| /* | 
 |  * linux/arch/arm/plat-omap/mcbsp.c | 
 |  * | 
 |  * Copyright (C) 2004 Nokia Corporation | 
 |  * Author: Samuel Ortiz <samuel.ortiz@nokia.com> | 
 |  * | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * Multichannel mode not supported. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/device.h> | 
 | #include <linux/wait.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/err.h> | 
 |  | 
 | #include <asm/delay.h> | 
 | #include <asm/io.h> | 
 | #include <asm/irq.h> | 
 |  | 
 | #include <asm/arch/dma.h> | 
 | #include <asm/arch/mux.h> | 
 | #include <asm/arch/irqs.h> | 
 | #include <asm/arch/dsp_common.h> | 
 | #include <asm/arch/mcbsp.h> | 
 |  | 
 | #include <asm/hardware/clock.h> | 
 |  | 
 | #ifdef CONFIG_MCBSP_DEBUG | 
 | #define DBG(x...)	printk(x) | 
 | #else | 
 | #define DBG(x...)	do { } while (0) | 
 | #endif | 
 |  | 
 | struct omap_mcbsp { | 
 | 	u32                          io_base; | 
 | 	u8                           id; | 
 | 	u8                           free; | 
 | 	omap_mcbsp_word_length       rx_word_length; | 
 | 	omap_mcbsp_word_length       tx_word_length; | 
 |  | 
 | 	/* IRQ based TX/RX */ | 
 | 	int                          rx_irq; | 
 | 	int                          tx_irq; | 
 |  | 
 | 	/* DMA stuff */ | 
 | 	u8                           dma_rx_sync; | 
 | 	short                        dma_rx_lch; | 
 | 	u8                           dma_tx_sync; | 
 | 	short                        dma_tx_lch; | 
 |  | 
 | 	/* Completion queues */ | 
 | 	struct completion            tx_irq_completion; | 
 | 	struct completion            rx_irq_completion; | 
 | 	struct completion            tx_dma_completion; | 
 | 	struct completion            rx_dma_completion; | 
 |  | 
 | 	spinlock_t                   lock; | 
 | }; | 
 |  | 
 | static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT]; | 
 | static struct clk *mcbsp_dsp_ck = 0; | 
 | static struct clk *mcbsp_api_ck = 0; | 
 | static struct clk *mcbsp_dspxor_ck = 0; | 
 |  | 
 |  | 
 | static void omap_mcbsp_dump_reg(u8 id) | 
 | { | 
 | 	DBG("**** MCBSP%d regs ****\n", mcbsp[id].id); | 
 | 	DBG("DRR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR2)); | 
 | 	DBG("DRR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DRR1)); | 
 | 	DBG("DXR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR2)); | 
 | 	DBG("DXR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, DXR1)); | 
 | 	DBG("SPCR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR2)); | 
 | 	DBG("SPCR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SPCR1)); | 
 | 	DBG("RCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR2)); | 
 | 	DBG("RCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, RCR1)); | 
 | 	DBG("XCR2:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR2)); | 
 | 	DBG("XCR1:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, XCR1)); | 
 | 	DBG("SRGR2: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR2)); | 
 | 	DBG("SRGR1: 0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, SRGR1)); | 
 | 	DBG("PCR0:  0x%04x\n", OMAP_MCBSP_READ(mcbsp[id].io_base, PCR0)); | 
 | 	DBG("***********************\n"); | 
 | } | 
 |  | 
 |  | 
 | static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id, struct pt_regs *regs) | 
 | { | 
 | 	struct omap_mcbsp * mcbsp_tx = (struct omap_mcbsp *)(dev_id); | 
 |  | 
 | 	DBG("TX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2)); | 
 |  | 
