/arch/mips/txx9/rbtx4938/setup.c,
+ * and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001-2005 MontaVista Software Inc.
+ * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#include <linux/interrupt.h>
+#include <asm/i8259.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+#endif
+
+static int __init
+early_read_config_word(struct pci_controller *hose,
+ int top_bus, int bus, int devfn, int offset, u16 *value)
+{
+ struct pci_dev fake_dev;
+ struct pci_bus fake_bus;
+
+ fake_dev.bus = &fake_bus;
+ fake_dev.sysdata = hose;
+ fake_dev.devfn = devfn;
+ fake_bus.number = bus;
+ fake_bus.sysdata = hose;
+ fake_bus.ops = hose->pci_ops;
+
+ if (bus != top_bus)
+ /* Fake a parent bus structure. */
+ fake_bus.parent = &fake_bus;
+ else
+ fake_bus.parent = NULL;
+
+ return pci_read_config_word(&fake_dev, offset, value);
+}
+
+int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
+ int current_bus)
+{
+ u32 pci_devfn;
+ unsigned short vid;
+ int cap66 = -1;
+ u16 stat;
+
+ /* It seems SLC90E66 needs some time after PCI reset... */
+ mdelay(80);
+
+ printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+ for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+ if (PCI_FUNC(pci_devfn))
+ continue;
+ if (early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_VENDOR_ID, &vid) !=
+ PCIBIOS_SUCCESSFUL)
+ continue;
+ if (vid == 0xffff)
+ continue;
+
+ /* check 66MHz capability */
+ if (cap66 < 0)
+ cap66 = 1;
+ if (cap66) {
+ early_read_config_word(hose, top_bus, current_bus,
+ pci_devfn, PCI_STATUS, &stat);
+ if (!(stat & PCI_STATUS_66MHZ)) {
+ printk(KERN_DEBUG
+ "PCI: %02x:%02x not 66MHz capable.\n",
+ current_bus, pci_devfn);
+ cap66 = 0;
+ break;
+ }
+ }
+ }
+ return cap66 > 0;
+}
+
+static struct resource primary_pci_mem_res[2] = {
+ { .name = "PCI MEM" },
+ { .name = "PCI MMIO" },
+};
+static struct resource primary_pci_io_res = { .name = "PCI IO" };
+struct pci_controller txx9_primary_pcic = {
+ .mem_resource = &primary_pci_mem_res[0],
+ .io_resource = &primary_pci_io_res,
+};
+
+#ifdef CONFIG_64BIT
+int txx9_pci_mem_high __initdata = 1;
+#else
+int txx9_pci_mem_high __initdata;
+#endif
+
+/*
+ * allocate pci_controller and resources.
+ * mem_base, io_base: physical addresss. 0 for auto assignment.
+ * mem_size and io_size means max size on auto assignment.
+ * pcic must be &txx9_primary_pcic or NULL.
+ */
+struct pci_controller *__init
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+ unsigned long mem_base, unsigned long mem_size,
+ unsigned long io_base, unsigned long io_size)
+{
+ struct pcic {
+ struct pci_controller c;
+ struct resource r_mem[2];
+ struct resource r_io;
+ } *new = NULL;
+ int min_size = 0x10000;
+
+ if (!pcic) {
+ new = kzalloc(sizeof(*new), GFP_KERNEL);
+ if (!new)
+ return NULL;
+ new->r_mem[0].name = "PCI mem";
+ new->r_mem[1].name = "PCI mmio";
+ new->r_io.name = "PCI io";
+ new->c.mem_resource = new->r_mem;
+ new->c.io_resource = &new->r_io;
+ pcic = &new->c;
+ } else
+ BUG_ON(pcic != &txx9_primary_pcic);
+ pcic->io_resource->flags = IORESOURCE_IO;
+
+ /*
+ * for auto assignment, first search a (big) region for PCI
+ * MEM, then search a region for PCI IO.
+ */
+ if (mem_base) {
+ pcic->mem_resource[0].start = mem_base;
+ pcic->mem_resource[0].end = mem_base + mem_size - 1;
+ if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
+ goto free_and_exit;
+ } else {
+ unsigned long min = 0, max = 0x20000000; /* low 512MB */
+ if (!mem_size) {
+ /* default size for auto assignment */
+ if (txx9_pci_mem_high)
+ mem_size = 0x20000000; /* mem:512M(max) */
+ else
+ mem_size = 0x08000000; /* mem:128M(max) */
+ }
+ if (txx9_pci_mem_high) {
+ min = 0x20000000;
+ max = 0xe0000000;
+ }
+ /* search free region for PCI MEM */
+ for (; mem_size >= min_size; mem_size /= 2) {
+ if (allocate_resource(&iomem_resource,
+ &pcic->mem_resource[0],
+ mem_size, min, max,
+ mem_size, NULL, NULL) == 0)
+ break;
+ }
+ if (mem_size < min_size)
+ goto free_and_exit;
+ }
+
+ pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+ if (io_base) {
+ pcic->mem_resource[1].start = io_base;
+ pcic->mem_resource[1].end = io_base + io_size - 1;
+ if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
+ goto release_and_exit;
+ } else {
+ if (!io_size)
+ /* default size for auto assignment */
+ io_size = 0x01000000; /* io:16M(max) */
+ /* search free region for PCI IO in low 512MB */
+ for (; io_size >= min_size; io_size /= 2) {
+ if (allocate_resource(&iomem_resource,
+ &pcic->mem_resource[1],
+ io_size, 0, 0x20000000,
+ io_size, NULL, NULL) == 0)
+ break;
+ }
+ if (io_size < min_size)
+ goto release_and_exit;
+ io_base = pcic->mem_resource[1].start;
+ }
+
+ pcic->mem_resource[0].flags = IORESOURCE_MEM;
+ if (pcic == &txx9_primary_pcic &&
+ mips_io_port_base == (unsigned long)-1) {
+ /* map ioport 0 to PCI I/O space address 0 */
+ set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
+ pcic->io_resource->start = 0;
