| /* | 
 |  * RapidIO interconnect services | 
 |  * (RapidIO Interconnect Specification, http://www.rapidio.org) | 
 |  * | 
 |  * Copyright 2005 MontaVista Software, Inc. | 
 |  * Matt Porter <mporter@kernel.crashing.org> | 
 |  * | 
 |  * This program is free software; you can redistribute  it and/or modify it | 
 |  * under  the terms of  the GNU General  Public License as published by the | 
 |  * Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  * option) any later version. | 
 |  */ | 
 |  | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/init.h> | 
 | #include <linux/rio.h> | 
 | #include <linux/rio_drv.h> | 
 | #include <linux/rio_ids.h> | 
 | #include <linux/rio_regs.h> | 
 | #include <linux/module.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include "rio.h" | 
 |  | 
 | static LIST_HEAD(rio_mports); | 
 |  | 
 | /** | 
 |  * rio_local_get_device_id - Get the base/extended device id for a port | 
 |  * @port: RIO master port from which to get the deviceid | 
 |  * | 
 |  * Reads the base/extended device id from the local device | 
 |  * implementing the master port. Returns the 8/16-bit device | 
 |  * id. | 
 |  */ | 
 | u16 rio_local_get_device_id(struct rio_mport *port) | 
 | { | 
 | 	u32 result; | 
 |  | 
 | 	rio_local_read_config_32(port, RIO_DID_CSR, &result); | 
 |  | 
 | 	return (RIO_GET_DID(result)); | 
 | } | 
 |  | 
 | /** | 
 |  * rio_request_inb_mbox - request inbound mailbox service | 
 |  * @mport: RIO master port from which to allocate the mailbox resource | 
 |  * @dev_id: Device specific pointer to pass on event | 
 |  * @mbox: Mailbox number to claim | 
 |  * @entries: Number of entries in inbound mailbox queue | 
 |  * @minb: Callback to execute when inbound message is received | 
 |  * | 
 |  * Requests ownership of an inbound mailbox resource and binds | 
 |  * a callback function to the resource. Returns %0 on success. | 
 |  */ | 
 | int rio_request_inb_mbox(struct rio_mport *mport, | 
 | 			 void *dev_id, | 
 | 			 int mbox, | 
 | 			 int entries, | 
 | 			 void (*minb) (struct rio_mport * mport, void *dev_id, int mbox, | 
 | 				       int slot)) | 
 | { | 
 | 	int rc = 0; | 
 |  | 
 | 	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); | 
 |  | 
 | 	if (res) { | 
 | 		rio_init_mbox_res(res, mbox, mbox); | 
 |  | 
 | 		/* Make sure this mailbox isn't in use */ | 
 | 		if ((rc = | 
 | 		     request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE], | 
 | 				      res)) < 0) { | 
 | 			kfree(res); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		mport->inb_msg[mbox].res = res; | 
 |  | 
 | 		/* Hook the inbound message callback */ | 
 | 		mport->inb_msg[mbox].mcback = minb; | 
 |  | 
 | 		rc = rio_open_inb_mbox(mport, dev_id, mbox, entries); | 
 | 	} else | 
 | 		rc = -ENOMEM; | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_release_inb_mbox - release inbound mailbox message service | 
 |  * @mport: RIO master port from which to release the mailbox resource | 
 |  * @mbox: Mailbox number to release | 
 |  * | 
 |  * Releases ownership of an inbound mailbox resource. Returns 0 | 
 |  * if the request has been satisfied. | 
 |  */ | 
 | int rio_release_inb_mbox(struct rio_mport *mport, int mbox) | 
 | { | 
 | 	rio_close_inb_mbox(mport, mbox); | 
 |  | 
 | 	/* Release the mailbox resource */ | 
 | 	return release_resource(mport->inb_msg[mbox].res); | 