 | 	complete(&mcbsp_tx->tx_irq_completion); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id, struct pt_regs *regs) | 
 | { | 
 | 	struct omap_mcbsp * mcbsp_rx = (struct omap_mcbsp *)(dev_id); | 
 |  | 
 | 	DBG("RX IRQ callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2)); | 
 |  | 
 | 	complete(&mcbsp_rx->rx_irq_completion); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 |  | 
 | static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) | 
 | { | 
 | 	struct omap_mcbsp * mcbsp_dma_tx = (struct omap_mcbsp *)(data); | 
 |  | 
 | 	DBG("TX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_tx->io_base, SPCR2)); | 
 |  | 
 | 	/* We can free the channels */ | 
 | 	omap_free_dma(mcbsp_dma_tx->dma_tx_lch); | 
 | 	mcbsp_dma_tx->dma_tx_lch = -1; | 
 |  | 
 | 	complete(&mcbsp_dma_tx->tx_dma_completion); | 
 | } | 
 |  | 
 | static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) | 
 | { | 
 | 	struct omap_mcbsp * mcbsp_dma_rx = (struct omap_mcbsp *)(data); | 
 |  | 
 | 	DBG("RX DMA callback : 0x%x\n", OMAP_MCBSP_READ(mcbsp_dma_rx->io_base, SPCR2)); | 
 |  | 
 | 	/* We can free the channels */ | 
 | 	omap_free_dma(mcbsp_dma_rx->dma_rx_lch); | 
 | 	mcbsp_dma_rx->dma_rx_lch = -1; | 
 |  | 
 | 	complete(&mcbsp_dma_rx->rx_dma_completion); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * omap_mcbsp_config simply write a config to the | 
 |  * appropriate McBSP. | 
 |  * You either call this function or set the McBSP registers | 
 |  * by yourself before calling omap_mcbsp_start(). | 
 |  */ | 
 |  | 
 | void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config) | 
 | { | 
 | 	u32 io_base = mcbsp[id].io_base; | 
 |  | 
 | 	DBG("OMAP-McBSP: McBSP%d  io_base: 0x%8x\n", id+1, io_base); | 
 |  | 
 | 	/* We write the given config */ | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, config->spcr2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR1, config->spcr1); | 
 | 	OMAP_MCBSP_WRITE(io_base, RCR2, config->rcr2); | 
 | 	OMAP_MCBSP_WRITE(io_base, RCR1, config->rcr1); | 
 | 	OMAP_MCBSP_WRITE(io_base, XCR2, config->xcr2); | 
 | 	OMAP_MCBSP_WRITE(io_base, XCR1, config->xcr1); | 
 | 	OMAP_MCBSP_WRITE(io_base, SRGR2, config->srgr2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SRGR1, config->srgr1); | 
 | 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); | 
 | 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); | 
 | 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); | 
 | } | 
 |  | 
 |  | 
 |  | 
 | static int omap_mcbsp_check(unsigned int id) | 
 | { | 
 | 	if (cpu_is_omap730()) { | 
 | 		if (id > OMAP_MAX_MCBSP_COUNT - 1) { | 
 | 		       printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); | 
 | 		       return -1; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (cpu_is_omap1510() || cpu_is_omap16xx()) { | 
 | 		if (id > OMAP_MAX_MCBSP_COUNT) { | 
 | 			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1); | 
 | 			return -1; | 
 | 		} | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | static void omap_mcbsp_dsp_request(void) | 
 | { | 
 | 	if (cpu_is_omap1510() || cpu_is_omap16xx()) { | 
 | 		clk_use(mcbsp_dsp_ck); | 
 | 		clk_use(mcbsp_api_ck); | 
 |  | 
 | 		/* enable 12MHz clock to mcbsp 1 & 3 */ | 
 | 		clk_use(mcbsp_dspxor_ck); | 
 |  | 
 | 		/* | 
 | 		 * DSP external peripheral reset | 
 | 		 * FIXME: This should be moved to dsp code | 
 | 		 */ | 
 | 		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1, | 
 | 			     DSP_RSTCT2); | 
 | 	} | 
 | } | 
