| /******************************************************************************* | 
 |  * | 
 |  * Module Name: rsmem24 - Memory resource descriptors | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | /* | 
 |  * Copyright (C) 2000 - 2005, R. Byron Moore | 
 |  * All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, this list of conditions, and the following disclaimer, | 
 |  *    without modification. | 
 |  * 2. Redistributions in binary form must reproduce at minimum a disclaimer | 
 |  *    substantially similar to the "NO WARRANTY" disclaimer below | 
 |  *    ("Disclaimer") and any redistribution must be conditioned upon | 
 |  *    including a substantially similar Disclaimer requirement for further | 
 |  *    binary redistribution. | 
 |  * 3. Neither the names of the above-listed copyright holders nor the names | 
 |  *    of any contributors may be used to endorse or promote products derived | 
 |  *    from this software without specific prior written permission. | 
 |  * | 
 |  * Alternatively, this software may be distributed under the terms of the | 
 |  * GNU General Public License ("GPL") version 2 as published by the Free | 
 |  * Software Foundation. | 
 |  * | 
 |  * NO WARRANTY | 
 |  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | 
 |  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | 
 |  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR | 
 |  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | 
 |  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | 
 |  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | 
 |  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING | 
 |  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | 
 |  * POSSIBILITY OF SUCH DAMAGES. | 
 |  */ | 
 |  | 
 | #include <acpi/acpi.h> | 
 | #include <acpi/acresrc.h> | 
 |  | 
 | #define _COMPONENT          ACPI_RESOURCES | 
 | ACPI_MODULE_NAME("rsmemory") | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_memory24_resource | 
 |  * | 
 |  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte | 
 |  *                                        stream | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        consumed the byte_stream_buffer is | 
 |  *                                        returned | 
 |  *              output_buffer           - Pointer to the return data buffer | 
 |  *              structure_size          - Pointer to where the number of bytes | 
 |  *                                        in the return data struct is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the resource byte stream and fill out the appropriate | 
 |  *              structure pointed to by the output_buffer. Return the | 
 |  *              number of bytes consumed from the byte stream. | 
 |  * | 
 |  ******************************************************************************/ | 
 | acpi_status | 
 | acpi_rs_memory24_resource(u8 * byte_stream_buffer, | 
 | 			  acpi_size * bytes_consumed, | 
 | 			  u8 ** output_buffer, acpi_size * structure_size) | 
 | { | 
 | 	u8 *buffer = byte_stream_buffer; | 
 | 	struct acpi_resource *output_struct = (void *)*output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 | 	acpi_size struct_size = | 
 | 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem24); | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_memory24_resource"); | 
 |  | 
 | 	/* Point past the Descriptor to get the number of bytes consumed */ | 
 |  | 
 | 	buffer += 1; | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	buffer += 2; | 
 | 	*bytes_consumed = (acpi_size) temp16 + 3; | 
 | 	output_struct->id = ACPI_RSTYPE_MEM24; | 
 |  | 
 | 	/* Check Byte 3 the Read/Write bit */ | 
 |  | 
 | 	temp8 = *buffer; | 
 | 	buffer += 1; | 
 | 	output_struct->data.memory24.read_write_attribute = temp8 & 0x01; | 
 |  | 
 | 	/* Get min_base_address (Bytes 4-5) */ | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	buffer += 2; | 
 | 	output_struct->data.memory24.min_base_address = temp16; | 
 |  | 
 | 	/* Get max_base_address (Bytes 6-7) */ | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	buffer += 2; | 
 | 	output_struct->data.memory24.max_base_address = temp16; | 
 |  | 
 | 	/* Get Alignment (Bytes 8-9) */ | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	buffer += 2; | 
 | 	output_struct->data.memory24.alignment = temp16; | 
 |  | 
 | 	/* Get range_length (Bytes 10-11) */ | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	output_struct->data.memory24.range_length = temp16; | 
 |  | 
 | 	/* Set the Length parameter */ | 
 |  | 
 | 	output_struct->length = (u32) struct_size; | 
 |  | 
 | 	/* Return the final size of the structure */ | 
 |  | 
 | 	*structure_size = struct_size; | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_memory24_stream | 
 |  * | 
 |  * PARAMETERS:  linked_list             - Pointer to the resource linked list | 
 |  *              output_buffer           - Pointer to the user's return buffer | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        used in the output_buffer is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the linked list resource structure and fills in the | 
 |  *              the appropriate bytes in a byte stream | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_rs_memory24_stream(struct acpi_resource *linked_list, | 
 | 			u8 ** output_buffer, acpi_size * bytes_consumed) | 
 | { | 
 | 	u8 *buffer = *output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_memory24_stream"); | 
 |  | 
 | 	/* The descriptor field is static */ | 