 | } | 
 |  | 
 | /** | 
 |  * rio_request_outb_mbox - request outbound mailbox service | 
 |  * @mport: RIO master port from which to allocate the mailbox resource | 
 |  * @dev_id: Device specific pointer to pass on event | 
 |  * @mbox: Mailbox number to claim | 
 |  * @entries: Number of entries in outbound mailbox queue | 
 |  * @moutb: Callback to execute when outbound message is sent | 
 |  * | 
 |  * Requests ownership of an outbound mailbox resource and binds | 
 |  * a callback function to the resource. Returns 0 on success. | 
 |  */ | 
 | int rio_request_outb_mbox(struct rio_mport *mport, | 
 | 			  void *dev_id, | 
 | 			  int mbox, | 
 | 			  int entries, | 
 | 			  void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot)) | 
 | { | 
 | 	int rc = 0; | 
 |  | 
 | 	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); | 
 |  | 
 | 	if (res) { | 
 | 		rio_init_mbox_res(res, mbox, mbox); | 
 |  | 
 | 		/* Make sure this outbound mailbox isn't in use */ | 
 | 		if ((rc = | 
 | 		     request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE], | 
 | 				      res)) < 0) { | 
 | 			kfree(res); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		mport->outb_msg[mbox].res = res; | 
 |  | 
 | 		/* Hook the inbound message callback */ | 
 | 		mport->outb_msg[mbox].mcback = moutb; | 
 |  | 
 | 		rc = rio_open_outb_mbox(mport, dev_id, mbox, entries); | 
 | 	} else | 
 | 		rc = -ENOMEM; | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_release_outb_mbox - release outbound mailbox message service | 
 |  * @mport: RIO master port from which to release the mailbox resource | 
 |  * @mbox: Mailbox number to release | 
 |  * | 
 |  * Releases ownership of an inbound mailbox resource. Returns 0 | 
 |  * if the request has been satisfied. | 
 |  */ | 
 | int rio_release_outb_mbox(struct rio_mport *mport, int mbox) | 
 | { | 
 | 	rio_close_outb_mbox(mport, mbox); | 
 |  | 
 | 	/* Release the mailbox resource */ | 
 | 	return release_resource(mport->outb_msg[mbox].res); | 
 | } | 
 |  | 
 | /** | 
 |  * rio_setup_inb_dbell - bind inbound doorbell callback | 
 |  * @mport: RIO master port to bind the doorbell callback | 
 |  * @dev_id: Device specific pointer to pass on event | 
 |  * @res: Doorbell message resource | 
 |  * @dinb: Callback to execute when doorbell is received | 
 |  * | 
 |  * Adds a doorbell resource/callback pair into a port's | 
 |  * doorbell event list. Returns 0 if the request has been | 
 |  * satisfied. | 
 |  */ | 
 | static int | 
 | rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res, | 
 | 		    void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst, | 
 | 				  u16 info)) | 
 | { | 
 | 	int rc = 0; | 
 | 	struct rio_dbell *dbell; | 
 |  | 
 | 	if (!(dbell = kmalloc(sizeof(struct rio_dbell), GFP_KERNEL))) { | 
 | 		rc = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	dbell->res = res; | 
 | 	dbell->dinb = dinb; | 
 | 	dbell->dev_id = dev_id; | 
 |  | 
 | 	list_add_tail(&dbell->node, &mport->dbells); | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_request_inb_dbell - request inbound doorbell message service | 
 |  * @mport: RIO master port from which to allocate the doorbell resource | 
 |  * @dev_id: Device specific pointer to pass on event | 
 |  * @start: Doorbell info range start | 
 |  * @end: Doorbell info range end | 