 |  | 
 | static void omap_mcbsp_dsp_free(void) | 
 | { | 
 | 	if (cpu_is_omap1510() || cpu_is_omap16xx()) { | 
 | 		clk_unuse(mcbsp_dspxor_ck); | 
 | 		clk_unuse(mcbsp_dsp_ck); | 
 | 		clk_unuse(mcbsp_api_ck); | 
 | 	} | 
 | } | 
 |  | 
 | int omap_mcbsp_request(unsigned int id) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* | 
 | 	 * On 1510, 1610 and 1710, McBSP1 and McBSP3 | 
 | 	 * are DSP public peripherals. | 
 | 	 */ | 
 | 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) | 
 | 		omap_mcbsp_dsp_request(); | 
 |  | 
 | 	spin_lock(&mcbsp[id].lock); | 
 | 	if (!mcbsp[id].free) { | 
 | 		printk (KERN_ERR "OMAP-McBSP: McBSP%d is currently in use\n", id + 1); | 
 | 		spin_unlock(&mcbsp[id].lock); | 
 | 		return -1; | 
 | 	} | 
 |  | 
 | 	mcbsp[id].free = 0; | 
 | 	spin_unlock(&mcbsp[id].lock); | 
 |  | 
 | 	/* We need to get IRQs here */ | 
 | 	err = request_irq(mcbsp[id].tx_irq, omap_mcbsp_tx_irq_handler, 0, | 
 | 			  "McBSP", | 
 | 			  (void *) (&mcbsp[id])); | 
 | 	if (err != 0) { | 
 | 		printk(KERN_ERR "OMAP-McBSP: Unable to request TX IRQ %d for McBSP%d\n", | 
 | 		       mcbsp[id].tx_irq, mcbsp[id].id); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	init_completion(&(mcbsp[id].tx_irq_completion)); | 
 |  | 
 |  | 
 | 	err = request_irq(mcbsp[id].rx_irq, omap_mcbsp_rx_irq_handler, 0, | 
 | 			  "McBSP", | 
 | 			  (void *) (&mcbsp[id])); | 
 | 	if (err != 0) { | 
 | 		printk(KERN_ERR "OMAP-McBSP: Unable to request RX IRQ %d for McBSP%d\n", | 
 | 		       mcbsp[id].rx_irq, mcbsp[id].id); | 
 | 		free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	init_completion(&(mcbsp[id].rx_irq_completion)); | 
 | 	return 0; | 
 |  | 
 | } | 
 |  | 
 | void omap_mcbsp_free(unsigned int id) | 
 | { | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return; | 
 |  | 
 | 	if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) | 
 | 		omap_mcbsp_dsp_free(); | 
 |  | 
 | 	spin_lock(&mcbsp[id].lock); | 
 | 	if (mcbsp[id].free) { | 
 | 		printk (KERN_ERR "OMAP-McBSP: McBSP%d was not reserved\n", id + 1); | 
 | 		spin_unlock(&mcbsp[id].lock); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	mcbsp[id].free = 1; | 
 | 	spin_unlock(&mcbsp[id].lock); | 
 |  | 
 | 	/* Free IRQs */ | 
 | 	free_irq(mcbsp[id].rx_irq, (void *) (&mcbsp[id])); | 
 | 	free_irq(mcbsp[id].tx_irq, (void *) (&mcbsp[id])); | 
 | } | 
 |  | 
 | /* | 
 |  * Here we start the McBSP, by enabling the sample | 
 |  * generator, both transmitter and receivers, | 
 |  * and the frame sync. | 
 |  */ | 
 | void omap_mcbsp_start(unsigned int id) | 
 | { | 
 | 	u32 io_base; | 
 | 	u16 w; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return; | 
 |  | 
 | 	io_base = mcbsp[id].io_base; | 
 |  | 
 | 	mcbsp[id].rx_word_length = ((OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7); | 
 | 	mcbsp[id].tx_word_length = ((OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7); | 
 |  | 
 | 	/* Start the sample generator */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6)); | 
 |  | 
 | 	/* Enable transmitter and receiver */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1); | 
 |  | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR1); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1); | 
 |  | 
 | 	udelay(100); | 
 |  | 
 | 	/* Start frame sync */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7)); | 
 |  | 
 | 	/* Dump McBSP Regs */ | 
 | 	omap_mcbsp_dump_reg(id); | 
 |  | 
 | } | 
 |  | 
