|  | /* | 
|  | * linux/arch/arm/mach-omap1/leds-osk.c | 
|  | * | 
|  | * LED driver for OSK with optional Mistral QVGA board | 
|  | */ | 
|  | #include <linux/init.h> | 
|  |  | 
|  | #include <asm/hardware.h> | 
|  | #include <asm/leds.h> | 
|  | #include <asm/system.h> | 
|  |  | 
|  | #include <asm/arch/gpio.h> | 
|  |  | 
|  | #include "leds.h" | 
|  |  | 
|  |  | 
|  | #define LED_STATE_ENABLED	(1 << 0) | 
|  | #define LED_STATE_CLAIMED	(1 << 1) | 
|  | static u8 led_state; | 
|  |  | 
|  | #define	TIMER_LED		(1 << 3)	/* Mistral board */ | 
|  | #define	IDLE_LED		(1 << 4)	/* Mistral board */ | 
|  | static u8 hw_led_state; | 
|  |  | 
|  |  | 
|  | #ifdef	CONFIG_OMAP_OSK_MISTRAL | 
|  |  | 
|  | /* For now, all system indicators require the Mistral board, since that | 
|  | * LED can be manipulated without a task context.  This LED is either red, | 
|  | * or green, but not both; it can't give the full "disco led" effect. | 
|  | */ | 
|  |  | 
|  | #define GPIO_LED_RED		3 | 
|  | #define GPIO_LED_GREEN		OMAP_MPUIO(4) | 
|  |  | 
|  | static void mistral_setled(void) | 
|  | { | 
|  | int	red = 0; | 
|  | int	green = 0; | 
|  |  | 
|  | if (hw_led_state & TIMER_LED) | 
|  | red = 1; | 
|  | else if (hw_led_state & IDLE_LED) | 
|  | green = 1; | 
|  | /* else both sides are disabled */ | 
|  |  | 
|  | omap_set_gpio_dataout(GPIO_LED_GREEN, green); | 
|  | omap_set_gpio_dataout(GPIO_LED_RED, red); | 
|  | } | 
|  |  | 
|  | #endif | 
|  |  | 
|  | void osk_leds_event(led_event_t evt) | 
|  | { | 
|  | unsigned long	flags; | 
|  | u16		leds; | 
|  |  | 
|  | local_irq_save(flags); | 
|  |  | 
|  | if (!(led_state & LED_STATE_ENABLED) && evt != led_start) | 
|  | goto done; | 
|  |  | 
|  | leds = hw_led_state; | 
|  | switch (evt) { | 
|  | case led_start: | 
|  | led_state |= LED_STATE_ENABLED; | 
|  | hw_led_state = 0; | 
|  | leds = ~0; | 
|  | break; | 
|  |  | 
|  | case led_halted: | 
|  | case led_stop: | 
|  | led_state &= ~LED_STATE_ENABLED; | 
|  | hw_led_state = 0; | 
|  | break; | 
|  |  | 
|  | case led_claim: | 
|  | led_state |= LED_STATE_CLAIMED; | 
|  | hw_led_state = 0; | 
|  | leds = ~0; | 
|  | break; | 
|  |  | 
|  | case led_release: | 
|  | led_state &= ~LED_STATE_CLAIMED; | 
|  | hw_led_state = 0; | 
|  | break; | 
|  |  | 
|  | #ifdef	CONFIG_OMAP_OSK_MISTRAL | 
|  |  | 
|  | case led_timer: | 
|  | hw_led_state ^= TIMER_LED; | 
|  | mistral_setled(); | 
|  | break; | 
|  |  | 
|  | case led_idle_start:	/* idle == off */ | 
|  | hw_led_state &= ~IDLE_LED; | 
|  | mistral_setled(); | 
|  | break; | 
|  |  | 
|  | case led_idle_end: | 
|  | hw_led_state |= IDLE_LED; | 
|  | mistral_setled(); | 
|  | break; | 
|  |  | 
|  | #endif	/* CONFIG_OMAP_OSK_MISTRAL */ | 
|  |  | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | leds ^= hw_led_state; | 
|  |  | 
|  | done: | 
|  | local_irq_restore(flags); | 
|  | } |