 |  * @dinb: Callback to execute when doorbell is received | 
 |  * | 
 |  * Requests ownership of an inbound doorbell resource and binds | 
 |  * a callback function to the resource. Returns 0 if the request | 
 |  * has been satisfied. | 
 |  */ | 
 | int rio_request_inb_dbell(struct rio_mport *mport, | 
 | 			  void *dev_id, | 
 | 			  u16 start, | 
 | 			  u16 end, | 
 | 			  void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, | 
 | 					u16 dst, u16 info)) | 
 | { | 
 | 	int rc = 0; | 
 |  | 
 | 	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); | 
 |  | 
 | 	if (res) { | 
 | 		rio_init_dbell_res(res, start, end); | 
 |  | 
 | 		/* Make sure these doorbells aren't in use */ | 
 | 		if ((rc = | 
 | 		     request_resource(&mport->riores[RIO_DOORBELL_RESOURCE], | 
 | 				      res)) < 0) { | 
 | 			kfree(res); | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		/* Hook the doorbell callback */ | 
 | 		rc = rio_setup_inb_dbell(mport, dev_id, res, dinb); | 
 | 	} else | 
 | 		rc = -ENOMEM; | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_release_inb_dbell - release inbound doorbell message service | 
 |  * @mport: RIO master port from which to release the doorbell resource | 
 |  * @start: Doorbell info range start | 
 |  * @end: Doorbell info range end | 
 |  * | 
 |  * Releases ownership of an inbound doorbell resource and removes | 
 |  * callback from the doorbell event list. Returns 0 if the request | 
 |  * has been satisfied. | 
 |  */ | 
 | int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end) | 
 | { | 
 | 	int rc = 0, found = 0; | 
 | 	struct rio_dbell *dbell; | 
 |  | 
 | 	list_for_each_entry(dbell, &mport->dbells, node) { | 
 | 		if ((dbell->res->start == start) && (dbell->res->end == end)) { | 
 | 			found = 1; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* If we can't find an exact match, fail */ | 
 | 	if (!found) { | 
 | 		rc = -EINVAL; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Delete from list */ | 
 | 	list_del(&dbell->node); | 
 |  | 
 | 	/* Release the doorbell resource */ | 
 | 	rc = release_resource(dbell->res); | 
 |  | 
 | 	/* Free the doorbell event */ | 
 | 	kfree(dbell); | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_request_outb_dbell - request outbound doorbell message range | 
 |  * @rdev: RIO device from which to allocate the doorbell resource | 
 |  * @start: Doorbell message range start | 
 |  * @end: Doorbell message range end | 
 |  * | 
 |  * Requests ownership of a doorbell message range. Returns a resource | 
 |  * if the request has been satisfied or %NULL on failure. | 
 |  */ | 
 | struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start, | 
 | 					u16 end) | 
 | { | 
 | 	struct resource *res = kmalloc(sizeof(struct resource), GFP_KERNEL); | 
 |  | 
 | 	if (res) { | 
 | 		rio_init_dbell_res(res, start, end); | 
 |  | 
 | 		/* Make sure these doorbells aren't in use */ | 
 | 		if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res) | 
 | 		    < 0) { | 
 | 			kfree(res); | 
 | 			res = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return res; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_release_outb_dbell - release outbound doorbell message range | 
 |  * @rdev: RIO device from which to release the doorbell resource | 
 |  * @res: Doorbell resource to be freed | 
 |  * | 