 |  | 
 | 	*buffer = 0x81; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* The length field is static */ | 
 |  | 
 | 	temp16 = 0x09; | 
 | 	ACPI_MOVE_16_TO_16(buffer, &temp16); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the Information Byte */ | 
 |  | 
 | 	temp8 = (u8) (linked_list->data.memory24.read_write_attribute & 0x01); | 
 | 	*buffer = temp8; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* Set the Range minimum base address */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_16(buffer, | 
 | 			   &linked_list->data.memory24.min_base_address); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the Range maximum base address */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_16(buffer, | 
 | 			   &linked_list->data.memory24.max_base_address); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the base alignment */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.alignment); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the range length */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_16(buffer, &linked_list->data.memory24.range_length); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Return the number of bytes consumed in this operation */ | 
 |  | 
 | 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_memory32_range_resource | 
 |  * | 
 |  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte | 
 |  *                                        stream | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        consumed the byte_stream_buffer is | 
 |  *                                        returned | 
 |  *              output_buffer           - Pointer to the return data buffer | 
 |  *              structure_size          - Pointer to where the number of bytes | 
 |  *                                        in the return data struct is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the resource byte stream and fill out the appropriate | 
 |  *              structure pointed to by the output_buffer. Return the | 
 |  *              number of bytes consumed from the byte stream. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_rs_memory32_range_resource(u8 * byte_stream_buffer, | 
 | 				acpi_size * bytes_consumed, | 
 | 				u8 ** output_buffer, acpi_size * structure_size) | 
 | { | 
 | 	u8 *buffer = byte_stream_buffer; | 
 | 	struct acpi_resource *output_struct = (void *)*output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 | 	acpi_size struct_size = | 
 | 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_mem32); | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_memory32_range_resource"); | 
 |  | 
 | 	/* Point past the Descriptor to get the number of bytes consumed */ | 
 |  | 
 | 	buffer += 1; | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 | 	buffer += 2; | 
 | 	*bytes_consumed = (acpi_size) temp16 + 3; | 
 |  | 
 | 	output_struct->id = ACPI_RSTYPE_MEM32; | 
 |  | 
 | 	/* | 
 | 	 *  Point to the place in the output buffer where the data portion will | 
 | 	 *  begin. | 
 | 	 *  1. Set the RESOURCE_DATA * Data to point to its own address, then | 
 | 	 *  2. Set the pointer to the next address. | 
 | 	 * | 
 | 	 *  NOTE: output_struct->Data is cast to u8, otherwise, this addition adds | 
 | 	 *  4 * sizeof(RESOURCE_DATA) instead of 4 * sizeof(u8) | 
 | 	 */ | 
 |  | 
 | 	/* Check Byte 3 the Read/Write bit */ | 
 |  | 
 | 	temp8 = *buffer; | 
 | 	buffer += 1; | 
 |  | 
 | 	output_struct->data.memory32.read_write_attribute = temp8 & 0x01; | 
 |  | 
 | 	/* Get min_base_address (Bytes 4-7) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.min_base_address, | 
 | 			   buffer); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Get max_base_address (Bytes 8-11) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.max_base_address, | 
 | 			   buffer); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Get Alignment (Bytes 12-15) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.alignment, buffer); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Get range_length (Bytes 16-19) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.memory32.range_length, buffer); | 
 |  | 
 | 	/* Set the Length parameter */ | 
 |  | 
 | 	output_struct->length = (u32) struct_size; | 
 |  | 
 | 	/* Return the final size of the structure */ | 
 |  | 
 | 	*structure_size = struct_size; | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_fixed_memory32_resource | 
 |  * | 
 |  * PARAMETERS:  byte_stream_buffer      - Pointer to the resource input byte | 
 |  *                                        stream | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        consumed the byte_stream_buffer is | 
 |  *                                        returned | 
 |  *              output_buffer           - Pointer to the return data buffer | 
 |  *              structure_size          - Pointer to where the number of bytes | 
 |  *                                        in the return data struct is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the resource byte stream and fill out the appropriate | 
 |  *              structure pointed to by the output_buffer. Return the | 
 |  *              number of bytes consumed from the byte stream. | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_rs_fixed_memory32_resource(u8 * byte_stream_buffer, | 
 | 				acpi_size * bytes_consumed, | 
 | 				u8 ** output_buffer, acpi_size * structure_size) | 
 | { | 
 | 	u8 *buffer = byte_stream_buffer; | 