 | void omap_mcbsp_stop(unsigned int id) | 
 | { | 
 | 	u32 io_base; | 
 | 	u16 w; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return; | 
 |  | 
 | 	io_base = mcbsp[id].io_base; | 
 |  | 
 |         /* Reset transmitter */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1)); | 
 |  | 
 | 	/* Reset receiver */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR1); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1)); | 
 |  | 
 | 	/* Reset the sample rate generator */ | 
 | 	w = OMAP_MCBSP_READ(io_base, SPCR2); | 
 | 	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6)); | 
 | } | 
 |  | 
 |  | 
 | /* polled mcbsp i/o operations */ | 
 | int omap_mcbsp_pollwrite(unsigned int id, u16 buf) | 
 | { | 
 | 	u32 base = mcbsp[id].io_base; | 
 | 	writew(buf, base + OMAP_MCBSP_REG_DXR1); | 
 | 	/* if frame sync error - clear the error */ | 
 | 	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) { | 
 | 		/* clear error */ | 
 | 		writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR), | 
 | 		       base + OMAP_MCBSP_REG_SPCR2); | 
 | 		/* resend */ | 
 | 		return -1; | 
 | 	} else { | 
 | 		/* wait for transmit confirmation */ | 
 | 		int attemps = 0; | 
 | 		while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) { | 
 | 			if (attemps++ > 1000) { | 
 | 				writew(readw(base + OMAP_MCBSP_REG_SPCR2) & | 
 | 				       (~XRST), | 
 | 				       base + OMAP_MCBSP_REG_SPCR2); | 
 | 				udelay(10); | 
 | 				writew(readw(base + OMAP_MCBSP_REG_SPCR2) | | 
 | 				       (XRST), | 
 | 				       base + OMAP_MCBSP_REG_SPCR2); | 
 | 				udelay(10); | 
 | 				printk(KERN_ERR | 
 | 				       " Could not write to McBSP Register\n"); | 
 | 				return -2; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | int omap_mcbsp_pollread(unsigned int id, u16 * buf) | 
 | { | 
 | 	u32 base = mcbsp[id].io_base; | 
 | 	/* if frame sync error - clear the error */ | 
 | 	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) { | 
 | 		/* clear error */ | 
 | 		writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR), | 
 | 		       base + OMAP_MCBSP_REG_SPCR1); | 
 | 		/* resend */ | 
 | 		return -1; | 
 | 	} else { | 
 | 		/* wait for recieve confirmation */ | 
 | 		int attemps = 0; | 
 | 		while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) { | 
 | 			if (attemps++ > 1000) { | 
 | 				writew(readw(base + OMAP_MCBSP_REG_SPCR1) & | 
 | 				       (~RRST), | 
 | 				       base + OMAP_MCBSP_REG_SPCR1); | 
 | 				udelay(10); | 
 | 				writew(readw(base + OMAP_MCBSP_REG_SPCR1) | | 
 | 				       (RRST), | 
 | 				       base + OMAP_MCBSP_REG_SPCR1); | 
 | 				udelay(10); | 
 | 				printk(KERN_ERR | 
 | 				       " Could not read from McBSP Register\n"); | 
 | 				return -2; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | 	*buf = readw(base + OMAP_MCBSP_REG_DRR1); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * IRQ based word transmission. | 
 |  */ | 
 | void omap_mcbsp_xmit_word(unsigned int id, u32 word) | 
 | { | 
 | 	u32 io_base; | 
 | 	omap_mcbsp_word_length word_length = mcbsp[id].tx_word_length; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return; | 
 |  | 
 | 	io_base = mcbsp[id].io_base; | 
 |  | 
 | 	wait_for_completion(&(mcbsp[id].tx_irq_completion)); | 
 |  | 
 | 	if (word_length > OMAP_MCBSP_WORD_16) | 
 | 		OMAP_MCBSP_WRITE(io_base, DXR2, word >> 16); | 
 | 	OMAP_MCBSP_WRITE(io_base, DXR1, word & 0xffff); | 
 | } | 
 |  | 
 | u32 omap_mcbsp_recv_word(unsigned int id) | 