+ pcic->io_offset = 0; /* busaddr == ioaddr */
+ pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
+ } else {
+ /* physaddr to ioaddr */
+ pcic->io_resource->start =
+ io_base - (mips_io_port_base - IO_BASE);
+ pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
+ pcic->io_map_base = mips_io_port_base;
+ }
+ pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
+
+ pcic->mem_offset = 0; /* busaddr == physaddr */
+
+ printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n",
+ (unsigned long long)pcic->mem_resource[1].start,
+ (unsigned long long)pcic->mem_resource[1].end,
+ (unsigned long long)pcic->mem_resource[0].start,
+ (unsigned long long)pcic->mem_resource[0].end);
+
+ /* register_pci_controller() will request MEM resource */
+ release_resource(&pcic->mem_resource[0]);
+ return pcic;
+ release_and_exit:
+ release_resource(&pcic->mem_resource[0]);
+ free_and_exit:
+ kfree(new);
+ printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+ return NULL;
+}
+
+static int __init
+txx9_arch_pci_init(void)
+{
+ PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */
+ return 0;
+}
+arch_initcall(txx9_arch_pci_init);
+
+/* IRQ/IDSEL mapping */
+int txx9_pci_option =
+#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
+ TXX9_PCI_OPT_PICMG |
+#endif
+ TXX9_PCI_OPT_CLK_AUTO;
+
+enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static irqreturn_t i8259_interrupt(int irq, void *dev_id)
+{
+ int isairq;
+
+ isairq = i8259_irq();
+ if (unlikely(isairq <= I8259A_IRQ_BASE))
+ return IRQ_NONE;
+ generic_handle_irq(isairq);
+ return IRQ_HANDLED;
+}
+
+static int __init
+txx9_i8259_irq_setup(int irq)
+{
+ int err;
+
+ init_i8259_irqs();
+ err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED,
+ "cascade(i8259)", (void *)(long)irq);
+ if (!err)
+ printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+ return err;
+}
+
+static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+ int irq; /* PCI/ISA Bridge interrupt */
+ u8 reg_64;
+ u32 reg_b0;
+ u8 reg_e1;
+ irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
+ if (!irq)
+ return;
+ txx9_i8259_irq_setup(irq);
+ pci_read_config_byte(dev, 0x64, ®_64);
+ pci_read_config_dword(dev, 0xb0, ®_b0);
+ pci_read_config_byte(dev, 0xe1, ®_e1);
+ /* serial irq control */
+ reg_64 = 0xd0;
+ /* serial irq pin */
+ reg_b0 |= 0x00010000;
+ /* ide irq on isa14 */
+ reg_e1 &= 0xf0;
+ reg_e1 |= 0x0d;
+ pci_write_config_byte(dev, 0x64, reg_64);
+ pci_write_config_dword(dev, 0xb0, reg_b0);
+ pci_write_config_byte(dev, 0xe1, reg_e1);
+
+ smsc_fdc37m81x_init(0x3f0);
+ smsc_fdc37m81x_config_beg();
+ smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
+ SMSC_FDC37M81X_KBD);
+ smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
+ smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
+ smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
+ 1);
+ smsc_fdc37m81x_config_end();
+}
+
+static void quirk_slc90e66_ide(struct pci_dev *dev)
+{
+ unsigned char dat;
+ int regs[2] = {0x41, 0x43};
+ int i;
+
+ /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
+ printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+ /* enable SMSC SLC90E66 IDE */
+ for (i = 0; i < ARRAY_SIZE(regs); i++) {
+ pci_read_config_byte(dev, regs[i], &dat);
+ pci_write_config_byte(dev, regs[i], dat | 0x80);
+ pci_read_config_byte(dev, regs[i], &dat);
+ printk(KERN_CONT " IDETIM%d %02x", i, dat);
+ }
+ pci_read_config_byte(dev, 0x5c, &dat);
+ /*
+ * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+ *
+ * This line of code is intended to provide the user with a work
+ * around solution to the anomalies cited in SMSC's anomaly sheet
+ * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
+ *
+ * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+ */
+ dat |= 0x01;
+ pci_write_config_byte(dev, regs[i], dat);
+ pci_read_config_byte(dev, 0x5c, &dat);
+ printk(KERN_CONT " REG5C %02x", dat);
+ printk(KERN_CONT "\n");
+}
+#endif /* CONFIG_TOSHIBA_FPCIB0 */
+
+static void final_fixup(struct pci_dev *dev)
+{
+ unsigned char bist;
+
+ /* Do build-in self test */
+ if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
+ (bist & PCI_BIST_CAPABLE)) {
+ unsigned long timeout;
+ pci_set_power_state(dev, PCI_D0);
+ printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+ pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
+ timeout = jiffies + HZ * 2; /* timeout after 2 sec */
+ do {
+ pci_read_config_byte(dev, PCI_BIST, &bist);
+ if (time_after(jiffies, timeout))
+ break;
+ } while (bist & PCI_BIST_START);
+ if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
+ printk(KERN_CONT "failed. (0x%x)\n", bist);
+ else
+ printk(KERN_CONT "OK.\n");
+ }
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+ quirk_slc90e66_bridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+ quirk_slc90e66_ide);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+ quirk_slc90e66_ide);
+#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);