 | 	struct acpi_resource *output_struct = (void *)*output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 | 	acpi_size struct_size = | 
 | 	    ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_mem32); | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_fixed_memory32_resource"); | 
 |  | 
 | 	/* Point past the Descriptor to get the number of bytes consumed */ | 
 |  | 
 | 	buffer += 1; | 
 | 	ACPI_MOVE_16_TO_16(&temp16, buffer); | 
 |  | 
 | 	buffer += 2; | 
 | 	*bytes_consumed = (acpi_size) temp16 + 3; | 
 |  | 
 | 	output_struct->id = ACPI_RSTYPE_FIXED_MEM32; | 
 |  | 
 | 	/* Check Byte 3 the Read/Write bit */ | 
 |  | 
 | 	temp8 = *buffer; | 
 | 	buffer += 1; | 
 | 	output_struct->data.fixed_memory32.read_write_attribute = temp8 & 0x01; | 
 |  | 
 | 	/* Get range_base_address (Bytes 4-7) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32. | 
 | 			   range_base_address, buffer); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Get range_length (Bytes 8-11) */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(&output_struct->data.fixed_memory32.range_length, | 
 | 			   buffer); | 
 |  | 
 | 	/* Set the Length parameter */ | 
 |  | 
 | 	output_struct->length = (u32) struct_size; | 
 |  | 
 | 	/* Return the final size of the structure */ | 
 |  | 
 | 	*structure_size = struct_size; | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_memory32_range_stream | 
 |  * | 
 |  * PARAMETERS:  linked_list             - Pointer to the resource linked list | 
 |  *              output_buffer           - Pointer to the user's return buffer | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        used in the output_buffer is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the linked list resource structure and fills in the | 
 |  *              the appropriate bytes in a byte stream | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_rs_memory32_range_stream(struct acpi_resource *linked_list, | 
 | 			      u8 ** output_buffer, acpi_size * bytes_consumed) | 
 | { | 
 | 	u8 *buffer = *output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_memory32_range_stream"); | 
 |  | 
 | 	/* The descriptor field is static */ | 
 |  | 
 | 	*buffer = 0x85; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* The length field is static */ | 
 |  | 
 | 	temp16 = 0x11; | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(buffer, &temp16); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the Information Byte */ | 
 |  | 
 | 	temp8 = (u8) (linked_list->data.memory32.read_write_attribute & 0x01); | 
 | 	*buffer = temp8; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* Set the Range minimum base address */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, | 
 | 			   &linked_list->data.memory32.min_base_address); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Set the Range maximum base address */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, | 
 | 			   &linked_list->data.memory32.max_base_address); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Set the base alignment */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.alignment); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Set the range length */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, &linked_list->data.memory32.range_length); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Return the number of bytes consumed in this operation */ | 
 |  | 
 | 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } | 
 |  | 
 | /******************************************************************************* | 
 |  * | 
 |  * FUNCTION:    acpi_rs_fixed_memory32_stream | 
 |  * | 
 |  * PARAMETERS:  linked_list             - Pointer to the resource linked list | 
 |  *              output_buffer           - Pointer to the user's return buffer | 
 |  *              bytes_consumed          - Pointer to where the number of bytes | 
 |  *                                        used in the output_buffer is returned | 
 |  * | 
 |  * RETURN:      Status | 
 |  * | 
 |  * DESCRIPTION: Take the linked list resource structure and fills in the | 
 |  *              the appropriate bytes in a byte stream | 
 |  * | 
 |  ******************************************************************************/ | 
 |  | 
 | acpi_status | 
 | acpi_rs_fixed_memory32_stream(struct acpi_resource *linked_list, | 
 | 			      u8 ** output_buffer, acpi_size * bytes_consumed) | 
 | { | 
 | 	u8 *buffer = *output_buffer; | 
 | 	u16 temp16 = 0; | 
 | 	u8 temp8 = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("rs_fixed_memory32_stream"); | 
 |  | 
 | 	/* The descriptor field is static */ | 
 |  | 
 | 	*buffer = 0x86; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* The length field is static */ | 
 |  | 
 | 	temp16 = 0x09; | 
 |  | 
 | 	ACPI_MOVE_16_TO_16(buffer, &temp16); | 
 | 	buffer += 2; | 
 |  | 
 | 	/* Set the Information Byte */ | 
 |  | 
 | 	temp8 = | 
 | 	    (u8) (linked_list->data.fixed_memory32.read_write_attribute & 0x01); | 
 | 	*buffer = temp8; | 
 | 	buffer += 1; | 
 |  | 
 | 	/* Set the Range base address */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, | 
 | 			   &linked_list->data.fixed_memory32. | 
 | 			   range_base_address); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Set the range length */ | 
 |  | 
 | 	ACPI_MOVE_32_TO_32(buffer, | 
 | 			   &linked_list->data.fixed_memory32.range_length); | 
 | 	buffer += 4; | 
 |  | 
 | 	/* Return the number of bytes consumed in this operation */ | 
 |  | 
 | 	*bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); | 
 | 	return_ACPI_STATUS(AE_OK); | 
 | } |