 | { | 
 | 	u32 io_base; | 
 | 	u16 word_lsb, word_msb = 0; | 
 | 	omap_mcbsp_word_length word_length = mcbsp[id].rx_word_length; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	io_base = mcbsp[id].io_base; | 
 |  | 
 | 	wait_for_completion(&(mcbsp[id].rx_irq_completion)); | 
 |  | 
 | 	if (word_length > OMAP_MCBSP_WORD_16) | 
 | 		word_msb = OMAP_MCBSP_READ(io_base, DRR2); | 
 | 	word_lsb = OMAP_MCBSP_READ(io_base, DRR1); | 
 |  | 
 | 	return (word_lsb | (word_msb << 16)); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Simple DMA based buffer rx/tx routines. | 
 |  * Nothing fancy, just a single buffer tx/rx through DMA. | 
 |  * The DMA resources are released once the transfer is done. | 
 |  * For anything fancier, you should use your own customized DMA | 
 |  * routines and callbacks. | 
 |  */ | 
 | int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) | 
 | { | 
 | 	int dma_tx_ch; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (omap_request_dma(mcbsp[id].dma_tx_sync, "McBSP TX", omap_mcbsp_tx_dma_callback, | 
 | 			     &mcbsp[id], | 
 | 			     &dma_tx_ch)) { | 
 | 		printk("OMAP-McBSP: Unable to request DMA channel for McBSP%d TX. Trying IRQ based TX\n", id+1); | 
 | 		return -EAGAIN; | 
 | 	} | 
 | 	mcbsp[id].dma_tx_lch = dma_tx_ch; | 
 |  | 
 | 	DBG("TX DMA on channel %d\n", dma_tx_ch); | 
 |  | 
 | 	init_completion(&(mcbsp[id].tx_dma_completion)); | 
 |  | 
 | 	omap_set_dma_transfer_params(mcbsp[id].dma_tx_lch, | 
 | 				     OMAP_DMA_DATA_TYPE_S16, | 
 | 				     length >> 1, 1, | 
 | 				     OMAP_DMA_SYNC_ELEMENT); | 
 |  | 
 | 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch, | 
 | 				 OMAP_DMA_PORT_TIPB, | 
 | 				 OMAP_DMA_AMODE_CONSTANT, | 
 | 				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1); | 
 |  | 
 | 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch, | 
 | 				OMAP_DMA_PORT_EMIFF, | 
 | 				OMAP_DMA_AMODE_POST_INC, | 
 | 				buffer); | 
 |  | 
 | 	omap_start_dma(mcbsp[id].dma_tx_lch); | 
 | 	wait_for_completion(&(mcbsp[id].tx_dma_completion)); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length) | 
 | { | 
 | 	int dma_rx_ch; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (omap_request_dma(mcbsp[id].dma_rx_sync, "McBSP RX", omap_mcbsp_rx_dma_callback, | 
 | 			     &mcbsp[id], | 
 | 			     &dma_rx_ch)) { | 
 | 		printk("Unable to request DMA channel for McBSP%d RX. Trying IRQ based RX\n", id+1); | 
 | 		return -EAGAIN; | 
 | 	} | 
 | 	mcbsp[id].dma_rx_lch = dma_rx_ch; | 
 |  | 
 | 	DBG("RX DMA on channel %d\n", dma_rx_ch); | 
 |  | 
 | 	init_completion(&(mcbsp[id].rx_dma_completion)); | 
 |  | 
 | 	omap_set_dma_transfer_params(mcbsp[id].dma_rx_lch, | 
 | 				     OMAP_DMA_DATA_TYPE_S16, | 
 | 				     length >> 1, 1, | 
 | 				     OMAP_DMA_SYNC_ELEMENT); | 
 |  | 
 | 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch, | 
 | 				OMAP_DMA_PORT_TIPB, | 
 | 				OMAP_DMA_AMODE_CONSTANT, | 
 | 				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1); | 
 |  | 
 | 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch, | 
 | 				 OMAP_DMA_PORT_EMIFF, | 
 | 				 OMAP_DMA_AMODE_POST_INC, | 
 | 				 buffer); | 
 |  | 
 | 	omap_start_dma(mcbsp[id].dma_rx_lch); | 
 | 	wait_for_completion(&(mcbsp[id].rx_dma_completion)); | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * SPI wrapper. | 
 |  * Since SPI setup is much simpler than the generic McBSP one, | 
 |  * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. | 