 |  * Releases ownership of a doorbell message range. Returns 0 if the | 
 |  * request has been satisfied. | 
 |  */ | 
 | int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res) | 
 | { | 
 | 	int rc = release_resource(res); | 
 |  | 
 | 	kfree(res); | 
 |  | 
 | 	return rc; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_mport_get_feature - query for devices' extended features | 
 |  * @port: Master port to issue transaction | 
 |  * @local: Indicate a local master port or remote device access | 
 |  * @destid: Destination ID of the device | 
 |  * @hopcount: Number of switch hops to the device | 
 |  * @ftr: Extended feature code | 
 |  * | 
 |  * Tell if a device supports a given RapidIO capability. | 
 |  * Returns the offset of the requested extended feature | 
 |  * block within the device's RIO configuration space or | 
 |  * 0 in case the device does not support it.  Possible | 
 |  * values for @ftr: | 
 |  * | 
 |  * %RIO_EFB_PAR_EP_ID		LP/LVDS EP Devices | 
 |  * | 
 |  * %RIO_EFB_PAR_EP_REC_ID	LP/LVDS EP Recovery Devices | 
 |  * | 
 |  * %RIO_EFB_PAR_EP_FREE_ID	LP/LVDS EP Free Devices | 
 |  * | 
 |  * %RIO_EFB_SER_EP_ID		LP/Serial EP Devices | 
 |  * | 
 |  * %RIO_EFB_SER_EP_REC_ID	LP/Serial EP Recovery Devices | 
 |  * | 
 |  * %RIO_EFB_SER_EP_FREE_ID	LP/Serial EP Free Devices | 
 |  */ | 
 | u32 | 
 | rio_mport_get_feature(struct rio_mport * port, int local, u16 destid, | 
 | 		      u8 hopcount, int ftr) | 
 | { | 
 | 	u32 asm_info, ext_ftr_ptr, ftr_header; | 
 |  | 
 | 	if (local) | 
 | 		rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info); | 
 | 	else | 
 | 		rio_mport_read_config_32(port, destid, hopcount, | 
 | 					 RIO_ASM_INFO_CAR, &asm_info); | 
 |  | 
 | 	ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK; | 
 |  | 
 | 	while (ext_ftr_ptr) { | 
 | 		if (local) | 
 | 			rio_local_read_config_32(port, ext_ftr_ptr, | 
 | 						 &ftr_header); | 
 | 		else | 
 | 			rio_mport_read_config_32(port, destid, hopcount, | 
 | 						 ext_ftr_ptr, &ftr_header); | 
 | 		if (RIO_GET_BLOCK_ID(ftr_header) == ftr) | 
 | 			return ext_ftr_ptr; | 
 | 		if (!(ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header))) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did | 
 |  * @vid: RIO vid to match or %RIO_ANY_ID to match all vids | 
 |  * @did: RIO did to match or %RIO_ANY_ID to match all dids | 
 |  * @asm_vid: RIO asm_vid to match or %RIO_ANY_ID to match all asm_vids | 
 |  * @asm_did: RIO asm_did to match or %RIO_ANY_ID to match all asm_dids | 
 |  * @from: Previous RIO device found in search, or %NULL for new search | 
 |  * | 
 |  * Iterates through the list of known RIO devices. If a RIO device is | 
 |  * found with a matching @vid, @did, @asm_vid, @asm_did, the reference | 
 |  * count to the device is incrememted and a pointer to its device | 
 |  * structure is returned. Otherwise, %NULL is returned. A new search | 
 |  * is initiated by passing %NULL to the @from argument. Otherwise, if | 
 |  * @from is not %NULL, searches continue from next device on the global | 
 |  * list. The reference count for @from is always decremented if it is | 
 |  * not %NULL. | 
 |  */ | 
 | struct rio_dev *rio_get_asm(u16 vid, u16 did, | 
 | 			    u16 asm_vid, u16 asm_did, struct rio_dev *from) | 
 | { | 
 | 	struct list_head *n; | 
 | 	struct rio_dev *rdev; | 
 |  | 
