x86: extend e820 ealy_res support 32bit
move early_res related from e820_64.c to e820.c
make edba detection to be done in head32.c
remove smp_alloc_memory, because we have fixed trampoline address now.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++
arch/x86/kernel/e820_64.c | 196 --------------------------------
arch/x86/kernel/head32.c | 76 ++++++++++++
arch/x86/kernel/setup_32.c | 109 +++---------------
arch/x86/kernel/smpboot.c | 17 --
arch/x86/kernel/trampoline.c | 2
arch/x86/mach-voyager/voyager_smp.c | 9 -
include/asm-x86/e820.h | 6 +
include/asm-x86/e820_64.h | 9 -
include/asm-x86/smp.h | 1
arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++
arch/x86/kernel/e820_64.c | 196 --------------------------------
arch/x86/kernel/head32.c | 76 ++++++++++++
arch/x86/kernel/setup_32.c | 109 +++---------------
arch/x86/kernel/smpboot.c | 17 --
arch/x86/kernel/trampoline.c | 2
arch/x86/mach-voyager/voyager_smp.c | 9 -
include/asm-x86/e820.h | 6 +
include/asm-x86/e820_64.h | 9 -
include/asm-x86/smp.h | 1
arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++
arch/x86/kernel/e820_64.c | 196 --------------------------------
arch/x86/kernel/head32.c | 76 ++++++++++++
arch/x86/kernel/setup_32.c | 109 +++---------------
arch/x86/kernel/smpboot.c | 17 --
arch/x86/kernel/trampoline.c | 2
arch/x86/mach-voyager/voyager_smp.c | 9 -
include/asm-x86/e820.h | 6 +
include/asm-x86/e820_64.h | 9 -
include/asm-x86/smp.h | 1
10 files changed, 320 insertions(+), 319 deletions(-)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 5faeab6..fed482c 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -359,56 +359,6 @@
return max_low_pfn;
}
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
-/*
- * The BIOS places the EBDA/XBDA at the top of conventional
- * memory, and usually decreases the reported amount of
- * conventional memory (int 0x12) too. This also contains a
- * workaround for Dell systems that neglect to reserve EBDA.
- * The same workaround also avoids a problem with the AMD768MPX
- * chipset: reserve a page before VGA to prevent PCI prefetch
- * into it (errata #56). Usually the page is reserved anyways,
- * unless you have no PS/2 mouse plugged in.
- */
-static void __init reserve_ebda_region(void)
-{
- unsigned int lowmem, ebda_addr;
-
- /* To determine the position of the EBDA and the */
- /* end of conventional memory, we need to look at */
- /* the BIOS data area. In a paravirtual environment */
- /* that area is absent. We'll just have to assume */
- /* that the paravirt case can handle memory setup */
- /* correctly, without our help. */
- if (paravirt_enabled())
- return;
-
- /* end of low (conventional) memory */
- lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
- lowmem <<= 10;
-
- /* start of EBDA area */
- ebda_addr = get_bios_ebda();
-
- /* Fixup: bios puts an EBDA in the top 64K segment */
- /* of conventional memory, but does not adjust lowmem. */
- if ((lowmem - ebda_addr) <= 0x10000)
- lowmem = ebda_addr;
-
- /* Fixup: bios does not report an EBDA at all. */
- /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
- if ((ebda_addr == 0) && (lowmem >= 0x9f000))
- lowmem = 0x9f000;
-
- /* Paranoia: should never happen, but... */
- if ((lowmem == 0) || (lowmem >= 0x100000))
- lowmem = 0x9f000;
-
- /* reserve all memory between lowmem and the 1MB mark */
- reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
-}
-
#ifndef CONFIG_NEED_MULTIPLE_NODES
static void __init setup_bootmem_allocator(void);
static unsigned long __init setup_memory(void)
@@ -522,25 +472,32 @@
unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT;
unsigned long ramdisk_here;
- initrd_start = 0;
-
if (!boot_params.hdr.type_of_loader ||
!ramdisk_image || !ramdisk_size)
return; /* No initrd provided by bootloader */
+ initrd_start = 0;
+
if (ramdisk_end < ramdisk_image) {
+ free_bootmem(ramdisk_image, ramdisk_size);
printk(KERN_ERR "initrd wraps around end of memory, "
"disabling initrd\n");
return;
}
if (ramdisk_size >= end_of_lowmem/2) {
+ free_bootmem(ramdisk_image, ramdisk_size);
printk(KERN_ERR "initrd too large to handle, "
"disabling initrd\n");
return;
}
+
if (ramdisk_end <= end_of_lowmem) {
/* All in lowmem, easy case */
- reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT);
+ /*
+ * don't need to reserve again, already reserved early
+ * in i386_start_kernel, and early_res_to_bootmem
+ * convert that to reserved in bootmem
+ */
initrd_start = ramdisk_image + PAGE_OFFSET;
initrd_end = initrd_start+ramdisk_size;
return;
@@ -582,6 +539,8 @@
p = (char *)__va(ramdisk_image);
memcpy(q, p, clen);
q += clen;
+ /* need to free these low pages...*/
+ free_bootmem(ramdisk_image, clen);
ramdisk_image += clen;
ramdisk_size -= clen;
}
@@ -600,47 +559,28 @@
ramdisk_image += clen;
ramdisk_size -= clen;
}
+ /* high pages is not converted by early_res_to_bootmem */
}
#endif /* CONFIG_BLK_DEV_INITRD */
void __init setup_bootmem_allocator(void)
{
- unsigned long bootmap_size;
+ unsigned long bootmap_size, bootmap;
/*
* Initialize the boot-time allocator (with low memory only):
*/
- bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
+ bootmap_size = bootmem_bootmap_pages(max_low_pfn)<<PAGE_SHIFT;
+ bootmap = find_e820_area(min_low_pfn<<PAGE_SHIFT,
+ max_low_pfn<<PAGE_SHIFT, bootmap_size,
+ PAGE_SIZE);
+ if (bootmap == -1L)
+ panic("Cannot find bootmem map of size %ld\n", bootmap_size);
+ bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, max_low_pfn);
register_bootmem_low_pages(max_low_pfn);
+ early_res_to_bootmem(0, max_low_pfn<<PAGE_SHIFT);
+ reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
- /*
- * Reserve the bootmem bitmap itself as well. We do this in two
- * steps (first step was init_bootmem()) because this catches
- * the (very unlikely) case of us accidentally initializing the
- * bootmem allocator with an invalid RAM area.
- */
- reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text),
- BOOTMEM_DEFAULT);
-
- /*
- * reserve physical page 0 - it's a special BIOS page on many boxes,
- * enabling clean reboots, SMP operation, laptop functions.
- */
- reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
-
- /* reserve EBDA region */
- reserve_ebda_region();
-
-#ifdef CONFIG_SMP
- /*
- * But first pinch a few for the stack/trampoline stuff
- * FIXME: Don't need the extra page at 4K, but need to fix
- * trampoline before removing it. (see the GDT stuff)
- */
- reserve_bootmem(PAGE_SIZE, PAGE_SIZE, BOOTMEM_DEFAULT);
-#endif
#ifdef CONFIG_ACPI_SLEEP
/*
* Reserve low memory region for sleep support.
@@ -803,9 +743,6 @@
* not to exceed the 8Mb limit.
*/
-#ifdef CONFIG_SMP
- smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
paging_init();
/*