 |  * Once this is done, you can call omap_mcbsp_start(). | 
 |  */ | 
 | void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg) | 
 | { | 
 | 	struct omap_mcbsp_reg_cfg mcbsp_cfg; | 
 |  | 
 | 	if (omap_mcbsp_check(id) < 0) | 
 | 		return; | 
 |  | 
 | 	memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); | 
 |  | 
 | 	/* SPI has only one frame */ | 
 | 	mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); | 
 | 	mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); | 
 |  | 
 |         /* Clock stop mode */ | 
 | 	if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) | 
 | 		mcbsp_cfg.spcr1 |= (1 << 12); | 
 | 	else | 
 | 		mcbsp_cfg.spcr1 |= (3 << 11); | 
 |  | 
 | 	/* Set clock parities */ | 
 | 	if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) | 
 | 		mcbsp_cfg.pcr0 |= CLKRP; | 
 | 	else | 
 | 		mcbsp_cfg.pcr0 &= ~CLKRP; | 
 |  | 
 | 	if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) | 
 | 		mcbsp_cfg.pcr0 &= ~CLKXP; | 
 | 	else | 
 | 		mcbsp_cfg.pcr0 |= CLKXP; | 
 |  | 
 | 	/* Set SCLKME to 0 and CLKSM to 1 */ | 
 | 	mcbsp_cfg.pcr0 &= ~SCLKME; | 
 | 	mcbsp_cfg.srgr2 |= CLKSM; | 
 |  | 
 | 	/* Set FSXP */ | 
 | 	if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) | 
 | 		mcbsp_cfg.pcr0 &= ~FSXP; | 
 | 	else | 
 | 		mcbsp_cfg.pcr0 |= FSXP; | 
 |  | 
 | 	if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { | 
 | 		mcbsp_cfg.pcr0 |= CLKXM; | 
 | 		mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div -1); | 
 | 		mcbsp_cfg.pcr0 |= FSXM; | 
 | 		mcbsp_cfg.srgr2 &= ~FSGM; | 
 | 		mcbsp_cfg.xcr2 |= XDATDLY(1); | 
 | 		mcbsp_cfg.rcr2 |= RDATDLY(1); | 
 | 	} | 
 | 	else { | 
 | 		mcbsp_cfg.pcr0 &= ~CLKXM; | 
 | 		mcbsp_cfg.srgr1 |= CLKGDV(1); | 
 | 		mcbsp_cfg.pcr0 &= ~FSXM; | 
 | 		mcbsp_cfg.xcr2 &= ~XDATDLY(3); | 
 | 		mcbsp_cfg.rcr2 &= ~RDATDLY(3); | 
 | 	} | 
 |  | 
 | 	mcbsp_cfg.xcr2 &= ~XPHASE; | 
 | 	mcbsp_cfg.rcr2 &= ~RPHASE; | 
 |  | 
 | 	omap_mcbsp_config(id, &mcbsp_cfg); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. | 
 |  * 730 has only 2 McBSP, and both of them are MPU peripherals. | 
 |  */ | 
 | struct omap_mcbsp_info { | 
 | 	u32 virt_base; | 
 | 	u8 dma_rx_sync, dma_tx_sync; | 
 | 	u16 rx_irq, tx_irq; | 
 | }; | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP730 | 
 | static const struct omap_mcbsp_info mcbsp_730[] = { | 
 | 	[0] = { .virt_base = io_p2v(OMAP730_MCBSP1_BASE), | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP1_TX, | 
 | 		.rx_irq = INT_730_McBSP1RX, | 
 | 		.tx_irq = INT_730_McBSP1TX }, | 
 | 	[1] = { .virt_base = io_p2v(OMAP730_MCBSP2_BASE), | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP3_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP3_TX, | 
 | 		.rx_irq = INT_730_McBSP2RX, | 
 | 		.tx_irq = INT_730_McBSP2TX }, | 
 | }; | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP1510 | 
 | static const struct omap_mcbsp_info mcbsp_1510[] = { | 
 | 	[0] = { .virt_base = OMAP1510_MCBSP1_BASE, | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP1_TX, | 
 | 		.rx_irq = INT_McBSP1RX, | 
 | 		.tx_irq = INT_McBSP1TX }, | 
 | 	[1] = { .virt_base = io_p2v(OMAP1510_MCBSP2_BASE), | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP2_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP2_TX, | 
 | 		.rx_irq = INT_1510_SPI_RX, | 
 | 		.tx_irq = INT_1510_SPI_TX }, | 
 | 	[2] = { .virt_base = OMAP1510_MCBSP3_BASE, | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP3_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP3_TX, | 