 | 	WARN_ON(in_interrupt()); | 
 | 	spin_lock(&rio_global_list_lock); | 
 | 	n = from ? from->global_list.next : rio_devices.next; | 
 |  | 
 | 	while (n && (n != &rio_devices)) { | 
 | 		rdev = rio_dev_g(n); | 
 | 		if ((vid == RIO_ANY_ID || rdev->vid == vid) && | 
 | 		    (did == RIO_ANY_ID || rdev->did == did) && | 
 | 		    (asm_vid == RIO_ANY_ID || rdev->asm_vid == asm_vid) && | 
 | 		    (asm_did == RIO_ANY_ID || rdev->asm_did == asm_did)) | 
 | 			goto exit; | 
 | 		n = n->next; | 
 | 	} | 
 | 	rdev = NULL; | 
 |       exit: | 
 | 	rio_dev_put(from); | 
 | 	rdev = rio_dev_get(rdev); | 
 | 	spin_unlock(&rio_global_list_lock); | 
 | 	return rdev; | 
 | } | 
 |  | 
 | /** | 
 |  * rio_get_device - Begin or continue searching for a RIO device by vid/did | 
 |  * @vid: RIO vid to match or %RIO_ANY_ID to match all vids | 
 |  * @did: RIO did to match or %RIO_ANY_ID to match all dids | 
 |  * @from: Previous RIO device found in search, or %NULL for new search | 
 |  * | 
 |  * Iterates through the list of known RIO devices. If a RIO device is | 
 |  * found with a matching @vid and @did, the reference count to the | 
 |  * device is incrememted and a pointer to its device structure is returned. | 
 |  * Otherwise, %NULL is returned. A new search is initiated by passing %NULL | 
 |  * to the @from argument. Otherwise, if @from is not %NULL, searches | 
 |  * continue from next device on the global list. The reference count for | 
 |  * @from is always decremented if it is not %NULL. | 
 |  */ | 
 | struct rio_dev *rio_get_device(u16 vid, u16 did, struct rio_dev *from) | 
 | { | 
 | 	return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from); | 
 | } | 
 |  | 
 | static void rio_fixup_device(struct rio_dev *dev) | 
 | { | 
 | } | 
 |  | 
 | static int __devinit rio_init(void) | 
 | { | 
 | 	struct rio_dev *dev = NULL; | 
 |  | 
 | 	while ((dev = rio_get_device(RIO_ANY_ID, RIO_ANY_ID, dev)) != NULL) { | 
 | 		rio_fixup_device(dev); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | device_initcall(rio_init); | 
 |  | 
 | int rio_init_mports(void) | 
 | { | 
 | 	int rc = 0; | 
 | 	struct rio_mport *port; | 
 |  | 
 | 	list_for_each_entry(port, &rio_mports, node) { | 
 | 		if (!request_mem_region(port->iores.start, | 
 | 					port->iores.end - port->iores.start, | 
 | 					port->name)) { | 
 | 			printk(KERN_ERR | 
 | 			       "RIO: Error requesting master port region %8.8lx-%8.8lx\n", | 
 | 			       port->iores.start, port->iores.end - 1); | 
 | 			rc = -ENOMEM; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (port->host_deviceid >= 0) | 
 | 			rio_enum_mport(port); | 
 | 		else | 
 | 			rio_disc_mport(port); | 
 | 	} | 
 |  | 
 |       out: | 
 | 	return rc; | 
 | } | 
 |  | 
 | void rio_register_mport(struct rio_mport *port) | 
 | { | 
 | 	list_add_tail(&port->node, &rio_mports); | 
 | } | 
 |  | 
 | EXPORT_SYMBOL_GPL(rio_local_get_device_id); | 
 | EXPORT_SYMBOL_GPL(rio_get_device); | 
 | EXPORT_SYMBOL_GPL(rio_get_asm); | 
 | EXPORT_SYMBOL_GPL(rio_request_inb_dbell); | 
 | EXPORT_SYMBOL_GPL(rio_release_inb_dbell); | 
 | EXPORT_SYMBOL_GPL(rio_request_outb_dbell); | 
 | EXPORT_SYMBOL_GPL(rio_release_outb_dbell); | 
 | EXPORT_SYMBOL_GPL(rio_request_inb_mbox); | 
 | EXPORT_SYMBOL_GPL(rio_release_inb_mbox); | 
 | EXPORT_SYMBOL_GPL(rio_request_outb_mbox); | 
 | EXPORT_SYMBOL_GPL(rio_release_outb_mbox); |