 | 		.rx_irq = INT_McBSP3RX, | 
 | 		.tx_irq = INT_McBSP3TX }, | 
 | }; | 
 | #endif | 
 |  | 
 | #if defined(CONFIG_ARCH_OMAP16XX) | 
 | static const struct omap_mcbsp_info mcbsp_1610[] = { | 
 | 	[0] = { .virt_base = OMAP1610_MCBSP1_BASE, | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP1_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP1_TX, | 
 | 		.rx_irq = INT_McBSP1RX, | 
 | 		.tx_irq = INT_McBSP1TX }, | 
 | 	[1] = { .virt_base = io_p2v(OMAP1610_MCBSP2_BASE), | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP2_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP2_TX, | 
 | 		.rx_irq = INT_1610_McBSP2_RX, | 
 | 		.tx_irq = INT_1610_McBSP2_TX }, | 
 | 	[2] = { .virt_base = OMAP1610_MCBSP3_BASE, | 
 | 		.dma_rx_sync = OMAP_DMA_MCBSP3_RX, | 
 | 		.dma_tx_sync = OMAP_DMA_MCBSP3_TX, | 
 | 		.rx_irq = INT_McBSP3RX, | 
 | 		.tx_irq = INT_McBSP3TX }, | 
 | }; | 
 | #endif | 
 |  | 
 | static int __init omap_mcbsp_init(void) | 
 | { | 
 | 	int mcbsp_count = 0, i; | 
 | 	static const struct omap_mcbsp_info *mcbsp_info; | 
 |  | 
 | 	printk("Initializing OMAP McBSP system\n"); | 
 |  | 
 | 	mcbsp_dsp_ck = clk_get(0, "dsp_ck"); | 
 | 	if (IS_ERR(mcbsp_dsp_ck)) { | 
 | 		printk(KERN_ERR "mcbsp: could not acquire dsp_ck handle.\n"); | 
 | 		return PTR_ERR(mcbsp_dsp_ck); | 
 | 	} | 
 | 	mcbsp_api_ck = clk_get(0, "api_ck"); | 
 | 	if (IS_ERR(mcbsp_api_ck)) { | 
 | 		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n"); | 
 | 		return PTR_ERR(mcbsp_api_ck); | 
 | 	} | 
 | 	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck"); | 
 | 	if (IS_ERR(mcbsp_dspxor_ck)) { | 
 | 		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n"); | 
 | 		return PTR_ERR(mcbsp_dspxor_ck); | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_ARCH_OMAP730 | 
 | 	if (cpu_is_omap730()) { | 
 | 		mcbsp_info = mcbsp_730; | 
 | 		mcbsp_count = ARRAY_SIZE(mcbsp_730); | 
 | 	} | 
 | #endif | 
 | #ifdef CONFIG_ARCH_OMAP1510 | 
 | 	if (cpu_is_omap1510()) { | 
 | 		mcbsp_info = mcbsp_1510; | 
 | 		mcbsp_count = ARRAY_SIZE(mcbsp_1510); | 
 | 	} | 
 | #endif | 
 | #if defined(CONFIG_ARCH_OMAP16XX) | 
 | 	if (cpu_is_omap16xx()) { | 
 | 		mcbsp_info = mcbsp_1610; | 
 | 		mcbsp_count = ARRAY_SIZE(mcbsp_1610); | 
 | 	} | 
 | #endif | 
 | 	for (i = 0; i < OMAP_MAX_MCBSP_COUNT ; i++) { | 
 | 		if (i >= mcbsp_count) { | 
 | 			mcbsp[i].io_base = 0; | 
 | 			mcbsp[i].free = 0; | 
 |                         continue; | 
 | 		} | 
 | 		mcbsp[i].id = i + 1; | 
 | 		mcbsp[i].free = 1; | 
 | 		mcbsp[i].dma_tx_lch = -1; | 
 | 		mcbsp[i].dma_rx_lch = -1; | 
 |  | 
 | 		mcbsp[i].io_base = mcbsp_info[i].virt_base; | 
 | 		mcbsp[i].tx_irq = mcbsp_info[i].tx_irq; | 
 | 		mcbsp[i].rx_irq = mcbsp_info[i].rx_irq; | 
 | 		mcbsp[i].dma_rx_sync = mcbsp_info[i].dma_rx_sync; | 
 | 		mcbsp[i].dma_tx_sync = mcbsp_info[i].dma_tx_sync; | 
 | 		spin_lock_init(&mcbsp[i].lock); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | arch_initcall(omap_mcbsp_init); | 
 |  | 
 | EXPORT_SYMBOL(omap_mcbsp_config); | 
 | EXPORT_SYMBOL(omap_mcbsp_request); | 
 | EXPORT_SYMBOL(omap_mcbsp_free); | 
 | EXPORT_SYMBOL(omap_mcbsp_start); | 
 | EXPORT_SYMBOL(omap_mcbsp_stop); | 
 | EXPORT_SYMBOL(omap_mcbsp_xmit_word); | 
 | EXPORT_SYMBOL(omap_mcbsp_recv_word); | 
 | EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); | 
 | EXPORT_SYMBOL(omap_mcbsp_recv_buffer); | 
 | EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); |